Amphiphilic carbon dots for sensitive detection, intracellular imaging of Al3

Ratiometric near-infrared upconversion fluorescence sensor for selectively detecting and imaging of Al3

Near-infrared (NIR) fluorescent probes provide extremely sensitive Al³⁺ detection for human health purposes. This research develops novel Al³⁺ response molecules (HCMPA) and NIR upconversion fluorescent nanocarriers (UCNPs), which respond to Al³⁺ through ratio NIR fluorescence. UCNPs improve photobleaching and visible light lack in specific HCMPA probes. Additionally, UCNPs are capable of ratio response, which will further enhance signal accuracy. The NIR ratiometric fluorescence sensing system has been successfully used to detect Al³⁺ within the range 0.1-1000 nM with an accuracy limit of 0.06 nM. Alternatively, a NIR ratiometric fluorescence sensing system integrated with a specific molecule can image Al³⁺ within cells. This study demonstrates that a NIR fluorescent probe is an effective and highly stable method of measuring Al³⁺ in cells.

N-doped carbon nanomaterials as fluorescent pH and metal ion sensors for imaging

Herein we describe the facile synthesis of new N-doped carbon nanoparticles (CNPs) obtained from 1,10-phenanthroline by the solvothermal method. Characterization of CNPs were carried out with transmission electron microscope (TEM), X-ray photoelectron spectra (XPS), Fourier transform infrared spectra (FTIR), UV-vis absorption spectra, and luminescence spectra. CNPs were pH sensitive and exploited as fluorescent chemosensors and imaging agents for Al(III) and Zn(II) ions in real-life samples. Remarkably, we show that CNPs can be used for the detection of Al(III) and Zn(II) ions in water samples. Accordingly, the results indicate that CNPs are highly effective in detecting Zn(II) content of cosmetic creams. We also demonstrated that the CNPs could be used for in vitro imaging of Al(III) and Zn(II) in Human Larynx Squamous Cell Carcinoma (Hep-2). Finally, Al(III) imaging in Angelica Officinalis root tissue was also achieved successfully. The CNPs are promising as luminescent multianalyte (pH, Al(III) and Zn(II)) sensors.

Novel preparation of red fluorescent carbon dots for tetracycline sensing and its application in trace determination

The controllable design of red-emitting carbon dots and further exploration of their application in the trace determination of environmental pollutants remains a tremendous challenge. Herein, the novel strategy for red fluorescent carbon dots (R-CDs) with a higher quantum yield of 58.9% was proposed by doping small-molecule urea into the bio-dye of resazurin for the first time, which can retain the luminophore of precursors and exhibit exceptional optical, advantageous reversibility and outstanding photostability. Importantly, the R-CDs exhibit a remarkable fluorescence reduction towards tetracyclines (TCs) accompanied by a noticeable color change of R-CDs solution from red to yellow, which can realize the trace detection of TCs at strelatively low levels, including tetracycline (TC), oxytetracycline (OTC), and chlortetracycline (CTC). The linear range of TC, CTC, and OTC are 3-40 μM, 4-50 μM, and 2-50 μM, and the corresponding detection limits are 38.5 nM, 64.6 nM, and 45.4 nM, respectively (S/N = 3). Furthermore, the R-CDs demonstrate sensitivity to the physiological pH in the linear range of 4.0-5.0 and 5.0-6.2 with a pKa of 5.61. As a multifunctional fluorescent sensor, R-CDs can provide a new perspective for the preparation of long-wavelength CDs, and further realize the trace determination of environmental pollutants.

A simple, cost-effective colorimetric assay for aluminum ions via complexation with the flavonoid rutin

Aluminum has been linked to deleterious health effects with high concentration, chronic exposure, creating a need for innovative detection techniques. Colorimetric assays are an ideal approach since they are simple, cost-effective, and field adaptable. Yet, commercially available colorimetric assays for aluminum are limited since it forms few colored chelation complexes. Flavonoids, a class of polyphenolic compounds, are one of the few examples that create colored aluminum complexes. Aluminum ions (Al3+) are the main constituent in colorimetric assays for flavonoid detection in food or plant samples. Our assay design was based on colorimetric flavonoid assays, where the assay reported herein was optimized. Specifically, the flavonoid rutin concentration and sample-to-rutin volume ratio (295:5 µL) were optimized to detect Al3+ at low µM concentrations in samples. The assay performed comparably, and in some instances better, than those requiring advanced instrumentation and previously reported colorimetric assays, with a linear range (1–8 µM), sensitivity (7.6 nM), limit of detection (79.8 nM), and limit of quantification (266 nM) for Al3+. The colorimetric assay was accurate (99 ≤ 108 ± 4 ≤ 6% Al3+ recovery), precise (low intra- and inter-assay coefficient of variation (CV) of 3.1 ≤ 5.9% and 4.4%, respectively), and selective for Al3+ ions compared to solutions containing a variety of other mono-, di-, and tri-cations at much higher concentrations (10- to 100-fold higher). Lastly, the colorimetric assay was applicable to complex analysis. It was used to generate a chelation curve depicting the Al3+ chelation capacity of sodium alginate, a biologically derived polymer used as a bioink for 3D bioprinting.

