Fluorimetric detection of pathogenic bacteria using magnetic carbon dots

A novel biosensor MDC@N-MMCNs to selective detection and elimination of foodborne bacterial pathogens

BACKGROUND

Infections caused by foodborne pathogens pose a major threat to human health. Traditional bacterial detection methods, such as plate culture and polymerase chain reaction, cannot meet the growing demand for fast and accurate detection. In contrast, colorimetric sensors have the characteristics of convenience, speed, and visualization, but their specific sensitivity is relatively poor. Therefore, it is necessary to develop a biosensor with selective identification of foodborne pathogens, high sensitivity, and early detection of foodborne pathogen contamination in food.

RESULTS

We have developed a broad-spectrum microbial detection biosensor platform MDC@N-MMCNs that combines antimicrobial peptides as identifying ingredients with mesoporous carbon with peroxidase-like activity to detect and eliminate foodborne pathogens rapidly. In this study, nitrogen-doped magnetic mesoporous carbon nanospheres (N-MMCNs) were prepared using ferric nitrate as the magnetic source. Musca domestica cecropin (MDC) has abundant recognition sites on the surface of bacteria, which helps to recognize and amplify the signal, and combines with N-MMCNs to form MDC@N-MMCNs. MDC@N-MMCNs have high stability, specificity, and sensitivity, with a visual detection limit as low as 102 CFU/mL. The MDC@N-MMCNs paper-based sensor enables selective and rapid detection of four foodborne pathogens via a smartphone application.

SIGNIFICANCE

Based on these findings, we believe that MDC@N-MMCNs hold great potential for on-site bacterial infection diagnosis in resource-limited environments or point-of-care (POCT) settings, offering a simple, cost-effective solution for food safety and public health.

Advances in the study of the biological activity of polysaccharide-based carbon dots: A review

Carbon dots have attracted worldwide interest due to their customizable nature, luminescent properties, and exceptional biocompatibility. In particular, biomass-derived carbon dots have attracted attention for their environmentally friendly and cost-effective synthesis. Recent research looks into how polysaccharides can be used to make carbon dots. Using them as starting materials for nanomaterials has benefits in terms of structure, morphology, and doping elements. Although research has extensively examined the optical properties of carbon dots, their potential biological applications have not been thoroughly investigated. This review mainly summarises the cytotoxicity and biological functions of polysaccharide-based carbon dots (e.g. agar, alginate, cellulose, carrageenan, chitosan, chitosan, starch, gelatin, etc.), such as antioxidant, antibacterial and anti-tumor functions, highlighting the different scenarios of the methods of preparation of carbon dots. The applications of carbon dots in food, biomedical sciences, soil fertilization, and power generation are highlighted by reviewing the low toxicity of carbon dots with safety and biocompatibility in human contact. Finally, the importance and challenges of polysaccharide-based carbon dots and the prospects and research directions of polysaccharide-based carbon dots are explained by comparing them with other nanomaterials.

Biocompatible polymer-coated magneto-fluorescent super nanoparticles for the homing of mesenchymal stem cells

Stem cell plays an important role in the clinical field. However, the effective delivery of stem cells to the targeted site relies on the efficient homing of the cells to the site of injury. In view of that, fluorescent magnetic nanoparticles stick out due to their wide range of enabling functions including cellular homing and tracking. The present study unravels the synthesis of polymer-coated biocompatible and fluorescent magnetic nanoparticles (FMNPs) by a single-step hydrothermal synthesis method. Importantly, the facile method developed the biological super nanoparticles consisting of the magnetic core, which is surrounded by the fluorescent nanodot-decorated polymeric shell. The synthesized particles showed an amorphous nature, and superparamagnetic properties, with efficient fluorescence properties of emission at the blue range (̴ 410 nm). The FMNP labeling showed the mesenchymal stem cell (MSC) homing to the desired site in the presence of an external magnetic field. The in-house synthesized nanoparticles showed significant cytocompatibility and hemocompatibility in vitro as well as in vivo conditions owing to their surface coating. This unprecedented work advances the efficient internalization of FMNPs in MSCs and their enhanced migration potential provides a breakthrough in stem cell delivery for therapeutic applications. STATEMENT OF SIGNIFICANCE: The bi-modal fluorescent magnetic nanoparticles hold a promising role in the biomedical field for mesenchymal stem cell homing and tracking. Hence, in this study, for the first time, we have synthesized the fluorescent magnetic nanoparticle with polymer coating via an easy single-step method. The nanoparticle with a polymer coat enhanced the biocompatibility and effortless internalization of the nanoparticle into mesenchymal stem cells without hampering the native stem cell properties. Furthermore, the enhanced migration potential of such magnetized stem cells and their homing at the target site by applying an external magnetic field opened up avenues for the smart delivery of mesenchymal stem cells at complex sites such as retina for the tissue regeneration.

