Magnetic graphitic carbon nitride nano-composite for ultrasound-assisted dispersive micro-solid-phase extraction of Hg(II) prior to quantitation by atomic fluorescence spectroscopy

Chromoionophoric molecular probe infused bimodal porous polymer rostrum as solid-state ocular sensor for the selective and expeditious optical sensing of ultra-trace toxic mercury ions

This study presents a distinctive solid-state naked-eye colorimetric sensing approach by encapsulating a chromoionophoric probe onto a hybrid macro-/meso-pore polymer scaffold for fast and selective sensing of ultra-trace Hg(II). The customized structural/surface properties of the poly(VPy-co-TM) monolith are attained by specific proportions of 2-vinylpyridine (VPy), trimethylolpropane trimethacrylate (TM), and pore-tuning solvents. The interconnected porous network of poly(VPy-co-TM), inherent superior surface area and porosity, is captivating for the homogeneous/voluminous incorporation of probe molecules, i.e., 7-((4-methoxyphenyl)diazenyl)quinoline-8-ol (MPDQ), for the target-specific colorimetric detection. The structural morphology, surface topography, and phase characteristics of the bare poly(VPy-co-TM) monolith and MPDQ@poly(VPy-co-TM) sensor are examined using HR-TEM-SAED (High-Resolution Transmission Electron Microscopy - Selected Area Electron Diffraction), FE-SEM-EDAX (Field Emission Scanning Electron Microscopy - Energy Dispersive X-ray Spectroscopy), XPS (X-ray Photoelectron Spectroscopy), p-XRD (Powder X-Ray Diffraction), FT-IR (Fourier Transform Infrared Spectroscopy), UV-Vis-DRS (Ultraviolet-Visible Diffuse Reflectance Spectroscopy), and BET/BJH (Brunauer-Emmett-Teller / Barrett-Joyner-Halenda) analysis. The distinctive properties of the sensor reveal a constrained geometrical orientation of the MPDQ probe onto the long-range continuous monolithic network of meso-/-macropore template, enabling selective interaction with Hg(II) with peculiar color transfiguration from pale yellow to deep brown. The sensor demonstrates a linear spectral-color alliance in the 0-200 ppb concentration range for Hg(II), with quantification and detection limits of 0.63 and 0.19 ppb. The sensor efficacy is verified using certified contaminated water and tobacco samples, with excellent reusability, reliability, and reproducibility of ≥ 99.23 % (RSD ≤1.89 %) and ≥ 99.19 % (RSD ≤1.94 %) of Hg(II), respectively.

Aminothiol supported dialdehyde cellulose for efficient and selective removal of Hg(II) from aquatic solutions

The increasingly serious problem of mercury pollution has caused wide concern, and exploring adsorbent materials with high adsorption capacity is a simple and effective approach to address this concern. In the recent study, dialdehyde cellulose (DAC), cyanoacetohydrazide (CAH), and carbon disulfide (CS2) are used as raw materials for the (DAC@CAH@SK2) preparation material through the three-steps method. By utilizing the following characterization techniques; thermogravimetric analysis (TGA), N2 adsorption-desorption isotherm (BET), elemental analysis, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD), 1HNMR and Energy Dispersive X-ray Spectroscopy (EDS) of DAC@CAH@SK2 composite. The point of zero charge (pHPZC) for the prepared DAC@CAH@SK2 also was examined. From the batch experiments, the optimum conditions were found to be pH (5-8), an Hg2+ concentration of 150 mg/L, a DAC@CAH@SK2 dose of 0.01 g, and a contact time of 180 min with a maximum adsorption quantity of 139.6 mg/g. The process of Hg2+ adsorption on the DAC@CAH@SK2 material was spontaneous exothermic, monolayer chemisorption, and well-fitted to Langmuir and pseudo-2nd-order models. The DAC@CAH@SK2 selectivity towards the Hg2+ was examined by investigating the interfering metal ions effect. The DAC@CAH@SK2 was successfully applied for the Hg2+ removal from synthetic effluents and real wastewater samples with a recovery % exceeding 95%. The prepared DAC@CAH@SK2 was regenerated using a mixture of EDTA and thiourea. Also, FT-IR analysis indicates that the synergistic complexation of N and S atoms on DAC@CAH@SK2 with Hg(II) is an essential factor leading to the high adsorption capacity.

