Preparation and evaluation of maltose modified polymer-silica composite based on cross-linked poly glycidyl methacrylate as high performance liquid chromatography stationary phase

Preparation of Protein A Membrane Adsorbers Using Strain-Promoted, Copper-Free Dibenzocyclooctyne (DBCO)-Azide Click Chemistry

Protein A chromatography is the preferred unit operation for purifying Fc-based proteins. Convective chromatography technologies, like membrane adsorbers, can perform the purification rapidly and improve throughput dramatically. While the literature reports the preparation of Protein A membrane adsorbers utilizing traditional coupling chemistries that target lysine or thiol groups on the Protein A ligand, this study demonstrates a new approach utilizing copper-free dibenzocyclooctyne (DBCO)-azide click chemistry. The synthetic pathway consists of three main steps: bioconjugation of Protein A with a DBCO-polyethylene glycol (PEG) linker, preparation of an azide-functionalized membrane surface, and click reaction of DBCO-Protein A onto the membrane surface. Using polyclonal human immunoglobulins (hIgG) as the target molecule, Protein A membranes prepared by this synthetic pathway showed a flowrate-independent dynamic binding capacity of ~10 mg/mL membrane at 10% breakthrough. Fitting of static binding capacity measurements to the Langmuir adsorption isotherm showed a maximum binding (qmax) of 27.48 ± 1.31 mg/mL and an apparent equilibrium dissociation constant (Kd) of value of 1.72 × 10-1 ± 4.03 × 10-2 mg/mL. This work represents a new application for copper-less click chemistry in the membrane chromatography space and outlines a synthetic pathway that can be followed for immobilization of other ligands.

Preparation of polyacrylamide hydrophilic stationary phases with adjustable performance

Polymer modified silica materials are widely used as stationary phases in hydrophilic interaction liquid chromatography (HILIC), whereas a stationary phase with excellent performance is highly desired. In this study, vinyl modified silica was first synthesized through a silane coupling reaction, and then a polyacrylamide modified silica (PAM-SIL) stationary phase was successfully prepared using acrylamide as a copolymer monomer via free radical polymerization. The retention behaviors of polar analytes on the stationary phase under various chromatographic conditions, including acetonitrile content, buffer concentration and pH values were investigated, and a typical hydrophilic interaction retention mechanism was inferred. Exceptionally, the separation performance of the stationary phases could be regulated by controlling the polymer structure. Model analytes separated rapidly on the stationary phase which has an optimal grafting amount of vinyl, with the highest number of theoretical plates of orotic acid reaching 119,966/m. While the stationary phases with high acrylamide concentrations exhibited enhanced retention behavior and higher resolution for analytes. The adjustable separation performance will have huge potential in future separation and analysis applications.

Dendritic organic molecular gel coating with molecular shape selectivity and its application in selective separation by liquid chromatography

Dendritic organic molecular gels are a promising class of three-dimensional network compounds. Here, we have synthesized a new type of dendritic organic molecular gel stationary phase (SiO₂-G3) by using benzyl alcohol as raw material and dimethyl 5-hydroxyisophthalate as growth unit to synthesize a third-generation organic molecular gel G3, which grafted onto the silica surface by cyanogen chloride (CC). The developed stationary phase not only exhibits high molecular shape selectivity but also has a RPLC/HILIC/IEC mixed-mode characteristic for HPLC due to the ordered structure, the multiple strong π-π stacking interactions and the introduction of a hydrophilic triazine fraction during the grafting process. Compared with a commercial C₁₈ column, the developed column exhibited flexible selectivity, enhanced separation performance and excellent separation of monosubstituted benzene, polycyclic aromatic hydrocarbons (PAHs), positional isomers, nucleosides and nucleobases, benzoic acid and aniline compounds. In addition, the new column provided baseline separation of polycyclic aromatic hydrocarbon contaminants in Yellow River water, verifying its potential for application in the analysis of real samples.

Contribution of the "Click Chemistry" Toolbox for the Design, Synthesis, and Resulting Applications of Innovative and Efficient Separative Supports: Time for Assessment

The last two decades have seen the rapid expansion of click chemistry methodology in various domains closely related to organic chemistry. It has notably been widely developed in the area of surface chemistry, mainly because of the high-yielding character of reactions of the "click" type. Especially, this powerful chemical reaction toolbox has been adapted to the preparation of stationary phases from the corresponding chromatographic supports. A plethora of selectors can thus be immobilized on either organic, inorganic, or hybrid stationary phases that can be used in different chromatographic modes. This review first highlights the few different chemical ligation strategies of the "click" type that are up to now mainly devoted to the development of functionalized supports for separation sciences. Then, it gives in a second part an up-to-date survey of the different studies dedicated to the preparation of click chemistry-based chromatographic supports while highlighting the powerful and versatile character of the "click" ligation strategy for the design, synthesis, and developments of more and more complex systems that can find promising applications in the area of analytical sciences, in domains as varied as enantioselective separation, glycomics, proteomics, genomics, metabolomics, etc.

