Ligands dissociation induced gold nanoparticles aggregation for colorimetric Al3+ detection

A red fluorescent carbon dots with good water solubility for rapid detection of Al3+ in actual samples

We developed a facile strategy for the fabrication of red fluorescent carbon nanodots (R-CDs) and demonstrated their applications for Al3+ sensing. Red-emission carbon dots (CDs) were synthesized using a simple hydrothermal treatment with citric acid and urea as precursors, manifesting intriguing red-emission behaviour at 610 nm. With increasing Al3+ concentration, the fluorescence band at 610 nm decreased gradually. Monitoring the intrinsic fluorescence variation (I610nm ), as-prepared CDs were developed as an effective platform for fluorescent Al3+ sensing, with a linear range of 0.5-60.0 μM and a detection limit of 3.0 nM. More importantly, R-CDs have been applied successfully to the analysis of Al3+ in actual samples with satisfactory recoveries in the range 97.12-102.05%, which indicated that obtained CDs could be implemented as an effective tool for the identification and detection of Al3+ in actual samples.

Chromogenic Mechanisms of Colorimetric Sensors Based on Gold Nanoparticles

The colorimetric signal readout method is widely used in visualized analyses for its advantages, including visualization of test results, simple and fast operations, low detection cost and fast response time. Gold nanoparticles (Au NPs), which not only exhibit enzyme-like activity but also have the advantages of tunable localized surface plasmon resonance (LSPR), high stability, good biocompatibility and easily modified properties, provide excellent platforms for the construction of colorimetric sensors. They are widely used in environmental monitoring, biomedicine, the food industry and other fields. This review focuses on the chromogenic mechanisms of colorimetric sensors based on Au NPs adopting two different sensing strategies and summarizes significant advances in Au NP-based colorimetric sensing with enzyme-like activity and tunable LSPR characteristics. In addition, the sensing strategies based on the LSPR properties of Au NPs are classified into four modulation methods: aggregation, surface modification, deposition and etching, and the current status of visual detection of various analytes is discussed. Finally, the review further discusses the limitations of current Au NP-based detection strategies and the promising prospects of Au NPs as colorimetric sensors, guiding the design of novel colorimetric sensors.

Phosphatase-like activity of single-atom CeNC nanozyme for rapid detection of Al3

Single-atom nanozymes are a class of nanozymes with attractive enzyme-like activities. They usually mimic oxidoreductases and lack other types of enzyme-like activities. Hence, we verified a single-atom CeNC (SACeNC) nanozyme with an excellent phosphatase-like (PPA-like) activity, which could catalyze the dephosphorylation of inorganic phosphates. Meanwhile, we found that Al³⁺ could specifically combine with the O atom in its structure to form an Al-O bond, which could inhibit its PPA-like activity. Based on this principle, we have constructed a fast, portable, and efficient fluorescent liquid phase sensor to detect Al³⁺. The detection time was only 4 min, and the limit of detection (LOD) was 22.89 ng/mL in the linear range of 5-25 μg/mL. This study not only verified that single-atom nanozymes mimic phosphatase activities, but also applied its unique enzyme-like to the field of food safety rapid detection.

Detection and Difference Analysis of the Enzyme Activity of Colloidal Gold Nanoparticles With Negatively Charged Surfaces Prepared by Different Reducing Agents

Nanozymes are particles with diameters in the range of 1–100 nm, which has been widely studied due to their biological enzyme-like properties and stability that natural enzymes do not have. In this study, several reducing agents with different structures (catechol (Cc), hydroquinone (Hq), resorcinol (Rs), vitamin C (Vc), pyrogallic acid (Ga), sodium citrate (Sc), sodium malate (Sm), and sodium tartrate (St)) were used to prepare colloidal gold with a negative charge and similar particle size by controlling the temperature and pH. The affinity analysis of the substrate H2O2 and TMB showed that the order of activities of colloidal gold Nanozymes prepared by different reducing agents was Cc, Hq, Rs, Vc, Ga, Sc, Sm, St. It was also found that the enzyme activity of colloidal gold reduced by benzene rings is higher than that of the colloidal gold enzyme reduced by linear chains. Finally, we discussed the activity of the colloidal gold peroxidase based on the number and position of isomers and functional groups; and demonstrated that the nanozymes activity is affected by the surface activity of colloidal gold, the elimination of hydroxyl radicals and the TMB binding efficiency.

