Rapid separation of isomeric perfluoroalkyl substances by high-resolution differential ion mobility mass spectrometry

A multi-platform approach for the comprehensive analysis of per- and polyfluoroalkyl substances (PFAS) and fluorine mass balance in commercial ski wax products

The unique properties of per- and polyfluoroalkyl substances (PFAS) have led to their extensive use in consumer products, including ski wax. Based on the risks associated with PFAS, and to align with PFAS regulations, the international ski federation (FIS) implemented a ban on products containing "C8 fluorocarbons/perfluorooctanoate (PFOA)" at all FIS events from the 2021/2022 season, leading manufactures to shift their formulations towards short-chain PFAS chemistries. To date, most studies characterising PFAS in ski waxes have measured a suite of individual substances using targeted analytical approaches. However, the fraction of total fluorine (TF) in the wax accounted for by these substances remains unclear. In this study, we sought to address this question by applying a multi-platform, fluorine mass balance approach to a total of 10 commercially available ski wax products. Analysis of TF by combustion ion chromatography (CIC) revealed concentrations of 1040-51700 μg F g-1 for the different fluorinated waxes. In comparison, extractable organic fluorine (EOF) determined in methanol extracts by CIC (and later confirmed by inductively-coupled plasma-mass spectrometry and 19F- nuclear magnetic resonance spectroscopy) ranged from 92 to 3160 μg g-1, accounting for only 3-8.8 % of total fluorine (TF). Further characterisation of extracts by cyclic ion mobility-mass spectrometry (IMS) revealed 15 individual PFAS with perfluoroalkyl carboxylic acid concentrations up to 33 μg F g-1, and 3 products exceeding the regulatory limit for PFOA (0.025 μg g-1) by a factor of up to 100. The sum of all PFAS accounted for only 0.01-1.0 % of EOF, implying a high percentage of unidentified PFAS, thus, pyrolysis gas chromatography-mass spectrometry was used to provide evidence of the nature of the non-extractable fluorine present in the ski wax products.

Soluble metal porphyrins - Zero-valent zinc system for effective reductive defluorination of branched per and polyfluoroalkyl substances (PFASs)

Nano zero-valent metals (nZVMs) have been extensively utilized for decades in the reductive remediation of groundwater contaminated with chlorinated organic compounds, owing to their robust reducing capabilities, simple application, and cost-effectiveness. Nevertheless, there remains a dearth of information regarding the efficient reductive defluorination of linear or branched per- and polyfluoroalkyl substances (PFASs) using nZVMs as reductants, largely due to the absence of appropriate catalysts. In this work, various soluble porphyrin ligands [[meso‑tetra(4-carboxyphenyl)porphyrinato]cobalt(III)]Cl·7H2O (CoTCPP), [[meso‑tetra(4-sulfonatophenyl) porphyrinato]cobalt(III)]·9H2O (CoTPPS), and [[meso‑tetra(4-N-methylpyridyl) porphyrinato]cobalt(II)](I)4·4H2O (CoTMpyP) have been explored for defluorination of PFASs in the presence of the nZn0 as reductant. Among these, the cationic CoTMpyP showed best defluorination efficiencies for br-perfluorooctane sulfonate (PFOS) (94%), br-perfluorooctanoic acid (PFOA) (89%), and 3,7-Perfluorodecanoic acid (PFDA) (60%) after 1 day at 70 °C. The defluorination rate constant of this system (CoTMpyP-nZn0) is 88-164 times higher than the VB12-nZn0 system for the investigated br-PFASs. The CoTMpyP-nZn0 also performed effectively at room temperature (55% for br-PFOS, 55% for br-PFOA and 25% for 3,7-PFDA after 1day), demonstrating the great potential of in-situ application. The effect of various solubilizing substituents, electron transfer flow and corresponding PFASs defluorination pathways in the CoTMpyP-nZn0 system were investigated by both experiments and density functional theory (DFT) calculations. SYNOPSIS: Due to the unavailability of active catalysts, available information on reductive remediation of PFAS by zero-valent metals (ZVMs) is still inadequate. This study explores the effective defluorination of various branched PFASs using soluble porphyrin-ZVM systems and offers a systematic approach for designing the next generation of catalysts for PFAS remediation.

Suspect and nontarget screening of per- and polyfluoroalkyl substances based on ion mobility mass spectrometry and machine learning techniques

High-resolution mass spectrometry (HRMS)-based suspect and nontarget screening techniques are powerful tools for the comprehensive identification of per- and polyfluoroalkyl substances (PFASs), but the interference of complex matrices (especially for wastewater) pose an analytical challenge. This study explored the potential of combining ion mobility spectrometry (IMS) with HRMS and machine learning techniques to achieve the rapid and accurate suspect and nontarget screening of PFAS in wastewater. There were fewer interfering peaks and a clearer spectrum in the data acquired by IMS-HRMS than conventional HRMS. The introduction of collision cross section (CCS) in PFAS homologous series search could filter out 63% of false positive results. Retention time and CCS prediction models were helpful in improving the confidence for PFAS qualitative identification and the random forest algorithm combined with RDKit descriptor performed best for CCS prediction. With the inclusion of extra dimensional information, this study also proposed a comprehensive and concise confidence assignment criterion to better convey the certainty of the qualitative identification of PFAS. Finally, a total of 56 potential PFASs were identified in the wastewater sample using the newly developed method and 45 of them were identified outside reference standards, emphasizing the importance of suspect and nontarget screening for PFAS.

