Conductive polymeric ionic liquids for electroanalysis and solid-phase microextraction

Magnetic ionic liquid-based liquid-liquid microextraction followed by ultra-performance liquid chromatography coupled with triple-quadrupole tandem mass spectrometry for simultaneous determination of neurotransmitters in human cerebrospinal fluid and plasma

A green, efficient and easy sample pretreatment method of magnetic ionic liquid-based liquid-liquid microextraction (MIL-based LLME) combined with a sensitive, rapid and precise analytical method of ultra-performance liquid chromatography coupled with triple-quadrupole tandem mass spectrometry (UPLC-QqQ/MS²) was developed to simultaneously - determining of neurotransmitters (NTs) in biosamples. Two magnetic ionic liquids (MILs), [P_6,6,6,14]₃[GdCl₆] and [P_6,6,6,14]₂[CoCl₄] tested, and the latter was selected as the extraction solvent due to its advantages of visual recognition, paramagnetic behavior and higher extraction efficiency. Facile magnetic separation of MIL containing analytes from matrix was realized by applying external magnetic field without rather than centrifugation. Experimental parameters that would influence the extraction efficiency, including type and amount of MIL, extraction time, speed of the vortex process, salt concentration, and environmental pH, were optimized obtained. The proposed method was successfully applied to the simultaneous extraction and determination of 20 NTs in human cerebrospinal fluid and plasma samples. Excellent analytical performance indicates the broad potential of this method for clinical diagnosis and therapy of neurological diseases.

Analytical perspective and environmental remediation potentials of magnetic composite nanosorbents

The synthesis and application of magnetic nanosorbents to remove emerging pollutants have been considered the best environmental remediation and sustainability option. Incorporating magnetism shortens the treatment time and allows the sorbent to be recovered quickly using external magnetic with many cycles. The implementation of magnetic solid-phase extraction (MSPE) using magnetic materials of different shapes, sizes, and surface morphology can be a valuable tool in applying materials to prepare analytical samples. In MSPE applications, materials with strong magnetic domain can be used as precursors for constructing magnetic composite as a promising sorbent. This article focuses on the most recent and exceptional applications of magnetic adsorbents for preconcentration and removal purposes. Magnetic adsorbents, such as nanoparticles (NPs), foam, sponges, nanocomposites, hydrogels, and beads with multifunctional attributes have been comprehensively studied in terms of preparation procedures, limitations, advantages, and interactions between pollutants and magnetic composites. The role of magnetic sorbents in sample preparation methods, such as simple solid-phase extraction and microextraction, as well as sorptive extraction using a stir bar, was also examined. The use of magnetic adsorbents with analytical techniques, such as solid-phase extraction and solid-phase microextraction improves the method for preparing samples concerning the influential role of magnetic adsorbents. Towards the end, promising features and future outlook are also directed.

Electropolymerization of Pyrrole-Based Ionic Liquids on Selected Wireless Bipolar Electrodes

This paper describes an electropolymerization-based on-chip valving system, accomplished by electrosynthesis of conductive polymeric ionic liquid (CPIL) films at selected points within an array of bipolar electrodes (BPEs), in which each of these wireless electrodes spans an IL-aqueous phase boundary. The low viscosity and high hydrophobicity of the CPIL precursor allow it to be patterned by established microfluidic methods. This advancement has the potential to impact microscale analysis because it allows on-demand creation of solid CPIL microstructures at locations specified by microfluidics, phase boundaries, and electrode potentials. To achieve this outcome, an imidazolium-based IL was functionalized with a pyrrole moiety, and the viscosity was tuned by choosing the appropriate counterion to form a CPIL with the desired viscosity, hydrophobicity, and oxidation potential. This monomer species was then introduced into a microfluidic device, which was prefilled with an aqueous buffer solution. The device comprised many parallel microchannels lined with nanoliter-scale chambers. BPEs interconnected the channels such that the BPE tips were each aligned to a chamber opening. The electrodes contacting the outermost channels were connected directly to a power supply and functioned as driving electrodes. The CPIL displaced the buffer in the channels and established a phase boundary at the opening of each chamber, thereby digitizing the aqueous phase. Finally, an alternating square waveform (under mode 1) was applied for 5 min to yield immobilized polymer films at a location defined by the BPE poles. In total, three modes were developed and three corresponding polymer film patterns were formed. Under mode 2, a DC power supply was used to achieve a dissymmetrical polymer film pattern, and, under mode 3, a regional polymer film pattern was formed under an AC potential with a DC offset. Our preliminary results demonstrate that the generated polymer films are immobile and sufficiently thick to seal the chambers at room temperature over the duration of our observation window (50 min), and this seal is maintained even at elevated temperatures that induce partial evaporation of the chamber contents. A key point is that this method is compatible with a preceding step─dielectrophoretic capture of single melanoma cells within the nanoliter-scale chambers.

