Mapping Cd²⁺-induced membrane permeability changes of single live cells by means of scanning electrochemical microscopy

Investigating the Role of Extracellular Matrix Stiffness in Modulating the Ferroptosis Process in Hepatocellular Carcinoma Cells via Scanning Electrochemical Microscopy

Extracellular matrix (ECM) stiffness modulates a variety of cellular processes, including ferroptosis, a process with significant potential implications for hepatocellular carcinoma (HCC) fibrosis and cirrhosis. However, the exact relationship between ECM stiffness and HCC ferroptosis is yet unclarified, partially due to the lack of in situ information on key parameters of the ferroptosis process of living HCC cells. This study pioneers the use of in vitro mechanical microenvironment models of HCC and the scanning electrochemical microscopy (SECM) technique for understanding this interplay. We first cultured HuH7 cells on 4.0, 18.0, and 44.0 kPa polyacrylamide (PA) gels to simulate early, intermediate, and advanced HCC ECM stiffness, respectively. Then, we used SECM to in situ monitor changes in cell membrane permeability, respiratory activity, and reactive oxygen species (ROS) levels of erastin-induced HuH7 cells on PA gels, finding that increasing ECM stiffness potentiates ferroptosis, including increased membrane permeabilization and H2O2 release as well as reduced respiratory activity. Through further transcriptome sequencing and molecular biology measurements, we identified a critical role for focal adhesion kinase (FAK)-mediated yes-associated protein (YAP) in regulating the ferroptosis process dependent on ECM stiffness, which provides novel insights into the mechanical regulation of ferroptosis in HCC cells and may pave the way for innovative therapeutic strategies.

Temperature Effect on the Electrochemical Current Response during Scanning Electrochemical Microscopy of Living Cells

Scanning electrochemical microscopy (SECM) is being used increasingly to monitor electrochemical processes at the interface of living cells and electrodes. This allows the detection and quantification of biomarkers that further the understanding of various diseases. Rapid SECM experiments are often carried out without monitoring the analyte solution temperature or are performed at room temperature. The reported research demonstrates that temperature control is crucial during SECM imaging of living cells to obtain reliable data. In this study, a SECM-integrated thermostatic ring on the sample stage enabled imaging of living biological cells in a constant height mode at various temperatures. Two-dimensional line scans were conducted while scanning single Adenocarcinoma Cervical cancer (HeLa) cells. Numerical modeling was carried out to evaluate the effect of the temperature on the electrochemical current response of living cells to compare the apparent heterogeneous rate constant (k0), representing cellular reaction kinetics. This study reveals that even slight temperature variations of approximately 2 °C affect the reaction kinetics of single living cells, altering the measured current during SECM.

Effect of Exogenous Electric Stimulation on the Cardiac Tissue Function In Situ Monitored by Scanning Electrochemical Microscopy

Cardiac tissue is sensitive to and can be easily damaged by exogenous electric stimulation. However, due to the thermal-electric coeffect and the limitation of in situ and quantitative information on the cardiac tissue function under electric stimulation, the detailed effect and the underlying mechanism of exogenous electric stimulation on the cardiac tissue remain elusive. To address this, in this work, we first constructed an in vitro cardiac tissue model and established a thermal-electric coupled theoretical model for simulating the electric field and temperature distributions around the cardiac tissue, from which we selected the electric field strengths (1.19, 2.37, and 3.39 kV cm^-1) and electrical energies (0.001, 0.005, and 0.011 J) for electric stimulations without inducing a thermal effect. Then, we applied electric field stimulations on the cardiac tissue using these parameters and scanning electrochemical microscopy (SECM) to in situ and quantitatively monitor the dynamic changes in the key parameters of the cardiac tissue function, including respiratory activity, membrane permeability, and contraction frequency, after electric field stimulations. The SECM results showed that the oxygen consumption, cell membrane permeability coefficient, and contraction frequency of the cardiac tissue were strongly dependent on electrical energy, especially when the electrical energy was higher than 0.001 J. Our work, for the first time, achieves the in situ and quantitative monitoring of the cardiac tissue function under electric stimulation using SECM, which would provide important references for designing an electric stimulation regime for cardiac tissue engineering and clinical application of electrotherapy.

