Target-triggered aggregation of gold nanoparticles for photothermal quantitative detection of adenosine using a thermometer as readout

Colorimetric and photothermal dual readout biosensor for flap endonuclease 1 based on target-prevented gold nanoparticles aggregation

A colorimetric and photothermal dual readout biosensor for Flap endonuclease 1 (FEN1) quantification was developed on the basis of target-prevented gold nanoparticles (AuNPs) aggregation. The exposed 5'-flap of double-flap DNA substrate modified on SAMBs was firstly cleaved by FEN1. Large amount of cleaved 5'-flap remained in the supernatant after simple magnetic separation, which can adsorb on the surface of AuNPs and effectively prevent the dispersed AuNPs from aggregation under high ionic concentration, accompanied with the color changing of the system, which can be recognized by nake eyes easily. The absorption intensity at 528 nm shows a good linear relationship with the increasing FEN1 concentration from 5.0 × 10-3 to 3.1 × 10-2 U μL-1 with a LOD of 1.6 × 10-3 U μL-1 (S/N = 3). Given the aggregated AuNPs have higher photothermal effect than that of the dispersed AuNPs, the target-prevented AuNPs aggregation avoids a sharp increase of temperature for the system under the laser radiation. The temperature change is linearly correlated with the FEN1 concentration in the range of 3.1 × 10-3-6.1 × 10-2 U μL-1 with a LOD of 1.1 × 10-3 U μL-1. The whole detection process can be completed within 1 h. The proposed system had been applied to detect FEN1 concentration in serum samples with satisfied results, which can be applied in resource-limited area easily and quickly.

Sensitization Strategies of Lateral Flow Immunochromatography for Gold Modified Nanomaterials in Biosensor Development

Gold nanomaterials have become very attractive nanomaterials for biomedical research due to their unique physical and chemical properties, including size dependent optical, magnetic and catalytic properties, surface plasmon resonance (SPR), biological affinity and structural suitability. The performance of biosensing and biodiagnosis can be significantly improved in sensitivity, specificity, speed, contrast, resolution and so on by utilizing multiple optical properties of different gold nanostructures. Lateral flow immunochromatographic assay (LFIA) based on gold nanoparticles (GNPs) has the advantages of simple, fast operation, stable technology, and low cost, making it one of the most widely used in vitro diagnostics (IVDs). However, the traditional colloidal gold (CG)-based LFIA can only achieve qualitative or semi-quantitative detection, and its low detection sensitivity cannot meet the current detection needs. Due to the strong dependence of the optical properties of gold nanomaterials on their shape and surface properties, gold-based nanomaterial modification has brought new possibilities to the IVDs: people have attempted to change the morphology and size of gold nanomaterials themselves or hybrid with other elements for application in LFIA. In this paper, many well-designed plasmonic gold nanostructures for further improving the sensitivity and signal output stability of LFIA have been summarized. In addition, some opportunities and challenges that gold-based LFIA may encounter at present or in the future are also mentioned in this paper. In summary, this paper will demonstrate some feasible strategies for the manufacture of potential gold-based nanobiosensors of post of care testing (POCT) for faster detection and more accurate disease diagnosis.

Recent Advances in the DNA-Mediated Multi-Mode Analytical Methods for Biological Samples

DNA-mediated nanotechnology has become a research hot spot in recent decades and is widely used in the field of biosensing analysis due to its distinctive properties of precise programmability, easy synthesis and high stability. Multi-mode analytical methods can provide sensitive, accurate and complementary analytical information by merging two or more detection techniques with higher analytical throughput and efficiency. Currently, the development of DNA-mediated multi-mode analytical methods by integrating DNA-mediated nanotechnology with multi-mode analytical methods has been proved to be an effective assay for greatly enhancing the selectivity, sensitivity and accuracy, as well as detection throughput, for complex biological analysis. In this paper, the recent progress in the preparation of typical DNA-mediated multi-mode probes is reviewed from the aspect of deoxyribozyme, aptamer, templated-DNA and G-quadruplex-mediated strategies. Then, the advances in DNA-mediated multi-mode analytical methods for biological samples are summarized in detail. Moreover, the corresponding current applications for biomarker analysis, bioimaging analysis and biological monitoring are introduced. Finally, a proper summary is given and future prospective trends are discussed, hopefully providing useful information to the readers in this research field.