Application of Ion Mobility Spectrometry and the Derived Collision Cross Section in the Analysis of Environmental Organic Micropollutants

Ion mobility spectrometry (IMS) is a rapid gas-phase separation technique, which can distinguish ions on the basis of their size, shape, and charge. The IMS-derived collision cross section (CCS) can serve as additional identification evidence for the screening of environmental organic micropollutants (OMPs). In this work, we summarize the published experimental CCS values of environmental OMPs, introduce the current CCS prediction tools, summarize the use of IMS and CCS in the analysis of environmental OMPs, and finally discussed the benefits of IMS and CCS in environmental analysis. An up-to-date CCS compendium for environmental contaminants was produced by combining CCS databases and data sets of particular types of environmental OMPs, including pesticides, drugs, mycotoxins, steroids, plastic additives, per- and polyfluoroalkyl substances (PFAS), polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), and polybrominated diphenyl ethers (PBDEs), as well as their well-known transformation products. A total of 9407 experimental CCS values from 4170 OMPs were retrieved from 23 publications, which contain both drift tube CCS in nitrogen (DTCCSN2) and traveling wave CCS in nitrogen (TWCCSN2). A selection of publicly accessible and in-house CCS prediction tools were also investigated; the chemical space covered by the training set and the quality of CCS measurements seem to be vital factors affecting the CCS prediction accuracy. Then, the applications of IMS and the derived CCS in the screening of various OMPs were summarized, and the benefits of IMS and CCS, including increased peak capacity, the elimination of interfering ions, the separation of isomers, and the reduction of false positives and false negatives, were discussed in detail. With the improvement of the resolving power of IMS and enhancements of experimental CCS databases, the practicability of IMS in the analysis of environmental OMPs will continue to improve.

Analytical methods employed in the identification and quantification of per- and polyfluoroalkyl substances in human matrices - A scoping review

Persistent organic pollutants (POPs) represent a possible hazard for the ecosystems, with adverse outcomes on wildlife and humans. POPs have always received interest from the scientific community, and they have also been subject to legal restrictions worldwide on their application and commercialization. Among the broad spectrum of POPs, per- and polyfluoroalkyl substances (PFASs) are considered emerging contaminants due to their potential effect on the ecosystem and human health. These contaminants are widely employed in countless applications, from surfactants and building materials to food packaging. On the other hand, their chemical structure gives them the ability to interact with the environment, causing possible toxic effects for humans and environment. Human biomonitoring is a necessary instrument to indagate the impact of PFASs on human health: in recent years several studies have found detectable levels of PFASs in several biological matrices in humans (blood, hair, nails, and urine). Here, we review the most recent scientific literature concerning analytical methods employed in the identification and quantification of PFASs focusing on biological matrices. It has been noted that liquid chromatography coupled with mass spectrometry is the main analytical instrumentation employed, while blood and/or serum samples are the main employed human matrices whereas the use of non-invasive matrices is still at the beginning. Various issues directly related to human metabolism of PFASs and the effective amount of PFAS absorbed from the environment still need to be investigated.

Analytical approaches for screening of per- and poly fluoroalkyl substances in food items: A review of recent advances and improvements

Per and polyfluoroalkyl substances (PFAS) are a group of man-made chemicals characterized by their ubiquitous nature in all environmental compartments which makes them of increasing concern due to their persistence, bioaccumulation, and toxicity (PBT). Several instrumental methodologies and separation techniques have been identified in the literature for the detection and quantification of PFAS in environmental samples. In this review, we have identified and compared common separation techniques adopted for the extraction of PFAS in food items, and analytical methodologies for identification and quantification of PFAS in food items of plant and animal origin, highlighting recent advances in tandem techniques for the high selectivity and separation of PFAS related compounds as well as knowledge gaps and research needs on current analytical methodologies.

High-Definition Differential Ion Mobility Spectrometry with Structural Isotopic Shifts for Anionic Compounds

Differential ion mobility spectrometry (FAIMS) had emerged in the 2000s as a novel tool for postionization separations in conjunction with mass spectrometry (MS). High-definition FAIMS introduced a decade ago has enabled resolution of peptide, lipid, and other molecular isomers with minute structural variations and recently the isotopic shift analyses where the spectral pattern for stable isotopes fingerprints the ion geometry. Those studies, including all isotopic shift analyses, were in the positive mode. Here, we achieve the same high resolution for anions exemplified by phthalic acid isomers. The resolving power and magnitude of isotopic shifts are in line with the metrics for analogous haloaniline cations, establishing high-definition negative-mode FAIMS with structurally specific isotopic shifts. Different shifts (including the new ¹⁸O) remain additive and mutually orthogonal, demonstrating the generality of those properties across the elements and charge states. Expanding to common (not halogenated) organic compounds is a key step toward the broad use of FAIMS isotopic shift methodology.