In Situ and Quantitatively Monitoring the Dynamic Process of Ferroptosis in Single Cancer Cells by Scanning Electrochemical Microscopy

Ferroptosis, as a promising therapeutic strategy for cancers, has aroused great interest. Quantifying the quick dynamic changes in key parameters during the early course of ferroptosis can provide insights for understanding the underlying mechanisms of ferroptosis and help the development of therapies targeting ferroptosis. However, in situ and quantitatively monitoring the quick responses of living cancer cells to ferroptosis at the single-cell level remains technically challenging. In this work, we selected HuH7 cells (hepatocellular carcinoma (HCC) cells) as a cell model and Erastin as a typical ferroptosis inducer. We utilized scanning electrochemical microscopy (SECM) to quantitatively and in situ monitor the early course of ferroptosis in HuH7 cells by characterizing the three key parameters of cell ferroptosis (i.e., cell membrane permeability, respiratory activity, and the redox state). The SECM results show that the membrane permeability of ferroptotic HuH7 cells continuously increased from 0 to 8.1 × 10-5 m s-1, the cellular oxygen consumption was continuously reduced by half, and H2O2 released from the cells exhibited periodic bursts during the early course of ferroptosis, indicating the gradually destroyed cell membrane structure and intensified oxidative stress. Our work realizes, for the first time, the in situ and quantitative monitoring of the cell membrane permeability, respiratory activity, and H2O2 level of the early ferroptosis process of a single living cancer cell with SECM, which can contribute to the understanding of the physiological process and underlying mechanisms of ferroptosis.

In Situ and Quantitatively Imaging of Heat-Induced Oxidative State and Oxidative Damage of Living Neurons Using Scanning Electrochemical Microscopy

Central nervous system is sensitive and vulnerable to heat. Oxidative state and oxidative damage of neurons under heat stress are vital for understanding early consequences and mechanisms of heat-related neuronal injury, which remains elusive partly due to the technical challenge of in situ and quantitative monitoring methods. Herein, a temperature-controlled scanning electrochemical microscopy (SECM) platform with programmable pulse potential and depth scan modes is developed for in situ and quantitatively monitoring of oxygen consumption, extracellular hydrogen peroxide level, and cell membrane permeability of neurons under thermal microenvironment of 37-42 °C. The SECM results show that neuronal oxygen consumption reaches a maximum at 40 °C and then decreases, extracellular H₂ O₂ level increases from 39 °C, and membrane permeability increases from 2.0 ± 0.6 × 10^-5 to 7.2 ± 0.8 × 10^-5 m s^-1 from 39 to 42 °C. The therapeutic effect on oxidative damage of neurons under hyperthermia conditions (40-42 °C) is further evaluated by SECM and fluorescence methods, which can be partially alleviated by the potent antioxidant edaravone. This work realizes in situ and quantitatively observing the heat-induced oxidative state and oxidative damage of living neurons using SECM for the first time, which results can contribute to a better understanding of the heat-related cellular injury mechanism.

Comparative analysis unveils the cadmium-induced reproductive toxicity on the testes of Pardosa pseudoannulata

Cadmium (Cd) pollution is one of the most serious heavy metal pollutions in the world, which has been demonstrated to cause different toxicities to living organisms. Cd has been widely suggested to cause reproductive toxicity to vertebrates, yet its reproductive toxicity to invertebrates is not comprehensive. In this study, the wolf spider Pardosa pseudoannulata was used as a bioindicator to evaluate the male reproductive toxicity of invertebrates under Cd stress. Cd stress had no effect on the color, size and length of testis. However, Cd significantly increased the contents of catalase, glutathione peroxidase and malondialdehyde, the antioxidants in the testis of P. pseudoannulata. Then we analyzed the transcriptome of testis exposed to Cd, and identified a total of 4739 differentially expressed genes (DEGs) compared to control, with 2368 up-regulated and 2371 down-regulated. The enrichment analysis showed that Cd stress could affect spermatogenesis, sperm motility, post-embryonic development, oxidative phosphorylation and metabolism and synthesis of male reproductive components. At the same time, the protein-protein interaction network was constructed with the generated DEGs. Combined with the enrichment analysis of key modules, it revealed that Cd stress could further affect the metabolic process in testis. In general, the analysis of testicular damage and transcriptome under Cd stress can provide a novel insight into the reproductive toxicity of Cd on rice filed arthropods and offer a reference for the protection of rice filed spiders under Cd pollution.