Iron Oxide-Doped Carbon Nanoparticles Stabilised with Functionally Modified Hyperbranched Polyglycerol for Cd2+ Sensing and Photodynamic Antibacterial Therapeutic Applications

Nanoscale materials are being developed from individual particles to multi-component assemblies, with carbon nanomaterials being particularly useful in bioimaging, sensing, and optoelectronics due to their unique optical properties, enhanced by surface passivation and chemical doping. Noble metals are commonly used in conjunction with carbon-based nanomaterials for the synthesis of nanohybrids. Carbon-based materials can function as photosensitizers and effective carriers in photodynamic therapy, enabling the use of combined treatment approaches. The hydrophobicity and agglomeration tendency of carbon nanoparticles pose a drawback. This study is an attempt to overcome these limitations, which involved the synthesis of iron oxide-doped carbon nanoparticles through the carbonisation of citric acid and hexamethylene tetramine, followed by doping them with iron oxide. The as synthesized iron oxide-doped carbon nanoparticles were stabilised with fluorescently modified hyperbranched polyglycerol. The efficacy of these nanoparticles in photodynamic antibacterial therapy and Cd (II) ion sensing was investigated. The selectivity of stabilised nanoparticles against Cd2+ ion is presented in the current study. The current study also compares the antibacterial efficacy of undoped, iron oxide-doped and stabilised nanoparticle systems. The possible toxic effects of the synthesised nanosystems were investigated in order to assess their suitability for biomedical applications and establish their safety profile.

Recent Advances in Optical Sensing for the Detection of Microbial Contaminants

Microbial contaminants are responsible for several infectious diseases, and they have been introduced as important potential food- and water-borne risk factors. They become a global burden due to their health and safety threats. In addition, their tendency to undergo mutations that result in antimicrobial resistance makes them difficult to treat. In this respect, rapid and reliable detection of microbial contaminants carries great significance, and this research area is explored as a rich subject within a dynamic state. Optical sensing serving as analytical devices enables simple usage, low-cost, rapid, and sensitive detection with the advantage of their miniaturization. From the point of view of microbial contaminants, on-site detection plays a crucial role, and portable, easy-applicable, and effective point-of-care (POC) devices offer high specificity and sensitivity. They serve as advanced on-site detection tools and are pioneers in next-generation sensing platforms. In this review, recent trends and advances in optical sensing to detect microbial contaminants were mainly discussed. The most innovative and popular optical sensing approaches were highlighted, and different optical sensing methodologies were explained by emphasizing their advantages and limitations. Consequently, the challenges and future perspectives were considered.

Recent advances and perspectives of functionalized carbon dots in bacteria sensing

Bacterial infectious diseases are severe threats to human health and increase substantial financial burdens. Nanomaterials have shown great potential in timely and accurate bacterial identification, detection, and monitoring to improve the cure rate and reduce mortality. Recently, carbon dots have been evidenced to be ideal candidates for bacterial identification and detection due to their superior physicochemical properties and biocompatibility. This review outlines the detailed recognition elements and recognition strategies with functionalized carbon dots (FCDs) for bacterial identification and detection. The advantages and limitations of different kinds of FCDs-based sensors will be critically discussed. Meanwhile, the ongoing challenges and perspectives of FCDs-based sensors for bacteria sensing are put forward.

