A micropillar-based microfluidic viscometer for Newtonian and non-Newtonian fluids

A dual-lock-controlled mitochondria-targeted ratiometric fluorescence probe for simultaneous detection of atherosclerosis-related HClO and viscosity

Precise detection of inflammatory microenvironment-related viscosity and hypochlorous acid (HClO) contributes to illuminating the pathogenesis and further diagnosing of atherosclerosis (AS). Herein, a dual-lock-controlled mitochondria-targeted fluorescence probe (NS) for simultaneous imaging of HClO and viscosity in AS-related foam cells is presented. NS performs linear increase in green-fluorescence along with increased viscosity (excited at 425 nm), permitting "off-on" fluorescence imaging of viscosity. Meanwhile, upon HClO activation, NS exhibits red-shifted and enhanced fluorescence in orange, thus leading to ratiometric fluorescence quantification of HClO (excited at 465 nm). Such dual-lock-controlled effect makes NS realize simultaneous imaging of viscosity and HClO with high sensitivity and selectivity via "off-on" and ratiometric fluorescence readouts, respectively. Besides, endowed with mitochondria-targeting capacity, NS achieves in situ imaging of mitochondria viscosity and HClO in living RAW264.7 cells. Importantly, for the first time, NS realizes simultaneous imaging of mitochondria viscosity and HClO in macrophage-derived foam cells, revealing the close association between HClO level and viscosity change in mitochondria during foaming translation of macrophages in atherogenesis. This work not only provides a novel strategy and tool to image organelle-located viscosity and HClO in living systems, but also holds great potential in early diagnosis of AS.

Optimizing Sensitivity in a Fluid-Structure Interaction-Based Microfluidic Viscometer: A Multiphysics Simulation Study

Fluid-structure interactions (FSI) are used in a variety of sensors based on micro- and nanotechnology to detect and measure changes in pressure, flow, and viscosity of fluids. These sensors typically consist of a flexible structure that deforms in response to the fluid flow and generates an electrical, optical, or mechanical signal that can be measured. FSI-based sensors have recently been utilized in applications such as biomedical devices, environmental monitoring, and aerospace engineering, where the accurate measurement of fluid properties is critical to ensure performance and safety. In this work, multiphysics models are employed to identify and study parameters that affect the performance of an FSI-based microfluidic viscometer that measures the viscosity of Newtonian and non-Newtonian fluids using the deflection of flexible micropillars. Specifically, we studied the impact of geometric parameters such as pillar diameter and height, aspect ratio of the pillars, pillar spacing, and the distance between the pillars and the channel walls. Our study provides design guidelines to adjust the sensitivity of the viscometer toward specific applications. Overall, this highly sensitive microfluidic sensor can be integrated into complex systems and provide real-time monitoring of fluid viscosity.

Actuation-enhanced multifunctional sensing and information recognition by magnetic artificial cilia arrays

Artificial cilia integrating both actuation and sensing functions allow simultaneously sensing environmental properties and manipulating fluids in situ, which are promising for environment monitoring and fluidic applications. However, existing artificial cilia have limited ability to sense environmental cues in fluid flows that have versatile information encoded. This limits their potential to work in complex and dynamic fluid-filled environments. Here, we propose a generic actuation-enhanced sensing mechanism to sense complex environmental cues through the active interaction between artificial cilia and the surrounding fluidic environments. The proposed mechanism is based on fluid-cilia interaction by integrating soft robotic artificial cilia with flexible sensors. With a machine learning-based approach, complex environmental cues such as liquid viscosity, environment boundaries, and distributed fluid flows of a wide range of velocities can be sensed, which is beyond the capability of existing artificial cilia. As a proof of concept, we implement this mechanism on magnetically actuated cilia with integrated laser-induced graphene-based sensors and demonstrate sensing fluid apparent viscosity, environment boundaries, and fluid flow speed with a reconfigurable sensitivity and range. The same principle could be potentially applied to other soft robotic systems integrating other actuation and sensing modalities for diverse environmental and fluidic applications.

Numerical Analysis of Droplet Impacting on an Immiscible Liquid via Three-Phase Field Method

In this work, we establish a two-dimensional axisymmetric simulation model to numerically study the impacting behaviors between oil droplets and an immiscible aqueous solution based on the three-phase field method. The numerical model is established by using the commercial software of COMSOL Multiphysics first and then validated by comparing the numerical results with the previous experimental study. The simulation results show that under the impact of oil droplets, a crater will form on the surface of the aqueous solution, which firstly expands and then collapses with the transfer and dissipation of kinetic energy of this three-phase system. As for the droplet, it flattens, spreads, stretches, or immerses on the crater surface and finally achieves an equilibrium state at the gas-liquid interface after experiencing several sinking-bouncing circles. The impacting velocity, fluid density, viscosity, interfacial tension, droplet size, and the property of non-Newtonian fluids all play important roles in the impact between oil droplets and aqueous solution. The conclusions can help to cognize the mechanism of droplet impact on an immiscible fluid and provide useful guidelines for those applications concerning droplet impact.

Microfluidic techniques for mechanical measurements of biological samples

The use of microfluidics to make mechanical property measurements is increasingly common. Fabrication of microfluidic devices has enabled various types of flow control and sensor integration at micrometer length scales to interrogate biological materials. For rheological measurements of biofluids, the small length scales are well suited to reach high rates, and measurements can be made on droplet-sized samples. The control of flow fields, constrictions, and external fields can be used in microfluidics to make mechanical measurements of individual bioparticle properties, often at high sampling rates for high-throughput measurements. Microfluidics also enables the measurement of bio-surfaces, such as the elasticity and permeability properties of layers of cells cultured in microfluidic devices. Recent progress on these topics is reviewed, and future directions are discussed.