Fluorescent Carbon Dot-Supported Imaging-Based Biomedicine: A Comprehensive Review

Carbon dots (CDs) provide distinctive advantages of strong fluorescence, good photostability, high water solubility, and outstanding biocompatibility, and thus are widely exploited as potential imaging agents for in vitro and in vivo bioimaging. Imaging is absolutely necessary when discovering the structure and function of cells, detecting biomarkers in diagnosis, tracking the progress of ongoing disease, treating various tumors, and monitoring therapeutic efficacy, making it an important approach in modern biomedicine. Numerous investigations of CDs have been intensively studied for utilization in bioimaging-supported medical sciences. However, there is still no article highlighting the potential importance of CD-based bioimaging to support various biomedical applications. Herein, we summarize the development of CDs as fluorescence (FL) nanoprobes with different FL colors for potential bioimaging-based applications in living cells, tissue, and organisms, including the bioimaging of various cell types and targets, bioimaging-supported sensing of metal ions and biomolecules, and FL imaging-guided tumor therapy. Current CD-based microscopic techniques and their advantages are also highlighted. This review discusses the significance of advanced CD-supported imaging-based in vitro and in vivo investigations, suggests the potential of CD-based imaging for biomedicine, and encourages the effective selection and development of superior probes and platforms for further biomedical applications.

Carbon dots: synthesis, properties and biomedical applications

Carbon dots (CDs) are a new type of carbon nanomaterial that have unique physical and chemical properties, good biocompatibility, low toxicity, and easy surface functionalization, making them widely used in biological imaging, environmental monitoring, chemical analysis, targeted drug delivery, disease diagnosis, therapy, etc. In this review, our content is mainly divided into four parts. In the first part, we focused on the preparation methods of CDs, including arc discharge, laser ablation, electrochemical oxidation, chemical oxidation, combustion, hydrothermal/solvent thermal, microwave, template, method etc. Next, we summarized methods of CD modification, including heteroatom doping and surface functionalization. Then, we discussed the optical properties of CDs (ultraviolet absorption, photoluminescence, up-conversion fluorescence, etc.). Lastly, we reviewed the common applications of CDs in biomedicine from the aspects of in vivo and in vitro imaging, sensors, drug delivery, cancer theranostics, etc. Furthermore, we also discussed the existing problems and the future development direction of CDs.

One-Pot Hydrothermal Synthesis of Carbon Dots as Fluorescent Probes for the Determination of Mercuric and Hypochlorite Ions

Nitrogen and sulfur codoped carbon dots (NSCDs) were synthesized via a one-pot hydrothermal method, and citric acid, ethylenediamine, and methyl blue were used as precursors. The obtained NSCDs were spherical with an average size of 1.86 nm. The fluorescence emission spectra of the NSCDs were excitation independent and emitted blue fluorescence at 440 nm with an excitation wavelength at 350 nm. The quantum yield of the NSCDs was calculated to be 68.0%. The NSCDs could be constructed as fluorescent probes for highly selective and sensitive sensing mercuric (Hg²⁺) and hypochlorite (ClO⁻) ions. As the addition of Hg²⁺ or ClO⁻ ions to the NSCDs, the fluorescence intensity was effectively quenched due to dynamic quenching. Under the optimal conditions, the linear response of the fluorescence intensity ranged from 0.7 μM to 15 μM with a detection limit of 0.54 μM and from 0.3 μM to 5.0 μM with a limit of detection of 0.29 μM for Hg²⁺ and ClO⁻ ions, respectively. Finally, the proposed method was successfully used for quantifying Hg²⁺ and ClO⁻ ions in spiked tap water samples.

