Double-shelled yolk-shell Si@C microspheres based electrochemical sensor for determination of cadmium and lead ions

Multi-dimensional signals coupling of simultaneous acquisition stripping current with laser-induced breakdown spectroscopy for accurate analysis of Cd(II) in coexisting Cu(II)

BACKGROUND

Despite significant advancements in detecting Cd(II) using nanomaterials-modified sensitive interfaces, most detection methods rely solely on a single electrochemical stripping current to indicate concentration. This approach often overlooks potential inaccuracies caused by interference from coexisting ions. Therefore, establishing multi-dimensional signals that accurately reflect Cd(II) concentration in solution is crucial.

RESULTS

In this study, we developed a system integrating concentration, electrochemical stripping current, and laser-induced breakdown spectroscopy (LIBS) characteristic peak intensity through in-situ laser-induced breakdown spectroscopy and electrochemical integrated devices. By simultaneously acquiring multi-dimensional signals to dynamically track the electrochemical deposition and stripping processes, we observed that replacement reactions occur between Cu(II) and Cd(II) on the surface of Ru-doped MoS2 modified carbon paper electrodes (Ru-MoS2/CP). These reactions facilitate the oxidation of Cd(0) to Cd(II) during the stripping process, significantly increasing the currents of Cd(II). Remarkably, the ingenious design of the Ru-MoS2 sensitive interface allowed for the undisturbed deposition of Cu(II) and Cd(II) during the electrochemical deposition process. Consequently, our in-situ integrated device achieved accurate detection of Cd(II) in complex environments, boasting a detection sensitivity of 8606.5 counts μM⁻1.

SIGNIFICANCE

By coupling multi-dimensional signals from stripping current and LIBS spectra, we revealed the interference process between Cu(II) and Cd(II), providing valuable insights for accurate electrochemical analysis of heavy metal ions in complex water environments.

Development of a robust method for Cd(II) ions analysis using CeO2- and CeO2-Cu-BTC-based electrochemical sensors

Simple and sensitive electrochemical sensors were fabricated from cerium oxide (CeO2) and copper-benzene tricarboxylic acid-modified cerium oxide (CeO2-Cu-BTC) materials for differential pulse voltammetric analysis of toxic cadmium (Cd) ions in aqueous solutions. The materials were prepared by hydrothermal method and structurally characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy with energy-dispersive X-ray (SEM-EDX), thermogravimetric analysis (TGA), and X-ray diffraction analysis (XRD). The CeO2-modified carbon paste electrode (CeCPE) and the CeO2-Cu-BTC-modified carbon paste electrode (CeBCPE) were electrochemically characterized by their cyclic voltammetry and electrochemical impedance study in standard K3[Fe(CN)6] single-electron redox process. Their electrochemical surface areas, electrode surface coverages, and charge transfer resistances were calculated to be 1.46 cm2, 2.338 × 10-5 mol∙cm-2, and 2790 Ω and 5.48 cm2, 2.476 × 10-5 mol∙cm-2, and 1254.65 Ω for CeCPE and CeBCPE, respectively. These fabricated electrodes were used as electrochemical sensors for cadmium ion estimation by optimizing the experimental parameters through differential pulse voltammetry. The optimized conditions included 10% modifier for CeCPE and 5% modifier for CeBCPE in 0.12 M HCl solution of pH 5 as supporting electrolyte at - 1.2 V deposition for 30 s in 0.01 to 10 mg L-1 linear cadmium solution range. Under these conditions, the limit of quantification (LOQ) of 0.368 mg L-1 and 0.005 mg L-1 was calculated for CeCPE and CeBCPE electrodes, respectively. The limit of detection (LOD) was calculated to be 0.121 mg L-1 and 0.002 mg L-1 for CeCPE and CeBCPE, respectively. All the experimental results indicated that electrodes fabricated from CeO2-Cu-BTC show better performance as compared to CeO2-based electrodes. Both these types of electrochemical sensors presented good repeatability and performance in the presence of interfering ions as well. From these findings, it can also be inferred that these electrochemical sensors can provide a simple and very sensitive method for approximation of toxic cadmium ions in aqueous solutions.

Hierarchical porous loofah-like carbon with sulfhydryl functionality for electrochemical detection of trace mercury in water

Mercury is a common contaminant found in natural waters, which is highly toxic to human health. Thus, the facile and reliable monitoring of mercury in waters is of great significance. In this study, we fabricated a novel loofah-like hierarchical porous carbon with sulfhydryl functionality (S-LHC), and applied it as an ultrasensitive sensor for the electrochemical detection of mercury in water. The S-LHC was prepared through the direct pyrolysis of a triazole-rich metal-organic framework (MOF), followed by chemical modification using thioglycolic acid. The highly conductive N-doped carbon framework of S-LHC facilitated the electron transfer in mercury electrochemical sensing. Meanwhile, the open hierarchical pore structure and abundant sulfhydryl groups allowed the fast diffusion and effective enrichment of mercury ions. Consequently, the S-LHC sensor exhibited an exceptionally high sensitivity for mercury ions, with the mercury detection limit (0.36 nM) orders of magnitude lower than the regulated values in drinking water (typically 10∼30 nM). The constructed sensor also afforded good anti-interference ability and excellent stability for long-term detection of mercury in a variety of complex real water samples. The present study provides not only a facile method for mercury detection, but also a new idea for the construction of highly sensitive electrochemical sensors.