Collision cross-section as a universal molecular descriptor in the analysis of PFAS and use of ion mobility spectrum filtering for improved analytical sensitivities

The massive usage of per- and polyfluoroalkyl substances (PFAS), as well as their high chemical stability, have led to their ubiquitous presence in environmental matrices and direct human exposure through contaminated food, particularly fish. In the analysis of this large group of substances, the use of ion mobility coupled to mass spectrometry is of particular relevance because it uses an additional descriptor, the collision cross-section (CCS), which results in increased selectivity. In the present work, the ^TWCCS_N2 of 24 priority PFAS were experimentally obtained, and the reproducibility of these measurements was evaluated over seven weeks. The average values were employed to critically assess previously reported data and theoretical calculations. This gain in selectivity made it possible to increase the sensitivity of the detection on complex matrices (biota, food and human serum) by using the drift time associated to each analyte as a filter, thus reducing the interferences and background noise and allowing their detection at trace levels.

Identification and characterization of diverse isomers of per- and polyfluoroalkyl substances in Chinese municipal wastewater

Linear and branched isomers of per- and polyfluoroalkyl substances (PFASs) are simultaneously present in the environment. However, isomer profiles of PFASs in municipal wastewater treatment plants (WWTPs) are still unknown because of the limitations of standards. Here, influent and effluent samples from 148 municipal WWTPs in China were collected. Ion mobility spectrometry was introduced into high-resolution mass spectrometry-based suspect screening methods to identify the target and suspect PFAS isomers. A total of 38 branched isomers of 14 typical PFASs were identified in wastewater samples. Linear PFASs had higher detection rates (22.3%-100%) than branched isomers (2.0%-98%). Compared to the influents, proportions of branched isomers of most PFASs (except for perfluoropentanoic acid and perfluorohexanoic acid) increased in the effluents. The conventional biological treatment processes (such as anaerobic-anoxic-aerobic and oxidation ditch treatments) had poor removal efficiency for linear PFASs (<21.4%) and branched isomers (<13.4%). No difference on removal efficiency among treatment processes was found. Furthermore, isomer composition in the WWTPs showed obvious differences between East China region and other regions, and the usage of short-chain PFASs (perfluorobutanesulfonic acid and perfluorohexanesulfonic acid) may be a key factor for driving this difference. This study sheds lights on the identification and characterization of PFAS isomers in WWTPs, which would be useful for development of monitoring and control strategies of PFASs.

Rapid discrimination of enantiomers by ion mobility mass spectrometry and chemical theoretical calculation: Chiral mandelic acid and its derivatives

Because R/S-mandelic acids (MA) and their derivatives are critical starting materials or intermediates in the synthesis of chiral drugs, their chirality discrimination is important. In this study, R/S-MA and its derivatives, including R/S-2-phenylpropionic acid (2-PPA), R/S-methoxyphenylaceticacid (MPA), and R/S-2-hydroxy-4-phenylbutyric acid (HPBA), were accurate simultaneous mobility-discriminated by forming diastereomer complexes for the first time, which were obtained by simply mixing with cyclodextrins (α, β, γ-CD) and transition-metal ions (Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, and Zn²⁺). The mass spectra revealed non-covalent diastereomer complexes formed by CD, enantiomers, and metal ions, and ion-mobility spectrometry (IMS) was performed for 109 pairs of complexes. Significant chiral discrimination was observed in the formed diastereomeric complexes, and their separation peak-to-peak resolution (R_p-p) for the enantiomers depended on the transition metal ion type. In most cases, the R_p-p value gradually increases with CD size, with quaternary complexes having the largest R_p-p value. The greatest chiral distinctions of 2-PPA, MA, MPA, and HPBA were obtained by the diastereomeric complex ions of [(2-PPA)(α)₂+Zn²⁺-H]⁺, [(MA)(α)₂+Zn²⁺-H]⁺, [(MPA)₂(β)+Co²⁺-H]⁺, and [(HPBA)(α)₂+Fe²⁺-H]⁺, with R_p-p values of 1.35, 1.57, 1.70, and 0.71, respectively. Furthermore, the favorable conformation and collisional cross section (CCS) value of the different [CD + R/S-MA + Cu-H]⁺ complexes were measured using chemical theoretical calculations to detail their intermolecular interaction, revealing that [α-CD + R/S-MA + Cu-H]⁺ has two favored gas complexes, and the CCS calculated were consistent with the TIMS observed. In addition, R² > 0.99 was obtained for the relative quantification of the chiral enantiomers. Overall, the proposed method provides a promising strategy for distinguishing the enantiomers of MA and their derivatives, with the advantages of simplicity, speed, and accuracy, without the need for complex chemical derivatization or chromatographic separation.