Single-vial preconcentration and cold vapor generation for the determination of Hg(II) in water samples of different salinities

In this work, a single-vial methodology for the extraction and cold vapor generation of mercury(II) was developed, followed by the determination of the analyte by atomic absorption spectrometry, with application in water samples of different salinities. L-cystine-modified Fe3O4 nanoparticles (2LcysMNP) were used as sorbent material in the magnetic solid phase extraction (MSPE) in the same flask in which the mercury vapor generation step was performed using a handmade gas-liquid separator developed in our laboratory. The main conditions for extraction, pre-concentration, and cold vapor generation of mercury were optimized. Under the optimized conditions, detection and quantification limits of 0.04 and 0.12 μg L-1, respectively, were achieved with a relative standard deviation of 7.5%. The single-vial system allowed for a preconcentration factor of 30 and an enrichment factor of 24. The accuracy of the method was evaluated by applying it to certified reference materials, and the obtained values were not significantly different from the expected values according to the Student's t-test. Verification of non-specific interferences was assessed by recovery tests, resulting in recoveries ranging from 81 to 111% for water samples of different salinities.

Miniaturized on-chip electromembrane extraction with QR code-based red-green-blue analysis using a customized Android application for copper determination in environmental and food samples

A miniaturized on-chip electromembrane extraction device with QR code-based red-green-blue analysis was designed to determine copper in water, food, and soil. The acceptor droplet consisted of ascorbic acid as the reducing agent and bathocuproine as the chromogenic reagent. The formation of a yellowish-orange complex was a sign of copper in the sample. Then, the qualitative and quantitative analysis of the dried acceptor droplet was done by the customized Android app that was developed based on image analysis concepts. In this application, principal component analysis was performed on the data for the first time to reduce the three dimensions, red, green, and blue, to one dimension. The effective extraction parameters were optimized. The limit of detection and limit of quantification were 0.1 µg mL^-1. Intra- and inter-assay relative standard deviations ranged between 2.0 and 2.3 % and 3.1-3.7 %, respectively. The calibration range was studied between 0.1 and 25 µg mL^-1 (R² = 0.9814).

Determination of lead in Gentiana rigescens and evaluation of the effect of lead exposure on the liver protection of the natural medicine

In this work, ultrasound-assisted rapidly synergistic cloud point extraction (UARS-CPE) and inductively coupled plasma optical emission spectrometry (ICP-OES) were combined to determine trace Pb in Gentiana rigescens Franch. ex Hemsl. (G. rigescens) samples. Under the optimal conditions, the enhancement factor (EF), limit of detection (LOD), limit of quantitation (LOQ) and precision were 33, 0.11 μg L^-1, 0.37 μg L^-1 and 1.3%, respectively. This method was applied to the analysis of G. rigescens samples, and the outcomes were in good agreement with the results determined by inductively coupled plasma mass spectrometry (ICP-MS). A mice model of immune liver injury induced by concanavalin A (ConA) was established, and the liver protection of G. rigescens and gentiopicroside (GPS) on it and the effects of various dosages of Pb exposure on its liver protection were studied. Pb at a dosage of 5 mg kg^-1 had little effect on the liver protection of G. rigescens and GPS, while 25, 125 mg kg^-1 dosages of Pb could significantly attenuate the liver protection of both. In addition, it aggravated the necrosis of hepatocytes and inflammatory cell infiltration, and these effects were dose-dependent.

Ultrasonic assisted magnetic solid phase extraction of ultra-trace mercury with ionic liquid functionalized materials