Photothermal visual sensing of alkaline phosphatase based on the etching of Au@MnO2 core-shell nanoparticles

Alkaline phosphatase (ALP), as a crucial enzyme involved in many physiological activities, is always used as one of the significant biomarkers in clinical diagnosis. Herein, a novel, simple, and effective photothermal quantitative method based on the etching of MnO₂-coated gold nanoparticles (Au@MnO₂ NPs) was established for ALP activity assay with a household thermometer-based visual readout. The photothermal effect of Au@MnO₂ NPs is much higher than that of MnO₂ NPs or Au NPs. The MnO₂ shell of Au@MnO₂ NPs can be etched by ascorbic acid, a product of ALP-catalyzed hydrolysis of 2-phospho-l-ascorbic acid. With the etching of Au@MnO₂ NPs, the photothermal conversion efficiency decreased gradually, causing the decrease of the temperature increment of the solutions by degrees. A household thermometer, instead of large-scale and professional instruments, was used as a signal reader to realize the visual quantitative detection. The photothermal platform was used successfully for the determination of ALP with a wide linear range from 2.0 to 50 U/L and a detection limit as low as 0.75 U/L. Moreover, the inhibition efficiency of sodium vanadate for ALP activity was investigated, proving the photothermal quantitative method will be a potential platform for screening enzyme inhibitors. Such a sensitive, facile, and low-cost sensing assay provides a new prospect to develop platforms for point-of-care testing.

Bifunctional M13 Phage as Enzyme Container for the Reinforced Colorimetric-Photothermal Dual-Modal Sensing of Ochratoxin A

"Point of care" (POC) methods without expensive instruments and special technicians are greatly needed for high-throughput analysis of mycotoxins. In comparison, the most widely used screening method of the conventional enzyme-linked immunosorbent assay (ELISA) confronts low sensitivity and harmful competing antigens. Herein, we develop a plasmonic-photothermal ELISA that allows precise readout by color-temperature dual-modal signals based on enzymatic reaction-induced AuNP aggregation for highly sensitive detection of ochratoxin A (OTA). The bifunctional M13 phage carrying OTA that mimics the mimotope on the end of p3 proteins and abundant biotin molecules on the major p8 proteins is adopted as an eco-friendly competing antigen and enzyme container for amplifying the signal intensity. Under optimal conditions, both colorimetric and photothermal signals enable good dynamic linearity for quantitative OTA detection with the limits of detection at 12.1 and 8.6 pg mL-1, respectively. Additionally, the proposed ELISA was adapted to visual determination with a cutoff limit of 78 pg mL-1 according to a vivid color change from deep blue to red. The recoveries of OTA-spiked corn samples indicate the high accuracy and robustness of the proposed method. In conclusion, our proposed strategy provides a promising method for eco-friendly and sensitive POC screening of OTA. Moreover, it can be easily applied to other analytes by changing the involved specific mimotope sequence.

Analyte-triggered in situ “off–on” of Tyndall effect for smartphone-based quantitative nanosensing of Ag+ ions

This work describes two new colorimetric methods for smartphone-based point-of-care nanosensing of toxic Ag⁺ ions. They were based on the analyte-triggered in situ "off-on" of Tyndall effect (TE) of non-plasmonic colloid or plasmonic metal nanoprobes. The first TE-inspired assay (TEA) focused on the initial analytical application of precipitation reactions where a non-plasmonic AgCl colloid could be formed once mixing the analyte with a NaCl solution. Such AgCl colloid displayed strong visual TE signals after their irradiation by a laser pointer pen, which unexpectedly achieved a detection limit of ~ 400 nM. The second TEA was further designed to reduce the limit down to ~ 78 nM using the analyte's oxidizability towards 3,3',5,5'-tetramethylbenzidine molecules. The redox reaction could create positively charged products that could make negatively charged plasmonic gold nanoparticles aggregate through electrostatic interactions to remarkably amplify their TE responses. Both limits were lower than the minimum allowable Ag⁺ level (~ 460 nM) in drinking water issued by the World Health Organization. The satisfactory recovery results for detecting Ag⁺ ions in river, pond, tap, and drinking water additionally demonstrated good selectivity, accuracy and practicality of the proposed methods for potential point-of-need uses in environmental analysis, public health, water safety, etc.