Simultaneous detection of aqueous aluminum(III) and chromium(III) using Persea americana reduced and capped silver nanoparticles

There is a significant interest to develop sensing devices that detect water toxins, especially heavy metal ions. Although there have already been numerical reports on detecting toxic heavy metal ions, the use of adaptable devices could enable a broader range of sensing applications. Here, we used fresh peel extract (PeA) and dried peel extract (DPeA) of Persea americana (Avocado) as a reducing and capping agent to synthesize and stabilize AgNPs. The dimensions of NPs were controlled by tuning pH, temperature, and volume of the reducing agent. The sensitivity and selectivity of the AgNPs toward various metal ions viz. Ni(II), Cd(II), Al(III), Hg(II), Cr(III), Ba(II), Pb(II), Zn(II), Co(II), Mn(II), Cu(II), Ca(II), Mg(II), and K(I) were studied. The detection probe was found to be selective and sensitive toward Al(III) and Cr(III) ions with the detection limit of 0.04 ppm and 0.05 ppm, respectively. High-resolution transmission electron microscope (HRTEM), ultraviolet-visible (UV-Vis) spectroscopy, and dynamic light scattering (DLS) analysis results confirm an agglomeration-based mechanism for sensing both metal ions. This method can be exploited for the colorimetric detection of toxic heavy metals in real water samples.

Chemical sensing with Au and Ag nanoparticles

Noble metal nanoparticles (NPs) are ideal scaffolds for the fabrication of sensing devices because of their high surface-to-volume ratio combined with their unique optical and electrical properties which are extremely sensitive to changes in the environment. Such characteristics guarantee high sensitivity in sensing processes. Metal NPs can be decorated with ad hoc molecular building blocks which can act as receptors of specific analytes. By pursuing this strategy, and by taking full advantage of the specificity of supramolecular recognition events, highly selective sensing devices can be fabricated. Besides, noble metal NPs can also be a pivotal element for the fabrication of chemical nose/tongue sensors to target complex mixtures of analytes. This review highlights the most enlightening strategies developed during the last decade, towards the fabrication of chemical sensors with either optical or electrical readout combining high sensitivity and selectivity, along with fast response and full reversibility, with special attention to approaches that enable efficient environmental and health monitoring.

Stimuli-Responsive Plasmonic Assemblies and Their Biomedical Applications

Among the diverse development of stimuli-responsive assemblies, plasmonic nanoparticle (NP) assemblies functionalized with responsive molecules are of a major interest. In this review, we outline a comprehensive and up-to-date overview of recently reported studies on in vitro and in vivo assembly/disassembly and biomedical applications of plasmonic NPs, wherein stimuli such as enzymes, light, pH, redox potential, temperature, metal ions, magnetic or electric field, and/or multi-stimuli were involved. Stimuli-responsive assemblies have been applied in various biomedical fields including biosensors, surfaced-enhanced Raman scattering (SERS), photoacoustic (PA) imaging, multimodal imaging, photo-activated therapy, enhanced X-ray therapy, drug release, stimuli-responsive aggregation-induced cancer therapy, and so on. The perspectives on the use of stimuli-responsive plasmonic assemblies are discussed by addressing future scientific challenges involving assembly/disassembly strategies and applications.

A “turn-on” small molecule fluorescent sensor for the determination of Al3+ ion in real samples: theoretical calculations, and photophysical and electrochemical properties

The fluorescence sensing properties of a naphthalene-based acetohydrazide (3) were investigated. A highly selective “turn-on” response was obtained towards Al3+ ions, and this was used for real sample analysis and development of paper test strips.

