A simple sheathless CE-MS interface with a sub-micrometer electrical contact fracture for sensitive analysis of peptide and protein samples

Protein analysis using capillary electrophoresis coupled to mass spectrometry through vibrating sharp-edge spray ionization

Capillary electrophoresis (CE) interfaced to mass spectrometry (MS) with electrospray ionization typically incorporates acidic additives or organic solvents to assist in ionization. Vibrating sharp-edge spray ionization (VSSI) is a voltage-free method to interface CE and MS that does not require these additives, making it appealing for protein analyses. CE-VSSI nanoflow sheath separations are performed with low ionic strength aqueous solutions in the sheath to reduce suppression. Serine is also included in the sheath to reduce analyte adduction. Proteins are detected in the 2.5-10 µM range, corresponding to an injected mass range of 0.1-1.2 ng. The anionic proteins β-lactoglobulin and transferrin are resolved using an unmodified fused silica capillary because they do not exhibit nonspecific surface adsorption. Conversely, separations of cationic proteins cytochrome c, ribonuclease A, and α-chymotrypsinogen A in an unmodified capillary require acidic background electrolytes to overcome adsorption. Alternatively, a semipermanent coating comprised self-assembled lipids overcomes surface adsorption at a neutral pH. Separations with zwitterionic and hybrid cationic coatings are complete within 15 or 6 min, respectively. The dimeric form of triosephosphate isomerase was observed at a 60 µM, corresponding to a mass of 19 ng, by dropping the temperature of the MS inlet.

Mass spectrometry-intensive top-down proteomics: an update on technology advancements and biomedical applications

Proteoforms are all forms of protein molecules from the same gene because of variations at the DNA, RNA, and protein levels, e.g., alternative splicing and post-translational modifications (PTMs). Delineation of proteins in a proteoform-specific manner is crucial for understanding their biological functions. Mass spectrometry (MS)-intensive top-down proteomics (TDP) is promising for comprehensively characterizing intact proteoforms in complex biological systems. It has achieved substantial progress in technological development, including sample preparation, proteoform separations, MS instrumentation, and bioinformatics tools. In a single TDP study, thousands of proteoforms can be identified and quantified from a cell lysate. It has also been applied to various biomedical research to better our understanding of protein function in regulating cellular processes and to discover novel proteoform biomarkers of diseases for early diagnosis and therapeutic development. This review covers the most recent technological development and biomedical applications of MS-intensive TDP.

Analytical Techniques for the Characterization and Quantification of Monoclonal Antibodies

Monoclonal antibodies (mAbs) are a fast-growing class of biopharmaceuticals. They are widely used in the identification and detection of cell makers, serum analytes, and pathogenic agents, and are remarkably used for the cure of autoimmune diseases, infectious diseases, or malignancies. The successful application of therapeutic mAbs is based on their ability to precisely interact with their appropriate target sites. The precision of mAbs rely on the isolation techniques delivering pure, consistent, stable, and safe lots that can be used for analytical, diagnostic, or therapeutic applications. During the creation of a biologic, the key quality features of a particular mAb, such as structure, post-translational modifications, and activities at the biomolecular and cellular levels, must be characterized and profiled in great detail. This implies the requirement of powerful state of the art analytical techniques for quality control and characterization of mAbs. Until now, various analytical techniques have been developed to characterize and quantify the mAbs according to the regulatory guidelines. The present review summarizes the major techniques used for the analyses of mAbs which include chromatographic, electrophoretic, spectroscopic, and electrochemical methods in addition to the modifications in these methods for improving the quality of mAbs. This compilation of major analytical techniques will help students and researchers to have an overview of the methodologies employed by the biopharmaceutical industry for structural characterization of mAbs for eventual release of therapeutics in the drug market.