Fluorescence 'turn-on' probe for Al3+ detection in water based on ZnS/ZnO quantum dots with excellent selectivity and stability

In this work, an efficient and stable fluorescent probe for Al³⁺was established. The fluorescent probe based on the fluorescence 'turn-on' mode of zinc sulfide crystal composite zinc oxide quantum dots (ZnS/ZnO QDs). The ZnS/ZnO QDs were synthesized via two-step method using L-Cysteine (L-Cys) as a sulfur source and stabilizer. In the synthesis of ZnS/ZnO QDs, the fluorescence of zinc oxide quantum dots (ZnO QDs) decreased and its stability increased in aqueous solution after the addition of L-Cys. In addition, the as-synthesized ZnS/ZnO QDs shows fluorescent enhancement to Al³⁺. The ZnS/ZnO QDs based fluorescence 'turn-on' probe presented wide linear ranges (1 nM-8μM and 8-100μM). The availability of as-established sensing probe was also estimated by real water sample tests. Furthermore, the fluorescent enhancing mechanism was carried out by recording the fluorescent lifetime of samples, which might be related to the QDs dispersion and charge transfer weaken.

Synthesis of carbon dots for Al3+ sensing in water by fluorescence assay

Fifty-four Eucommia ulmoides leaves were subjected to a hydrothermal technique to synthesize carbon dots (CDs) of 3.55 ± 1.45 nm size. The nanomaterial possessed excellent stability and strong fluorescence emission (φ_f 42.3%). In a neutral buffer solution, the fluorescence signals of CDs solution were enhanced by aluminium ion without interference from other ions. Degree of enhancement correlated linearly with the Al³⁺ content in the range 0.01-2.5 mM. Response of this method was fast and sensitive (detection limit was 23 nM). The CDs performed successfully as a sensitive sensor for trace Al³⁺ determination in water samples, and satisfactory results were obtained.

Phytochemicals toward Green (Bio)sensing

Because of numerous inherent and unique characteristics of phytochemicals as bioactive compounds derived from plants, they have been widely used as one of the most interesting nature-based compounds in a myriad of fields. Moreover, a wide variety of phytochemicals offer a plethora of fascinating optical and electrochemical features that pave the way toward their development as optical and electrochemical (bio)sensors for clinical/health diagnostics, environmental monitoring, food quality control, and bioimaging. In the current review, we highlight how phytochemicals have been tailored and used for a wide variety of optical and electrochemical (bio)sensing and bioimaging applications, after classifying and introducing them according to their chemical structures. Finally, the current challenges and future directions/perspective on the optical and electrochemical (bio)sensing applications of phytochemicals are discussed with the goal of further expanding their potential applications in (bio)sensing technology. Regarding the advantageous features of phytochemicals as highly promising and potential biomaterials, we envisage that many of the existing chemical-based (bio)sensors will be replaced by phytochemical-based ones in the near future.

Transforming glucose into fluorescent graphene quantum dots via microwave radiation for sensitive detection of Al3+ ions based on aggregation-induced enhanced emission

This paper initially describes a nanosensor for fluorescence detection of Al3+ ions by using graphene quantum dots (GQDs) that are synthesized via microwave-assisted single-step ring-closure condensation of glucose molecules. The one-pot synthesis strategy based on the microwave radiation could be finished in several minutes and no post-modification of the GQDs was required. In particular, the GQD nanoprobes showed a sensitive and specific fluorescence enhancement response to Al3+. The involved mechanism might be the Al3+-mediated aggregation of the GQDs leading to aggregation-induced enhanced emission (AIEE). Under optimal conditions, this new fluorescent nanosensor was able to quantitatively detect Al3+ in a linear concentration range of 0.4-500 μM. The limit of detection was estimated to be ∼59.8 nM according to the 3σ rule, which made it be among the most sensitive systems currently available for sensing the target ion. Moreover, satisfactory recovery results (ranging from 96.8 to 109.7%) of analyzing a set of real water examples additionally validated its accuracy for practical applications. Considering its simplicity, high sensitivity and specificity, low cost, and good reliability, the developed fluorescent nanosensing system for Al3+ holds great promise for broad uses in water safety, environmental monitoring, and waste management.

