Determination of hydrogen peroxide released from cancer cells by a Fe-Organic framework/horseradish peroxidase-modified electrode

Quantum Dot/TiO2 Nanocomposite-Based Photoelectrochemical Sensor for Enhanced H2O2 Detection Applied for Cell Monitoring and Visualization

This work exploits the possibility of using CdSe/ZnS quantum dot (QD)-electrodes to monitor the metabolism of living cells based on photoelectrochemical (PEC) measurements. To realize that, the PEC setup is improved with respect to an enhanced photocurrent signal, better stability, and an increased signal-to-noise ratio, but also for a better biocompatibility of the sensor surface on which cells have been grown. To achieve this, a QD-TiO2 heterojunction is introduced with the help of atomic layer deposition (ALD). The heterojunction reduces the charge carrier recombination inside the semiconductor nanoparticles and improves the drift behavior. The PEC performance is carefully analyzed by adjusting the TiO2 thickness and combining this strategy with multilayer immobilizations of QDs. The optimal thickness of this coating is ≈5 nm; here, photocurrent generation can be enhanced significantly (e.g., for a single QD layer electrode by more than one order of magnitude at 0 V vs Ag/AgCl). The resulting optimized electrode is used for hydrogen peroxide (H2O2) sensing with a good sensitivity down to µmolar concentrations, reusability, stability, response rate, and repeatability. Finally, the sensing system is applied to monitor the activity of cells directly grown on top of the electrode surface.

A new strategy to build electrochemical enzymatic biosensors using a nanohybrid material based on carbon nanotubes and a rationally designed schiff base containing boronic acid

We report a nanohybrid material obtained by non-covalent functionalization of multi-walled carbon nanotubes (MWCNTs) with the new ligand (((1E,1'E)-(naphthalene-2,3-diylbis(azaneylylidene))bis(methaneylylidenedene)) bis(4-hydroxy-3,1-phenylene))diboronic acid (SB-dBA), rationally designed to mimic some recognition properties of biomolecules like concanavalin A, for the development of electrochemical biosensors based on the use of glycobiomolecules as biorecognition element. We present, as a proof-of-concept, a hydrogen peroxide biosensor obtained by anchoring horseradish peroxidase (HRP) at a glassy carbon electrode (GCE) modified with the nanohybrid prepared by sonication of 2.0 mg mL-1 MWCNTs and 0.50 mg mL-1 SB-dBA in N,N-dimethyl formamide (DMF) for 30 min. The hydrogen peroxide biosensing was performed at -0.050 V in the presence of 5.0 × 10-4 M hydroquinone. The analytical characteristics of the resulting biosensor are the following: linear range between 0.175 μM and 6.12 μM, detection limit of 58 nM, and reproducibility of 2.0 % using the same nanohybrid (6 biosensors), and 9.0 % using three different nanohybrids. The sensor was successfully used to quantify hydrogen peroxide in enriched milk and human blood serum samples and in a commercial disinfector.

Peroxidase-encapsulated Zn/Co-zeolite imidazole framework nanosheets on ZnCoO nanowire array for detecting H2O2 derived from mitochondrial superoxide anion

In this work, we have developed a nanocomposite consisting of horseradish peroxidase (HRP)-encapsulated 2D Zn-Co zeolite imidazole framework (ZIF) nanosheets strung on a ZnCoO nanowire array on a Ti support (denoted as 2D-Zn/Co-ZIF(HRP)|ZnCoO|Ti). This nanocomposite was then applied to constructing an electrochemical biosensor for detecting H2O2 derived from O2∙- released by mitochondria in living cells. This sensing platform shows excellent catalytic performance towards H2O2, attributable to the enzyme/metal-catalytic effect of HRP and Zn/Co-ZIF. The unique nano-string structure alleviates the aggregation of Zn/Co-ZIF nanosheets, readily exposes the catalytic active sites, protects the bioactivity of HRP, and reduces the charge/mass transfer pathway within Zn/Co-ZIF. The 2D-Zn/Co-ZIF(HRP)|ZnCoO|Ti biosensor offers two linear ranges of 0.2-10 μ M and 10-1100 μ M, a limit of detection of 0.082 μ M, a sensitivity of 3.3 mA mM-1 cm-2, good selectivity and stability over 40 days for H2O2 detection. After treating with specific mitochondrial complex inhibitors, the chronoamperometric results at the 2D-Zn/Co-ZIF(HRP)|ZnCoO|Ti confirmed complex I and III within the mitochondria electron transfer chain as the main electron leakage sites. This biosensor may contribute to the development of diagnostic health-care devices that shed light on the precaution and even treatment of oxidative stress diseases.

