Simultaneous determination of multiple phytohormones in tomato by ionic liquid-functionalized carbon fibers-based solid-phase microextraction coupled with liquid chromatography-mass spectrometry

Chemical bonding of cross-linked glutaraldehyde/chitosan on the surface of a titanium wire to prepare a robust biocompatible SPME fiber for analysis of phytohormones in plants

A robust biocompatible solid-phase microextraction (SPME) fiber, so-called Ti/APTS/GA/CS, was prepared by chemical bonding of cross-linked glutaraldehyde-chitosan to the surface of a titanium wire using APTS. The fiber was applied for sampling of phytohormones in plant tissues, followed by HPLC-UV analysis. The structure and morphology of the fiber coating was investigated by FT-IR, SEM, EDX, XRD, and TGA techniques. A Box-Behnken design was implemented to optimize the experimental variables. The calibration graphs were linear over a wide linear range (0.5-200 μg L-1) with LODs over the range of 0.01-0.06 μg L-1. The intra-day and inter-day precisions were found to be 1.3-6.3% and 4.3-7.3%, respectively. The matrix effect values ranged from 86.5% to 111.7%, indicating that the complex sample matrices had an insignificant effect on the determination of phytohormones. The fiber was successfully employed for the direct-immersion SPME (DI-SPME-HPLC) analysis of the phytohormones in cucumber, tomato, date palm, and calendula samples.

Specific fractionation of ginsenosides based on activated carbon fibers and online fast screening of ginseng extract by mass spectrometry

Ginseng is beneficial in the prevention of many diseases and provides benefits for proper growth and development owing to the presence of various useful bioactive substances of diverse chemical heterogeneity (e.g., triterpenoid saponins, polysaccharides, volatile oils, and amino acids). As a result, understanding the therapeutic advantages of ginseng requires an in-depth compositional evaluation employing a simple and rapid analytical technique. In this work, three types of surface-activated carbon fibers (ACFs) were prepared by gas-phase oxidation, strong acid treatment, and Plasma treatment to obtain CO2-ACFs, acidified-ACFs, and plasma-ACFs, respectively. Three prepared ACFs were compared in terms of their physicochemical characterization (i.e., surface roughness and functional groups). A separation system was built using a column with modified ACFs, followed by mass spectrometry detection to investigate and determine substances of different polarities. Among the three columns, CO2-ACFs showed the optimum separation effect. 13 strong polar compounds (12 amino acids and1 oligosaccharide) and 15 lesser polar compounds (ginsenosides) were separated and identified successfully within 4 min in the ginseng sample. The data obtained by CO2-ACFs-TOF-MS/MS and UHPLC-TOF-MS/MS were compared. Our approach was found to be faster (4 min vs. 36 min) and greener, requiring much less solvent (1 mL vs. 10.8 mL), and power (0.06 vs. 0.6 kWh). The developed methodology can provide a faster, eco-friendly, and more reliable tool for the high-throughput screening of complex natural matrices and the simultaneous evaluation of several compounds in diverse samples.

Novel ferrofluid based on water-based deep eutectic solvents: application in dispersive liquid-liquid microextraction of naphthalene-derived plant growth regulators in edible oil

A new ferrofluid extractant (Fe3O4 @SiO2-WDES) was ingeniously prepared by coating magnetic Fe3O4 @SiO2 microspheres with water-based deep eutectic solvent (WDES) and used for dispersive liquid-liquid microextraction (DLLME) and HPLC determination of naphthalene-derived plant growth regulators (PGRs, i.e., 1-naphthylacetic acid, 2-naphthylacetic acid, 1-naphthoxy acetic acid, 2-naphthyloxyacetic acid and 1-naphthylacetamide) in edible oil. Herein, mass transfer of the analytes in DLLME was significantly enhanced via increasing the contact surface by employing the microspheres as the supporter and dispersant of WDES, and phase separation can be efficiently achieved using an external magnet rather than centrifugation in traditional DLLME. Response surface methodology (RSM) based on Box-Behnken design (BBD) was employed for the optimization of core experimental conditions, and Analytical Eco-Scale and Analytical GREEnness Metric Approaches were adopted to evaluate the degree of greenness of the procedure. Under the optimal conditions, satisfactory performances of linearity ranged from 5 to 100 μg/L (R2 ≥ 0.9982), limit of detection (0.58-0.91 μg/L), limit of quantitation (1.9-3.0 μg/L), precision (RSDs ≤ 5.5%), recovery (81.3%-108.1%) and negligible matrix effect were achieved, which introduced a promising alternative route for the determination of naphthalene-derived plant growth regulators in edible oil.