Metal Ion Detection by Carbon Dots-A Review

Development of economical, sensitive, selective and robust sensors for metal ion sensing is always fascinating for a chemist because traditional routs for their detection involve complicated instrumentation and critical sample preparation procedures. A large number of metal ion detectors including carbon dots (CDs) have been reported for sensitive and selective detection of metal ions. This review comprehensively explores the use of CDs as metallic cation sensors. CDs are being fabricated from variety of carbon sources by employing various synthetic channels. CDs are proved to be efficient colorimetric and fluorimetric detectors due to surface oxygen moieties which are responsible to co-ordinate with metal ions. Doping of CDs with hetero atom such as N, S, B etc. may further enhance their activity toward metal detection. Therefore, designing of CDs having selective sensing properties with low detection limits has gained significant interest.HighlightsCDs have gained much attention as chemical sensors due to their dynamic features i.e. less toxicity, stability, solubility in various solvents, absorption in UV/Vis. region, fluorescence and tunable physico-chemical properties.These are coast effective, sensitive and selective colorimetric and fluorimetric metal ion sensors.Detection of metal ions by CDs involves different mechanisms such as complexation, aggregation, electron transfer, inner filter effect etc.LOD data is an evidence of their greater efficiency.

A squaraine-based fluorescence turn on chemosensor with ICT character for highly selective and sensitive detection of Al3+ in aqueous media and its application in living cell imaging

A novel and simple squaraine-based fluorescent chemosensor SQ-BH bearing the benzoylhydrazine moiety was developed for the highly sensitive and selective detection of Al³⁺ in methanol-water mixture. The chemosensing behaviors of SQ-BH and its binding interaction with Al³⁺ were explored by various spectroscopic analyses. The reversibility of Al³⁺ recognition process was investigated using EDTA. The results of experiments and DFT/TDDFT calculations revealed that the chemosensor SQ-BH obeyed a turn on mechanism which was associated with the inhibited photoinduced electron transfer (PET), the enhanced intramolecular charge transfer (ICT) and the activated chelation enhanced fluorescence (CHEF). Furthermore, the fluorescent chemosensor SQ-BH whose excellent biocompatibility was confirmed by a standard MTT assay could be used to detect Al³⁺ in living cells, indicating its potential application value in biological fields.

N,S co-doped carbon dots as a dual-functional fluorescent sensor for sensitive detection of baicalein and temperature

In this work, nitrogen and sulfur dual-doped CDs (N,S-CDs) were prepared via a facile one-pot hydrothermal method from citric acid and N-acetyl-L-cysteine with a high quantum yield (QY) of 49%. As-fabricated N,S-CDs had a size around 2.5 nm and exhibited excitation-independent emission and excellent luminescent properties. The fluorescent sensor based on the N,S-CDs showed a highly sensitive detection of baicalein with a detection limit (LOD) of 0.21 μmol L^-1 in the linear range from 0.69 to 70.0 μmol L^-1. The fluorescence of the N,S-CDs could be effectively quenched by baicalein based on static quenching. In addition, the temperature sensor based on the synthesized N,S-CDs showed a good linear relationship between temperature and fluorescence (FL) intensity with a temperature range from 5 °C to 75 °C. Furthermore, the synthesized N,S-CDs were successfully applied to the measurement of baicalein in real samples. In a word, the N,S-CDs had great potential to be worked as fluorescence sensors to monitor the concentration of baicalein and temperature.

Targeted Development of Sustainable Green Catalysts for Oxidation of Alcohols via Tungstate-Decorated Multifunctional Amphiphilic Carbon Quantum Dots

Achieving green and sustainable chemical processes by replacing organic solvents with water has always been one of the green chemistry goals and a challenging topic for chemists. However, the poor solubility of organic materials is a major limitation to achieving this goal, especially in alcohol oxidation. In this contribution, the development and design of amphiphilic catalysts via abundant, safe, cheaper, and more biocompatible sources have received notable attention. To this purpose, herein, our group successfully synthesized a new multifunctional amphiphilic carbon quantum dot (CQD) composed of 1-aminopropyl-3-methyl-imidazolium chloride ([APMim][Cl]), dodecylamine (DDA), and citric acid (CA) (denoted as CQDs@DDA-IL/Cl) using a one-pot hydrothermal route. The CQDs@DDA-IL/Cl was then utilized as an amphiphilic stabilizer for anchoring tungsten ions using an anion-exchange method (marked as CQDs@DDA-IL/W). The CQDs@DDA-IL/W as a reusable catalyst selectivity mediated the oxidation of alcoholic substrates with stoichiometric H₂O₂ in water solvent. The extraordinary performance of our catalyst was attributable to the coexistence of ionic liquid (IL) and DDA upon the surface of the CQDs@DDA-IL/W, which plays a main duty in the hydrophobic/hydrophilic balance, and significantly increase the catalyst compatibility in the aqueous medium with the purpose of removing organic solvents. As a result, the great mass transfer occurs in the two-phase medium using this amphiphilic nanocatalyst without any phase transfer catalyst (PTC) or other additives. The 100% selectivity, excellent turnover number (TON) and turnover frequency (TOF), high yield, almost complete and fast conversion of alcohol to the desired aldehydes and ketones without more oxidation, and easy and no-trouble isolation of product and catalyst are outstanding features of this catalytic system.