Dual/Triple Template-Induced Evolved Emulsion for Controllable Construction of Anisotropic Carbon Nanoparticles from Concave to Convex

Anisotropic mesoporous carbon (AMC) nanoparticles with asymmetric external morphologies, topological internal structure, and superior performance of carbon species are attracting great attention because of their seductive features differentiating them from symmetric nanoparticles. However, a bewildering challenge but crucial desire remains to endow them with flexibly tunable morphology and pore structure. Herein, a dual/triple-templating evolved emulsion strategy for tunable fabrication of AMC nanoparticles with distinctive defined structure by interface-energy-induced self-assembly is first reported based on a brand-new mechanism. It describes the possible formation process of the concave-cavity structure and allows for manipulation of the longitudinal and lateral sizes systematically by adjusting emulsion polarity and sodium oleate dosage, respectively. Interestingly, the internal pore structure can be rearranged into radial channels and the external morphology can realize structural transformation from concave to convex by innovatively introducing the third template n-hexanol, which is unprecedented at nanoscale. Remarkably, due to the excellent properties of carbon species and unique structural characteristics, AMC nanoparticles not only demonstrate good biocompatibility but also exhibit splendid performance in improving the dissolution and release rates of insoluble drug and enhancing the enzyme catalytic efficiency. Generally, this approach provides new inspiration and insights for expanding exquisite anisotropic nanomaterials for many potential applications.

A novel electrochemical sensor for simultaneous detection of Cd2+ and Pb2+ by MXene aerogel-CuO/carbon cloth flexible electrode based on oxygen vacancy and bismuth film

Herein, a novel MXene aerogel-CuO/carbon cloth (MXA-CuO/CC) electrochemical sensor was constructed, and the synergistic adsorption of heavy metal ions by oxygen vacancies and Bi (III) was investigated with Cd²⁺ and Pb²⁺ as detection targets. The oxygen vacancies of CuO have a strong affinity for heavy metal ions, which promoted the adsorption of Cd²⁺ and Pb²⁺ on the electrode surface. In addition, the introduced Bi (III) can form alloys with heavy metal ions, which effectively enhanced the adsorption capacity of sensing electrodes for Cd²⁺ and Pb²⁺. Differential pulse anodic stripping voltammetry (DPASV) was used to study the performance of MXA-CuO/CC sensitive electrode for the detection of Cd²⁺ and Pb²⁺ separately and simultaneously. The constructed sensing electrode has excellent detection performance, and can detect Cd²⁺ (4 μg L^-1- 800 μg L^-1) and Pb²⁺ (4 μg L^-1- 1200 μg L^-1) simultaneously with detection limits of 0.3 μg L^-1 (Cd²⁺) and 0.2 μg L^-1 (Pb²⁺), respectively. The proposed sensor electrode also has good anti-interference performance, excellent stability and reproducibility. It is worth mentioning that the proposed method can accurately detect Cd²⁺ and Pb²⁺ in food and water samples, which is consistent with the detection results of inductively coupled plasma mass spectrometry (ICP-MS) and atomic absorption spectroscopy (AAS).

Construction of strontium phosphate/graphitic-carbon nitride: A flexible and disposable strip for acetaminophen detection

A facile technique has been used to synthesize the strontium phosphate interlinked with graphitic carbon nitride nanosheets (SrP/g-CN NSs) nanocomposite for highly selective detection of acetaminophen (AP). The formation of SrP/g-CN NSs nanocomposite is evidenced by several spectroscopic and analytical methods. It was demonstrated that the SrP/g-CN NSs modified screen-printed carbon electrode (SPCE) exhibits excellent catalytic performance with low peak potential towards AP detection than those of pristine SrP-, g-CN NSs-, and bare- SPCEs. The outstanding electrochemical performance can be attributed to the robust synergistic effect between SrP and g-CN NSs. Likewise, g-CN NSs possess a porous multilayer network, which provides a large surface area, fast charge transferability, electrical conductivity, and numerous active sites. Under the optimal conditions, the fabricated sensor could detect AP with a linear relationship range from 0.01 to 370 µM, and the detection limit is calculated to be as low as 2.0 nM. The proposed sensor is successfully used to determine AP in water samples with satisfactory results.