Biomechanical Assessment of Red Blood Cells in Pulsatile Blood Flows

As rheological properties are substantially influenced by red blood cells (RBCs) and plasma, the separation of their individual contributions in blood is essential. The estimation of multiple rheological factors is a critical issue for effective early detection of diseases. In this study, three rheological properties (i.e., viscoelasticity, RBC aggregation, and blood junction pressure) are measured by analyzing the blood velocity and image intensity in a microfluidic device. Using a single syringe pump, the blood flow rate sets to a pulsatile flow pattern (Q_b[t] = 1 + 0.5 sin(2πt/240) mL/h). Based on the discrete fluidic circuit model, the analytical formula of the time constant (λ_b) as viscoelasticity is derived and obtained at specific time intervals by analyzing the pulsatile blood velocity. To obtain RBC aggregation by reducing blood velocity substantially, an air compliance unit (ACU) is used to connect polyethylene tubing (i.d. = 250 µm, length = 150 mm) to the blood channel in parallel. The RBC aggregation index (AI) is obtained by analyzing the microscopic image intensity. The blood junction pressure (β) is obtained by integrating the blood velocity within the ACU. As a demonstration, the present method is then applied to detect either RBC-aggregated blood with different concentrations of dextran solution or hardened blood with thermally shocked RBCs. Thus, it can be concluded that the present method has the ability to consistently detect differences in diluent or RBCs in terms of three rheological properties.

Effects of Liquid Viscosity on the Formation and Attenuation of Capillary Waves Induced by AC Electrowetting-on-Dielectric

The capillary waves induced by electrowetting-on-dielectric have great potential in terms of capillary propulsion and other applications. At present, these applications are limited by a lack of research on the effects of liquid viscosity, which is an important parameter in controlling this phenomenon. This paper examines the formation, propagation, and attenuation of electrowetting-on-dielectric-induced capillary waves (EWCWs) on a liquid-free surface with different levels of liquid viscosity. The formation and propagation of the capillary waves are visualized using a high-speed camera and a free-surface synthetic Schlieren method. A theoretical model is established to describe the wave amplitude and wave propagation of EWCWs. The results show that the liquid viscosity, as well as the surface tension, significantly affects the formation and propagation of EWCWs. Using the results presented in this paper, a new type of Stokes viscometer based on EWCWs is proposed, enabling accurate measurements of liquid viscosity over a wide range of viscosity and temperature conditions.

Fluid Viscosity Measurement by Means of Secondary Flow in a Curved Channel

This article presents a new approach to determining the viscosity of Newtonian fluid. The approach is based on the analysis of the secondary Dean flow in a curved channel. The study of the flow patterns of water and aqueous solutions of glycerin in a microfluidic chip with a U-microchannel was carried out. The advantages of a microfluidic viscometer based on a secondary Dean flow are its simplicity, quickness, and high accuracy in determining the viscosity coefficient of a liquid. A viscosity image in a short movie represents fluid properties. It is revealed that the viscosity coefficient can be determined by the dependence of the recirculation angle of the secondary Dean flow. The article provides a correlation between the Dean number and the flow recirculation angle. The results of the field experiment, presented in the article, correlate with the data obtained using computational fluid dynamics and allow for selecting parameters to create microfluidic viscometers with a U-shaped microchannel.

A Review of Microfluidic Devices for Rheological Characterisation

The rheological characterisation of liquids finds application in several fields ranging from industrial production to the medical practice. Conventional rheometers are the gold standard for the rheological characterisation; however, they are affected by several limitations, including high costs, large volumes required and difficult integration to other systems. By contrast, microfluidic devices emerged as inexpensive platforms, requiring a little sample to operate and fashioning a very easy integration into other systems. Such advantages have prompted the development of microfluidic devices to measure rheological properties such as viscosity and longest relaxation time, using a finger-prick of volumes. This review highlights some of the microfluidic platforms introduced so far, describing their advantages and limitations, while also offering some prospective for future works.

PDMS Microfabrication and Design for Microfluidics and Sustainable Energy Application: Review

The polydimethylsiloxane (PDMS) is popular for wide application in various fields of microfluidics, microneedles, biology, medicine, chemistry, optics, electronics, architecture, and emerging sustainable energy due to the intrinsic non-toxic, transparent, flexible, stretchable, biocompatible, hydrophobic, insulating, and negative triboelectric properties that meet different requirements. For example, the flexibility, biocompatibility, non-toxicity, good stability, and high transparency make PDMS a good candidate for the material selection of microfluidics, microneedles, biomedical, and chemistry microchips as well as for optical examination and wearable electronics. However, the hydrophobic surface and post-surface-treatment hydrophobic recovery impede the development of self-driven capillary microchips. How to develop a long-term hydrophilicity treatment for PDMS is crucial for capillary-driven microfluidics-based application. The dual-tone PDMS-to-PDMS casting for concave-and-convex microstructure without stiction is important for simplifying the process integration. The emerging triboelectric nanogenerator (TENG) uses the transparent flexible PDMS as the high negative triboelectric material to make friction with metals or other positive-triboelectric material for harvesting sustainably mechanical energy. The morphology of PDMS is related to TENG performance. This review will address the above issues in terms of PDMS microfabrication and design for the efficient micromixer, microreactor, capillary pump, microneedles, and TENG for more practical applications in the future.