Synthesis of Fluorescent Carbon Dots as Selective and Sensitive Probes for Cupric Ions and Cell Imaging

A novel sensing system has been designed for the detection of cupric ions. It is based on the quenched fluorescence signal of carbon dots (CDs), which were carbonized from poly(vinylpyrrolidone) (PVP) and L-Cysteine (CYS). Cupric ions interact with the nitrogen and sulfur atoms on surface of the CDs to form an absorbed complex; this results in strong quenching of the fluorescence of the CDs via a fast metal-to-ligand binding affinity. The synthesized water-soluble CDs also exhibited a quantum yield of 7.6%, with favorable photoluminescent properties and good photostability. The fluorescence intensity of the CDs was very stable in high ionic strength (up to 1.0 M NaCl) and over a wide range of pH levels (2.0-12.0). This facile method can therefore develop a sensor that offers reliable, fast, and selective detection of cupric ions with a detection limit down to 0.15 μM and a linear range from 0.5 to 7.0 μM (R2 = 0.980). The CDs were used for cell imaging, observed that they were low toxicity to Tramp C1 cells and exhibited blue and green and red fluorescence under a fluorescence microscope. In summary, the CDs exhibited excellent fluorescence properties, and could be applied to the selective and sensitive detection of cupric ion and multicolor cell imaging.

Bioimaging Applications of Carbon Nanodots: A Review

Carbon nanodots (CNDs) is the newest member of carbon-based nanomaterials and one of the most promising for the development of new, advanced applications. Owing to their unique and unparalleled physicochemical and photoluminescent properties, they are considered to be a rising star among nanomaterials. During the last decade, many applications have been developed based on CNDs. Among others, they have been used as bioimaging agents to label cells and tissues. In this review, we will discuss the advancements in the applications of CNDs in in the field of imaging, in all types of organisms (i.e., prokaryotes, eukaryotes, and animals). Selective imaging of one type of cells over another, imaging of (bio)molecules inside cells and tumor-targeting imaging are some of the studies that will be discussed hereafter. We hope that this review will assist researchers with obtaining a holistic view of the developed applications and hit on new ideas so that more advanced applications can be developed in the near future.

Hydrophobic carbon dots with blue dispersed emission and red aggregation-induced emission

Carbon dots (CDs) have been studied for years as one of the most promising fluorescent nanomaterials. However, CDs with red or solid-state fluorescence are rarely reported. Herein, through a one-pot solvothermal treatment, hydrophobic CDs (H-CDs) with blue dispersed emission and red aggregation-induced emission are obtained. When water is introduced, the hydrophobic interaction leads to aggregation of the H-CDs. The formation of H-CD clusters induces the turning off of the blue emission, as the carbonized cores suffer from π-π stacking interactions, and the turning on of the red fluorescence, due to restriction of the surfaces' intramolecular rotation around disulfide bonds, which conforms to the aggregation-induced-emission phenomenon. This on-off fluorescence of the H-CDs is reversible when the H-CD powder is completely dissolved. Moreover, the H-CD solution dispersed in filter paper is nearly colorless. Finally, we develop a reversible two switch-mode luminescence ink for advanced anti-counterfeiting and dual-encryption.

A review on nanostructured carbon quantum dots and their applications in biotechnology, sensors, and chemiluminescence

Carbon quantum dots (CQDs) are a member of carbon nanostructures family which have received increasing attention for their photoluminescence (PL), physical and chemical stability and low toxicity. The classical semiconductor quantum dots (QDs) are semiconductor particles that are able to emit fluorescence by excitation. The CQDs is mainly referred to photoluminescent carbon nanoparticles less than 10 nm, with surface modification or functionalization. Contrary to other carbon nanostructures, CQDs can be synthesized and functionalized fast and easily. The fluorescence origin of the CQDs is a controversial issue which depends on carbon source, experimental conditions, and functional groups. However, PL emissions originated from conjugated π-domains and surface defects have been proposed for the PL emission mechanisms of the CQDs. These nanostructures have been used as nontoxic alternatives to the classical heavy metals containing semiconductor QDs in some applications such as in-vivo and in-vitro bio-imaging, drug delivery, photosensors, chemiluminescence (CL), and etc. This paper will introduce CQDs, their structure, and PL characteristics. Recent advances of the application of CQDs in biotechnology, sensors, and CL is comprehensively discussed.