Development and chromatographic exploration of stable-bonded crosslinked amino silica against classical amino phases

The present work reports on a novel stable-bonded amino silica stationary phase obtained by crosslinking of surface aminopropyl moieties using triglycidyl isocyanurate. The obtained crosslinked amido-amino network silica material exhibited superior hydrolytic stability compared to classical 3-aminopropyl phases and showed, inter alia, excellent separation of nine therapeutically effective sulfonamides in hydrophilic interaction / weak anion exchange chromatography elution mode. Additionally, the separation of carbohydrates was investigated under classical hydrophilic interaction chromatography conditions as well proving the suitability of the novel phase for such applications. For the evaluation of the hydrolytic stability the prepared material, as well as two commercially available benchmark columns and a set of in-house synthesized amino modified materials, were exposed to harsh aqueous mobile phase conditions for in total 50 hours at elevated temperature. In this context, the materials were examined by elemental analysis, (¹³ C and ²⁹ Si cross-polarization/magic angle spinning) solid-state NMR and a chromatographic test before and subsequent to the exposure to these stress conditions. Lastly, the new stationary phase was classified in comparison to a set of commercially available stationary phases by principal component analysis of resultant retention factors gained from chromatographic standard tests. This article is protected by copyright. All rights reserved.

Recent Developments of Liquid Chromatography Stationary Phases for Compound Separation: From Proteins to Small Organic Compounds

Compound separation plays a key role in producing and analyzing chemical compounds. Various methods are offered to obtain high-quality separation results. Liquid chromatography is one of the most common tools used in compound separation across length scales, from larger biomacromolecules to smaller organic compounds. Liquid chromatography also allows ease of modification, the ability to combine compatible mobile and stationary phases, the ability to conduct qualitative and quantitative analyses, and the ability to concentrate samples. Notably, the main feature of a liquid chromatography setup is the stationary phase. The stationary phase directly interacts with the samples via various basic mode of interactions based on affinity, size, and electrostatic interactions. Different interactions between compounds and the stationary phase will eventually result in compound separation. Recent years have witnessed the development of stationary phases to increase binding selectivity, tunability, and reusability. To demonstrate the use of liquid chromatography across length scales of target molecules, this review discusses the recent development of stationary phases for separating macromolecule proteins and small organic compounds, such as small chiral molecules and polycyclic aromatic hydrocarbons (PAHs).

A Survey of Polar Stationary Phases for Hydrophilic Interaction Chromatography and Recent Progress in Understanding Retention and Selectivity

Various polar stationary phases have become available for hydrophilic interaction chromatography (HILIC) and help drive continuous applications in biomedical, environmental and pharmaceutical areas in the past decade. Although the stationary phases for HILIC have been reviewed previously, it is an appropriate time to take another look at the progresses during the past five years. The current review provides an overview of the polar stationary phases commercially available for HILIC applications in an effort to assist scientists in selecting suitable columns. New types of stationary phase that were published in literature in the past five years are summarized and discussed. The trend in stationary phase research and development is also highlighted. Of particular interest is the experimental evidence for direct interactions of polar analytes with the ligands of the stationary phases under HILIC conditions. In addition, two different approaches have been developed to delineate the relative significance of the partitioning and adsorption mechanisms in HILIC, representing an important advancement in our understanding of the retention mechanisms in HILIC.

An alternative strategy to construct uniform MOFs-Grafted silica core-shell composites as mixed-mode stationary phase for chromatography separation

The preparation of the metal-organic frameworks (MOFs)@silica core-shell microspheres as the stationary phases mainly relied on the method of electrostatic interaction between the metal ions of MOFs and the silanol groups. Herein, the ligands of MOFs were preferentially modified to the surface of silica as connection points and seed crystals to connect or form the MOFs. In this way, the evenness of the MOFs particles on the silica surface was effectively improved, and the prepared composites possessed excellent reproducibility and stability, including acid-base stability. The relative standard deviation of the retention time for repeatability ranged from 0.1% to 0.26% and for stability retention time from 0.3% to 0.6%. Compared with commercial columns, the prepared stationary phase showed enhanced separation selectivity for separation of both hydrophilic and hydrophobic compounds containing alkaloids, nucleosides, antibiotics and alkylbenzenes, etc. The obtained column was used as a matrix for fast separation and analysis of antibiotics in actual samples. In short, the composites showed superior reproducibility, stability and satisfactory separation performance towards a variety of compounds in the studied conditions. It also provided another way to improve the evenness of MOFs particles on the surface of silica and enhance the stability of them under polar conditions.

