Scanning electrochemical microscopy with conducting polymer probes: Validation and applications

A review of innovative electrochemical strategies for bioactive molecule detection and cell imaging: Current advances and challenges

Cellular heterogeneity poses a major challenge for tumor theranostics, requiring high-resolution intercellular bioanalysis strategies. Over the past decades, the advantages of electrochemical analysis, such as high sensitivity, good spatio-temporal resolution, and ease of use, have made it the preferred method to uncover cellular differences. To inspire more creative research, herein, we highlight seminal works in electrochemical techniques for biomolecule analysis and bioimaging. Specifically, micro/nano-electrode-based electrochemical techniques enable real-time quantitative analysis of electroactive substances relevant to life processes in the micro-nanostructure of cells and tissues. Nanopore-based technique plays a vital role in biosensing by utilizing nanoscale pores to achieve high-precision detection and analysis of biomolecules with exceptional sensitivity and single-molecule resolution. Electrochemiluminescence (ECL) technology is utilized for real-time monitoring of the behavior and features of individual cancer cells, enabling observation of their dynamic processes due to its capability of providing high-resolution and highly sensitive bioimaging of cells. Particularly, scanning electrochemical microscopy (SECM) and scanning ion conductance microscopy (SICM) which are widely used in real-time observation of cell surface biological processes and three-dimensional imaging of micro-nano structures, such as metabolic activity, ion channel activity, and cell morphology are introduced in this review. Furthermore, the expansion of the scope of cellular electrochemistry research by innovative functionalized electrodes and electrochemical imaging models and strategies to address future challenges and potential applications is also discussed in this review.

An isolated single-particle-based SECM tip interface for single-cell NO sensing

As a key factor in cellular metabolic processes, nitric oxide (NO) is a challenging target for in situ real-time monitoring due to its transient property and short diffusion distance. Scanning electrochemical microscopy (SECM) has unique advantages in single-cell analysis, which can obtain the electrochemical current by scanning the cell surface with a tip microelectrode. In particular, it can further improved the electrochemical response by enhancing the interface properties of its tip. Here, an interface design strategy based on platinum single nanoparticle (Pt NP) was developed, and fluorinated self-assembled monolayers (SAMs) were used to further improve its performance. This modified tip was used as an SECM probe for NO concentration monitoring and morphological imaging of single MCF-7 cells. It has the high sensitivity (164.7 μA/μM·cm²) and good selectivity for NO detection, which benefits from the efficient catalytic properties of Pt NPs and high mass transport and hydrophobic antifouling properties of the interface. Notably, it shows a superior performance in detecting the fluctuation of NO released by a single MCF-7-cell under the stimulation of cadmium (Cd), which demonstrates a promising method for using a single-particle-based tip in SECM applications.

Uses of Scanning Electrochemical Microscopy (SECM) for the Characterization with Spatial and Chemical Resolution of Thin Surface Layers and Coating Systems Applied on Metals: A Review

Scanning Electrochemical Microscopy (SECM) is increasingly used in the study and characterization of thin surface films as well as organic and inorganic coatings applied on metals for the collection of spatially- and chemically-resolved information on the localized reactions related to material degradation processes. The movement of a microelectrode (ME) in close proximity to the interface under study allows the application of various experimental procedures that can be classified into amperometric and potentiometric operations depending on either sensing faradaic currents or concentration distributions resulting from the corrosion process. Quantitative analysis can be performed using the ME signal, thus revealing different sample properties and/or the influence of the environment and experimental variables that can be observed on different length scales. In this way, identification of the earlier stages for localized corrosion initiation, the adsorption and formation of inhibitor layers, monitoring of water and specific ions uptake by intact polymeric coatings applied on metals for corrosion protection as well as lixiviation, and detection of coating swelling—which constitutes the earlier stages of blistering—have been successfully achieved. Unfortunately, despite these successful applications of SECM for the characterization of surface layers and coating systems applied on metallic materials, we often find in the scientific literature insufficient or even inadequate description of experimental conditions related to the reliability and reproducibility of SECM data for validation. This review focuses specifically on these features as a continuation of a previous review describing the applications of SECM in this field.

Controllable release of dopamine from simulated enzyme-containing biomembrane by biased potential

Controllable release of dopamine (DA) is worth studying for its significant in physiological metabolic process. β-cyclodextrin/11-mercaptoundecanoic acid self-assembled monolayer (β-CD/MUA SAM) based on hydrogen bonds network was constructed as simulated enzyme-containing biomembrane. DA interacted with β-CD based on intermolecular hydrogen bond and formed inclusion complexes in SAM, namely DA@β-CD/MUA SAM. The desorption process of DA from DA@β-CD/MUA SAM revealed the release behavior of DA from enzyme-containing biomembrane at molecular level. Positive biased potential as external stimulus was applied at DA@β-CD/MUA SAM, reducing the negative charge density of SAM. The decrease of negative charge density of SAM resulted in the weakening of hydrogen bond between DA and β-CD, which in turn caused DA to be released. Using scanning electrochemical microscopy, positive biased potential not only had specificity induction for the release of DA, but also was able to monitor the release quantitatively in real time. These results showed that positive biased potential as external stimulus was favorable for the controllable release of DA, suggesting the possible application of biased potential in controllable regulation field.

Coordinated mapping of Li+ flux and electron transfer reactivity during solid-electrolyte interphase formation at a graphene electrode

Interphases formed at battery electrodes are key to enabling energy dense charge storage by acting as protection layers and gatekeeping ion flux into and out of the electrodes. However, our current understanding of these structures and how to control their properties is still limited due to their heterogenous structure, dynamic nature, and lack of analytical techniques to probe their electronic and ionic properties in situ. In this study, we used a multi-functional scanning electrochemical microscopy (SECM) technique based on an amperometric ion-selective mercury disc-well (HgDW) probe for spatially-resolving changes in interfacial Li⁺ during solid electrolyte interphase (SEI) formation and for tracking its relationship to the electronic passivation of the interphase. We focused on multi-layer graphene (MLG) as a model graphitic system and developed a method for ion-flux mapping based on pulsing the substrate at multiple potentials with distinct behavior (e.g. insertion-deinsertion). By using a pulsed protocol, we captured the localized uptake of Li⁺ at the forming SEI and during intercalation, creating activity maps along the edge of the MLG electrode. On the other hand, a redox probe showed passivation by the interphase at the same locations, thus enabling correlations between ion and electron transfer. Our analytical method provided direct insight into the interphase formation process and could be used for evaluating dynamic interfacial phenomena and improving future energy storage technologies.