Electrochemical Synthesis of Unique Nanomaterials in Ionic Liquids

The review considers the features of the processes of the electrochemical synthesis of nanostructures in ionic liquids (ILs), including the production of carbon nanomaterials, silicon and germanium nanoparticles, metallic nanoparticles, nanomaterials and surface nanostructures based on oxides. In addition, the analysis of works on the synthesis of nanoscale polymer films of conductive polymers prepared using ionic liquids by electrochemical methods is given. The purpose of the review is to dwell upon an aspect of the applicability of ILs that is usually not fully reflected in modern literature, the synthesis of nanostructures (including unique ones that cannot be obtained in other electrolytes). The current underestimation of ILs as an electrochemical medium for the synthesis of nanomaterials may limit our understanding and the scope of their potential application. Another purpose of our review is to expand their possible application and to show the relative simplicity of the experimental part of the work.

Temperature and time-controlled hydrothermal growth and sorption selectivity of titania nanowires on titanium fiber for highly efficient solid-phase microextraction

Two kinds of TiO₂ nanowires (TiO₂NWs) with different orientation were in-situ grown on Ti substrates by controlling temperature and time during the hydrothermal process. The adsorption performance was evaluated by using typical aromatic compounds as model analytes coupled to HPLC with UV detection. The results demonstrated that the TiO₂NWs coating grown at higher temperature within longer time had better affinity towards PAHs. For this purpose, the key experimental factors affecting the adsorption performance of the TiO₂NWs coating fabricated at 200 °C for 10 h were further investigated and optimized for the extraction of PAHs. Under the optimized conditions, the proposed method presented linear responses in the concentration ranges of 0.05 to 200 μg·L^-1 PAHs with correlation coefficients more than 0.998. LODs (S/N=3) were 0.008 to 0.034 μg·L^-1. Moreover, RSDs for the single fiber repeatability of the intra-day and the inter-day analyses were less than 5.6% (n=5) and 5.8%, respectively. RSDs for the fiber-to-fiber reproducibility were between 5.1% and 6.5%. Finally, the proposed method was successfully applied to the selective preconcentration and determination of trace PAHs in environmental water samples. In addition, The fabricated Ti fiber can be used at least 200 times due to its high mechanical and chemical stability.

Thin Porous Poly(ionic liquid) Coatings for Enhanced Headspace Solid Phase Microextraction

In this contribution, thin poly(ionic liquid) (PIL) coatings with a well-defined pore structure built up from interpolyelectrolyte complexation between a PIL and poly(acrylic acid) (PAA) were successfully used for enhanced solid phase microextraction (SPME). The introduction of porosity with tunable polarity through the highly versatile PIL chemistry clearly boosts the potential of SPME in the detection of compounds at rather low concentrations. This work will inspire researchers to further explore the potential of porous poly(ionic liquid) materials in sensing and separation applications.