Photoluminescent inorganic nanoprobe-based pathogen detection

Pathogens are serious threats to human health, and traditional detection techniques suffer from various limitations. The unique optical properties of photoluminescent inorganic nanomaterials, such as high photoluminescence quantum yields, good photostability, and tunable spectrum, make them ideal tools for the detection of pathogens with high specificity and sensitivity. In this review, the design strategies, working mechanisms, and applications of photoluminescent inorganic nanomaterial-based probes in pathogen detection are introduced. In particular, the design and construction of stimuli-responsive nanoprobes and their potential in these fields are highlighted.

Carbon Dots: An Excellent Fluorescent Probe for Contaminant Sensing and Remediation

Pollution-induced degradation of the environment is a serious problem for both developing and developed countries. Existing remediation methods are restricted, necessitating the development of novel remediation technologies. Nanomaterials with unique characteristics have recently been developed for remediation. Quantum dots (QDs) are semiconductor nanoparticles (1-10 nm) with optical and electrical characteristics that differ from bigger particles owing to quantum mechanics, making them intriguing for sensing and remediation applications. Carbon dots (CDs) offer better characteristics than typical QDs, such as, CdSe QDs in terms of contaminant sensing and remediation. Non-toxicity, chemical inertness, photo-induced electron transfer, good biocompatibility, and adjustable photoluminescence behavior are all characteristics of CDs. CDs are frequently made from sustainable raw materials as they are cost-effective, environmentally compactable, and excellent in reducing waste generation. The goal of this review article is to briefly describe CDs fabrication methods, to deeply investigate the criteria and properties of CDs that make them suitable for sensing and remediation of contaminants, and also to highlight recent advances in their use in sensing and remediation of contaminants.

Tailor made magnetic nanolights: fabrication to cancer theranostics applications

Nanoparticles having magnetic and fluorescent properties could be considered as a gift to materials scientists due to their unique magneto-optical qualities. Multiple component particles can overcome challenges related with a single component and unveil bifunctional/multifunctional features that can enlarge their applications in diagnostic imaging agents and therapeutic delivery vehicles. Bifunctional nanoparticles that have both luminescent and magnetic features are termed as magnetic nanolights. Herein, we present recent progress of magneto-fluorescent nanoparticles (quantum dots based magnetic nanoparticles, Janus particles, and heterocrystalline fluorescent magnetic materials), comprehensively describing fabrication strategies, types, and biomedical applications. In this review, our aim is not only to encompass the preparation strategies of these special types of magneto-fluorescent nanomaterials but also their extensive applications in bioimaging techniques, cancer therapy (targeted and hyperthermic), and sustained release of active agents (drugs, proteins, antibodies, hormones, enzymes, growth factors).

A Review on Promising Membrane Technology Approaches for Heavy Metal Removal from Water and Wastewater to Solve Water Crisis

Due to the impacts of water scarcity, the world is looking at all possible solutions for decreasing the over-exploitation of finite freshwater resources. Wastewater is one of the most reliable and accessible water supplies. As the population expands, so do industrial, agricultural, and household operations in order to meet man’s enormous demands. These operations generate huge amounts of wastewater, which may be recovered and used for a variety of reasons. Conventional wastewater treatment techniques have had some success in treating effluents for discharge throughout the years. However, advances in wastewater treatment techniques are required to make treated wastewater suitable for industrial, agricultural, and household use. Diverse techniques for removing heavy metal ions from various water and wastewater sources have been described. These treatments can be categorized as adsorption, membrane, chemical, or electric. Membrane technology has been developed as a popular alternative for recovering and reusing water from various water and wastewater sources. This study integrates useful membrane technology techniques for water and wastewater treatment containing heavy metals, with the objective of establishing a low-cost, high-efficiency method as well as ideal production conditions: low-cost, high-efficiency selective membranes, and maximum flexibility and selectivity. Future studies should concentrate on eco-friendly, cost-effective, and long-term materials and procedures.