N-Vinyl pyrrolidone and undecylenic acid copolymerized on silica surface as mixed-mode stationary phases for reversed-phase and hydrophilic interaction chromatography

In this work, three new mixed-mode stationary phases were prepared, based on different ratio of N-vinyl pyrrolidone (NVP) copolymerized together with undecylenic acid (UA) on silica microspheres surface without silanization, which named Sil@NVPUA series. The combination of NVP and UA rendered the Sil@NVPUA suitable for reversed-phase liquid chromatography (RPLC) and hydrophilic interaction liquid chromatography (HILIC), and shown excellent methyl, planar, isomers and ion selectivity. Five types of model analytes including eight polycyclic aromatic hydrocarbons, six alkylbenzenes, eight nucleosides and nucleobases, seven ginsenosides and five oxazolidinones can be well separated on this stationary phase. The preparation method of NVP and UA modified silica-based stationary phase is simple, and it also provides a new idea for the design of synthetic polymers to develop mixed-mode chromatography.

Facile fabrication of silica@covalent organic polymers core-shell composites as the mixed-mode stationary phase for hydrophilic interaction/reversed-phase/ion-exchange chromatography

Covalent organic polymers (COPs) are a promising class of cross-linked polymeric networks that attracted extensive attention in separation and analysis fields. Exploring facile and convenient strategy to prepare COPs-based mixed-mode stationary phases for high performance liquid chromatography (HPLC) has seriously lagged and has never been reported. Herein, we describe a facile in-situ grow strategy for fabrication of silica@COPs core-shell composites (SiO₂@TpBD-(OH)₂) as a novel mixed-mode stationary phase for HPLC. Owing to the co-existing of abundant hydroxyl, carbonyl, imine, cyclohexyl groups, and benzene rings in the skeleton of COPs shell, the developed mixed-mode stationary phase exhibits hydrophilic interaction liquid chromatography (HILIC)/reversed-phase liquid chromatography (RPLC)/ion-exchange chromatography (IEX) retention mechanisms. The content of acetonitrile, pH value, and salt concentration in the mobile phase were investigated on SiO₂@TpBD-(OH)₂ packed column. In comparison to conventional single-mode columns, the SiO₂@TpBD-(OH)₂ column showed flexible selectivity, enhanced separation performance, and superior resolution for benzene homologues, polycyclic aromatic hydrocarbons, nucleosides and bases, and acidic organic compounds. The column efficiency of p-nitrobenzoic acid was up to 54440 plates per meter. The packed column also possessed outstanding chromatographic repeatability for six nucleosides and bases with the RSDs of 0.07-0.23%, 0.58-1.77%, and 0.31-1.23% for retention time, peak area, and peak height, respectively. Besides, the SiO₂@TpBD-(OH)₂ column offered baseline separation of multiple organic pollutants in lake water, which verified its great potential in real sample analysis. Overall, the silica@COPs core-shell composites not only provide a new candidate of mixed-mode stationary phases, but also extend the potential application of COPs in separation science.

Fabrication and evaluation of tetraazahexaphenylmacrocycle-bonded stationary phase with multiple retention mechanisms

A 34-membered tetraazahexaphenylmacrocycle (N₄Ph₆) with a rigid π-conjugated moiety was chemically bonded to silica gel with 3-chloropropyltrimethoxysilane as the coupling agent to prepare a novel SiO₂@N₄Ph₆ stationary phase. Several common organic analytes, including alkylbenzenes, polycyclic aromatic hydrocarbons, anilines, phenols, phthalates, and folic acid, were selected as probes to investigate its chromatographic performance. The as-developed SiO₂@N₄Ph₆ stationary phase showed superiority retention and high selectivity for probe molecules through multiple interactions, including hydrophobic, π-π, hydrogen-bonding, and steric interactions. Density functional theory calculation results using folic acid as model solute provided an intuitive and a quantitative description of the multiple retention mechanisms.

Synthesis and chromatographic evaluation of pyrazinedicarboxylic anhydride bonded stationary phase

A silica based hydrophilic stationary phase bonding with 2,3-pyrazinedicarboxylic anhydride and amino groups was synthesized via amino-acid anhydride ring opening reaction. The bonded groups could not only provide hydrophilic interaction, but also electrostatic, π-π and hydrogen bonding interactions, etc. The results of characterization with elemental analysis and solid-state ¹³C cross-polarization magic-angle-spinning NMR indicated the successful preparation of amino and carboxyl bonded stationary phase named ZAC. The ζ-potential of ZAC stationary phase showed the negatively charge was dominate at pH larger than 3.5. Chromatographic evaluation revealed that ZAC stationary phase behaved well under HILIC mode. It showed different selectivity and retention compared to some typical commercial columns, and it was validated by the separation of chitooligosaccharides, flavonoid glycosides, organic acids and alkaloid samples. Based on the different selectivity between ZAC stationary phase and C18 columns, ZAC stationary phase also showed different selectivity with C18. And it was verified by the separation of Lonicerae Japonicae Flos and Menispermi Rhizoma extracts.

The preparation of a core–shell stationary phase by the in situ polymerization of a hydrophilic polymer on the surface of silica and its chromatographic performance

A method for the in situ polymerization of polymers on a silica surface was developed.

Photo-controlled release of metal ions using triazoline-containing amphiphilic copolymers

Photo-controlled release of metal ions can be achieved by denitrogenation of triazoline from the micelles of amphiphilic copolymer, and has potential applications for biomedicines.