Silica stationary phase functionalized by 4-carboxy-benzoboroxole with enhanced boronate affinity nature for selective capture and separation of cis-diol compounds

Two-dimensional boron nanosheets for selective enrichment and detection of cis-diol compounds by surface-assisted laser desorption/ionization time-of-flight mass spectrometry

Surface-assisted laser desorption/ionization time-of-flight mass spectrometry (SALDI-TOF MS) is an effective method for detecting of low-mass molecules. In this study, two-dimensional boron nanosheets (2DBs) were fabricated through thermal oxidation etching and coupling liquid exfoliation technologies, and applied as a matrix and selective sorbent for detecting cis-diol compounds by SALDI-TOF MS. The outstanding nanostructure and boric acid active sites of 2DBs endow them with sensitivity for cis-diol compound detection, excellent selectivity, and low background interference for complex samples. The specific in-situ enrichment faculty of the 2DBs as a matrix was investigated by SALDI-TOF MS using glucose, arabinose, and lactose as model analytes. In the presence of 100 -fold more interfering substances, the 2DBs showed high selectivity against cis-diol compounds, and exhibited a better sensitivity and a reduced limit of detection through enrichment treatment than graphene oxide matrices. The linearity, limit of detection (LOD), reproducibility, and accuracy of the method were evaluated under optimized conditions. The results showed that the linear relationships of six saccharides remained in the range of 0.05-0.6 mM with a correlation coefficient r ≥0.98. The LODs of six saccharides were 1 nM (glucose, lactose, mannose, fructose) and 10 nM (galactose, arabinose). Sample-to-sample (n = 6) with relative standard deviations (RSDs) of 3.2% to 8.1% were observed. Recoveries (n = 5) of 87.9-104.6% were obtained at three spiked levels in the milk samples. The proposed strategy promoted the development of a matrix for use with SALDI-TOF MS detection, in which the UV absorption properties and enrichment capabilities of 2DBs were combined.

Analysis of carbohydrates and glycoconjugates by matrix-assisted laser desorption/ionization mass spectrometry: An update for 2017-2018

This review is the tenth update of the original article published in 1999 on the application of matrix-assisted laser desorption/ionization mass spectrometry (MALDI) mass spectrometry to the analysis of carbohydrates and glycoconjugates and brings coverage of the literature to the end of 2018. Also included are papers that describe methods appropriate to glycan and glycoprotein analysis by MALDI, such as sample preparation techniques, even though the ionization method is not MALDI. Topics covered in the first part of the review include general aspects such as theory of the MALDI process, new methods, matrices, derivatization, MALDI imaging, fragmentation and the use of arrays. The second part of the review is devoted to applications to various structural types such as oligo- and poly-saccharides, glycoproteins, glycolipids, glycosides, and biopharmaceuticals. Most of the applications are presented in tabular form. The third part of the review covers medical and industrial applications of the technique, studies of enzyme reactions, and applications to chemical synthesis. The reported work shows increasing use of combined new techniques such as ion mobility and highlights the impact that MALDI imaging is having across a range of diciplines. MALDI is still an ideal technique for carbohydrate analysis and advancements in the technique and the range of applications continue steady progress.

[Advances in enrichment and separation of cis-diol-containing compounds by porous organic frameworks]

