A multiple fluorescein-based turn-on fluorophore (FHCS) identified for simultaneous determination and living imaging of toxic Al3+ and Zn2+ by improved Stokes shift

Folic acid capping Bi3+-doped Ag quantum dots for enzyme-like dual-mode recognition of toxic S2- and visual sensing of NO2. Anal Chim Acta 2024;1319:342963. [PMID: 39122276 DOI: 10.1016/j.aca.2024.342963] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

BACKGROUND

NO2- and S2- are two kinds of common toxic anions widely distributed in environmental water, soil and food products. Human beings have suffered a lot of diseases from intake of excessive NO2- or S2-, i.e., infantile methemoglobin, cancer and even to death. Although tremendous efforts have been afforded to monitor NO2- and S2-, most were high instrument-depended with complex processing procedures. To keep food safety and to protect human health, it will be a huge challenge to develop a convenient and efficient way to monitor S2- and NO2- in practice.

RESULTS

A kind of folic acid capping Bi3+-doped Ag quantum dots (FA@Bi3+-Ag QDs) was developed for the first time by one-pot homogeneous reduced self-assembly. Not only did FA@Bi3+-Ag QDs possess intrinsic fluorescent property, it expressed synergistic peroxidase-like activity to catalyze the redox of 3,3',5,5'-tetramethylbenzidine (TMB) and H2O2 with Km/vmax of 0.087 mM/6.61 × 10-8 M s-1 and 6.42 mM/6.25 × 10-7 M s-1 respectively. Interestingly, trace S2- could exclusively alter its fluorescent property and peroxidase-like activity, exhibiting significant hypochromic and "turn-on" fluorescent effects. While trace NO2- could make FA@Bi3+-Ag QDs-TMB-H2O2 system hyperchromic. Under the optimized conditions, FA@Bi3+-Ag QDs were applied for dual-mode recognition of S2- and visual sensing of NO2- in real food samples with satisfactory recoveries, i.e., 100.7-107.9 %/95.8-104.7 % and 97.2-104.8 % respectively. The synergistic enzyme-mimic mechanism of FA@Bi3+-Ag QDs and its selective response mechanisms to S2- and NO2- were also proposed.

SIGNIFICANCE

This represents the first nanozyme-based FA@Bi3+-Ag QDs system for dual-mode recognition of S2- and visual sensing of NO2-, well meeting the basic requirement in drinking water set by WHO. It will offer a promising way for multi-mode monitoring of different pollution using the same nanozyme-based sensor.

Turn-on detection of Al3+ ions using quinoline-based tripodal probe: mechanistic investigation and live cell imaging applications

In this study, an easily synthesizable Schiff base probe TQSB having a quinoline fluorophore is demonstrated as a fluorescent and colorimetric turn-on sensor for Al3+ ions in a semi-aqueous medium (CH3CN/water; 4 : 1; v/v). Absorption, emission and colorimetric studies clearly indicated that TQSB exhibited a high selectivity toward Al3+, as observed from its excellent binding constant (Kb = 3.8 × 106 M-1) and detection limit (7.0 nM) values. TQSB alone was almost non-fluorescent in nature; however, addition of Al3+ induced intense fluorescence at 414 nm most probably due to combined CHEF (chelation-enhanced fluorescence) and restricted PET effects. The sensing mechanism was established via Job's plot, NMR spectroscopy, ESI-mass spectrometry, and density functional theory (DFT) analyses. Furthermore, to evaluate the applied potential of probe TQSB, its sensing ability was studied in real samples such as soil samples and Al3+-containing Digene gastric tablets as well as on low-cost filter paper strips. Fluorescence microscopy imaging experiments further revealed that TQSB can be used as an effective probe to detect intracellular Al3+ in live cells with no cytotoxicity.

Antimicrobial, antioxidant, cell imaging and sensing applications of fluorescein derivatives: A review

Fluorescein itself is a synthetic organic compound and a prominent member of the xanthene dye family. It exhibits strong fluorescence under ultraviolet (UV) or blue light excitation, making it widely used in various applications, including fluorescence microscopy, flow cytometry, immunoassays, and molecular biology techniques. One of the reasons fluorescein derivatives are highly valuable is their tunable fluorescence properties. Through chemical modifications of the fluorescein structure, different functional groups or substituents can be introduce, altering the compound's fluorescence characteristics such as emission wavelength, intensity, and photo stability. This flexibility allows for tailoring of fluorescent probes to specific experimental requirements, enhancing their utility in a range of scientific disciplines. Fluorescein derivatives also possess excellent antimicrobial and antioxidant activity. This review sheds light on the significant impact of fluorescein derivatives as biological active compounds, highlighting their potential in designing new therapeutic agents with antimicrobial properties. Additionally, their role as antioxidants is discussed. A major aspect covered in the review is the application of fluorescein derivatives as powerful cell imaging probes. Their unique fluorescent properties make them valuable tools for visualizing cellular structures and processes, opening up new possibilities for studying cellular dynamics and interactions.