Due to the agglomeration between particles, the inherent adsorption characteristics of magnetic powder materials are usually difficult to fully display. Taking ionic liquid functional materials as an example, the enrichment behavior of these adsorbents for trace mercury (Hg²⁺) in ultrasonic (US) assisted dispersion mode was systematically studied. The dissociation of protonic ionic liquids (IL) occur in the process of dispersion and the strong electrostatic attraction can improve the diffusion and adhesion of mercury on the adsorbent surface. Spectral measurement data showed that with the help of US, the more uniform dispersion of magnetic materials accelerated the adsorption of trace Hg²⁺. Ultrasonic intrinsic parameters such as frequency, power and radiation duration significantly affect the dispersion and apparent adsorption properties of magnetic functional materials. In the range of experimental parameters, the dye/paper image experimental results documents that there is a positive correlation between cavitation effect and ultrasonic frequency/power. The enrichment degree of fixed adsorbate (0.1 μg L^-1) under high frequency (59 kHz) or high-power input (100%) is 1-2 times higher than that under low frequency (40 kHz) or low power (60%) input. This is a valuable conclusion for the subsequent study of US dispersion of magnetic and even non-magnetic powder materials. In addition, the in-situ desorption and accurate measurement of adsorbed mercury were realized by combining slurry vapor generation atomic fluorescence spectroscopy (SVG-AFS). The constructed US assisted magnetic solid phase extraction (US-MSPE) method has the characteristics of low detection limit (0.36 ng L^-1), high recovery (>90%), sustainable utilization (>3) and reasonable measurement deviation (<5%), which can meet the requirements of ultra-trace Hg²⁺ (0.01-1.0 μg L^-1).

Tetrakis(4-pyridylphenyl)ethylene-based Zinc Metal-Organic Framework with Aggregation-Induced Chemiluminescence Emission on a Paper Platform for Formaldehyde Detection in Breath

Volatile formaldehyde (FA) in exhaled breath (EB) is considered as a biomarker for lung cancer (LC). On-the-spot selective and sensitive detection of gaseous FA is rather important for LC screening and diagnosis. Herein, a tetrakis(4-pyridylphenyl)ethylene (Py-TPE)-based zinc metal-organic framework (MOF) with excellent aggregation-induced emission (AIE) property was utilized for absorption and selective detection of FA in EB. The porous Zn-Py-TPE served as a gaseous confinement cavity for the adsorption of FA in EB. Interestingly, Zn-Py-TPE was aggregated on paper, and then aggregation-induced chemiluminescence (CL) emission can be triggered by only adding bis(2,4,6-trichlorophenyl)oxalate (TCPO). Though without H₂O₂, the CL of Zn-Py-TPE-TCPO was enhanced greatly by FA. FA promoted the aggregation of Zn-Py-TPE on paper by forming halogen bonding between FA and Zn-Py-TPE, which contributed to the better selectivity. FA can also stimulate the production of more singlet oxygen (¹O₂) in the Zn-Py-TPE-TCPO CL system. Hence, FA could be detected via the proposed Zn-Py-TPE-TCPO system with a quantification linear range of 1.0-100.0 ppb and detection limit of 0.3 ppb. This portable, low-cost, and sensitive paper-based platform can achieve trace FA detection in EB and is expected to provide an on-the-spot screening platform for lung cancer.

Determination of Hg(II) and Methylmercury by Electrothermal Atomic Absorption Spectrometry after Dispersive Solid-Phase Microextraction with a Graphene Oxide Magnetic Material

The toxicity of all species of mercury makes it necessary to implement analytical procedures capable of quantifying the different forms this element presents in the environment, even at very low concentrations. In addition, due to the assorted environmental and health consequences caused by each mercury species, it is desirable that the procedures are able to distinguish these forms. In nature, mercury is mainly found as Hg⁰, Hg²⁺ and methylmercury (MeHg), with the latter being rapidly assimilated by living organisms in the aquatic environment and biomagnified through the food chain. In this work, a dispersive solid-phase microextraction of Hg²⁺ and MeHg is proposed using as the adsorbent a magnetic hybrid material formed by graphene oxide and ferrite (Fe₃O₄@GO), along with a subsequent determination by electrothermal atomic absorption spectrometry (ETAAS). On the one hand, when dithizone at a pH = 5 is used as an auxiliary agent, both Hg(II) and MeHg are retained on the adsorbent. Next, for the determination of both species, the solid collected by the means of a magnet is suspended in a mixture of 50 µL of HNO₃ (8% v/v) and 50 µL of H₂O₂ at 30% v/v by heating for 10 min in an ultrasound thermostatic bath at 80 °C. On the other hand, when the sample is set at a pH = 9, Hg(II) and MeHg are also retained, but if the solid collected is washed with N-acetyl-L-cysteine only, then the Hg(II) remains on the adsorbent, and can be determined as indicated above. The proposed procedure exhibits an enrichment factor of 49 and the determination presents a linear range between 0.1 and 10 µg L^-1 of mercury. The procedure has been applied to the determination of mercury in water samples from different sources.