The design and synthesis of boronate affinity materials that show high efficiency, high selectivity, and high enrichment performance have gained significant attention. The principle of boronate affinity relies on the reversible covalent reactions, including the formation of stable five-membered or six-membered cyclic esters with cis-diol-containing compounds in alkaline aqueous media and dissociation of cyclic esters in an acidic surrounding to release cis-diol-containing compounds. Recently, various boronate affinity materials have been synthesized and utilized for selective enrichment of these compounds. Metal organic frameworks (MOFs) and covalent organic frameworks (COFs) have been widely used in chromatographic separation and sample pretreatment because of their adjustable pore size, high porosity, high specific surface area, tunable skeleton structure, and favorable chemical and thermal stability. To promote the enrichment selectivity of MOFs and COFs for cis-diol-containing compounds, boronic acid-functionalized MOFs and COFs with various structures and categories have been synthesized. This review summarizes more than 80 investigations into the categories, synthetic strategies, and applications of boronic acid-functionalized MOFs and COFs from the Science Citation Index. These synthesis methods include metal ligand-fragment co-assembly, post-synthetic modification, and bottom-up modification of boronic acid-functionalized porous materials. Although two modification strategies (post-synthetic and metal ligand-fragment co-assembly) have been introduced for the preparation of boronic acid-functionalized MOFs, the latter is more commonly adopted as it improves the enrichment selectivity and enrichment efficiency of MOFs. The common limitations of MOFs such as aggregation and aperture issues were also resolved. Boron affinity MOFs possessing favorable properties according to the characteristics of cis-diol-containing compounds, have also been synthesized. Furthermore, to facilitate enrichment and separation, many boronic acid-functionalized magnetic material MOFs have been developed for the enrichment and analysis of cis-diol-containing compounds. Additionally, the luminescent properties of Ln-MOFs have been used in combination with boronic acid affinity for the enrichment, separation, and subsequent detection of cis-diol-containing compounds. Post-synthetic modification and the bottom-up strategy are the primary methods for the preparation of boronic acid-functionalized COFs. Boronic acid-functionalized COFs are less investigated than boronic acid-functionalized MOFs, likely due to the greater complexity of COF synthesis. This work aims to summarize the research advances, synthesis ideas, and synthesis methods related to boric acid-functionalized porous organic frameworks, which will provide theoretical guidance and technical support for its applications while accelerating the commercialization of such organic frameworks.

Boronate-modified polyethyleneimine dendrimer as a solid-phase extraction adsorbent for the analysis of luteolin via HPLC

Luteolin (LTL) is a flavonoid containing a cis-diol, which has significant anti-inflammatory, anti-allergic, anti-diabetic, anti-cancer and neuroprotective activities. In this work, a silver modified boric acid affinity polyvinyl imine (PEI) dendritic adsorbent (PPEI-Ag@CPBA) was prepared on polystyrene (PS) for the rapid recognition and selective separation of LTL. A thin layer of polydopamine (PDA) was formed on the surface of the substrate by self-polymerization, and a PDA-coated PS material (PS@PDA) was obtained. PEI with sufficient active amino groups was grafted onto PS@PDA to obtain a PEI-modified material (PS@PDA@PEI), then AgNO3 was reduced with NaBH4, and PS@PDA@PEI was embedded on Ag. Finally, PPEI-Ag@CPBA was obtained through the condensation reaction of PEI with 4-carboxyphenyl boric acid (CPBA). The adsorption conditions were optimized, the optimal pH and the optimum amount of adsorbent were determined, and the maximum adsorption capacity was found to be 2.49 mg g-1. This method has been successfully applied to the selective identification of LTL in peanut shell samples, and provides a practical platform for the detection of LTL in complex substrates.

Hydrophilic carrageenan functionalized magnetic carbon-based framework linked by silane coupling agent for the enrichment of N-glycopeptides from human saliva

In this work, a magnetic graphene material coated with mesoporous silica was selected as the substrate, 3-glycidoxypropyltrimethoxysilane and polyethyleneimine were sequentially bonded through chemical reactions, and then carrageenan was successfully introduced by electrostatic interaction; finally, hydrophilic nanocomposite material was prepared. Due to the large number of hydrophilic groups, and polyethyleneimine was connected by means of chemical bonds, this material exhibits good hydrophilicity and stability for glycopeptide enrichment. In the actual enrichment process, nanomaterial exhibits high selectivity (1:500), high sensitivity (2 fmol), and good repeatability (five cycles). In addition, the synthesized material also shows a good enrichment effect in the face of actual complex biological samples, which captured 40 N-glycopeptides from human saliva, indicating the application potential for enrichment of N-glycopeptides.

