HPLC-ICPMS/MS shows a significant advantage over HPLC-ICPMS for the determination of perchlorate in ground, tap, and river water

Determination of trace perchlorate in river water by ion chromatography with online matrix removal and sample concentration

This paper proposes a simple ion chromatographic approach to determine trace amounts of perchlorate in river water samples. Determination of the trace perchlorate by ion chromatography typically faces two challenges: interference by matrix ions such as chloride, nitrate, and sulfate in the samples and insufficient detection sensitivity. In the present study, online pretreatment of the samples with an OnGuard II Ba/Ag/H disposable sample pretreatment cartridge prevented the sulfate peak tailing from overlapping with the perchlorate peak on the chromatogram. In addition, the matrix removal enabled as large as 10 mL of sample to be loaded into a high exchange capacity anion concentrator, significantly improving perchlorate's detection sensitivity. The proposed approach achieved a detection limit (S/N = 3) of 0.046 µg L^-1 without using a costly mass spectrometer and successfully determined sub µg L^-1 levels of perchlorate in river water.

High-Resolution Elemental Mass Spectrometry Using LC-ICP-Nanospray-Orbitrap for Simultaneous and Species-Independent Quantitation of Fluorinated and Chlorinated Compounds

Simultaneous elemental detection of F and Cl offers quantitation of fluorinated and chlorinated compounds and their transformation products without compound-specific standards. Despite wide-ranging applications, this capability has been hindered by fundamental and technical shortcomings of current inductively coupled plasma (ICP)-MS methods in ion formation and isobaric interference elimination. These hurdles are alleviated here via a chemical ionization method. Fluorine and chlorine in analytes are first converted to HF and HCl by an ICP with post-plasma recombination and subsequently react with barium-containing ions supplied by a nanospray, yielding BaF+ and BaCl+ as elemental reporter ions. Notably, the method is readily interfaced to an Orbitrap MS which eliminates isobaric interferences at resolving powers as low as 35,000, far greater than that of current ICP-MS instruments. Moreover, the instrument is easily reverted to the ESI-MS mode for complementary molecular characterization. To demonstrate analytical capabilities, a workflow for rapid quantitation of compounds separated by reversed-phase liquid chromatography is developed using a species-independent calibration. The independent F and Cl measurements agree with each other, providing recoveries of >90% and LODs of 8-12 pmol Cl and 5-12 pmol F on the column. The workflow along with LC-ESI-MS on the same instrument is then applied to identify and quantify in-vitro drug metabolites, yielding total drug-related material recoveries of >80% and quantitation of minor metabolites summing to 8% of the total drug-related compounds. These results highlight the strengths of simultaneous F and Cl speciation for rapid quantitation with applications in early drug development.

Elution with 1,2-Hexanediol Enables Coupling of ICPMS with Reversed-Pase Liquid Chromatography under Standard Conditions

The inductively coupled plasma mass spectrometry (ICPMS) has been attracting increasing attention for many applications as an element-selective chromatographic detector. A major and fundamental limitation in coupling ICPMS with liquid chromatography is the limited compatibility with organic solvents, which has so far been addressed via a tedious approach, collectively referred to as the “organic ICPMS mode”, that can decrease detection sensitivity by up to 100-fold. Herein, we report 1,2-hexanediol as a new eluent in high-performance liquid chromatography–ICPMS which enables avoiding the current limitations. Unlike commonly used eluents, 1,2-hexanediol was remarkably compatible with ICPMS detection at high flow rates of 1.5 mL min^–1 and concentrations of at least 30% v/v, respectively, under the standard conditions and instrumental setup normally used with 100% aqueous media. Sensitivity for all tested elements (P, S, Cl, Br, Se, and As) was enhanced with 10% v/v 1,2-hexanediol relative to that of 100% aqueous media by 1.5–7-fold depending on the element. Concentrations of 1,2-hexanediol at ≤30% v/v were superior in elution strength to concentrations at >90% v/v of the common organic phases, which greatly decreases the amount of carbon required to elute highly hydrophobic compounds such as lipids and steroids, enabling detection at ultra-trace levels. The proposed approach was applied to detect arsenic-containing fatty acids in spiked human urine, and detection limits of <0.01 μg As L^–1 were achieved, which is >100-fold lower than those previously reported using the organic ICPMS mode. Nontargeted speciation analysis in Allium sativum revealed the presence of a large number of hydrophobic sulfur-containing metabolomic features at trace levels.

Inspired by Nature-Functional Analogues of Molybdenum and Tungsten-Dependent Oxidoreductases

Throughout the previous ten years many scientists took inspiration from natural molybdenum and tungsten-dependent oxidoreductases to build functional active site analogues. These studies not only led to an ever more detailed mechanistic understanding of the biological template, but also paved the way to atypical selectivity and activity, such as catalytic hydrogen evolution. This review is aimed at representing the last decade’s progress in the research of and with molybdenum and tungsten functional model compounds. The portrayed systems, organized according to their ability to facilitate typical and artificial enzyme reactions, comprise complexes with non-innocent dithiolene ligands, resembling molybdopterin, as well as entirely non-natural nitrogen, oxygen, and/or sulfur bearing chelating donor ligands. All model compounds receive individual attention, highlighting the specific novelty that each provides for our understanding of the enzymatic mechanisms, such as oxygen atom transfer and proton-coupled electron transfer, or that each presents for exploiting new and useful catalytic capability. Overall, a shift in the application of these model compounds towards uncommon reactions is noted, the latter are comprehensively discussed.

Is the water disinfection by-product dichloroacetic acid biosynthesized in the edible mushroom Russula nigricans?