Analysis of Specific Perfluorohexane Sulfonate Isomers by Liquid Chromatography-Tandem Mass Spectrometry: Method Development and Application in Source Apportionment

Characterization of perfluorohexane sulfonate (PFHxS) isomers, a chemical proposed for listing under the Stockholm Convention, is important to elucidate its environmental behaviors and sources. Optimized chromatographic separation coupled with monitoring of the characteristic fragments enabled the identification of four mono-substituted and two di-substituted branched PFHxS isomers. The transitions of molecular ions m/z 399 to the fragments m/z 80 (n-), m/z 169 (iso-), m/z 319 (1m-), m/z 80 (2m-), and m/z 180 (3m-) were selected for quantifying the mono-substituted isomers. Method accuracy of the established LC-MS/MS was verified by comparing the results of technical products with those determined by ¹⁹F-nuclear magnetic resonance (NMR). The developed method was then used to quantify the isomeric compositions of PFHxS in the perfluorooctane sulfonate (PFOS) industrial products which contained PFHxS as an impurity, as well as in several kinds of water samples, with the limits of detection for all isomers in the range of 4 to 30 pg/L. For the first time, a liquid chromatography-tandem mass spectrometry method was established to separate and quantify the PFHxS isomers. The isomeric profiling of water samples suggested that PFHxS in the waters was mainly due to the direct contamination of PFHxS rather than from PFOS contamination.

Efficient Reductive Defluorination of Branched PFOS by Metal-Porphyrin Complexes

Vitamin B₁₂ (VB₁₂) has been reported to degrade PFOS in the presence of Ti^III citrate at 70 °C. Porphyrin-based catalysts have emerged as VB₁₂ analogues and have been successfully used in various fields of research due to their interesting structural and electronic properties. However, there is inadequate information on the use of these porphyrin-based metal complexes in the defluorination of PFOS. We have therefore explored a series of porphyrin-based metal complexes for the degradation of PFOS. Co^II-5,10,15,20-tetraphenyl-21H,23H-porphyrin (Co^II-TPP), Co^II-5,10,15,20-tetrakis(4-methoxyphenyl)-21H,23H-porphyrin (Co^II-M-TPP), and Co^III-M-TPP exhibited efficient reductive defluorination of the branched PFOS. Within 5-8 h, these compounds achieved the same level of PFOS defluorination as VB₁₂ achieved in 7-10 days. For branched isomers, the specific removal rate of the Co^II-TPP-Ti^III citrate system is 64-105 times higher than that for VB₁₂-Ti^III citrate. Moreover, the Co^II-TPP-Ti^III citrate system displayed efficient (51%) defluorination for the branched PFOS (br-PFOS) in 1 day even at room temperature (25 °C). The effects of the iron and cobalt metal centers, reaction pH, and several reductants (NaBH₄, nanosized zerovalent zinc (nZn⁰), and Ti^III citrate) were systematically investigated. Based on the analysis of the products and previously published reports, a new possible defluorination pathway of branched PFOS is also proposed.

An atmospheric pressure ion funnel with a slit entrance for enhancing signal and resolution in high resolution differential ion mobility mass spectrometry

Differential ion mobility (DMS) is a versatile ion separation method that is often integrated with mass spectrometry (MS). In DMS, extremely high electric fields are used such that ion mobility depends non-linearly on electric field and thus, ion separations can be more orthogonal to MS than lower field ion mobility-based methods. DMS can have sufficiently high resolution to be used for enantiomer analysis of small molecules and to separate protein ions with peak widths comparable to those obtained for peptides. However, the performance of high resolution DMS-MS can be limited owing to the substantial loss of ions (>10-fold) that can occur upon their transfer from atmospheric pressure (where DMS separation typically occurs) to vacuum through a narrow conductance limited inlet (e.g. capillary) to the MS. Here, results from simulated ion trajectory simulations suggest that in high resolution DMS most ions can be lost by 'crashing' onto the narrow capillary inlet after exiting the DMS separation channel. To enhance DMS sensitivity and resolving power, an integrated DMS-MS interface concept is reported that consists of a slit electrode and a 12-electrode atmospheric pressure ion funnel (APIF). By using an APIF with slit entrance, the simulated ion transmission efficiencies increase by up to 257% for singly charged ions ([DMMP + H]⁺, [tryptophan + H]⁺, and [(2-dodecanone)₂ + H]⁺) and by 209% for [ubiquitin + 12H]¹²⁺, without compromising resolving power. The use of APIF improves the ion focussing from the DMS exit to the MS capillary to improve sensitivity, and the slit ensures that ion dispersion in the analytically relevant direction perpendicular to the DMS electrodes is restricted to enhance resolution. By narrowing the slit of the DMS-Slit-APIF interface, the DMS resolving power can be increased further by at least 20%. Overall, these results indicate that the integrated DMS-Slit-APIF interface is promising for improving the sensitivity and resolution for many different types of DMS-MS experiments.