Recent applications and novel strategies for mercury determination in environmental samples using microextraction-based approaches: A review

The growing need to monitor Hg levels in the environment to control its emissions and evaluate the effectiveness of reduction policies is driving the scientific community to focus efforts on creating analytical methods that are simpler, lower cost, more performing, and environmentally sustainable. In this context, an important contribution is provided by microextraction techniques, which have long proven to be simple, reliable, and to ensure an environmentally responsible sample preparation. This manuscript reviews the recent progress in the determination of environmental Hg using microextraction techniques. The considered studies involve all environmental compartments (i.e., air, water, soil, and biota) and have been discussed by grouping them according to the employed technique while pointing out the main advances achieved and the most important limitations. The ultimate goal is to provide an up-to-date overview of the analytical potential of microextraction techniques that can be exploited in various investigation fields and to highlight the most important knowledge gaps that should be addressed in the coming years, such as in-situ sampling, the use of natural materials, and the value of metrological support to obtain data SI-traceable and comparable.

Preconcentrations of Zn(II) and Hg(II) in Environmental and Food Samples by SPE on B. licheniformis Loaded Amberlite XAD-4

In this work, the separations and preconcentrations of Zn(II) and Hg(II) ions on Bacillus lichenifoemis loaded onto Amberlite XAD-4 resin by solid-phase extraction has been performed. The biosorbent was characterized by using FT-IR, SEM, and EDX. pH, sample flow rate, eluent type and concentration, amount of B. licheniformis and XAD-4 resin, sample volume, and possible interfering ions effect were investigated in details as experimental variables in the SPE procedure. Limit of detection values for Zn(II) and Hg(II) were detected as 0.03 and 0.06 ng mL^-1, respectively. 0.2-15 ng mL^-1 linear range values were achieved for Zn(II) and Hg(II), respectively. Relative standard deviation values were found to be lower than 5%. For validation of the procedure, the certified standard reference materials (CWW-TM-D, EU-L-2, NCS ZC73O14, NCS ZC73350) were analyzed. The concentrations of Zn(II) and Hg(II) in water and food samples were measured by ICP-OES. Consequently, it can be inferred that the immobilized B. licheniformis microcolumn has ideal selectivity for Zn(II) and Hg(II) biosorption.

Ultrasound-assisted dispersive solid phase extraction for promoting enrichment of ng L-1 level Hg2+ on ionic liquid coated magnetic materials

Herein, we investigated the enrichment behavior of inorganic mercury (Hg²⁺) on magnetic adsorbent with different ultrasound (US) energy field input. The enrichment rate of 0.10 μg L^-1 mercury is increased by 4.5 times after US instead of stirring as dispersion mode. The input of higher frequency and power ultrasound can accelerate the enrichment of magnetic ionic liquid adsorbent and reduce the Hg²⁺ residue, importantly, which has not been reported. The positive correlation between cavitation effect and acoustic frequency and power in imaging experiments documents that US parameters are the key factors affecting the magnetic solid phase extraction. In addition, in-situ desorption and detection of adsorbate and recovery of adsorbent can be realized by slurry vapor generation (SVG) technology. The recovery of Hg²⁺ in four cycles is more than 90%, which indicates that the structure and properties of the material are not affected by the application of US. Hence, the degradation of adsorption properties caused by agglomeration of magnetic materials can be improved by introducing dispersion methods such as US. At the same time, 95% enrichment efficiency and 0.01-1.0 μg L^-1 linear calibration range corresponding to 150 mL sample documents that magnetic ionic liquid adsorbent combined with US and sensitive spectral detector can meet the needs of ng L^-1 level Hg²⁺ analysis in natural water samples.