Rapid and selective detection of aluminum ion using 1,2,3-triazole-4,5-dicarboxylic acid-functionalized gold nanoparticle-based colorimetric sensor

A highly selective, sensitive, rapid, low-cost, simple and visual colorimetric system for Al³⁺ ion detection was developed based on gold nanoparticles (AuNPs) modified with 1,2,3-triazole-4,5-dicarboxylic acid (TADA). The modified gold nanoparticles (TADA–AuNPs) were first prepared by sodium citrate (Na₃Ct) reduction of chloroauric acid (HAuCl₄) and then capped with a TADA ligand. Five TADA–AuNPs sensors were constructed with sodium citrate (Na₃Ct)/chloroauric acid (HAuCl₄) under different molar ratios. Results showed that the molar ratio of Na₃Ct/HAuCl₄, TADA–AuNPs concentration, pH range and detection time had obvious influences on the performance of this colorimetric method. The optimal detection conditions for Al³⁺ ions were as follows: Na₃Ct/HAuCl4 molar ratio of 6.4 : 1, 0.1 mM of TADA–AuNPs concentration, 4–10 pH range and 90 s of detection time. Under the optimal conditions and using diphenyl carbazone (DPC) as a Cr³⁺ masking agent, this colorimetric sensor exhibited outstanding time efficiency, selectivity and sensitivity for Al³⁺ detection. In particular, the detection limits of this sensor obtained via UV-vis and the naked eye were 15 nM and 1.5 μM, respectively, which were much lower than the current limit (3.7 μM) for drinking water in WHO regulation and better than the previous reports. Moreover, this colorimetric sensing system could be used to for on-site, trace level and real-time rapid detection of Al³⁺ in real water samples.

A colorimetric sensor based on TADA–AuNPs accompanied by a masking agent DPC was constructed, with which the rapid quantification of Al³⁺ can be realized by UV-vis spectroscopy or naked eye observation.

Fluorescence and colorimetric dual-mode sensor for visual detection of malathion in cabbage based on carbon quantum dots and gold nanoparticles

A dual-mode fluorescence/colorimetric sensor based on carbon quantum dots (CQDs) and gold nanoparticles (GNPs) was developed for visual detection of malathion in cabbage. The CQDs-GNPs nanocomposite exhibited emission wavelength at 527 nm and absorption wavelength at 524 nm. The fluorescence intensity increased and absorption decreased with addition of malathion. Fluorescence and colorimetric calibration curves were established based on fluorescence intensity (R² = 0.9914) and absorbance (R² = 0.9608) in the range of 1 × 10^-9-1 × 10^-2 M, respectively. Furthermore, fluorescence and colorimetric standard arrays were prepared for visual detection of malathion according to the change of fluorescence brightness and color. Finally, the approximate concentrations of malathion in cabbage samples were estimated by the standard arrays and naked eyes. The calibration curves were used for accurate detection in cabbage samples with recoveries of 89.9%-103.4% (fluorescence) and 88.7%-107.6% (colorimetric). The established sensor for visual malathion detection in cabbage was accurate with strong application potential, especially for rapid screening.

Detection of ferrous ion by etching-based multi-colorimetric sensing of gold nanobipyramids

Colorimetric sensing methods based on non-spherically symmetric gold (Au) nanoparticles have become a powerful tool in the field of biomedical detection due to their intriguing plasmonic properties. In this study, Au nanobipyramids (Au NBPs) were used as colorimetric sensing probes to detect ferrous ions (Fe²⁺) through tip etching. The quick etching of Au NBPs along the longitudinal direction by superoxide radicals generated by the reaction of Fe²⁺ and H₂O₂ led local surface plasmon resonance (LSPR) to blue shift and produced vivid color change that could be used for visual inspection. Under the optimal reaction conditions, the peak shift of the Au NBPs and the logarithm of the concentrations of Fe²⁺ had a linear relationship in the range of 10 nM to 10 μM, with a very low detection limit of 1.29 nM. During the etching process, a different end shape of the Au nanoparticles results in a different process for the morphology transition, which makes the degree of spectral change and detection sensitivity significantly different. In the presence of trace amounts of Fe²⁺ (<1000 nM), the detection sensitivity of Au NBPs with sharp ends which rely on aspect ratio and truncation is nine times higher than that of gold nanorods with round ends which only rely on aspect ratio. Although the color change of larger-sized Au NBPs was not clear during detection, the LSPR peak shift was more severe. Therefore, the system provides different modes for detecting Fe²⁺ according to Au NBPs with different sizes and characteristics.