Dual-monomer molecularly imprinted electrochemical sensor based on amino-functionalized MOFs and graphene for trace determination of taurine

A molecularly imprinted electrochemical sensor (MIECS) for trace determination of taurine was developed. The sensor was constructed by electropolymerizing dopamine and o-phenylenediamine as dual monomers on the surface of amino-functionalized iron-based MOFs and graphene composite-modified electrode. The porous structure and large specific surface area of amino-functionalized iron-based MOFs not only increase the number of imprinted sites, but also facilitate the binding of molecularly imprinted films. The presence of dual monomers can increase the binding sites during the formation of imprinted films. The linear range of this sensor for taurine detection is 1.00 × 10^-14-1.00 × 10^-8 mol L^-1 with a determination limit of 3.20 × 10^-15 mol L^-1. The proposed MIECS was successfully applied to quantify the amount of taurine in human serum sample with good recovery values from 97.3 to 113%.

Electrochemical Enzyme Sensor Based on the Two-Dimensional Metal-Organic Layers Supported Horseradish Peroxidase

Metal-organic frames (MOFs) have recently been used to support redox enzymes for highly sensitive and selective chemical sensors for small biomolecules such as oxygen (O₂), hydrogen peroxide (H₂O₂), etc. However, most MOFs are insulative and their three-dimensional (3D) porous structures hinder the electron transfer pathway between the current collector and the redox enzyme molecules. In order to facilitate electron transfer, here we adopt two-dimensional (2D) metal-organic layers (MOLs) to support the HRP molecules in the detection of H₂O₂. The correlation between the current response and the H₂O₂ concentration presents a linear range from 7.5 μM to 1500 μM with a detection limit of 0.87 μM (S/N = 3). The sensitivity, reproducibility, and stability of the enzyme sensor are promoted due to the facilitated electron transfer.

Fabrication of a Heterojunction by Coupling a Metal-Organic Framework and N-Doped Carbon for the Photocatalytic Removal of Antibiotic Drugs with High Efficiency

Norfloxacin (NOR) and tetracycline (TC), two widely used antibiotic drugs released to the aquatic environment, induce harm to ecosystems. In this study, an effective method was developed successfully to remove NOR and TC by photocatalysis with a novel heterojunction NC/NH₂-MIL-53(Fe), which was fabricated by combining a metal-organic framework (MOF) material (NH₂-MIL-53(Fe)) and N-doped carbon (NC) nanoparticles via a facile solvent thermal method. The prepared product exhibits outstanding photocatalytic efficiencies toward degradation of NOR and TC that are 15 and 6 times higher than those of pure NH₂-MIL-53(Fe), respectively. Moreover, it is higher than those of the related materials reported previously. The greatly enhanced photocatalytic performance is assigned to the fabricated heterojunction with well-matched energy band gaps, where the NC acts as an efficient electron transfer/reservoir material to effectively promote the migration and transfer and restrain the recombination of charge carriers. In addition, the formed heterojunction increases specific surface area and light absorbance. The photocatalytic activity enhanced mechanism, degradation products, and pathway were investigated. The present study offers a novel strategy to significantly improve the photocatalytic performances of MOFs for highly efficient photocatalytic removal of antibiotic drugs in wastewater.

Electrochemical Sensors for the Detection of Reactive Oxygen Species in Biological Systems: A Critical Review

Reactive oxygen species (ROS) involving superoxide anion, hydrogen peroxide and hydroxyl radical play important role in human health. ROS are known to be the markers of oxidative stress associated with different pathologies including neurodegenerative and cardiovascular diseases, as well as cancer. Accordingly, ROS level detection in biological systems is an essential problem for biomedical and analytical research. Electrochemical methods seem to have promising prospects in ROS determination due to their high sensitivity, rapidity, and simple equipment. This review demonstrates application of modern electrochemical sensors for ROS detection in biological objects (e.g., cell lines and body fluids) over a decade between 2011 and 2021. Particular attention is paid to sensors materials and various types of modifiers for ROS selective detection. Moreover, the sensors comparative characteristics, their main advantages, disadvantages and their possibilities and limitations are discussed.