A new analytical approach for preconcentration, separation and determination of Pb(II) and Cd(II) in real samples using a new adsorbent: Synthesis, characterization and application

A green and efficient analytical approach was reported for simultaneous preconcentration, and separation of Pb(II) and Cd(II) in water, vegetables, and barbecue samples by dispersive solid-phase microextraction prior to their determination using flame atomic absorption spectrometry. A new poly-3-hydroxy butyrate-polyvinyl triethyl ammonium chloride comb-type amphiphilic cationic block copolymer (PHBvbNCl) was synthesized and characterized. Main variables such as pH, sorbent amount, adsorption time, eluent type, desorption time, and sample volume were optimized. Detection limits and working ranges for Pb(II) and Cd(II) were 0.03 μg L^-1, 0.15 μg L^-1, 0.1-250 μg L^-1 and 0.5-375 μg L^-1, respectively. Enhancement factor for Pb (II) and Cd (II) were 114 and 98. The adsorption capacity of PHBvbNCl for Pb(II) and Cd(II) was 175.2 mg g^-1 and 152.9 mg g^-1. After the accuracy of the method was confirmed by the analysis of certified reference materials, it was successfully applied to real samples. Finally, the analytical performance of the present method was compared with other methods.

Highly sensitive detection of Pb2+ and Cu2+ based on ZIF-67/MWCNT/Nafion-modified glassy carbon electrode

A series of different facile modification layers (MLs) was designed to gradually increase the electrochemical sensing performance of glassy carbon electrode (GCE) for simultaneously detecting Pb²⁺ and Cu²⁺. ML designs were mainly a different combination of ZIF-67, MWCNT and Nafion, and their different electrochemical sensing performances were investigated by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), square wave stripping voltammetry (SWSV) and chronocoulometry. The fabricated sensor, which modified with ZIF-67/MWCNT and Nafion layer, exhibited the biggest response peak current to Pb²⁺ and Cu²⁺. In addition, it displayed a wide linear detection range of 1.38 nM-5 μM for Pb²⁺ and 1.26 nM-5 μM for Cu²⁺, a detection accuracy of about 1 nM for both Pb²⁺ and Cu²⁺, and an excellent stability for both Pb²⁺ and Cu²⁺. We also analyzed the real water sample taken from Changchun's Sanjia Lake and Yan Lake. We believe this ML design provides instruction for building high-performance electrochemical sensing systems.

Development of highly efficient chemosensors for Cu2+ and N2H4 detection based on 2D polyaniline derivatives by template-free chemical polymerization method

Chemosensors play an important role in environmental protection, medical diagnosis and energy conservation. Although polyaniline and its derivatives and two-dimensional (2D) materials have been applied as chemosensors in many reports, the concept of two-dimensional (2D) polyaniline derivatives has not been achieved in chemosensors. Here, two kinds of two-dimensional (2D) polyaniline derivatives are designed and synthesized by template-free chemical polymerization. It can be found that these two two-dimensional (2D) chemosensors exhibit high selectivity and sensitivity to Cu²⁺ and N₂H₄. Moreover, it is noteworthy that one of the two-dimensional materials can achieve the limit of detection (LOD) of 45 nM and 8 nM for Cu²⁺ and N₂H₄, respectively. Especially, these results imply that this two-dimensional polyaniline derivative is promising as the chemosensor in sensing field.

Sensors Applied for the Detection of Pesticides and Heavy Metals in Freshwaters

Water is essential for every life living on the planet. However, we are facing a more serious situation such as water pollution since the industrial revolution. Fortunately, many efforts have been done to alleviate/restore water quality in freshwaters. Numerous sensors have been developed to monitor the dynamic change of water quality for ecological, early warning, and protection reasons. In the present review, we briefly introduced the pollution status of two major pollutants, i.e., pesticides and heavy metals, in freshwaters worldwide. Then, we collected data on the sensors applied to detect the two categories of pollutants in freshwaters. Special focuses were given on the sensitivity of sensors indicated by the limit of detection (LOD), sensor types, and applied waterbodies. Our results showed that most of the sensors can be applied for stream and river water. The average LOD was72.53±12.69 ng/ml (n=180) for all pesticides, which is significantly higher than that for heavy metals (65.36±47.51 ng/ml,n=117). However, the LODs of a considerable part of pesticides and heavy metal sensors were higher than the criterion maximum concentration for aquatic life or the maximum contaminant limit concentration for drinking water. For pesticide sensors, the average LODs did not differ among insecticides (63.83±17.42 ng/ml,n=87), herbicides (98.06±23.39 ng/ml,n=71), and fungicides (24.60±14.41 ng/ml,n=22). The LODs that differed among sensor types with biosensors had the highest sensitivity, while electrochemical optical and biooptical sensors showed the lowest sensitivity. The sensitivity of heavy metal sensors varied among heavy metals and sensor types. Most of the sensors were targeted on lead, cadmium, mercury, and copper using electrochemical methods. These results imply that future development of pesticides and heavy metal sensors should (1) enhance the sensitivity to meet the requirements for the protection of aquatic ecosystems and human health and (2) cover more diverse pesticides and heavy metals especially those toxic pollutants that are widely used and frequently been detected in freshwaters (e.g., glyphosate, fungicides, zinc, chromium, and arsenic).

A novel and fast responsive turn-on fluorescent probe for the highly selective detection of Cd2+ based on photo-induced electron transfer

A novel, highly sensitive and fast responsive turn-on fluorescence probe ADMPA for Cd²⁺ was successfully developed based on 2,9-dimethyl-1,10-phenanthroline and o-aminophenol.