"Simultaneous targeted and non-targeted analysis of per- and polyfluoroalkyl substances in environmental samples by liquid chromatography-ion mobility-quadrupole time of flight-mass spectrometry and mass defect analysis"

Per- and polyfluoroalkyl substances (PFAS) represent a large group of synthetic organic compounds which exhibit unique properties and have been extensively used for consumer and industrial products, resulting in a widespread presence in the environment. Regulation requiring PFAS monitoring has been implemented worldwide due to their potential health and eco-toxicological effects. Targeted methods are commonly used to monitor between twenty to forty PFAS compounds, representing only a small fraction of the number of compounds that may be present. Consequently, there is an increasing interest in complementary non-targeted methods to screen and identify unknown PFAS compounds with the aim to improve knowledge and to generate more accurate models regarding their environmental mobility and persistence. This work details the development of a method that simultaneously provided targeted and non-targeted PFAS analysis. Ultra-high performance liquid chromatography (UHPLC) was coupled to ion mobility-quadrupole time of flight-mass spectrometry (IMS-QTOF-MS) and used to quantify known and screen unknown PFAS in environmental samples collected within the greater Sydney basin (Australia). The method was validated for the quantification of 14 sulfonate-based PFAS, and a non-targeted data analysis workflow was developed using a combination of mass defect analysis with common fragment and neutral loss filtering to identify fluorine-containing species. The optimised method was applied to the environmental samples and enabled the determination of 3-7 compounds from the targeted list and the detection of a further 56-107 untargeted PFAS. This simultaneous analysis reduces the complexity of multiple analyses, and allows for greater interrogation of the full PFAS load in environmental samples.

Unsaturated PFOS and Other PFASs in Human Serum and Drinking Water from an AFFF-Impacted Community

Understanding how exposure to aqueous film-forming foam (AFFF)-impacted drinking water translates to bioaccumulation of per- and polyfluoroalkyl substances (PFASs) is essential to assess health risks. To investigate spatial variability of PFAS exposure in communities near an AFFF source zone, blood serum was collected in 2018 from 220 adult residents of El Paso County (Colorado), as were raw water samples from several wells. C6 and C8 perfluoroalkyl sulfonates (PFSAs) were predominant in serum and water. PFASs were most elevated in the water district nearest the source zone (median ∑PFSA of 618 ng/L in water and 33 ng/mL in serum). A novel PFAS, unsaturated perfluorooctane sulfonate, was detected in >80% of water and serum samples at low concentrations (≤1.9 ng/mL in serum). Drinking water wells nearest the source zone displayed increased prevalence of perfluoroalkyl sulfonamide precursors not detected in serum. Serum-to-water ratios were the greatest for long-chain PFASs and were elevated in the least impacted water district. Additional serum samples collected from a subset of study participants in June 2019 showed that PFAS concentrations in serum declined after exposure ceased, although declines for perfluoropentane sulfonate were minimal. Our findings demonstrate that AFFF-impacted communities are exposed to complex, spatially variable mixtures of PFASs.

Rapid, low-cost, and in-situ analysis of per- and polyfluoroalkyl substances in soils and sediments by ambient 3D-printed cone spray ionization mass spectrometry

A rapid method to empirically determine the presence of trace per- and polyfluoroalkyl substances (PFAS) in solid media, such as soils, sands, and sediments, without any sample preparation, through ambient ionization mass spectrometry (MS), is described. 3D-printed cone spray ionization (3D-PCSI) is an ambient ionization technique that employs a 3D-printed conductive plastic cone to perform both sampling and ionization. The 3D-PCSI sources are fabricated in the shape of a hollowed square pyramid to hold bulk matrices, and consist of rigid walls to aid in the uniformity and consistency of sampling and ionization. Solid samples are placed within the hollowed pyramid and a solvent is added to perform an in-situ extraction, followed by spray-based ionization when a voltage is applied. The low cost of 3D-printing, its reproducibility at scale, and lack of sample preparation, enables 3D-PCSI-MS to rapidly and efficiently screen for trace PFAS, in-situ, in bulk samples. Demonstrated here is the detection of trace PFAS that were doped into six different soil and sediment matrices, by 3D-PCSI-MS, to validate the universality of the method, irrespective of matrix composition. All PFAS were identified by their indicative MS³ spectra and ranged in detection limits from 100 ppt to 10 ppb depending on the compound and soil classification. Legacy aqueous film forming foams (AFFF) were analyzed in soil by 3D-PCSI-MS, as were soil samples collected around an AFFF testing facility. The sampling rate for 3D-PCSI-MS was less than 2 min per sample, demonstrating the applicability to high-throughput mapping of a contaminated area.