Recent advances in electrochemical-based sensors amplified with carbon-based nanomaterials (CNMs) for sensing pharmaceutical and food pollutants

Foodborne-related infections due to additives and pollutants pose a considerable task for food processing enterprises. Therefore, the competent, cost-effective, and quick investigation of nutrition additives and contaminants is essential to reduce the threat of public fitness problems. The electrochemical sensor (ECS) shows facile and potent analytical approaches desirable for food protection and quality inspection over traditional methods. The consequence of a broad display of nanomaterials has paved the path for their relevance in designing high-performance ECSs appliances for medical diagnostics and conditions and food protection. This review article has discussed the importance of electrochemical-based sensors amplified with carbon-based nanomaterials (CNMs). Initially, we have demonstrated the types of pharmaceutical and food/agriculture pollutants (such as pesticides, heavy metals, antibiotics and other medical drugs) present in water. Subsequently, we have compiled the information on electrochemical techniques (such as voltammetric and electrochemical impedance spectroscopy) and their crucial parameters for detecting pollutants. Further, the applications of CNMs for sensing pharmaceutical and food pollutants have been demonstrated in detail. Finally, the topic has been concluded with existing challenges and future prospects.

Rapid photothermal detection of foodborne pathogens based on the aggregation of MPBA-AuNPs induced by MPBA using a thermometer as a readout

Rapid and portable detection of foodborne pathogens is of great significance for food safety and public health. The colorimetric methods based on naked-eye have been demonstrated to be a suitable qualitative method for point-of-care testing (POCT). However, analytical instruments like a microplate reader must be needed for the quantitative assay. To overcome its limitation, we herein report a novel photothermal method for foodborne pathogens based on the photothermal effect of aggregated mercaptophenylboronic acid-functionalized AuNPs (MPBA-AuNPs) induced by MPBA to translate the colorimetric detection into a simple temperature measurement using thermometers as the readout. The aggregated AuNPs show higher photothermal conversion efficiency than well-separated AuNPs under 660 nm laser irradiation. In the presence of bacteria, MPBA-AuNPs will attach to the surface of bacteria and keep separated from aggregation induced by excess MPBA, resulting in a lower temperature increase under 660 nm laser irradiation. Using E. coli O157:H7 as a model target, a good linear relationship is observed between temperature increase and bacteria concentration from 1.00 × 10⁵-1.00 × 10⁹ cfu mL^-1 (R² = 0.9877) with a detection limit of 1.97 × 10⁴ cfu mL^-1, which is three orders of magnitude lower than of the MPBA-AuNPs-based colorimetric assays. The proposed photothermal method provided a universal platform for rapid and portable detection of broad-spectrum bacteria strains in real samples.

Dual-mode immunoassay for diethylstilbestrol based on peroxidase activity and photothermal effect of black phosphorus-gold nanoparticle nanohybrids

Nanozyme-mediated 3,3',5,5'-tetramethylbenzidine (TMB) - H₂O₂ systems have spawned the establishment of multiple colorimetric sensing platforms that are effective but sometimes subject to low sensitivity. Taking temperature as the output signal, photothermal effects lead to new strategies for sensitive detection. In this paper, a colorimetric and photothermal dual-mode immunoassay for diethylstilbestrol (DES) was constructed. It is based on the oxidation reaction of TMB catalyzed by black phosphorus-gold nanoparticle (BP/Au) nanohybrids, and the kinetics as well as catalytic mechanism of the nanohybrids were investigated in detail for the first time. Herein, the nanohybrids playcatalytic and photothermal dual roles. Moreover, the one-electron oxidation product of TMB (oxidized TMB) not only acts as chromogenic agent but also an excellent NIR laser-driven photothermal agent. The temperature (ΔT/°C) was gauged by a portable digital thermometer. Through an indirect competition strategy, a simple, sensitive, and economic immunosensor was proposed. Higher DES content in the sample correlated with less BP/Au nanohybrids conjugated to the surface of ELISA microplate, a weaker color change, and a lower temperature variation when exposed to laser irradiation. This method was applied for DES determination in real samples with gratifying recovery rates, showing great promise in food safety inspection applications.

