Effect of temperature on acid–base equilibria in separation techniques. A review

Directional growth of octacalcium phosphate using micro-flow reactor mixing and subsequent aging

Well-defined belt-shaped particles of octacalcium phosphate were prepared by mixing aqueous solutions of calcium acetate and that of sodium phosphate monobasic with the aid of a micro-flow reactor. Higher crystallinity and narrower particle size distribution were achieved by the micro-flow reactor if compared with the results of the batch reaction using the same solutions. The width of the belt was controlled by the mixing temperature (0.8 and 2.3 μm for the preparation at 50 and 70 °C, respectively). Post mixing aging at 50 °C, resulted in the directional growth of belt-shaped particles to obtain particles with the length of 17 μm (aspect ratio of 53). XRD and TEM analysis indicated that the micro-flow reactor could separate nucleation and growth allowing preferential growth along the a-direction.

Well-defined octacalcium phosphate particles with varied size and aspect ratio were prepared by a micro-flow reactor mixing and subsequent aging in different temperature and aging time.

Cyclic band compression in toroidal capillary electrophoresis delivers an unlimited number of theoretical plates with a quadratic growth in time and a constant peak capacity

Analytical instruments able to provide extremely high sensitivities, separation efficiencies, and peak capacities are important for both applied sciences and basic research. It is even more interesting if this can be achieved within organic, aqueous, and physiological solutions without restricting the operation parameters, such as buffer pH, temperature, ionic strength, and background electrolyte composition. Toroidal capillary electrophoresis offers this potential, as was recently proposed and demonstrated. In this platform, the analytes perform continuous round trips inside a fused-silica capillary having a torus-like shape. In the present work, the equations of the number of plates and peak capacity are deduced when on-column cyclic thermal band compression is applied. They are expressed as a function of the number of turns performed by the analyte, axial length of the toroid, number of microholes (reservoirs), compression factor, number of compression events performed per turn, and applied voltage. It was found that the variances of the bands reach a steady state, regardless of the number of dispersion mechanisms present. Consequently, the number of theoretical plates grows indefinitely as the square of time. The expression of peak capacity shows a well-defined limiting value that remains constant over time.

pH Effects on Electrospray Ionization Efficiency

Electrospray ionization efficiency is known to be affected by mobile phase composition. In this paper, a detailed study of analyte ionization efficiency dependence on mobile phase pH is presented. The pH effect was studied on 28 compounds with different chemical properties. Neither pK _a nor solution phase ionization degree by itself was observed to be sufficient at describing how aqueous phase pH affects the ionization efficiency of the analyte. Therefore, the analyte behavior was related to various physicochemical properties via linear discriminant analyses. Distinction between pH-dependent and pH-independent compounds was achieved using two parameters: number of potential charge centers and hydrogen bonding acceptor capacity (in the case of 80% acetonitrile) or polarity of neutral form of analyte and pK _a (in the case of 20% acetonitrile). It was also observed that decreasing pH may increase ionization efficiency of a compound by more than two orders of magnitude. Graphical Abstract ᅟ.

Seven Approaches to Elimination of the Inherent Systematic Errors in Determination of Electrophoretic Mobility by Capillary Electrophoresis

Electrophoretic mobility is a basic parameter that describes the electromigration of an ionized particle, which is used in many fields of analytical and physicochemical science. Its determination by capillary electrophoresis (CE), using a routine method, is intrinsically affected by the generation of Joule heating, entailing a drop in viscosity and possible alteration of the degree of ionization, and also by other commonly overlooked effects: axial electric field distortion and voltage ramping. The objective of this work was to provide the first theoretical overview and experimental comparison of all accessible methods that could be used to prevent these sources of inaccuracy. We have discussed seven independent approaches: (i) extrapolation of mobility to the zero power, (ii) initial buffer resistance-based correction, (iii) rational cooling adjustment, (iv) elimination of the nonthermostated capillary part, (v) inter/extrapolation to the nominal temperature, (vi) internal standard-based correction, and (vii) simple recalculation based on the temperature rise. Two methodologies (v and vi) have been proposed for the first time. Furthermore, we have shown how some approaches can be further developed, obtaining several novel and more sophisticated methods, which are also included in the comparison. Our investigation will help researchers to choose the optimal approach. We have also demonstrated for the first time how to measure the independent impact of four different effects. The outcomes reveal the compensatory character of some phenomena and explain the highly diverse and unpredictable magnitude of the total errors. The use of a correction method seems crucial for ensuring the high reliability of CE-based analyses.

Role of Buffers in Protein Formulations

Buffers comprise an integral component of protein formulations. Not only do they function to regulate shifts in pH, they also can stabilize proteins by a variety of mechanisms. The ability of buffers to stabilize therapeutic proteins whether in liquid formulations, frozen solutions, or the solid state is highlighted in this review. Addition of buffers can result in increased conformational stability of proteins, whether by ligand binding or by an excluded solute mechanism. In addition, they can alter the colloidal stability of proteins and modulate interfacial damage. Buffers can also lead to destabilization of proteins, and the stability of buffers themselves is presented. Furthermore, the potential safety and toxicity issues of buffers are discussed, with a special emphasis on the influence of buffers on the perceived pain upon injection. Finally, the interaction of buffers with other excipients is examined.