Ion Mobility-High-Resolution Mass Spectrometry (IM-HRMS) for the Analysis of Contaminants of Emerging Concern (CECs): Database Compilation and Application to Urine Samples

Ion mobility mass spectrometry (IM-MS)-derived collision cross section (CCS) values can serve as a valuable additional identification parameter within the analysis of compounds of emerging concern (CEC) in human matrices. This study introduces the first comprehensive database of ^DTCCS_N2 values of 148 CECs and their metabolites including bisphenols, alternative plasticizers (AP), organophosphate flame retardants (OP), perfluoroalkyl chemicals (PFAS), and others. A total of 311 ions were included in the database, whereby the ^DTCCS_N2 values for 113 compounds are reported for the first time. For 105 compounds, more than one ion is reported. Moreover, the ^DTCCS_N2 values of several isomeric CECs and their metabolites are reported to allow a distinction between isomers. Comprehensive quality assurance guidelines were implemented in the workflow of acquiring ^DTCCS_N2 values to ensure reproducible experimental conditions. The reliability and reproducibility of the complied database were investigated by analyzing pooled human urine spiked with 30 AP and OP metabolites at two concentration levels. For all investigated metabolites, the ^DTCCS_N2 values measured in urine showed a percent error of <1% in comparison to database values. ^DTCCS_N2 values of OP metabolites showed an average percent error of 0.12% (50 ng/mL in urine) and 0.15% (20 ng/mL in urine). For AP metabolites, these values were 0.10 and 0.09%, respectively. These results show that the provided database can be of great value for enhanced identification of CECs in environmental and human matrices, which can advance future suspect screening studies on CECs.

Resolving unknown isomers of emerging per- and polyfluoroalkyl substances (PFASs) in environmental samples using COSMO-RS-derived retention factor and mass fragmentation patterns

Chromatographic retention factors (k) and mass spectral fragmentation patterns of per- and polyfluoroalkyl substances (PFASs) were determined using the optimized parameters in liquid chromatography with tandem high-resolution mass spectrometry (LC-HRMS) analysis. Characteristic fragment ions obtained at various collision energies (MS² fragmentation) were used to determine the structures of newly discovered (emerging) PFASs detected from industrial effluent and surface water samples. Moreover, COnductor-like Screening MOdel for Realistic Solvents (COSMO-RS) derived octanol-water partition coefficients (K_ow), along with mean isotropic polarizabilities calculated from Density Functional Theory (DFT), of known PFASs were plotted against their experimental k values (k_exp) to obtain a multivariable regression model that can be used to predict k values of unknown PFASs. The k values of different structural isomers of unknown PFASs were calculated and compared to k_exp. The predicted k value for the isomer that matches the MS² fragmentation observed was found to be within 4.2 % of k_exp. This study demonstrates the applicability of an approach that combines the observed MS² fragmentation patterns and k values, together with computationally-derived log K_ow and polarizabilities, in assigning the structures of unknown PFASs at environmentally relevant conditions when no reference standards are available.

Data-independent acquisition with ion mobility mass spectrometry for suspect screening of per- and polyfluoroalkyl substances in environmental water samples

Per- and polyfluoroalkyl substances (PFASs) have environmentally persistent, and the various types of PFASs have been detected in water environments. Many previous studies have performed data-dependent acquisition (DDA) of mass spectra from an environmental sample by high-resolution mass spectrometry to identify PFAS suspects individually. In comparison, the data-independent acquisition (DIA) of comprehensive mass spectra of the sample is a technology which enables to know the occurrences of suspects and non-targets simultaneously. However, it is difficult to associate the fragment ions of targeted precursor ions by retention time only, because of the existence of co-eluting ions derived from environmental samples. Since the separation of ions is not enough with only the conventional DIA method, here, we attempted to support it using ion mobility mass spectrometry (IMS) to distinguish the relevant ions from co-eluting ions by drift time. Firstly, suspect screening of PFASs with eternal database resulted in determining 32-96 PFAS suspects in firefighting foam impacted groundwater samples (n = 8) by suspect screening. Among all the pairs of respective precursor ions and fragment ions of the PFAS suspects, 5%-19% (4-9 PFASs) of them were associated without considering the drift time of IMS, while 37%-49% (15-43 PFASs) of them were associated with considering the drift time. The consideration of the drift time increased the association ratios in all samples. In a sample, most precursor ions could be associated with their fragment ions (41 of 43 PFASs) because at least one probable fragment ion was observed among three of maximum intensity fragment ions. Thus, the method improved the identification by excluding the unrelated co-eluting ions by IMS. Moreover, the method can acquire a certain reliable MS/MS spectra of suspects in environmental samples in one analysis. It is not essential to conduct instrumental analyses again for samples stored for a long time even when the data sets and/or methodologies of data analyses are modified (e.g., the original database, screening list, or statistical filtering/data cleaning approach). It will be particularly useful for studies that must analyze a large number of environmental samples.