CE-MS for Proteomics and Intact Protein Analysis

This chapter aims to explore various parameters involved in achieving high-end capillary electrophoresis hyphenated to mass spectrometry (CE-MS) analysis of proteins, peptides, and their posttranslational modifications. The structure of the topics discussed in this book chapter is conveniently mapped on the scheme of the CE-MS system itself, starting from sample preconcentration and injection techniques and finishing with mass analyzer considerations. After going through the technical considerations, a variety of relevant applications for this analytical approach are presented, including posttranslational modifications analysis, clinical biomarker discovery, and its growing use in the biotechnological industry.

Separation, identification and quantification of associated impurities in cobratide using sheathless CE-MS and CE-UV

Cobratide is a peptide drug extracted from the venom of Chinese cobra, and has been widely used in the clinical treatment of chronic, intractable and persistent pain. In a recent study, it was reported that it has the potential to treat COVID-19. In order to control the quality of commercial cobratide drugs, a protocol was established for the separation, identification and quantification of cobratide and its associated impurities, in which sheathless capillary electrophoresis-mass spectrometry (CE-MS) was used for identification and a rapid capillary electrophoresis-ultraviolet-visible detector (CE-UV) method was developed for accurate quantification. Separation conditions that affect the resolution and MS intensities of cobratide and its associated impurities were investigated, including pH value, concentration of background electrolyte (BGE), ratio of organic additive and sample solution. The optimized CE conditions (BGE: 50 mM NH₄Ac, pH 4.0; sample solution: deionized water) were used for both sheathless CE-MS and CE-UV methods. Three associated impurities were separated and identified for the first time by sheathless CE-MS. Then, a rapid CE-UV method was validated and used for accurate quantification of cobratide and its associated impurities. The CE-UV method showed good linearity between concentration and corrected peak area of cobratide in the concentration range of 5.36-536.30 μg mL^-1. The limit of quantification of the CE-UV method was 4.16 μg mL^-1. The relative standard deviations of migration time were less than 1% for both intra-day and inter-day experiments, and those of corrected peak area were less than 5%. Finally, different cobratide drugs were analyzed to evaluate the batch-to-batch consistency. This established protocol combining sheathless CE-MS and CE-UV methods would provide useful information for both quality control and process analysis of peptide drugs.

Data storage using peptide sequences

Humankind is generating digital data at an exponential rate. These data are typically stored using electronic, magnetic or optical devices, which require large physical spaces and cannot last for a very long time. Here we report the use of peptide sequences for data storage, which can be durable and of high storage density. With the selection of suitable constitutive amino acids, designs of address codes and error-correction schemes to protect the order and integrity of the stored data, optimization of the analytical protocol and development of a software to effectively recover peptide sequences from the tandem mass spectra, we demonstrated the feasibility of this method by successfully storing and retrieving a text file and the music file Silent Night with 40 and 511 18-mer peptides respectively. This method for the first time links data storage with the peptide synthesis industry and proteomics techniques, and is expected to stimulate the development of relevant fields.

Analysis of Monoclonal Antibodies by Capillary Electrophoresis: Sample Preparation, Separation, and Detection

Therapeutic monoclonal antibodies (mAbs) are dominating the biopharmaceutical field due to the fact of their high specificity in the treatment of diverse diseases. Nevertheless, mAbs are very complex glycoproteins exhibiting several macro- and microheterogeneities that may affect their safety, quality, and efficacy. This complexity is very challenging for mAbs development, formulation, and quality control. To tackle the quality issue, a combination of multiple analytical approaches is necessary. In this perspective, capillary electrophoresis has gained considerable interest over the last decade due to the fact of its complementary features to chromatographic approaches. This review provides an overview of the strategies of mAbs and derivatives analysis by capillary electrophoresis hyphenated to ultraviolet, fluorescence, and mass spectrometry detection. The main sample preparation approaches used for mAb analytical characterization (i.e., intact, middle-up/down, and bottom-up) are detailed. The different electrophoretic modes used as well as integrated analysis approaches (sample preparation and separation) are critically discussed.