Photothermal immunoassay for carcinoembryonic antigen based on the inhibition of cysteine-induced aggregation of gold nanoparticles by copper ion using a common thermometer as readout

The dispersed gold nanoparticles (AuNPs) have weak photothermal effect in near-infrared (NIR) region. After the addition of cysteine, the AuNPs are aggregated due to the electrostatic interaction and then exhibited strong photothermal effect. At present of copper ion (Cu²⁺), the cysteine was catalytically oxidized into cystine, leading to the inhibition of the aggregation of AuNPs and the photothermal effect decreased. Based on this, a simple photothermal assay can be developed for Cu²⁺ detection using a common thermometer as readout. The change of the temperature (ΔT) of the system has a linear relationship with Cu²⁺ in the range of 10-300 nM with a detection limit of 7.4 nM (S/N = 3). Furthermore, through labeling the detection antibody in immunoassay with CuO nanoparticles as the source of Cu²⁺, a convenient photothermal immunoassay can be developed. Carcinoembryonic antigen (CEA), an important biomarker for cancer screening, was chosen as the model target because the rise of CEA level is widely present in cancer blood serum. Under the optimized conditions, ΔT has a linear relationship with CEA concentration in the range of 3.0-48.0 ng/mL. The detection limit is 1.3 ng/mL. The proposed method had been applied to detect CEA in serum samples with good agreement with the reference method used in hospital.

Quantitative gold nanorods based photothermal biosensor for glucose using a thermometer as readout

To meet the increasing need for point-of-care testing (POCT), simple and portable readout strategies would be highly desirable. Thermometer with high accuracy and straightforward readout is an ideal tool for the development of new POCT methods. The exploration of new thermometer-based detection methods is of great significance. In this study, a simple biosensor for glucose based on the photothermal effect of gold nanorods using a simple thermometer as readout has been developed. In the presence of glucose oxidase, glucose can react with the dissolved oxygen to produce H₂O₂. With the help of Fe²⁺, H₂O₂ can etch gold nanorods (AuNRs) to different aspect ratios. The decrease of the aspect ratio of AuNRs leads to the blue-shift of the localized surface plasmon resonance peak, resulting in a decrease of photothermal effect in the near-infrared regions and the temperature of the system decreased. The change of the temperature has a linear relationship with the logarithm of glucose concentration in the range of 1.0-10.0 mM with a detection limit of 0.8 mM. The proposed method possesses a bias offset of -0.03 mM for glucose detection compared to the hospital method. Since many enzymatic reactions can produce H₂O₂, the principle can be modified to detect different targets by simply change of the enzyme used.

Portable and quantitative detection of carbendazim based on the readout of a thermometer

The detection of carbendazim (CBZ) is important for food safety and human health. However, most current analytical methods require large instruments and highly trained operators. In order to solve this problem, herein, an innovative portable and quantitative photothermal assay platform relying on a thermometer readout for the detection of CBZ has been developed. Gold nanoparticles (AuNPs), which exhibit a strong distance-dependent photothermal effect under specific laser irradiation, were utilized as indicators. The CBZ aptamer was introduced to protect AuNPs from salt-mediated aggregation. When CBZ is present, the binding event between CBZ and aptamer leads to the loss of the aptamer protective effect on AuNPs, and AuNP aggregation occurs. Under 650-nm laser irradiation, the increase in temperature associated with an AuNP-dependent photothermal effect is highly related to the CBZ concentration. Having the advantages of user-friendliness, low cost, quick response, and portability, this method has great potential for on-site applications.

Ultrasensitive visual detection of Hg2+ ions via the Tyndall effect of gold nanoparticles

This work describes a new nanosensor for one-step ultrasensitive naked-eye detection of Hg²⁺ ions based on the target-triggered aggregation of gold nanoparticles showing a dramatically enhanced Tyndall effect.

Sensitive biosensor for p53 DNA sequence based on the photothermal effect of gold nanoparticles and the signal amplification of locked nucleic acid functionalized DNA walkers using a thermometer as readout

A convenient photothermal biosensor was constructed for p53 DNA sequence detection based on the high discrimination capability of locked nucleic acid and high efficiency of signal amplification strategy of DNA walkers and difference photothermal effect between aggregated and dispersed gold nanoparticles (AuNPs). The presence of target activated the DNA walkers via the high affinity between target and complementary locked nucleic acid in the probe strand, resulting in the hybridization of the walker strand and substrate strand to form a specific enzyme recognition site. Under the cleavage of the endonuclease, single-stranded DNA (ssDNA) was released to the solution. Then the walker strand bound to a new substrate strand, and the next round of cleavage was triggered. The released ssDNA enhanced the stability of AuNPs against salt-induced aggregation. Given difference photothermal effects of the aggregated AuNPs and dispersed AuNPs under the near-infrared laser, the change of the temperature was detected by a common thermometer easily, which had a linear relationship with the target concentration in the range of 2.0-120.0 pM, the detection limit was 1.4 pM (S/N = 3). The proposed photothermal assay has been applied to detect p53 DNA sequence spiked complex samples with satisfying results.