Rapid Characterization of Emerging Per- and Polyfluoroalkyl Substances in Aqueous Film-Forming Foams Using Ion Mobility Spectrometry-Mass Spectrometry

Aqueous film-forming foams (AFFF) are mixtures formulated with numerous hydrocarbon- and fluoro-containing surfactants. AFFF use leads to environmental releases of unknown per- and polyfluoroalkyl substances (PFAS). AFFF composition is seldom disclosed, and their use elicits concerns from both regulatory agencies and the public because PFAS are persistent in the environment and potentially associated with adverse health effects. In this study, we demonstrate the use of coupled liquid chromatography, ion mobility spectrometry, and mass spectrometry (LC-IMS-MS) to rapidly characterize both known and unknown PFAS in AFFF. Ten AFFF formulations from seven brands were analyzed using LC-IMS-MS in both negative and positive ion modes. Untargeted analysis of the formulations was followed by feature identification of PFAS-like features utilizing database matching, mass defect and homologous series evaluation, and MS/MS fragmentation experiments. Across the tested AFFF formulations, we identified 33 homologous series; only ten of these homologous series have been previously reported. Among tested AFFF, the FireStopper (n = 85) contained the greatest number of PFAS-like features and Phos-Check contained zero. This work demonstrates that LC-IMS-MS-enabled untargeted analysis of complex formulations, followed by feature identification using data-processing algorithms, can be used for rapid exposure characterization of known and putative PFAS during fire suppression-related contamination events.

Distribution and effects of branched versus linear isomers of PFOA, PFOS, and PFHxS: A review of recent literature

Perfluorinated alkyl substances (PFAS) have come to attention recently due to their widespread presence in the environment, recalcitrance, and potential negative health associations. Because of the long-term production of PFAS using ECF, which created branched isomers as byproducts in addition to the intended linear product, branched isomers of PFAS account for a significant portion of PFAS load in the environment. The distribution of isomers is not consistent in the environment, however. Geographic location appears to be a major factor in determining the isomer makeup of PFAS in surface and groundwater as well as in humans and animals. This is largely to differences in production methods; a region that produced PFAS via ECF for many years would have a higher ratio of branched isomers than one that produces PFAS using telomerization. In addition, the different structures of branched PFAS isomers as compared to linear PFAS appear to affect transport in the environment. Research suggests that linear PFAS sorb preferentially to soil and sediments, whereas branched isomers are more likely to remain in water. The higher polarity of the branched structure explains this difference. Studies in humans and animals show that most animals preferentially accumulate the linear PFOS isomer, but humans appear to preferentially accumulate the branched isomers as they are often found in human serum at percentages higher than that of ECF product. In addition, some studies have indicated that linear and branched PFAS isomers have some unique negative health associations. Very few studies, however, account for linear and branched PFAS separately.

Nanosecond Pulsed Dielectric Barrier Discharge Ionization Mass Spectrometry

Dielectric barrier discharge ionization (DBDI) is an emerging technique for ionizing volatile molecules directly from complex mixtures for sensitive detection by mass spectrometry (MS). In conventional DBDI, a high frequency and high voltage waveform with pulse widths of ∼50 μs (and ∼50 μs between pulses) is applied across a dielectric barrier and a gas to generate "low temperature plasma." Although such a source has the advantages of being compact, economical, robust, and sensitive, background ions from the ambient environment can be formed in high abundances, which limits performance. Here, we demonstrate that high voltage pulse widths as narrow as 100 ns with a pulse-to-pulse delay of ∼900 μs can significantly reduce background chemical noise and increase ion signal. Compared to microsecond pulses, ∼800 ns pulses can be used to increase the signal-to-noise and signal-to-background chemical noise ratios in DBDI-MS by up to 172% and 1300% for six analytes, including dimethyl methylphosphonate (DMMP), 3-octanone, and perfluorooctanoic acid. Using nanosecond pulses, the detection limit for DMMP and PFOA in human blood plasma can be lowered by more than a factor of 2 in comparison to microsecond pulses. In "nanopulsed" plasma ionization, the extent of internal energy deposition is as low as or lower than in electrospray ionization and micropulsed plasma ionization based on thermometer ion measurements. Overall, nanosecond high-voltage pulsing can be used to significantly improve the performance of DBDI-MS and potentially other ion sources involving high voltage waveforms.