Recent advances in functionalized nanomaterials for the diagnosis and treatment of bacterial infections

The growing problem of resistant infections due to antibiotic misuse is a worldwide concern that poses a grave threat to healthcare systems. Thus, it is necessary to discover new strategies to combat infectious diseases. In this review, we provide a selective overview of recent advances in the use of nanocomposites as alternatives to antibiotics in antimicrobial treatments. Metals and metal oxide nanoparticles (NPs) have been associated with inorganic and organic supports to improve their antibacterial activity and stability as well as other properties. For successful antibiotic treatment, it is critical to achieve a high drug concentration at the infection site. In recent years, the development of stimuli-responsive systems has allowed the vectorization of antibiotics to the site of infection. These nanomaterials can be triggered by various mechanisms (such as changes in pH, light, magnetic fields, and the presence of bacterial enzymes); additionally, they can improve antibacterial efficacy and reduce side effects and microbial resistance. To this end, various types of modified polymers, lipids, and inorganic components (such as metals, silica, and graphene) have been developed. Applications of these nanocomposites in diverse fields ranging from food packaging, environment, and biomedical antimicrobial treatments to diagnosis and theranosis are discussed.

Fabrication of biocompatible magneto-fluorescence nanoparticles as a platform for fluorescent sensor and magnetic hyperthermia applications

Multifunctional nanoparticles with special magnetic and optical properties have been attracting a great deal of attention due to their important applications in the bioanalytical and biomedical fields. In this study, we report the fabrication of biocompatible magneto-fluorescence nanoparticles consisting of carbon dots (CDots) and silica-coated cobalt–manganese nanoferrites (Co_0.5Mn_0.5Fe₂O₄) (CoMnF@Si@CDots) (MagSiCDots) by a facile hydrothermal method. The as-prepared MagSiCDots have a particle size of 100–120 nm and show a negative zeta potential of −35.50 mV at a neutral pH. The fluorescence spectrum of the MagSiCDots nanoparticles consists of sharp excitation at 365 nm and broad blue light emission with a maximum wavelength of 442.5 nm and the MagSiCDots exhibit superparamagnetic behaviour with a saturation magnetization of 11.6 emu g⁻¹. The potential of MagSiCDots as a fluorescent sensor and be used for magnetic hyperthermia applications. It is seen that the fluorescent intensity of a colloidal solution (a hydrogen sulfide (H₂S) solution containing MagSiCDots nanoparticles) has a linear relationship with the H₂S concentration range of 0.2–2 μM. The limit of detection (LOD) of H₂S by our MagSiCDots particles is 0.26 μM and they remain stable for at least 90 min. To test the suitability of the MagSiCDots nanoparticles for use in hyperthermia application, induction heating using an AMF was done. It was observed that these nanoparticles had a specific absorption rate (SAR) of 28.25 W g⁻¹. The in vitro and in vivo cytotoxicity of MagSiCDots were tested on HeLa cells lines. The results show a cell viability of about 85% when exposed to 100 μg mL⁻¹ concentration of the particles. The in vivo cytotoxicity using zebrafish assay also confirmed the non-toxicity and biocompatibility of the nanoparticles to living cells. The reported data demonstrate that by combining CoMnF@Si and fluorescent CDots into a single system, not only nontoxic multifunctional nanomaterials but also multimodal nanoparticles for several applications, such as hazard gas detection and acting as a biocompatible heat source for therapeutic treatment of cancer, are provided.

Multifunctional nanoparticles with special magnetic and optical properties have been attracting a great deal of attention due to their important applications in the bioanalytical and biomedical fields.

Rapid and highly sensitive detection of Salmonella typhimurium in lettuce by using magnetic fluorescent nanoparticles

The highly efficient detection of Salmonella typhimurium (S. typhimurium), a common foodborne bacterial, is important for the safety assurance of leafy vegetables. In this study, a fluorescent sensor (FMNCs-Apt), based on Fe3O4 magnetic nanoparticles and aptamer-modified carbon quantum dots, was developed for the rapid and highly sensitive detection of S. typhimurium in lettuce. First, carbon quantum dots were covalently bonded to the surface of prepared Fe3O4@chitosan to form magnetic fluorescence composite nanoparticles (FMNCs). Then, the aptamers of S. typhimurium were covalently linked to the surface (and named FMNCs-Apt). Fluorescence intensity of the FMNCs-Apt probes decreased as they aggregated on the surface of the bacteria, and the aggregation was separated using a magnet. Under the optimal conditions, the fluorescence change values of the solution showed a good linear relationship with the concentration of Salmonella (103-106 CFU mL-1). The detection limit of the method is 100 CFU mL-1 and 138 CFU mL-1 in fresh-cut vegetable washing solution and lettuce sample, respectively. Accordingly, this developed fluorescent probe became a highly sensitive and efficient sensor for the rapid detection of S. typhimurium in lettuce.