The geometrical characteristics of nickel-based metal organic framework on its entrapment capability

Here, a three dimensional nickel-based metal organic framework (MOF) was synthesized via solvothermal and room temperature protocols. In order to study the effects of the synthesis conditions on the physical properties such as pore sizes and shapes of the prepared MOFs, their extraction capabilities were examined. Both MOFs were characterized by Fourier transform infrared spectroscopy, powder X-ray diffraction, scanning electron microscopy, Brunauer-Emmett-Teller and thermogravimetric analyses. Brilliant properties such as porous structure, high surface area and considerable thermal stability make them reasonable candidates to be employed as efficient extractive phases. The efficiency of the superior nickel-based MOF was evaluated for headspace needle trap extraction of chlorobenzenes as model compounds in conjunction with gas chromatography-mass spectrometry (GC-MS). The MOF-based extractive phase was conveniently packed in a needle trap device and after extraction, the desorption process was performed via direct insertion of needle into the GC inlet. After optimizing the extraction/desorption conditions, the figures of merit such as linear dynamic range was in the range of 5-1000 ng L^-1 (R² > 0.987) while the limits of detection and quantification values were 2-10 and 6-30 ng L^-1, respectively. The intra- and inter-day relative standard deviations for three replicates at the concentration level of 50 ng L^-1 were in the range of 7-9% and 9-12%, respectively. The needle-to-needle reproducibility was also found to be in the range of 5-11%. Acceptable relative recovery values at the concentration level of 50 ng L^-1 ranged from 85 to 96%, showing no significant matrix effect.

Synthesis and Properties of Magnetic Aryl-Imidazolium Ionic Liquids with Dual Brønsted/Lewis Acidity

A series of unique tunable aryl-imidazolium magnetic ionic liquids (MILs) with dual acidity that contain both Brønsted and Lewis acidic sites (abbreviated as B-L MILs) were synthesized and characterized using nuclear magnetic resonance and mass spectrometry. Physical properties, such as thermal properties, magnetic susceptibility, and Brønsted and Lewis acidity, were measured. These properties were found to depend on the cation structure. These B-L MILs had good solubility in many organic solvents, good thermal stability, and low melting points, and exhibited magnet-like behavior. For these B-L MILs, the Brønsted acidity was measured using ultraviolet-visible (UV-Vis), and the Lewis acidity was measured using Fourier transform infrared spectroscopy (FTIR). The results showed that B-L MILs with an electron-withdrawing group in the aryl-imidazolium moiety had higher Brønsted acidity, whereas those with an electron-donating group had higher Lewis acidity. This type of ionic liquid, with both Brønsted and Lewis acidic sites, is expected to be a useful solvent and catalyst for organic reactions.

Affinity Ionic Liquids for Chemoselective Gas Sensing

Selective gas sensing is of great importance for applications in health, safety, military, industry and environment. Many man-made and naturally occurring volatile organic compounds (VOCs) can harmfully affect human health or cause impairment to the environment. Gas analysis based on different principles has been developed to convert gaseous analytes into readable output signals. However, gas sensors such as metal-oxide semiconductors suffer from high operating temperatures that are impractical and therefore have limited its applications. The cost-effective quartz crystal microbalance (QCM) device represents an excellent platform if sensitive, selective and versatile sensing materials were available. Recent advances in affinity ionic liquids (AILs) have led them to incorporation with QCM to be highly sensitive for real-time detection of target gases at ambient temperature. The tailorable functional groups in AIL structures allow for chemoselective reaction with target analytes for single digit parts-per-billion detection on mass-sensitive QCM. This structural diversity makes AILs promising for the creation of a library of chemical sensor arrays that could be designed to efficiently detect gas mixtures simultaneously as a potential electronic in future. This review first provides brief introduction to some conventional gas sensing technologies and then delivers the latest results on our development of chemoselective AIL-on-QCM methods.