Development of a novel sheathless CE-ESI-MS interface via a CO2 laser ablated opening

A new and easy to construct sheathless capillary electrophoresis electro spray ionization mass spectrometry (CE-ESI-MS) interface was developed that offers several advantages compared to traditional liquid junction interfaces. The fabrication of the device only requires a CO₂ laser engraver that most groups working with microfluids have access to. It only takes a few seconds to create a CO₂ laser ablated opening in the bare-fused silica capillaries and the opening can be placed as close as a few mm from the spray tip. The capillary is punctured through a silicone tube such that the opening is directly placed inside this tube, which also serves as a liquid reservoir for the make-up liquid. Electrical contact required for both CE separation and ESI is established via the liquid in this reservoir which is in contact with the electrode of an external high voltage power supply. The developed CE-ESI-MS interface is capable of analysing both small molecules and biomolecules such as peptides in physisorbed PEG polymer brush coated capillaries. Proof-of-principle of the interface was demonstrated by analysing a tryptic digest of BSA. Further, a range of drugs of abuse were also investigated. The examined small molecules (pethidine, nortriptyline, methadone, haloperidol and loperamide) have a quantification limit (LOQ) of 150 ng/mL and a detection limit (LOD) of 40 ng/mL (except for loperamide: LOD = 80 ng/mL). Finally, we used our novel CE-MS interface for the analysis of the Aβ40 peptide. This is a member of the beta-Amyloid peptide family, involved in the development of Alzheimer's disease. A LOQ of 9 μg/mL was obtained for Aβ40, corresponding to 23 fmoles in a sample volume of 11 nL.

Analytical techniques for metabolomic studies: a review

Metabolomics is the comprehensive study of small-molecule metabolites. Obtaining a wide coverage of the metabolome is challenging because of the broad range of physicochemical properties of the small molecules. To study the compounds of interest spectroscopic (NMR), spectrometric (MS) and separation techniques (LC, GC, supercritical fluid chromatography, CE) are used. The choice for a given technique is influenced by the sample matrix, the concentration and properties of the metabolites, and the amount of sample. This review discusses the most commonly used analytical techniques for metabolomic studies, including their advantages, drawbacks and some applications.

Ultrasensitive determination of organotin compounds in plastic food packaging and edible oils by sheathless capillary electrophoresis-electrospray ionization-mass spectrometry

The determination of trace-amount organotins in plastic food packaging materials is of great significance in food safety. However, due to the complexity of organotins and sample treatment processes, it is still a challenging task. Here, we report a method for the sensitive and simultaneous determination of organotins in plastic food packaging materials and edible oils, by utilizing sheathless capillary electrophoresis-electrospray ionization-mass spectrometry. The method of sample pretreatment with ultrasonic extraction and solid phase extraction is used to eliminate interference. The results showed low limits of detection (LODs) of 2 pg mL^-1-50 pg mL^-1 and excellent inter/intra-day repeatability. Good average recoveries in the range of 80.27% to 108.52% were obtained at three spiked concentrations, with a relative standard deviation less than 8.71%. The successful simultaneous determination of the target analytes will pave the way for further assessment of contamination and migration behaviour of organotins from packaging materials to food, which is of great significance for evaluating and controlling food safety.

Recent trends of capillary electrophoresis-mass spectrometry in proteomics research

Progress in proteomics research has led to a demand for powerful analytical tools with high separation efficiency and sensitivity for confident identification and quantification of proteins, posttranslational modifications, and protein complexes expressed in cells and tissues. This demand has significantly increased interest in capillary electrophoresis-mass spectrometry (CE-MS) in the past few years. This review provides highlights of recent advances in CE-MS for proteomics research, including a short introduction to top-down mass spectrometry and native mass spectrometry (native MS), as well as a detailed overview of CE methods. Both the potential and limitations of these methods for the analysis of proteins and peptides in synthetic and biological samples and the challenges of CE methods are discussed, along with perspectives about the future direction of CE-MS. @ 2019 Wiley Periodicals, Inc. Mass Spec Rev 00:1-16, 2019.

