New CNT/poly(brilliant green) and CNT/poly(3,4-ethylenedioxythiophene) based electrochemical enzyme biosensors

A biocatalytic cascade in enzyme/metal continuous-microflow microgel with stable intermediate channel for point-of-care biosensing

A fast and accurate method for ultrasensitive monitoring of substrate is significant for cascade molecular detection. Here, we synthesize a glucose oxidase (GOx) microgel with iron coordination (Fe/GOx microgel). The microgel is cross-linked by chitosan and iron ion coordination which construct a tubular structure. Powder X-ray diffraction and Brunauer-Emmett-Teller results confirm the tubular crystal structure with a high specific surface area is formed in the microgel. The tubular structure offers a stable channel for intermediate transport which ensures the stabilization for the intermediate transport, and high specific surface area enhances the interaction between substrates and catalysts. As a result, the sensitivity of the Fe/GOx microgel is 175.5 μA mM-1 cm-2 and the lowest detection limit is 4.42 μM. In addition, the nanoscale Fe/GOx microgel also has the characteristics of reusability and maintains its activity after five times of catalysis. The generation of free radicals during the catalytic process can be detected by light detection and electrochemical signal detection within different detection limits. Therefore, Fe/GOx microgel provides a new platform and catalyst for the precise detection of cascade catalysis.

Sybodies as Novel Bioreceptors toward Field-Effect Transistor-Based Detection of SARS-CoV-2 Antigens

The SARS-CoV-2 pandemic has increased the demand for low-cost, portable, and rapid biosensors, driving huge research efforts toward new nanomaterial-based approaches with high sensitivity. Many of them employ antibodies as bioreceptors, which have a costly development process that requires animal facilities. Recently, sybodies emerged as a new alternative class of synthetic binders and receptors with high antigen binding efficiency, improved chemical stability, and lower production costs via animal-free methods. Their smaller size is an important asset to consider in combination with ultrasensitive field-effect transistors (FETs) as transducers, which respond more intensely when biorecognition occurs near their surface. This work demonstrates the immobilization of sybodies against the spike protein of the virus on silicon surfaces, which are often integral parts of the semiconducting channel of FETs. Immobilized sybodies maintain the capability to capture antigens, even at low concentrations in the femtomolar range, as observed by fluorescence microscopy. Finally, the first proof of concept of sybody-modified FET sensing is provided using a nanoscopic silicon net as the sensitive area where the sybodies are immobilized. The future development of further sybodies against other biomarkers and their generalization in biosensors could be critical to decrease the cost of biodetection platforms in future pandemics.

Polyphenazine and polytriphenylmethane redox polymer/nanomaterial-based electrochemical sensors and biosensors: a review

In recent years, an increasing number of studies has demonstrated that redox polymers can be used in simple and effective electrochemical sensing platforms due to their fast electron transfer and electrocatalytic ability. To develop more sensitive and selective electrochemical (bio)sensors, the electrocatalytic properties of redox polymers and the electrical, mechanical, and catalytic properties of various nanomaterials are combined. This review aims to summarize and contribute to the development of (bio)sensors based on polyphenazine or polytriphenylmethane redox polymers combined with nanomaterials, including carbon-based nanomaterials, metal/metal oxide, and semiconductor nanoparticles. The synthesis, preparation, and modification of these nanocomposites is presented and the contribution of each material to the performance of (bio)sensor has been be examined. It is explained how the combined use of these redox polymers and nanomaterials as a sensing platform leads to improved analytical performance of the (bio)sensors. Finally, the analytical performance characteristics and practical applications of polyphenazine and polytriphenylmethane redox polymer/nanomaterial-based electrochemical (bio)sensors are compared and discussed.