In situ monitoring of the effect of Cu2+ on the membrane permeability of a single living cell with a dual-electrode tip of a scanning electrochemical microscope

Here, an Au-Cu dual-electrode tip was designed to monitor the effect of Cu²⁺ on the membrane permeability of a single living cell in situ using scanning electrochemical microscopy. The probe approach curves (PACs) were obtained using potassium ferricyanide as a redox mediator. Meanwhile, according to the simulation, theoretical PACs could be acquired. Thus, the cell membrane permeability coefficient (P_m) values were obtained by overlapping the experimental PACs with the theoretical values. Cu²⁺ was directly generated by electrolyzing the Cu electrode of the dual-electrode tip to investigate its effect on the cell membrane permeability in situ. This work has potential value to improve the understanding of the mechanism of acute heavy metal damage on the cell membrane and will also help clarify the role of heavy metal ions in physiological or pathological processes.

Electroporation of a hybrid bilayer membrane by scanning electrochemical microscope

A novel method, suitable for targeted electroporation of hybrid bilayer membranes (hBLMs) by scanning electrochemical microscope (SECM) is introduced by this work. A redox-probe-free system was applied for (i) SECM-based electroporation of a hBLM and for (ii) SECM-based visualization of pores formed by SECM-based electroporation in the hBLM. The hBLM was formed on a glass substrate modified by fluorine-doped tin oxide, and the structure (glass/FTO/hBLM) was used for further investigations. A specific 'constant-current region' at 1-30 µm distances between the UME and the hBLM surface was observed in the approach curves, which were registered while a Pt-based ultramicroelectrode (UME) was approaching the glass/FTO/hBLM surface. This 'constant-current region' was used as the characteristic feature for characterisation of the hBLM, and by assessment of the approach curves it was possible to distinguish whether an area of the hBLM was electroporated. SECM-based electroporation of the hBLM was performed by using increased potential difference between the reference electrode and the UME. Depending on the duration of the applied potential-pulse and on the distance between the UME and the hBLM surface, irreversible or reversible electroporation of the hBLM was achieved. The data shows that SECM can be successfully applied for both electroporation and characterisation of the hBLM.

Effect of Substrate Stiffness on Redox State of Single Cardiomyocyte: A Scanning Electrochemical Microscopy Study

Mechanical microenvironment plays a key role in the regulation of the phenotype and function of cardiac cells, which are strongly associated with the intracellular redox mechanism of cardiomyocytes. However, the relationship between the redox state of cardiomyocytes and their mechanical microenvironment remains elusive. In this work, we used polyacrylamide (PA) gels with varying stiffness (6.5-92.5 kPa) as the substrate to construct a mechanical microenvironment for cardiomyocytes. Then we employed scanning electrochemical microscopy (SECM) to in situ characterize the redox state of a single cardiomyocyte in terms of the apparent rate constant (k_f) of the regeneration rate of ferrocenecarboxylic by glutathione (GSH) released from cardiomyocyte, which is the most abundant reactant of intracellular reductive-oxidative metabolic cycles in cells and can represent the redox level of cardiomyocytes. The obtained SECM results show that the cardiomyocytes cultured on the stiffer substrates present lower k_f values than those on the softer ones, that is, the more oxidative state of cardiomyocytes on the stiffer substrates compared to those on the softer ones. It proves the relationship between mechanical factors and the redox state of cardiomyocytes. This work can contribute to understanding the intracellular chemical process of cardiomyocytes during physiopathologic conditions. Besides, it also provides a new SECM method to in situ investigate the redox mechanism of cardiomyocytes at a single-cell level.

Correlating Live Cell Viability with Membrane Permeability Disruption Induced by Trivalent Chromium