Horseradish peroxidase-repeat assay based on tyramine signal amplification for highly sensitive H2O2 detection by surface-enhanced Raman scattering

A new and simple surface-enhanced Raman scattering (SERS) biosensor based on the tyramine signal amplification (TSA)-triggered formation of horseradish peroxidase (HRP) repeats on a gold sensing chip was designed for the highly sensitive detection of hydrogen peroxide (H₂O₂). Initially, gold wafers were functionalized with HRP as sensing chips. Then, the HRP immobilized on the chips triggers the TSA reaction to transform the tyramine-HRP conjugate into a tyramine-HRP repeat array. With the aid of the target H₂O₂, the HRP repeats catalyze the oxidation of o-phenylenediamine (OPD) and produce an enzyme catalytic product with a different chemical structure, thus altering the fingerprint of the SERS spectra from that of OPD. H₂O₂ can be quantitatively analyzed according to the change in SERS signal intensity. On the basis of the TSA strategy, the proposed method allows the detection of H₂O₂ with a limit of detection (LOD) of 0.8 × 10^-8 M. The as-prepared SERS sensor can achieve high-sensitivity H₂O₂ detection with a small amount of sample for each analysis. Therefore, this sensor exhibits significant potential for application in bioanalysis.

Molecularly imprinted photoelectrochemical sensor for detecting tetrabromobisphenol A in indoor dust and water

The gradual emissions of tetrabromobisphenol A (TBBPA) from the primitive recycling of E-waste create human health threats, which urgently require to develop an efficient, rapid yet simple detection method. The present study conducts a highly sensitive molecularly imprinted photoelectrochemical sensor (MIPES) containing molecularly imprinted (MI)-TiO₂, Au, and reduced graphene oxide for the trace detection of TBBPA in indoor dust and surface water from an E-waste recycling area. The photocurrent response is used to evaluate the sensing performance of the MIPES toward TBBPA detection. The working potential for amperometry is 0.48 V. The wavelength range for photoelectrochemical detection is 320-780 nm. The sensor shows a detection range of 1.68 to 100 nM with a low limit of detection of 0.51 nM (LOD = 3 s_b/S) and a limit of quantification of 1.68 nM (LOQ = 3.3 LOD). In addition, the MIPES sensor exhibits rapid, excellent reproducibility, selectivity, and long-term stability toward TBBPA detection. The relative standard deviation of three measurements for real samples is less than 7.0%, and the recovery range is 90.0-115%. The surface of molecular imprinting contributes to the high charge separation and sensing photocurrent response of TBBPA, which is confirmed by single-particle photoluminescence spectroscopy. The present study provides a new facile sensor with highly sensitive yet rapid response to detect environmental pollutants in E-waste by using the MIPES.

An electrochemical method for the sensitive and rapid sensing of Sudan I in food based on Ni–Fe bimetal organic frameworks

A Ni–Fe bimetal organic framework-modified electrode was constructed for the sensitive and rapid sensing of Sudan I in food.

Electrochemical determination of artemisinin based on signal inhibition for the reduction of hemin

A novel electrochemical sensor was constructed for the determination of artemisinin (ART) based on the inhibition of redox for hemin caused by ART. As far as we know, this strategy for ART determination may be proposed for the first time. In this work, untreated multi-walled carbon nanotubes were cast on the glassy carbon electrode (GCE) as conductive carrier. We prepared a bimetallic organic framework named FeGd-MOF and combined it with hemin by a simple physical mixed method. Then, we fabricated the working electrode by layer-by-layer modification and immobilization. The sensor measured by the differential pulse voltammetry (DPV) technique had calibration curves for the determination of ART, which was 0.3-350 μM with the correlation coefficient R² = 0.9998. Furthermore, the obtained linear range could be practically used in real sample analysis such as dried leaves of Artemisia apiacea. Under the optimized condition, the electrochemical sensor exhibited high sensitivity, good stability, and excellent anti-interference performance. The limit of detection (LOD) for this sensor was 0.17 μM (signal to noise ratio, S/N = 3), which was much lower than that for some other reported electrochemical sensors. The recovery rates were in the range of 99.54-104.34% in real samples, indicating that the sensor had good repetition and high accuracy. Graphical abstract.