Biomedical Application of Electroactive Polymers in Electrochemical Sensors: A Review

Conducting polymers are of interest due to their unique behavior on exposure to electric fields, which has led to their use in flexible electronics, sensors, and biomaterials. The unique electroactive properties of conducting polymers allow them to be used to prepare biosensors that enable real time, point of care (POC) testing. Potential advantages of these devices include their low cost and low detection limit, ultimately resulting in increased access to treatment. This article presents a review of the characteristics of conducting polymer-based biosensors and the recent advances in their application in the recognition of disease biomarkers.

Simultaneous determination of alcohols including diols and triols by HPLC with ultraviolet detection based on the formation of a copper(II) complex

We developed a reversed-phase high-performance liquid chromatography method with ultraviolet detection using on-line complexation with Cu(II) ion for analysis of five alcohols including diols and triol (methanol, ethanol, 1,2-propanediol, 1,3-propanediol, and glycerol). The Cu(II) ion concentration in the mobile phase had a great influence on the peak areas of these alcohols, but not on their retention times. Column temperature (25-40°C) and pH of the mobile phase did not affect the separation of analytes. The optimum separation conditions were determined as 5 mM CuSO₄ , 3 mM H₂ SO₄ , and 3 mM NaOH at 30°C. The ratio of the peak areas for three alcohols (methanol, 1,2-propanediol, and glycerol) was in good agreement with that calculated from the obtained stability constants, molar absorption coefficients for the 1:1 Cu(II) complexes with the three alcohols, and the injected molar quantities. This fact strongly suggests that the observed high-performance liquid chromatography signals resulted from formation of the 1:1 Cu(II)-alcohol complexes. Using the proposed method, these five alcohols in spirit, liquid for electronic cigarette, mouthwash, and nail enamel remover samples were successfully analyzed with only a simple pretreatment.

Recent advances in bioactive 1D and 2D carbon nanomaterials for biomedical applications

One-dimensional (1D) carbon nanotubes (CNTs) and the two-dimensional (2D) graphene represent the most widely studied allotropes of carbon. Due to their unique structural, electrical, mechanical and optical properties, 1D and 2D carbon nanostructures are considered to be leading candidates for numerous applications in biomedical fields, including tissue engineering, drug delivery, bioimaging and biosensors. The biocompatibility and toxicity issues associated with these nanostructures have been a critical impediment for their use in biomedical applications. In this review, we present an overview of the various materials types, properties, functionalization strategies and characterization methods of 1D and 2D carbon nanomaterials and their derivatives in terms of their biomedical applications. In addition, we discuss various factors and mechanisms affecting their toxicity and biocompatibility.

'Rough guide' evanescent wave optrode for colorimetric metalloporphyrine sensors

When films of zinc 5-(4-carboxyphenyl),10,15,20-triphenyl porphyrin (ZnTPP) are exposed to waterborne amine in pH- neutral or alkaline media, both Q- band and Soret band respond with a change of absorbance due to the donation of amine 'lone pair' electrons to the metalloprophyrin π orbital. However, this is difficult to reveal with a conventional spectrometer even under high amine concentration. We therefore introduce optical fibres coated with ZnTPP into a bespoke 'light balance' evanescent wave absorbance meter [doi:10.1016/j.snb.2016.05.065]. The light balance makes absorbance changes clearly visible under only 5μM aqueous amine, making PVC membranes redundant. We find sensitivity is higher, and limit- of- detection lower, in the Soret band rather than the Q- band, reflecting the stronger Soret band absorbance. Also, we find that sensitivity is higher, and limit- of- detection approximately two times lower, when rough rather than smooth fibres are used. We believe the rough fibre surface leads to enhanced evanescence, and therefore better overlap of the wave propagating in the fibre with the ZnTPP fibre cladding. We find a limit of detection to waterborne amines below 1μM, which compares well to other sensors for waterborne amines [Korent, S.M. et.al. Anal. Bioanal. Chem. 387 (2007) 2863-2870; Algarni, S. A. et.al. Talanta 153 (2016) 107-110]. We therefore recommend 'rough guide' evanescent wave optrodes, in combination with sensitive 'light balance' detector, to succeed membrane- embedding of colorimetric sensitisers such as metalloporphyrines.