Conjugation of Carboxylated Graphene Quantum Dots with Cecropin P1 for Bacterial Biosensing Applications

Biosensors that can accurately and rapidly detect bacterial concentrations in solution are important for potential applications such as assessing drinking water safety. Meanwhile, quantum dots have proven to be strong candidates for biosensing applications in recent years because of their strong light emission properties and their ability to be modified with a variety of functional groups for the detection of different analytes. Here, we investigate the use of conjugated carboxylated graphene quantum dots (CGQDs) for the detection of Escherichia coli using a biosensing assay that focuses on measuring changes in fluorescence intensity. We have further developed this assay into a novel, compact, field-deployable biosensor focused on rapidly measuring changes in absorbance to determine E. coli concentrations. Our CGQDs were conjugated with cecropin P1, a naturally produced antibacterial peptide that facilitates the attachment of CGQDs to E. coli cells; to our knowledge, this is the first instance of cecropin P1 being used as a biorecognition element for quantum dot biosensors. As such, we confirm the structural modification of these conjugated CGQDs in addition to analyzing their optical characteristics. Our findings have the potential to be used in situations where rapid, reliable detection of bacteria in liquids, such as drinking water, is required, especially given the low range of E. coli concentrations (103 to 106 CFU/mL) within which our two biosensing assays have collectively been shown to function.

Functional BOD-Ad-Cmyc@BSA complex nanosensor for Cu(II) and the detection of live E. coli

Escherichia coli (E. coli) is abundantly present in nature. It is generally harmless to humans but some strains have been deemed very dangerous. Therefore, as an indicator of hygienic testing, the detection of E. coli is essential. In this work, a fluorescent assembly was synthesized and characterized by spectroscopic methods. It was found that the amantadine (Ad) conjugated dye (BOD-Ad) intercalated into Cmyc G4 (aptamer) forming a non-emission assembly (BOD-Ad-Cmyc), which could be lighted-up by BSA due to the formation of fluorescence nanoparticle BOD-Ad-Cmyc@BSA. Further, BOD-Ad-Cmyc@BSA can selectively bind Cu²⁺ forming non-emission species BOD-Ad-Cmyc@BSA-Cu²⁺. E. coli can turn-on the emission of BOD-Ad-Cmyc@BSA-Cu²⁺ system due to the copper accumulation or reduction by E. coli. Therefore, a fluorescence method for the determination of E. coli was built. The detection limit of BOD-Ad-Cmyc@BSA-Cu²⁺ of E. coli is 6.3 CFU/mL. Thus, this BOD-Ad-Cmyc@BSA-Cu²⁺ fluorescent assembly can be used for the detection of live E. coli in the environment.

Bifunctional Carbon Dots-Magnetic and Fluorescent Hybrid Nanoparticles for Diagnostic Applications

There is a huge demand for materials capable of simple detection or separation after conjugation with specific biologic substances when applied as a diagnostic tools. Taking into account the photoluminescence properties of C-dots and the highly magnetic properties of Fe(0), a new hybrid composite of these components was synthesized via ultrasound irradiation. The material was fully characterized by various physicochemical techniques. The main goal of the current study was to obtain a highly magnetic and intense fluorescent hybrid material. The goal was achieved. In addition, magnetic particles tended to agglomerate. The new hybrid can be suspended in ethanol, which is an additional feature of the current research. The dispersion of the hybrid nanoparticles in ethanol was achieved by utilizing the interaction of iron particles with C-dots which were decorated with functional groups on their surface. The newly formed hybrid material has potential applications in diagnostic by conjugating with specific antibodies or with any other biologic compounds. Such application may be useful in detection of various diseases such as: cancer, tuberculosis, etc.