Rapid Characterization of Per- and Polyfluoroalkyl Substances (PFAS) by Ion Mobility Spectrometry-Mass Spectrometry (IMS-MS)

Per- and polyfluoroalkyl substances (PFAS) are an ensemble of persistent organic pollutants of global interest because of their associations with adverse health outcomes. Currently, environmental PFAS pollution is prolific as a result of the widespread manufacturing of these compounds and their chemical persistence. In this work, we demonstrate the advantages of adding ion mobility spectrometry (IMS) separation to existing LC-MS workflows for PFAS analysis. Using a commercially available drift tube IMS-MS, we characterized PFAS species and isomeric content in both analytical standards and environmental water samples. Molecular trendlines based on intrinsic mass and structural relationships were also explored for individual PFAS subclasses (e.g. PFSA, PFCA, etc.). Results from rapid IMS-MS analyses provided a link between mass and collision cross sections (CCS) for specific PFAS families and are linked to compositional differences in molecular structure. In addition, CCS values provide additional confidence of annotating prioritized features in untargeted screening studies for potential environmental pollutants. Results from this study show that the IMS separation provides novel information to support traditional LC-MS PFAS analyses and will greatly benefit the evaluation of unknown pollutants in future environmental studies.

Analysis of mobile chemicals in the aquatic environment-current capabilities, limitations and future perspectives

Persistent and mobile water contaminants are rapidly developing into a focal point of environmental chemistry and chemical regulation. Their defining parameter that sets them apart from the majority of regularly monitored and regulated contaminants is their mobility in the aquatic environment, which is intrinsically tied to a high polarity. This high polarity, however, may have severe implications in the analytical process and thus the most polar of these mobile contaminants may not be covered by widely utilized trace-analytical methods, and thus, alternatives are required. In this review, we infer the physical and chemical properties of mobile water contaminants from a set of almost 1800 prioritized REACH chemicals and discuss the implications these substance properties may have on four integral steps of the analytical process: sampling and sample storage, sample pre-treatment, separation and detection. We discuss alternatives to widely utilized trace-analytical methods, examine their application range and limitations, highlight potential analytical techniques on the horizon and emphasize research areas we believe still offer the most room for further improvement. While we have a comprehensive set of analytical methods to cover a large portion of the known mobile chemicals, these methods are still only infrequently utilized. Graphical abstract.

Characterization of polymeric phenolic acids and flavonoids in Clerodendranthi Spicati Herba using ultrahigh-performance liquid chromatography coupled to quadrupole time-of-flight tandem mass spectrometry with target and nontarget data mining strategy

RATIONALE

Clerodendranthi Spicati Herba (CSH) is often used to treat urinary stones, urinary tract infections and nephritis in China. Much literature has reported that polymeric phenolic acids and flavonoids are the major bioactive components in CSH. Therefore, it is very meaningful to identify the polymeric phenolic acids and flavonoids in CSH.

METHODS

Ultrahigh-performance liquid chromatography coupled to quadrupole time-of-flight tandem mass spectrometry (UHPLC/QTOF-MS/MS) analysis with target and nontarget data mining strategy was proposed to rapidly profile the polymeric phenolic acids and flavonoids in CSH. Diagnostic product ions and neutral loss filter were beneficial for identifying the polymeric phenolic acids and flavonoids from complex compounds in CSH.

RESULTS

A total of 118 compounds, including 85 polymeric phenolic acids and 33 flavonoids, were reasonably identified in CSH by comparing their main fragmentation pathways with literature data, and 85 of them were discovered in CSH firstly by nontarget analysis. Nine potential compounds were characterized tentatively as new pentameric and hexameric phenolic acids in CSH. Six types of polymeric phenolic acids (monomer, dimer, trimer, tetramer, pentamer and hexamer) and four types of flavonoids (apigenin, kaempferol, luteolin and quercetin) were identified in CSH.

CONCLUSIONS

The results indicated that the UHPLC/QTOF-MS/MS method coupled with target and nontarget data mining strategy was feasible and rational for identifying the polymeric phenolic acids and flavonoids in complex chemical constituents of CSH. The findings will be conducive to the discovery of the active ingredients of CSH and the establishment of quality standards.

Ion Mobility Spectrometry in Food Analysis: Principles, Current Applications and Future Trends

In the last decade, ion mobility spectrometry (IMS) has reemerged as an analytical separation technique, especially due to the commercialization of ion mobility mass spectrometers. Its applicability has been extended beyond classical applications such as the determination of chemical warfare agents and nowadays it is widely used for the characterization of biomolecules (e.g., proteins, glycans, lipids, etc.) and, more recently, of small molecules (e.g., metabolites, xenobiotics, etc.). Following this trend, the interest in this technique is growing among researchers from different fields including food science. Several advantages are attributed to IMS when integrated in traditional liquid chromatography (LC) and gas chromatography (GC) mass spectrometry (MS) workflows: (1) it improves method selectivity by providing an additional separation dimension that allows the separation of isobaric and isomeric compounds; (2) it increases method sensitivity by isolating the compounds of interest from background noise; (3) and it provides complementary information to mass spectra and retention time, the so-called collision cross section (CCS), so compounds can be identified with more confidence, either in targeted or non-targeted approaches. In this context, the number of applications focused on food analysis has increased exponentially in the last few years. This review provides an overview of the current status of IMS technology and its applicability in different areas of food analysis (i.e., food composition, process control, authentication, adulteration and safety).