Electropolymerized Pyrrole-Based Conductive Polymeric Ionic Liquids and Their Application for Solid-Phase Microextraction

Pyrrole was covalently bonded to 1-methyl and 1-benzylimidazolium ionic liquids (ILs) via an N-substituted alkyl linkage to prepare electropolymerizable IL monomers with excellent thermal stability. The methylimidazolium IL, [pyrrole-C₆MIm]⁺, was then electropolymerized on macro- and microelectrode materials to form conductive polymeric IL (CPIL)-modified surfaces. Electrochemical characterization of a 1.6 mm diameter Pt disk electrode modified with poly[pyrrole-C₆MIm]⁺ demonstrated a selective uptake for an anionic redox probe while rejecting a cationic redox probe. Furthermore, electropolymerization of [pyrrole-C₆MIm]⁺ doped with single-walled carbon nanotubes (SWNT) on 125 μm platinum wires produced 42 μm thick poly[pyrrole-C₆MIm]⁺/SWNT films compared to 17 μm in the absence of SWNT and 5 μm for the previously reported poly[thiophene-C₆MIm]⁺ coatings. The poly[pyrrole-C₆MIm]⁺/SWNT films were prepared with reproducible thicknesses as well as thermal properties sufficient for high-temperature applications, such as solid-phase microextraction (SPME) with gas chromatographic analysis. The utilization of the CPIL sorbent materials in SPME experiments provided excellent extraction efficiencies and selectivity toward organic aromatic analytes. The CPIL sorbent coatings also yielded outstanding fiber-to-fiber reproducibility on the basis of extraction efficiencies and improved response for a range of analytes relative to commercial 100 μm poly(dimethylsiloxane) fibers when normalized for differences in film thickness. Poly[pyrrole-C₆MIm]⁺ CPIL coatings doped with SWNT are therefore promising new sorbent materials for SPME analyses.

Review of geometries and coating materials in solid phase microextraction: Opportunities, limitations, and future perspectives

The development of new support and geometries of solid phase microextraction (SPME), including metal fiber assemblies, coated-tip, and thin film microextraction (TFME) (i.e. self-supported, fabric and blade supported), as well as their effects on diffusion and extraction rate of analytes were discussed in the current review. Application of main techniques widely used for preparation of a variety of coating materials of SPME, including sol-gel technique, electrochemical and electrospinning methods as well as the available commercial coatings, were presented. Advantages and limitations of each technique from several aspects, such as range of application, biocompatibility, availability in different geometrical configurations, method of preparation, incorporation of various materials to tune the coating properties, and thermal and physical stability, were also investigated. Future perspectives of each technique to improve the efficiency and stability of the coatings were also summarized. Some interesting materials including ionic liquids (ILs), metal organic frameworks (MOFs) and particle loaded coatings were briefly presented.

Doping of three-dimensional porous carbon nanotube-graphene-ionic liquid composite into polyaniline for the headspace solid-phase microextraction and gas chromatography determination of alcohols

In this work, ionic liquid (IL, i.e. 1-hydroxyethyl-3-methylimidazolium tetrafluoroborate), carboxyl multiwall carbon nanotubes (MWCNTs) and reduced graphene oxide (rGO) were used to prepare three-dimensional porous material (MWCNTs-rGO-IL) by one-step self-assembly, then it was co-electrodeposited with polyaniline (PANI) on stainless steel wires by cyclic voltammetry. The resulting coating (PANI-MWCNTs-rGO-IL) was characterized by using FT-IR and scanning electron microscopy etc, and it showed porous structure and had high thermal stability. Furthermore, it was found to be very suitable for the headspace solid-phase microextraction of alcohols (i.e. octanol, nonanol, geraniol, decanol, undecanol and dodecanol). By coupling with gas chromatography, wide linear ranges and low limits of detection (i.e. 2.2-28.3 ng L^-1) were obtained for the alcohols. The coating also presented good repeatability and reproducibility; the relative standard deviations for intra-fiber and fiber-to-fiber were less than 5.6% (n = 5) and 7.0% (n = 5) respectively. In addition, the proposed method was successfully applied to the determination of alcohols in tea drinks, and the recoveries for standards added were 85.6-114%.