Cr(III) is often regarded as a trace essential micronutrient that can be found in many dietary supplements due to its participation in blood glucose regulation. However, increased levels of exposure have been linked to adverse health effects in living organisms. Herein, scanning electrochemical microscopy (SECM) was used to detect variation in membrane permeability of single cells (T24) resulting from exposure to a trivalent Cr-salt, CrCl₃. By employing electrochemical mediators, ferrocenemethanol (FcMeOH) and ferrocenecarboxylic acid (FcCOO^-), initially semipermeable and impermeable, respectively, complementary information was obtained. Three-dimensional COMSOL finite element analysis simulations were successfully used to quantify the permeability coefficients of each mediator by matching experimental and simulated results. Depending on the concentration of Cr(III) administered, three regions of membrane response were detected. Following exposure to low concentrations (up to 500 μM Cr(III)), their permeability coefficients were comparable to that of control cells, 80 μm/s for FcMeOH and 0 μm/s for FcCOO^-. This was confirmed for both mediators. As the incubation concentrations were increased, the ability of FcMeOH to permeate the membrane decreased to a minimum of 17 μm/s at 7500 μM Cr(III), while FcCOO^- remained impermeable. At the highest examined concentrations, both mediators were found to demonstrate increased membrane permeability. 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide cell viability studies were also conducted on Cr(III)-treated T24 cells to correlate the SECM findings with the toxicity effects of the metal. The viability experiments revealed a similar concentration-dependent trend to the SECM cell membrane permeability study.

Single-cell assay on microfluidic devices

Advances in microfluidic techniques have prompted researchers to study the inherent heterogeneity of single cells in cell populations.

Analysing single live cells by scanning electrochemical microscopy

Scanning electrochemical microscopy (SECM) offers single live cell activities along its topography toward cellular physiology and pathology.

Biological imaging with scanning electrochemical microscopy

Scanning electrochemical microscopy (SECM) is a powerful and versatile technique for visualizing the local electrochemical activity of a surface as an ultramicroelectrode tip is moved towards or over a sample of interest using precise positioning systems. In comparison with other scanning probe techniques, SECM not only enables topographical surface mapping but also gathers chemical information with high spatial resolution. Considerable progress has been made in the analysis of biological samples, including living cells and immobilized biomacromolecules such as enzymes, antibodies and DNA fragments. Moreover, combinations of SECM with comple-mentary analytical tools broadened its applicability and facilitated multi-functional analysis with extended life science capabilities. The aim of this review is to present a brief topical overview on recent applications of biological SECM, with particular emphasis on important technical improvements of this surface imaging technique, recommended applications and future trends.

Recent Advances in Scanning Electrochemical Microscopy for Biological Applications

Scanning electrochemical microscopy (SECM) is a chemical microscopy technique with high spatial resolution for imaging sample topography and mapping specific chemical species in liquid environments. With the development of smaller, more sensitive ultramicroelectrodes (UMEs) and more precise computer-controlled measurements, SECM has been widely used to study biological systems over the past three decades. Recent methodological breakthroughs have popularized SECM as a tool for investigating molecular-level chemical reactions. The most common applications include monitoring and analyzing the biological processes associated with enzymatic activity and DNA, and the physiological activity of living cells and other microorganisms. The present article first introduces the basic principles of SECM, followed by an updated review of the applications of SECM in biological studies on enzymes, DNA, proteins, and living cells. Particularly, the potential of SECM for investigating bacterial and biofilm activities is discussed.

Submicron probes for scanning electrochemical microscopy

To improve the spatial resolutions of scanning electrochemical microscopy (SECM) imaging, the laser-pulled submicron electrode fabrication method was explored in this work. Manual polishing of a laser-pulled Pt nanoelectrode exposed a Pt tip diameter of 250 nm with a ratio of the tip glass to exposed Pt disc (RG) of 30. This fabricated submicron probe was then utilized to study the electrochemical functionality of an independently addressable microband electrodes (IAME) sample using SECM. In the constant imaging mode of SECM, where the probe is scanned linearly across the sample at a fixed z position, SECM demonstrated higher resolution than that of the conventional micrometer electrodes when the feedback currents from the Pt and glass microbands were characterized. In addition, the depth scan imaging mode of SECM was also used to extract experimental horizontal line scans and probe approach curves for analysis. Three-dimensional (3D) simulations of the IAME–SECM probe experiments were explored for the first time to quantify the tip-to-sample distances, tilt angle of the sample (or electrode), and height of the Pt microbands. The experimentally characterized height was found to be similar to manufacturer specification (125 nm vs 110 nm). Furthermore, the more computationally demanding 3D simulation of the true IAME sample geometry (110 nm height of the Pt microbands) revealed minimal difference in feedback behaviours in comparison with the idealized flat geometry. The removal of this simulation complexity was proved to be sufficient for SECM analysis of the IAME sample by a 250 nm Pt probe, which greatly saves computation resources.