A novel chromone and rhodamine derivative as fluorescent probe for the detection of Zn(II) and Al(III) based on two different mechanisms

In this study, a novel fluorescent probe, 6‑hydroxychromone‑3‑carbaldehyde‑(rhodamine B carbonyl) hydrazine (L), for Zn²⁺ and Al³⁺ was designed and synthesized. Initially, this probe L exhibited inferior fluorescence emission peak centered at 488 nm in EtOH/HEPES solution (3/1, 10.0 μM HEPES, pH 7.4) when excited at 421 nm. After the addition of Zn²⁺, this probe L displayed excellent selectivity towards Zn²⁺ with obvious fluorescence color change from colorless to yellow, which might be attributed to the formation of a 1:1 ligand-metal complex resulting in the inhibition of photo-induced electron transfer phenomenon. Whereas, the prepared Zn²⁺ complex of L could be used as a ratiometric fluorescent probe to detect Al³⁺ on the basis of fluorescence resonance energy transfer mechanism. This ligand-metal complex of Zn²⁺ (LZn) showed high selectivity towards Al³⁺ with obvious enhancement in fluorescence emission intensity at 580 nm and remarkable decrease in fluorescence emission intensity at 488 nm, and the fluorescence color also changed from yellow to pink. Furthermore, the detection limit of the probe L, LZn towards Zn²⁺, Al³⁺ were 1.25 × 10^-7 M and 3.179 × 10^-6 M, respectively. Additionally, the complexation properties of L towards Zn²⁺ and LZn towards Al³⁺ were studied in detail.

One-step solvothermal synthesis of high-emissive amphiphilic carbon dots via rigidity derivation

In nanoscience, amphiphilic carbon dots (ACDs) are of great importance due to their excellent transferability for application in biological sensing, imaging and labelling. However, facile synthetic strategies are still limited, especially for obtaining high-emissive ACDs. Since the development of a high-emissive feature is strongly desired for improving the practical resolution in vivo, here we report a chemical strategy that uses rigid molecules to straightforwardly construct amphiphilic carbon dots (ACDs) with high luminescence quantum yields (QYs). By using 1-[bis(dimethylamino)methylene]-1H-1,2,3-triazolo[4,5-b]pyridinium 3-oxide hexafluorophosphate (HATU), a typical coplanar compound, as the only precursor, well-defined ACDs were prepared via a one-step solvothermal process which exhibited a superior QY of up to 29%, largely superior to those prepared from precursors with less rigid structures. The effect can be mainly attributed to a significant suppression of the competition of non-radiative decay through rigidity derivation. Metal ionic doping during the synthesis resulted in a further improvement of the crystallinity and monodispersity of the materials, with retention of the high-emissive ability. This high-emissive photoluminescence behavior of the ACDs is accompanied with an excitation-wavelength dependence, a high biocompatibility and a low toxicity, which together make the ACDs advantageous for application in multi-channel bioimaging.

NIR upconversion characteristics of carbon dots for selective detection of glutathione

In the current study, we report the near infrared (NIR) upconversion (in the range of 850–950 nm) properties of carbon nanoparticles and their utility as a fluorescence probe for selective and sensitive detection of glutathione (GSH).

Facile approach to synthesize highly fluorescent multicolor emissive carbon dots via surface functionalization for cellular imaging

Luminescent nanomaterials are encouraging scaffolds for diverse applications such as chemical sensors and biosensors, imaging, drug delivery, diagnostics, catalysis, energy, photonics, medicine, and so on. Carbon dots (CDs) are a new class of luminescent carbonaceous nanomaterial that have appeared recently and reaped tremendous scientific interest. Herein, we have exploited a simple approach to prepare tuneable and highly fluorescent CDs via surface functionalization. The successful synthesis of CDs is manifested from several investigations like high-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). The CDs exhibit excellent water solubility and with increasing nitrogen content fluorescence quantum yield increases whereas cell toxicity decreases. The CD synthesized at high temperature (180 °C) shows very high quantum yield (more than 56%). The tuneable optical properties of CDs are systematically studied using UV-vis and fluorescence spectroscopy. The cell viability evaluation and in vitro imaging study reveals that the synthesized CDs can be employed as a potential fluorescent probe for bio-imaging without further modification.