Carbon dots: Current advances in pathogenic bacteria monitoring and prospect applications

Pathogenic bacterial infections are a significant threat to human safety and health. Recent researches on the application of nanoparticles as imaging, detecting agents have evidenced their huge potential for infectious disease management. Among these nanoparticles, carbon dots (CDs) have attracted much attention as a new and innovative nanoparticle owing to their unique optical and physicochemical properties as well as their higher biosafety. Thus, CDs are becoming superior candidates for imaging and detection of pathogenic bacteria. This review provides an overview of research advances and the mechanisms in the imaging and detection pathogenic bacteria such as "switch on" sensor, "on-off" sensor, förster resonance energy transfer (FRET), etc. Further, our discussion extends to exploring the antibacterial effects of CDs, which is considered to be a potentially promising antibacterial agent. This review would provide the basis and the direction for the further commercial applications of CDs in imaging, detecting and eliminating pathogenic bacteria. The challenges associated with CDs in monitoring of pathogenic bacteria and future directions in this field are also presented.

Carbon Dots for Bacterial Detection and Antibacterial Applications-A Minireview

:

The prevention and treatment of various infections caused by microbes through antibiotics are becoming less effective due to antimicrobial resistance. Researches are focused on antimicrobial nanomaterials to inhibit bacterial growth and destroy the cells, to replace conventional antibiotics. Recently, carbon dots (C-Dots) become attractive candidates for a wide range of applications, including the detection and treatment of pathogens. In addition to low toxicity, ease of synthesis and functionalization, and high biocompatibility, C-Dots show excellent optical properties such as multi-emission, high brightness, and photostability. C-Dots have shown great potential in various fields, such as biosensing, nanomedicine, photo-catalysis, and bioimaging. This review focuses on the origin and synthesis of various C-Dots with special emphasis on bacterial detection, the antibacterial effect of CDots, and their mechanism.

Fluorimetric Detection of Single Pathogenic Bacterium in Milk and Sewage Water Using pH-Sensitive Fluorescent Carbon Dots and MALDI-TOF MS

The current study is focused on the application of water-soluble, fluorescent, and pH-sensitive carbon dots (CDs) as a nanoprobe for sensitive detection of pathogenic bacteria in milk and sewage water. The CDs were facilely synthesized through the controlled carbonization of sucrose using sulfuric acid and characterized through XRD, FTIR, TEM, UV-Vis Spectroscopy, and fluorescent analysis. The as-synthesized CDs were highly water-soluble, stable, and pH-sensitive fluorescent nanomaterials. The pH-related fluorescence study showed that the ratio of fluorescence intensity (Log[IF410/IF350]) changed linearly in the pH range between 4.9 and 6.9 in the Britton-Robison buffer. By determining the pH variation of the growth medium caused by the released acidic metabolites, the CDs-based ratiometric nanoprobe and MALDI-TOF mass spectrometry (MS) were used for the detection and identification of Escherichia coli O157:H7, respectively. The practical applicability of the pH-sensitive fluorescent CDs-based ratiometric nanoprobe was evaluated to detect Escherichia coli O157:H7 in real samples, i.e., milk and sewage water using agar count plate method with a limit of detection (LOD) up to 1 colony-forming unit per mL (CFU/mL).

Microwave-Assisted Synthesis of Amikacin Modified N,S co-Doped Carbon Dots for Escherichia coli Detection

Fluorescent amikacin modified nitrogen, sulfur co-doped carbon dots (amikacin modified N,S-CDs) were synthesized by a facile and low-cost one-step microwave-assisted specifically for selective detection of Gram-negative bacteria Escherichia coli (E. coli). Amikacin is a semi-synthetic amino glycoside antibiotic and it was employed in this study to increase the fluorescence response of N,S-CDs by providing binding ligand towards E. coli. The effect of thiourea content as the source of nitrogen and sulfur dopants was investigated prior to the preparation of amikacin modified N,S-CDs. The formation of amikacin modified N,S-CDs were characterized by using Fourier transform infrared (FTIR), X-ray diffraction (XRD), Transmission electron microscope (TEM), UV-Vis spectrophotometer, and spectrofluorometer. Amikacin modified N,S-CDs was identified to be successfully synthesized from the wavenumber shift of the C=O stretching mode. Amikacin modified N,S-CDs were amorphous with an average size of 7 nm. Fluorescence spectra showed that the highest intensity was obtained at thiourea content of 50% and amikacin mass of 25 mg. By comparing fluorescence responses of all the investigated amikacin modified N,S-CDs, the limit of detection (LOD) was attained by 25 mg amikacin modified N,S-CDs at 1.526 cfu mL−1.