A rapid and sensitive ultra-performance liquid chromatography-tandem mass spectrometry method for determination of phytohormones in the medicinal plant saffron

Saffron (Crocus sativus L.) is a valuable Chinese herb with high medicinal value. Saffron pistils are used as medicine, so increasing the number of flowers can increase the yield. Plant hormones have essential roles in the growth and development of saffron, as well as the response to biotic and abiotic stresses (especially in floral initiation), which may directly affect the number of flowers. Quantitative analysis of plant hormones provides a basis for more efficient research on their synthesis, transportation, metabolism, and action. However, starch (which interferes with extraction) is present in high levels, and hormone levels are extremely low, in saffron corms, thereby hampering accurate determination of plant-hormone levels in saffron. Herein, we screened an efficient and convenient pre-treatment method for plant materials containing abundant amounts of starch. Also, we proposed an ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) method for the quantification of abscisic acid (ABA) and auxin (IAA). Then, the method was applied for the detection of hormone-content differences between flowering and non-flowering top buds, as well as between lateral and top buds. Our method showed high sensitivity, reproducibility, and reliability. Specifically, good linearity in the range 2-100 ng ml-1 was achieved in the determination of ABA and IAA, and the correlation coefficient (R2) was >0.9982. The relative standard deviation was 2.956-14.51% (intraday) and 9.57-18.99% (interday), and the recovery range was 89.04-101.1% (n = 9). The matrix effect was 80.38-90.50% (n = 3). The method was thoroughly assessed employing various "green" chemistry evaluation tools: Blue Applicability Grade Index (BAGI), Complementary Green Analytical Procedure Index (Complex GAPI) and Red Green Blue 12 Algorithm (RGB12). These tools revealed the good greenness, analytical performance, applicability, and overall sustainability alignment of our method. Quantitative results showed that, compared with saffron with a flowering phenotype cultivated at 25 °C, the contents of IAA and ABA in the terminal buds of saffron cultivated at 16 °C decreased significantly. When cultivated at 25 °C, the IAA and ABA contents in the terminal buds of saffron were 1.54- and 4.84-times higher than those in the lateral buds, respectively. A simple, rapid, and accurate UPLC-MS/MS method was established to determine IAA and ABA contents. Using this method, a connection between the contents of IAA and ABA and the flowering phenotype was observed in the quantification results. Our data lay a foundation for studying the flowering mechanism of saffron.

Biochar nanosphere-functionalized carbon fibers for in-tube solid-phase microextraction of polycyclic aromatic hydrocarbons in environmental water followed by liquid chromatography and diode array detection

In order to improve the extraction ability of carbon fibers (CFs) for microextraction of polycyclic aromatic hydrocarbons (PAHs), biochar nanospheres derived from glucose were in-situ grown onto the surface of CFs via hydrothermal synthesis. The surface morphology and elemental composition of biochar nanospheres-CFs were investigated by scanning electron microscopy and X-ray photoelectron spectroscopy. Thereafter, the biochar nanosphere-CFs were pulled into the polyetheretherketone tube for solid-phase microextraction, and the tube was combined with high-performance liquid chromatography-diode array detector to online detect PAHs. With the help of π-stacking, hydrophobic, and hydrophilic effect of biochar nanospheres, the extraction efficiency of CFs was greatly enhanced (enrichment factor increased by 293% compared with  the original). The conditions affecting the analytical performance (sampling volume, sampling rate, methanol content, and desorption time) were investigated. Under the optimal conditions, an online analytical method for microextraction and determination of several PAHs was developed, and satisfactory results were achieved. The limits of detection were 0.003-0.010 ng mL-1 owing to high enrichment effect (2973-3600), linearity ranged from  0.010-15.0 ng mL-1, and relative standard deviations were 0.4%-1.6% (intra-day) and 2.4%-4.4% (inter-day), respectively. The method was applied to analyze environmental water samples (rain water, snow water, and river water), and spiked recoveries within 80.0%-119% were obtained.

Recent advances in emerging application of functional materials in sample pretreatment methods for liquid chromatography-mass spectrometry analysis of plant growth regulators: A mini-review

Plant growth regulators (PGRs) are a class of small molecular compounds, which can remarkably affect the physiological process of plants. The complex plant matrix along with a wide polarity range and unstable chemical properties of PGRs hinder their trace analysis. In order to obtain a reliable and accurate result, a sample pretreatment process must be carried out, including eliminating the interference of the matrix effect and pre-concentrating the analytes. In recent years, the research of functional materials in sample pretreatment has experienced rapid growth. This review comprehensively overviews recent development in functional materials covering one-dimensional materials, two-dimensional materials, and three-dimensional materials applied in the pretreatment of PGRs before liquid chromatography-mass spectrometry (LC-MS) analysis. Besides, the advantages and limitations of the above functionalized enrichment materials are discussed, and their future trends have been prospected. The work could be helpful to bring new insights for researchers engaged in functional materials in sample pretreatment of PGRs based on LC-MS.