Turn-on detection of Al3+ and Zn2+ ions by a NSN donor probe: reversibility, logic gates and DFT calculations

An efficient dual functional naphthalene-derived Schiff base NpSb probe has been synthesised and evaluated for its fluorescence and chromogenic response towards metal ions. The NpSb probe was capable of selectively recognising Al3+ and Zn2+ ions when they were excited at the same wavelength in an aqueous organic solvent system. Almost non-fluorescent NpSb displayed a 'turn-on' fluorescence response when treated with Zn2+ (λem = 416 nm) and Al3+ (λem = 469 nm) ions due to the chelation-enhanced fluorescence (CHEF) effect. The limit of detection (LoD) values for Al3+ and Zn2+ have been determined to be 38.0 nM and 43.0 nM, respectively. The binding constants for Al3+ and Zn2+ were found to be 1.18 × 106 M-1 and 3.5 × 105 M-1, respectively. The NpSb also acted as a colorimetric sensor for Al3+ as the colour of the probe's solution turned to pale green from colourless upon Al3+ addition. The binding mechanism between NpSb and Zn2+/Al3+ was supported by the ESI-MS, Job's plot, NMR, and DFT studies. The reversibility experiments were carried out with an F- ion and EDTA with the development of corresponding logic gates. Moreover, NpSb could be applied to detect Al3+ ions in real samples such as tap water, distilled water and soil samples.

Synthesis and photophysical investigation of Schiff base as a Mg2+ and Zn2+ fluorescent chemosensor and its application

In view of the fluorescent switching properties and anti-fatigue properties of diarylethene, a diarylethene fluorescent chemosensor for the immediate detection of zinc ion (Zn²⁺ ) and magnesium ion (Mg²⁺ ) in acetonitrile was synthesized in this article. The structure of 1o was determined by performing spectroscopy and elemental analysis. The presence of Zn²⁺ or Mg²⁺ made the chemosensor 1o show an obvious "turn-on" fluorescent signal (bright yellow-green for Mg²⁺ and bright cyan for Zn²⁺ ). The fluorescent change caused by the 1:1 binding of 1o and Zn²⁺ or Mg²⁺ might be due to hindering the excited-state intramolecular proton transfer (ESIPT) process, which were bolstered by Benesi-Hildebrand analysis, Job's plot curves, proton nuclear magnetic resonance (¹ H-NMR) titration and mass spectrometry. The limits of detection were acquired from the standard curve plots for Mg²⁺ at 44.6 nM and for Zn²⁺ at 14 nM. Based on the fluorescent behaviors, a logic gate was constructed with the emission intensity at 528/518 nm as output signal, the ultraviolet-visible (UV-vis) lights, Mg²⁺ /Zn²⁺ and EDTA as input signals. Exogenous Zn²⁺ and Mg²⁺ fluorescent bioimaging were performed on Hela cells with 1o, indicating its potential application in biodiagnostic analysis. In particular, 1o was manufactured into test paper, and Zn²⁺ or Mg²⁺ can be conveniently, efficiently and qualitatively identified by the fluorescent color variation of the test strips.

A Selective and ''Off-On'' Fluorescent Chemosensor Based on Fluorescein for Al3+: Synthesis, Characterization, Spectroscopy Analyses, and DFT Calculation

An efficient fluorescent cation chemosensor based on fluorescein L4 was well prepared and identified with spectroscopy analyses. UV-vis and fluorescence measurements examined the analyte complexation of the L4 with various cations, demonstrating a clear tendency to Al³⁺ ion. In the Job plot study, a stoichiometry ratio of a complex between L4 and Al³⁺ ion was determined to be 1: 2 (L4: Al³⁺). A stoichiometry ratio of complex between L4 and Al³⁺ ion was determined to be 1: 2 (L4: Al³⁺) using the Job plot. The association constant (K_a) of the L4-Al³⁺ complex was found 2.8 × 10⁷ M^-2. The obtained limit of detection (LOD) value (1.37 × 10^-6 M for Al³⁺) exhibited the considerable sensitivity of the chemosensor L4 to Al³⁺ ion. DFT/TD-DFT calculations have also been employed to support the binding mode and photophysical properties of the complexation of chemosensor L4 to Al³⁺ ion and also to investigate the enhancement of L4 fluorescence by Al³⁺ ion.

Synthesis of a novel triphenylamine-based multifunctional fluorescent probe for continuous recognition application

In this paper, a novel fluorescent probe, TPA-PAT, with continuous recognition based on triphenylamine was designed, synthesized, and characterized by NMR, IR, and fluorescence spectrophotometry techniques.