Magnetic solid-phase extraction based on sulfur-functionalized magnetic metal-organic frameworks for the determination of methylmercury and inorganic mercury in water and fish samples

A novel magnetic metal-organic frameworks (Fe₃O₄@UiO-66-SH) was successfully prepared by coating Fe₃O₄ nanospheres with sulfur-functionalized UiO-66. The Fe₃O₄@UiO-66-SH possesses both the magnetic properties of Fe₃O₄ and the diverse properties of metal-organic framework (MOF) in one material, which has the superiority of high surface area, easy-operation and strong adsorb ability with mercury, is used for the magnetic solid-phase extraction of methylmercury (MeHg⁺) and inorganic mercury (Hg²⁺) in water and fish samples. The analyzes were conducted by high performance liquid chromatography-inductively coupled plasma mass spectrometry (HPLC-ICP-MS). The different pretreatment conditions influencing the extraction recoveries of Hg²⁺ and MeHg⁺, including adsorbent amount, pH, extraction time, elution solvent, elution volume, desorption time, co-existing ions and dissolved organic materials were investigated. Under the optimized conditions, the limits of detection (LODs) of Hg²⁺ and MeHg⁺ for water samples were 1.4 and 2.6 ng L^-1, and the limits of quantification (LOQs) of Hg²⁺ and MeHg⁺ for water samples were 4.7 and 8.7 ng L^-1. The enrichment factors (EFs) were 45.7 and 47.6 fold for Hg²⁺ and MeHg⁺, respectively. The accuracy of the proposed method was demonstrated by analyzing the certified reference material of fish tissue (GBW10029) and by determining the analyte content in spiked water and fish samples. The determined values were in good agreement with the certified values and the recoveries for the spiked samples were in the range of 84.5-96.8%.

Thymine-Functionalized Gold Nanoparticles (Au NPs) for a Highly Sensitive Fiber-Optic Surface Plasmon Resonance Mercury Ion Nanosensor

Mercury ion (Hg²⁺) is considered to be one of the most toxic heavy metal ions. Once the content of Hg²⁺ exceeds the quality standard in drinking water, the living environment and health of human beings will be threatened and destroyed. Therefore, the establishment of simple and efficient methods for Hg²⁺ ion detection has important practical significance. In this paper, we present a highly sensitive and selective fiber-optic surface plasmon resonance (SPR) Hg²⁺ ion chemical nanosensor by designing thymine (T)-modified gold nanoparticles (Au NPs/T) as the signal amplification tags. Thymine-1-acetic acid (T-COOH) was covalently coupled to the surface of 2-aminoethanethiol (AET)-modified Au NPs and Au film by 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride/N-Hydroxysuccinimide (EDC/NHS) activation effect, respectively. In the presence of Hg²⁺ ions, the immobilized thymine combines specifically with Hg²⁺ ions, and forms an Au/thymine-Hg²⁺-thymine/Au (Au/T-Hg²⁺-T/Au) complex structure, leading to a shift in SPR wavelength due to the strong electromagnetic couple between Au NPs and Au film. Under optimal conditions, the proposed sensor was found to be highly sensitive to Hg²⁺ in the range of 80 nM–20 µM and the limit of detection (LOD) for Hg²⁺ was as low as 9.98 nM. This fiber-optic SPR sensor afforded excellent selectivity for Hg²⁺ ions against other heavy metal ions such as Fe³⁺, Cu²⁺, Ni²⁺, Ba²⁺, K⁺, Na⁺, Pb²⁺, Co²⁺, and Zn²⁺. In addition, the proposed sensor was successfully applied to Hg²⁺ assay in real environmental samples with excellent recovery. Accordingly, considering its simple advantages, this novel strategy provides a potential platform for on-site determination of Hg²⁺ ions by SPR sensor.

Morphology-maintaining synthesis of copper hydroxy phosphate@metal-organic framework composite for extraction and determination of trace mercury in rice

A novel copper hydroxy phosphate@MOF composite DMP-Cu decorated by 2, 5-dimercapto-1, 3, 4-thiadiazol was facilely prepared and characterized. A dispersive SPE strategy using DMP-Cu as adsorbent combined with atomic fluorescence spectroscopy was developed for the selective capture of trace total mercury in rice sample. The adsorption mechanism showed that the Hg²⁺ removal process was fitted with pseudo second-order kinetics and the Langmuir adsorption model. The adsorbent was easy to be regenerated and the maximum adsorption capacity for the removal of Hg²⁺ was 249.5 mg g^-1 at the optimal pH of 4. X-ray photoelectron spectroscopy and Raman spectra verified the selective and strong interaction between Hg²⁺ and thiol/nitrogen-containing functional groups of DMTZ on DMP-Cu. The trace total mercury in rice samples was determined with detection limit of 0.0125 ng mL^-1 and relative standard deviation below 6%. The high recoveries were obtained in range of 98.8-109% for the spiked rice samples.