Preparation of Boronic Acid-Functionalized Cryogels Using Modular and Clickable Building Blocks for Bacterial Separation

Composite cryogels containing boronic acid ligands are synthesized for effective separation and isolation of bacteria. The large and interconnected pores in cryogels enable fast binding and release of microbial cells. To control bacterial binding, an alkyne-tagged boronic acid ligand is conjugated to azide-functionalized cryogel via the Cu(I)-catalyzed azide-alkyne cycloaddition reaction. The boronic acid-functionalized cryogel binds Gram-positive and Gram-negative bacteria through reversible boronate ester bonds, which can be controlled by pH and simple monosaccharides. To increase the capacity of affinity separation, a new approach is used to couple the alkyne-tagged phenylboronic acid to cryogel via an intermediate polymer layer that provides multiple immobilization sites. The morphology and chemical composition of the composite cryogel are characterized systematically. The capability of the composite cryogel for the separation of Gram-positive and Gram-negative bacteria is investigated. The binding capacities of the composite cryogel for Escherichia coli and Staphylococcus epidermidis are 2.15 × 10⁹ and 3.36 × 10⁹ cfu/g, respectively. The bacterial binding of the composite cryogel can be controlled by adjusting pH. The results suggest that the composite cryogel may be used as affinity medium for rapid separation and isolation of bacteria from complex samples.

Affinity chromatography: A review of trends and developments over the past 50 years

The field of affinity chromatography, which employs a biologically-related agent as the stationary phase, has seen significant growth since the modern era of this method began in 1968. This review examines the major developments and trends that have occurred in this technique over the past five decades. The basic principles and history of this area are first discussed. This is followed by an overview of the various supports, immobilization strategies, and types of binding agents that have been used in this field. The general types of applications and fields of use that have appeared for affinity chromatography are also considered. A survey of the literature is used to identify major trends in these topics and important areas of use for affinity chromatography in the separation, analysis, or characterization of chemicals and biochemicals.

Isolation of RNA and beta-NAD by phenylboronic acid functionalized, monodisperse-porous silica microspheres as sorbent in batch and microfluidic boronate affinity systems

Monodisperse-porous silica microspheres 5.5 μm in size were obtained by a staged shape templated hydrolysis-condensation method, with a bimodal pore-size distribution. 3-aminophenylboronic acid (APBA) was covalently attached onto the silica microspheres with a capacity of 0.476 mmol APBA/g microspheres. The boronate affinity isolation behaviour of ribonucleic acid (RNA) containing cis-diol at 3'-end was investigated by using APBA attached-silica microspheres as the sorbent in batch fashion. A short-chain diol carrying agent, β-nicotinamide adenine dinucleotide (β-NAD) was used as a target molecule with stronger affinity for phenylboronic acid ligand. The maximum equilibrium adsorptions for RNA and β-NAD were determined as 60 and 159 mg/g sorbent, respectively. By using the synthesized sorbent, phosphate buffer at pH 7.0 containing sorbitol was successfuly used as a mild elution medium for obtaining quantitative desorptions with both RNA and β-NAD. RNA isolations from mammalian and bacterial cells were successfully performed while protecting the structural integrity of RNA via boronate affinity interaction in batch fashion. A microfluidic boronate affinity system including a microcolumn 300 μm in diameter was also constructed using APBA attached-silica microspheres as the stationary phase. The breakthrough curves of microfluidic system were obtained by studying with different feed concentrations of RNA and β-NAD. Quantitative desorptions and satisfactory isolation yields were obtained with RNA and β-NAD in the microfluidic system. The proposed system is useful for boronate affinity applications in genomics or proteomics in which valuable cis-diols at low concentrations are recovered from low-volume samples.