Optical-Based (Bio) Sensing Systems Using Magnetic Nanoparticles

In recent years, various reports related to sensing application research have suggested that combining the synergistic impacts of optical, electrical or magnetic properties in a single technique can lead to a new multitasking platform. Owing to their unique features of the magnetic moment, biocompatibility, ease of surface modification, chemical stability, high surface area, high mass transference, magnetic nanoparticles have found a wide range of applications in various fields, especially in sensing systems. The present review is comprehensive information about magnetic nanoparticles utilized in the optical sensing platform, broadly categorized into four types: surface plasmon resonance (SPR), surface-enhanced Raman spectroscopy (SERS), fluorescence spectroscopy and near-infrared spectroscopy and imaging (NIRS) that are commonly used in various (bio) analytical applications. The review also includes some conclusions on the state of the art in this field and future aspects.

Carbon Dots for Sensing and Killing Microorganisms

Carbon dots (or carbon quantum dots) are small (less than 10 nm) and luminescent carbon nanoparticles with some form of surface passivation. As an emerging class of nanomaterials, carbon dots have found wide applications in medicine, bioimaging, sensing, electronic devices, and catalysis. In this review, we focus on the recent advancements of carbon dots for sensing and killing microorganisms, including bacteria, fungi, and viruses. Synthesis, functionalization, and a toxicity profile of these carbon dots are presented. We also discuss the underlying mechanisms of carbon dot-based sensing and killing of microorganisms.

Visual detection of cyclobutane pyrimidine dimer DNA damage lesions by Hg2+ and carbon dots

Cyclobutane pyrimidine dimmers (CPDs) and 6-4-[pyrimidine-2'-one] pyrimidine (6-4 PP) are major UV induced DNA damage lesions formed from solar radiation and other sources. CPD lesions are presumably mutagenic and carcinogenic that inhibit polymerases and interfere in DNA replication. An easy and cost effective way for visual detection of these lesions by using fluorescence based method is shown here. Artificial UVA and UVB lights were used for the generation of CPD and 6-4 PPs in selected DNA samples. Binding of Hg²⁺ ions with DNA before and after induction of CPD and 6-4 PP lesions was evaluated in the presence of highly fluorescent blue emitting carbon dots (CDs). Induction of CPD and 6-4 PPs in DNA causes distortion of DNA structure which hinders the binding of Hg²⁺ ions to DNA nucleobases. Quenching of fluorescence intensity of CDs by unbound Hg²⁺ ions was found to be proportional to the amount of CPD and 6-4 PP lesions induced by UV irradiation of DNA samples that offer a biosensing platform for the sensitive detection of CPD lesions in DNA. The fluorescent quenching was visually detectable using hand held UV light without the intervention of any equipment.

Carbon Nanomaterials in Biological Studies and Biomedicine

The "carbon nano-world" has made over the past few decades huge contributions in diverse scientific disciplines and technological advances. While dramatic advances have been widely publicized in using carbon nanomaterials such as fullerenes, carbon nanotubes, and graphene in materials sciences, nano-electronics, and photonics, their contributions to biology and biomedicine have been noteworthy as well. This Review focuses on the use of carbon nanotubes (CNTs), graphene, and carbon quantum dots [encompassing graphene quantum dots (GQDs) and carbon dots (C-dots)] in biologically oriented materials and applications. Examples of these remarkable nanomaterials in bio-sensing, cell- and tissue-imaging, regenerative medicine, and other applications are presented and discussed, emphasizing the significance of their unique properties and their future potential.