A Significant Fluorescence Turn-On Probe for the Recognition of Al3+ and Its Application

An easy prepared probe, BHMMP, was designed and synthesized, which displayed a significant fluorescence enhancement (over 38-fold) and obvious color change in the recognition of Al³⁺. The binding ratio of probe BHMMP to Al³⁺ was determined as 1:1, according to Job plot. The binding mechanism was fully clarified by the experiments, such as FT-IR spectrum, ESI-MS analysis, and ¹H NMR titration. A DFT study further confirmed the binding mode of BHMMP to Al³⁺. The limit of detection (LOD) for Al³⁺ was determined as low as 0.70 µM, based on the fluorescence titration of BHMMP. Moreover, the results from real sample experiments, including real water samples, test papers, and cell images, well-demonstrated that BHMMP was capable of sensing Al³⁺ in environmental and biological systems.

A visible-light-gated donor–acceptor Stenhouse adduct chemosensor: synthesis, photochromism and naked-eye colorimetric/fluorometric sensing of Al3+ and Zn2+

A visible-light-gated donor–acceptor Stenhouse adduct chemosensor is designed for the colorimetric/fluorometric sensing of Al3+ and Zn2+.

A novel AIE-active camphor-based fluorescent probe for simultaneous detection of Al3+ and Zn2+ at dual channels in living cells and zebrafish

A novel dual-functional probe N'-(2-hydroxy-5-((4,7,7-trimethyl-3-oxobicyclo[2.2.1] heptan-2-ylidene)methyl) benzylidene)picolinohydrazide (PSH) was constructed from natural camphor. This probe showed strong yellow-green fluorescence at 535 nm due to its aggregation-induced emission (AIE) feature. Interestingly, the probe PSH displayed a significant turn-on fluorescence response towards Al³⁺ (green fluorescence at 500 nm) and Zn²⁺ (orange fluorescence at 555 nm) at two different emissive channels. The detection limits of PSH towards Al³⁺ and Zn²⁺ were found to be 12.1 nM and 14.2 nM, respectively. PSH exhibited excellent selectivity and anti-interference performance and could distinguish between Al³⁺/Zn²⁺ and identify whether Zn²⁺ exists in the PSH-Al³⁺ complex by adding ATP. The binding mechanisms between PSH and Al³⁺/Zn²⁺ ions were supported by ¹H NMR, HRMS analysis, and density functional theory (DFT) calculations. Based on its outstanding sensing properties, the probe PSH was used to establish molecular logic function gates. Moreover, the probe PSH could be applied to detect Al³⁺ and Zn²⁺ in real environmental water, and fluorescence detection was well demonstrated by test strips. Furthermore, the probe PSH was employed for imaging Al³⁺ and Zn²⁺ in HeLa cells and zebrafish.

A neoteric dual-channel spectral sensor for wide-range pH detection based on variables in UV-vis peak and intensity

A water-soluble 2',4',6'-trihydroxy phenylazo luminol dye (THPL) with a D-π-A conjugated structure was developed for the first time for the dual-channel spectral sensing of a wide-range of pH values in aqueous solutions, using phloroglucinol as the electron-donating group, heterocycle amide luminol as the electron-accepting one and -NN- as the π-conjugated bridge. Its UV-vis absorption spectrum, especially its spectral response to pH, was investigated in detail. The results confirmed that the proposed THPL exhibited superior UV-vis spectral properties, a strong molar absorption coefficient (ε_max = 3.35 × 10⁴ L mol^-1 cm^-1) and a small half-band width of ca. 126 nm. In particular, either the absorption intensity (Abs) or peak (λ_max) changed linearly with pH values from 3.0 to 10.0 under the optimized conditions. Notably, THPL expressed an exclusive dual-channel spectral response to pH, i.e., Abs (a.u.) = 0.1316 + 0.0278 pH (R² = 0.9921), λ_max = 441.5 - 6.64 pH (R² = 0.9968, pH = 3.0-6.0) and λ_max = 359.6 + 7.38 pH (R² = 0.9879, pH = 6.0-10.0). Under the optimized conditions, THPL was applied to detect pH values in some aqueous and fruit juice samples with satisfactory results. The reversible recognition mechanism was deduced by UV-vis titration, ¹H NMR titration and theoretical calculation.