We report the first halogen speciation analysis study by high performance liquid chromatography coupled with inductively coupled plasma tandem mass spectrometry (HPLC-ICPMS/MS) in the fruiting bodies of various mushroom species. Non-targeted speciation analysis revealed the occurrence of dichloroacetic acid (DCAA) in the edible mushroom Russula nigricans. Multiple samples of this mushroom (n = 5) collected from different geographic non-industrial regions in two different countries confirmed the consistent presence of this species at a relatively narrow concentration range (23-37 mg kg^-1), whereas no other chlorinated acetic acid (e.g. chloroacetic acid and trichloroacetic acid) was detected. Neither DCAA nor any other chlorinated acetic acid were detected in any of the other mushroom species investigated in the present study, including seven different mushroom species of the same genus Russula, even though all mushrooms were collected from the same non-industrial geographic regions. Together with the previously reported biological activities of DCAA, these findings collectively suggest biosynthesis of this compound as an explanation for its dominant presence in R. nigricans, and constitute the first example of the dominant natural occurrence of this compound over other chlorinated acetic acids in a living organism. This may warrant a change in our view of the occurrence of dichloroacetic acid in nature, where primarily considered as a pollutant arising from water disinfection.

Parallel and Comparative Non-Targeted Metabolomic Speciation Analysis of Metalloids and Their Non-Metal Analogues by HPLC-ICPMS/MS in Mushrooms

With the introduction of tandem mass spectrometry to inductively coupled plasma mass spectrometry (ICPMS/MS), the potential for non-targeted elemental metabolomic analysis has been expanded to many non-metals of pivotal biological importance. Arsenic and selenium are trace elements that share chemical similarity with the non-metals phosphorus and sulfur, respectively, and this similarity can be exploited to gain more insight into the incompletely understood biological significance of these metalloids and the evolution of their biochemical pathways. As a proof of concept, we show the applicability of HPLC-ICPMS/MS for non-targeted and parallel speciation analysis of arsenic, selenium, phosphorus, and sulfur in mushrooms-metabolically diverse organisms. Incredibly contrasting levels of diversity were found in the metabolomic profiles of the four investigated elements among the various species along with sharp discrepancies among related elements (e.g. phosphorous vs. arsenic) in certain mushroom species. The present work shows that ICPMS/MS offers a new dimension in non-targeted metabolomic analysis and enables a unique comparative approach in investigating and tracking the biochemistry of related elements in moderately complex organisms.

Perchlorate Levels in Polish Water Samples of Various Origin

Perchlorate ion (ClO4−) is known as a potent endocrine disruptor and exposure to this compound can result in serious health issues. It has been found in drinking water, swimming pools, and surface water in many countries, however, its occurrence in the environment is still poorly understood. The information on perchlorate contamination of Polish waters is very limited. The primary objective of this study was to assess ClO4− content in bottled, tap, river, and swimming pool water samples from different regions of Poland and provide some data on the presence of perchlorate. We have examined samples of bottled, river, municipal, and swimming pool water using the IC–CD (ion chromatography–conductivity detection) method. Limit of detection and limit of quantification were 0.43 µg/L and 1.42 µg/L, respectively, and they were both above the current health advisory levels in drinking water. The concentration of perchlorate were found to be 3.12 µg/L in one river water sample and from 6.38 to 8.14 µg/L in swimming pool water samples. Importantly, the level of perchlorate was below the limit of detection (LOD) in all bottled water samples. The results have shown that the determined perchlorate contamination in Polish drinking waters seems to be small, nevertheless, further studies are required on surface and river samples. The inexpensive, fast, and sensitive IC–CD method used in this study allowed for a reliable determination of perchlorate in the analyzed samples. To the best of our knowledge, there are no other studies seeking to assess the perchlorate content in Polish waters.

Simultaneous Determination of Chlorinated and Brominated Acetic Acids in Various Environmental Water Matrixes by High-Performance Liquid Chromatography-Inductively Coupled Plasma Tandem Mass Spectrometry without Sample Preparation

The halogenated acetic acids (HAAs) are generally considered as environmental contaminants and are suspected to pose a major public health concern. The inductively coupled plasma mass spectrometry (ICPMS) has been improved by coupling with the tandem mass spectrometry technology (ICPMS/MS), enabling ultratrace determination of heteroatoms. There have been few reports about the determination of chlorine-containing analytes by high-performance liquid chromatography (HPLC)-ICPMS/MS but none about utilizing this technique for the speciation analysis of organic halogenated compounds in environmental matrixes. We report a rapid method for the simultaneous determination of up to nine chlorinated and brominated acetic acids by HPLC-ICPMS/MS in Austrian surface, ground, and tap water. The chromatographic separation of the main five regulated haloacetic acids (so-called HAA5: chloroacetic acid, dichloroacetic acid, trichloroacetic acid, bromoacetic acid, and dibromoacetic acid) could be achieved in <6 min with limits of detection of 1.4-1.6 μg Cl L-1 and 0.8-1.5 μg Br L-1 for the chlorinated and brominated acetic acids, respectively. The method was validated through recovery experiments at four concentration levels (10-500 μg L-1) as well as by analyzing the U.S. Environmental Protection Agency (EPA) 552.2 CRM (certified reference material) in pure water and in three different water matrixes (tap, river, and groundwater), and thereby validated for repeatability (RSD% 1-10%), accuracy (±1.0-15%), and linearity (r2 = 0.9996-0.9999). The method fulfills the regulatory concentration limits by the EPA for HAA5 [maximum contaminant level (MCL) 60 μg L-1] and the limits currently being reviewed by the European Union for HAA9 (80 μg L-1) and demonstrates the advantages of HPLC-ICPMS/MS for the analysis of environmental water samples for halogen-tagged contaminants.