Polypyrrole-Modified Nylon 6 Nanofibers as Adsorbent for the Extraction of Two β-Lactam Antibiotics in Water Followed by Determination with Capillary Electrophoresis

A solid phase membrane adsorbent—a nylon 6 nanofibers membrane coated by polypyrrole (PPy-PA6-NFsM)—was firstly synthesized and used for extraction of two β-lactam antibiotics (oxacillin and cloxacillin) in urban river water. Then the analytes were detected by capillary electrophoresis with a diode array detector (CE-DAD). The synthesized nanofibers membrane was characterized by scanning electron microscopy and a Fourier transform infrared spectrometer. The experimental conditions were optimized, including the amount used of PPy-PA6-NFsM, pH of the sample solutions, adsorption volume, and desorption conditions. Under the optimal extraction and separation conditions, the detection limits were found to be 2.0 ng/mL for both oxacillin and cloxacillin. The proposed method was applied to the determination of the two β-lactams in water samples of an urban river. The recoveries of these two β-lactams were found to be in the range 84.2–96.4%, demonstrating that PPy-PA6-NFsM has a high extraction capability for these two antibiotics. The relative standard deviations, ranging from 2.26% to 5.29% for intraday measurements and from 2.38% to 7.02% for inter-day determinations, were derived respectively.

Recent advances in capillary electrophoresis-mass spectrometry: Instrumentation, methodology and applications

Capillary electrophoresis (CE) offers fast and high-resolution separation of charged analytes from small injection volumes. Coupled to mass spectrometry (MS), it represents a powerful analytical technique providing (exact) mass information and enables molecular characterization based on fragmentation. Although hyphenation of CE and MS is not straightforward, much emphasis has been placed on enabling efficient ionization and user-friendly coupling. Though several interfaces are now commercially available, research on more efficient and robust interfacing with nano-electrospray ionization (ESI), matrix-assisted laser desorption/ionization (MALDI) and inductively coupled plasma mass spectrometry (ICP) continues with considerable results. At the same time, CE-MS has been used in many fields, predominantly for the analysis of proteins, peptides and metabolites. This review belongs to a series of regularly published articles, summarizing 248 articles covering the time between June 2016 and May 2018. Latest developments on hyphenation of CE with MS as well as instrumental developments such as two-dimensional separation systems with MS detection are mentioned. Furthermore, applications of various CE-modes including capillary zone electrophoresis (CZE), nonaqueous capillary electrophoresis (NACE), capillary gel electrophoresis (CGE) and capillary isoelectric focusing (CIEF) coupled to MS in biological, pharmaceutical and environmental research are summarized.

Recent developments in capillary and microchip electroseparations of peptides (2015-mid 2017)

The review brings a comprehensive overview of recent developments and applications of high performance capillary and microchip electroseparation methods (zone electrophoresis, isotachophoresis, isoelectric focusing, affinity electrophoresis, electrokinetic chromatography, and electrochromatography) to analysis, microscale isolation, purification, and physicochemical and biochemical characterization of peptides in the years 2015, 2016, and ca. up to the middle of 2017. Advances in the investigation of electromigration properties of peptides and in the methodology of their analysis (sample preseparation, preconcentration and derivatization, adsorption suppression and EOF control, and detection) are described. New developments in particular CE and CEC methods are presented and several types of their applications to peptide analysis are reported: qualitative and quantitative analysis, determination in complex (bio)matrices, monitoring of chemical and enzymatical reactions and physical changes, amino acid, sequence and chiral analysis, and peptide mapping of proteins. Some micropreparative peptide separations are shown and capabilities of CE and CEC methods to provide important physicochemical characteristics of peptides are demonstrated.

Recent advances in protein analysis by capillary and microchip electrophoresis

This review article describes the significant recent advances in the analysis of proteins by capillary and microchip electrophoresis during the period from mid-2014 to early 2017. This review highlights the progressions, new methodologies, innovative instrumental modifications, and challenges for efficient protein analysis in human specimens, animal tissues, and plant samples. The protein analysis fields covered in this review include analysis of native, reduced, and denatured proteins in addition to Western blotting, protein therapeutics and proteomics.