Fluorescein Based Fluorescence Sensors for the Selective Sensing of Various Analytes

Fluorescein molecules are extensively used to develop fluorescent probes for various analytes due to their excellent photophysical properties and the spirocyclic structure. The main structural modification of fluorescein occurs at the carboxyl group where different groups can be easily introduced to produce the spirolactam structure which is non-fluorescent. The spirolactam ring opening accounts for the fluorescence and the dual sensing of analytes using fluorescent sensors is still a topic of high interest. There is an increase in the number of dual sensors developed in the past five years and quite a good number of fluorescein derivatives were also reported based on reversible mechanisms. This review analyses environmentally and biologically important cations such as Cu2+, Hg2+, Fe3+, Pd2+, Zn2+, Cd2+, and Mg2+; anions (F-, OCl-) and small molecules (thiols, CO and H2S). Structural modifications, binding mechanisms, different strategies and a comparative study for selected cations, anions and molecules are outlined in the article.

Fluorescent sensor based on triphenylamine for Zn2+ with high selectivity and imaging in living cells

It is of great importance to design a fluorescent sensor with high selectivity, sensitivity and large Stokes shift to zinc detection for environmental water sample and in vivo. Herein, A novel Zn²⁺ fluorescent sensor with larger Stokes shift (110 nm) 1-((5-(4-(diphenylamino)phenyl)pyridine-2-imino)methyl)naphthalene-2-ol (abbr. TPA-PN) was designed and synthesized. In DMF-H₂O (V: V = 1: 1, pH = 7.0) solution, it could achieve high selectivity and sensitivity to Zn²⁺, there was a linear responsive range of 0-20 μM of concentration of Zn²⁺ ions for the sensor, the detection limit was as low as 19.134 nM and the binding constant was calculated to be 3.24 × 10⁴ M^-1. The species of TPA-PN and zinc were clarified at different pH. Besides, the interaction properties and fluorescence mechanism were demonstrated by the species theory, density functional theory (DFT) calculation, ¹H NMR titration, FT-IR and MS. Most importantly, it provided a new real-time, on-site method and showed excellent potential in-vivo imaging ability.

Imine bond transformation of a dynamic Sm(III) macrocycle-based chemosensor: The indirect approach for detecting cyanuric chloride

Herein, we report our strategy to develop the efficient chemosensor and real-time monitoring technique for cyanuric chloride (TCT) detection. A luminescent macrocyclic mononuclear Sm(III) complex Sm-2_k bearing with two dynamic imine bonds has been constructed via the template synthesis between dialdehyde H₂Q_k and matched diamine 1,2-bis(2-aminoethoxy)ethane. Sensing experiments reveal that complex Sm-2_k exhibits the turn-off fluorescent and colorimetric response for TCT in CH₃OH. It is especially encouraging that this optical sensing process is not only rapid within 60 s but also high-efficient in the presence of TCT analogues as well as sensitive with the low limit of detection (LOD, 1.74 μM) and wide linear sensing range. Mechanism studies demonstrate that TCT sensing is mainly based on the imine bond transformation of probe Sm-2_k, which is due to the increased acidity induced by TCT. Meanwhile, a smartphone-based analytical method was developed to make complex Sm-2_k accessible for the real-time TCT detection by RGB value outputs. It is believed that this work can shed some constructive lights on design of chemosensors and convenient detection technique for highly reactive analytes.

A novel fluorescence sensor for relay recognition of zinc ions and nitric oxide through fluorescence ‘off–on–off’ functionality

The fluorescent ‘off–on–off’ probe for relay recognition of Zn²⁺ and nitro oxide (NO) was constructed with the detection limit of 10⁻⁸ mol L⁻¹.

Solid-State Emissive Metallo-Supramolecular Assemblies of Quinoline-Based Acyl Hydrazone

Development of fluorescence-based sensory materials for metal elements is currently in the mainstream of research due to the simplicity and usability of fluorescence as a method of detection. Herein, we report a novel "bis"-quinoline-based acyl hydrazone-named bQH that could be synthesized by a facile, low-cost method through simple condensation of hydrazide with an aldehyde. This acyl hydrazone showed emissive properties through Zn selective binding, especially in its solid-state, as shown by experiments such as UV-Vis, photoluminescence (PL), nuclear magnetic resonance (NMR), and inductively-coupled plasma-optical emission spectroscopies (ICP-OES), and energy-dispersive X-ray spectroscopy (EDS) mapping. The binding modes in which bQH coordinates to Zn2+ was proved to consist of two modes, 1:1 and 1:2 (bQH:Zn2+), where the binding mode was controlled by the Zn2+ ion content. Under the 1:1 binding mode, bQH-Zn2+ complexes formed a polymeric array through the metallo-supramolecular assembly. The resulting bQH-Zn2+ complex maintained its fluorescence in solid-state and exhibited excellent fluorescence intensity as compared to the previously reported quinoline-based acyl hydrazone derivative (mQH).

Recent developments of nanoenzyme-based colorimetric sensors for heavy metal detection and the interaction mechanism

This work highlights the application and interaction mechanism of metal nanoparticles, metal oxides, metal sulfides, graphene-based nanomaterials and G-quadruplex, etc. in nanoenzyme-based colorimetric sensors.