Nearly Monodisperse Copper Selenide Nanoparticles for Recognition, Enrichment, and Sensing of Mercury Ions

In the current work, Cu(I)_1.28Cu(II)_0.36Se nanoparticles were synthesized via a simple procedure and were applied for the first time for recognition, adsorption, enrichment, and detection of Hg(II) ions. The experimental results show that 99.9% Hg(II) could be adsorbed by Cu(I)_1.28Cu(II)_0.36Se nanoparticles within just 30 s, and the Hg(II) concentration could be lowered down to a super-low level of 0.01 ppb. Cu(I)_1.28Cu(II)_0.36Se nanoparticles also demonstrate high selectivity to Hg(II) and Ag(I) among nine representative metal ions. The enrichment experiments show that Hg(II) of ultratrace concentration could be enriched significantly by Cu(I)_1.28Cu(II)_0.36Se nanoparticles, and thus, the detection limit of Hg(II) based on inductively coupled plasma emission spectroscopy-mass spectrometry would be pushed down by 2 orders of magnitude. These outstanding features of Cu(I)_1.28Cu(II)_0.36Se nanoparticles could be well accounted for in terms of the solubility product principle and the high affinity between selenium and mercury. Cu(I)_1.28Cu(II)_0.36Se nanoparticles were also found to have peroxidase-like activity, which could be inhibited by Hg(II) but not by Ag(I). This unique characteristic coupled with the solubility product principle successfully allows recognition and detection of Hg(II) even in the presence of Ag(I), which has a similar pK_sp to Hg(II). As a result, the qualitative and quantitative analyses of Hg(II) could be performed by the naked eye and UV-visible spectroscopy, respectively. The current results indicate that Cu(I)_1.28Cu(II)_0.36Se nanoparticles not only have great potential in various aspects of dealing with Hg(II) pollution but would also shed light on discovering new nanomaterials to address other heavy metal ions.

Recent Advances in Nanomaterials for Analysis of Trace Heavy Metals

In an effort to achieve high sensitivity analysis methods for ultra-trace levels of heavy metals, numerous new nanomaterials are explored for the application in preconcentration processes and sensing systems. Nanomaterial-based methods have proven to be effective for selective analysis and speciation of heavy metals in combination with spectrometric techniques. This review outlined the different types of nanomaterials applied in the field of heavy metal analysis, and concentrated on the latest developments in various new materials. In particular, the functionalization of traditional materials and the exploitation of bio-functional materials could increase the specificity to target metals. The hybridization of multiple materials could improve material properties, to build novel sensor system or achieve detection-removal integration. Finally, we discussed the future perspectives of nanomaterials in the heavy metal preconcentration and sensor design, as well as their respective advantages and challenges. Despite impressive progress and widespread attention, the development of new nanomaterials and nanotechnology is still hampered by numerous challenges, particularly in the specificity to the target and the anti-interference performance in complex matrices.

Portable Hg2+ Nanosensor with ppt Level Sensitivity Using Nanozyme as the Recognition Unit, Enrichment Carrier, and Signal Amplifier

We report a portable and highly sensitive Hg²⁺ nanosensor, where the CuS nanozyme functions as an Hg²⁺ recognition unit, a Hg²⁺ enrichment/preconcentration carrier, and a signal amplifier/output unit. The as-designed enrichment-detection integration strategy is customizable and endows the sensor with both a wide detection range from 50 ppt to 400 ppb and a high sensitivity with a minimum detectable Hg²⁺ concentration of 50 ppt. In order to make the Hg²⁺ nanosensor portable and cost-effective, a commercial RGB sensor is employed here in conjunction with the Hg²⁺-dependent colorimetric reaction. More importantly, the as-developed Hg²⁺ nanosensor is feasible for analysis of real samples with satisfactory accuracy (deviation <10%) and reproducibility (recovery ∼82%). Thus, this portable Hg²⁺ nanosensor appears to be a viable solution to meet the actual needs of on-site and real-time mercury contamination analysis and may also pave the way to colorimetric nanosensors for other metal ions.