Synthesis of spindle-like amino-modified Zn/Fe bimetallic metal-organic frameworks as sorbents for dispersive solid-phase extraction and preconcentration of phytohormoes in vegetable samples

Amino-modified Zn/Fe bimetallic metal-organic frameworks (NH₂-Zn/Fe-MIL-88) were synthesized using a one-step solvothermal method with FeCl₃·6H₂O and Zn(NO₃)₂·6H₂O as metal salts and 2-aminoterephthalic acid as organic ligand. The morphology of NH₂-Zn/Fe-MIL-88 can be regulated from octahedral-like to spindle-like with changing molar ratios of metal salts. Using NH₂-Zn/Fe-MIL-88 as sorbent, a dispersive solid-phase extraction with putting sorbents into sample solution to extract targets was developed to preconcentrate phytohormones in vegetables. To study the extraction efficiency, a series of NH₂-Zn/Fe-MIL-88s with varying molar ratios of metal salts were prepared. The results indicated that NH₂-Zn/Fe-MIL-88(1) presented the highest extraction efficiency (82.6 %-98.1 %) to phytohormones among all prepared NH₂-Zn/Fe-MIL-88(x). The limits of detection were calculated at 0.07-0.15 ng/mL. The adsorption isotherms and kinetic parameters of NH₂-Zn/Fe-MIL-88 for phytohormones were conformed to Langmuir and pseudo-second-order models. The NH₂-Zn/Fe-MIL-88 as sorbent combined with HPLC was applied to detect phytohormones in cucumber and tomato samples.

Online micro solid phase extraction coupled with ultra-performance liquid chromatography-tandem mass spectrometry for trace analysis of endogenous plant hormones in Ulva linza

OBJECTIVE

Ulva linza (L.) is a species of green algae widely distributed in China. We aimed to establish a sensitive online analytical method for quantification of endogenous phytohormones in fresh minute seaweed samples.

METHOD

The method for quantification of endogenous plant hormones in fresh minute samples was developed based on a homemade online micro solid phase extraction (m-SPE) system coupled with an ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) platform. The online m-SPE instrument injected the eluent of m-SPE directly onto the LC separation column, improving the utilization of samples and saving time. The m-SPE column, of which the effective size was 9.6 × 2 mm i.d., was filled with 19 mg of C18 (10 μm).

RESULTS

Under optimized conditions, the limits of detection were 0.002-0.060 ng ml^-1 for five plant hormones. The actual sample recoveries of phytohormones were 76.4-103.4% and the coefficients of variance were below 14.1%. The temporal distribution of these endogenous plant hormones of U. linza during different growth periods is described.

CONCLUSION

The proposed online m-SPE method was successfully applied to quantification of endogenous acidic and alkaline plant hormones in U. linza. It provides important information for the further study of the physiological and ecological effects of plant hormones in lower algal species.

[Novel adsorption material for solid phase extraction in sample pretreatment of plant hormones]

植物激素在植物生长过程中具有重要作用,调节植物生长、发育及抗逆的各个过程。植物激素超微精准定量分析一直是植物生理学研究的瓶颈问题。植物激素的准确、高效检测目前大多是基于液相色谱-串联质谱联用技术。样品前处理是植物激素色谱-质谱分析中必不可少的一个步骤,直接影响后续检测方法的灵敏度和准确性。在植物激素各种前处理方法中,固相萃取(SPE)技术应用非常广泛。在萃取小柱基础上发展了多种新形式(分散固相萃取、磁性固相萃取、固相微萃取等,称之为SPE相关方法)。在上述SPE相关方法中,吸附材料的选择均是关键因素,决定了样品前处理过程的目标物提取、净化和富集效果。碳基材料(包括碳纳米管、石墨烯、碳氮化合物等)和有机骨架材料(包括金属有机骨架、共价有机材料)拥有结构可设计、比表面积大、稳定性良好等特性,非常适合作为吸附材料。分子印迹聚合物和超分子化合物依靠主-客体特异性分子识别作用,能显著提高样品前处理方法的选择性。本文重点针对植物激素样品前处理中的SPE技术,综述了近5年来上述几类功能化吸附材料的最新应用进展,并对其发展趋势进行展望。

Novel solid-phase microextraction fiber coatings: A review

The materials used for the fabrication of solid-phase microextraction fiber coatings in the past five years are summarized in the current review, including carbon, metal-organic frameworks, covalent organic frameworks, aerogel, polymer, ionic liquids/poly (ionic liquids), metal oxides, and natural materials. The preparation approaches of different coatings, such as sol-gel technique, in-situ growth, electrodeposition, and glue methods, are briefly reviewed together with the evolution of the supporting substrates. In addition, the limitations of the current coatings and the future development directions of solid-phase microextraction are presented.

A reciprocating magnetic field assisted on-line solid-phase extraction coupled with liquid chromatography-tandem mass spectrometry determination of trace tetracyclines in water

A reciprocating magnetic-field-assisted on-line solid-phase extraction (RMF-SPE) method coupled with liquid chromatography-tandem mass spectrometry (LC-MS/MS) has been developed for continuous enrichment of trace chemicals in water samples. Under the assist of the reciprocating magnetic field, carboxyl-modified magnetic nanoparticles (CMNPs) were applied to prepare microcolumn with even dispersion by periodical motion, instead of traditional compaction as extraction sorbents. When water sample passed through the extraction region, dynamic sorbents generates an advantage of countless contacts between sorbents and targets without blocking for high efficient extraction. In this study, the on-line RMF-SPE method was established and evaluated by determination of tetracyclines (TCs) from water samples as analysis models, including oxytetracycline, tetracycline, demeclocycline, metacycline, chlortetracycline, and doxycycline. Experimental conditions have been investigated such as flow rate, reciprocating speed, elution time, and so on. The method showed high relative recovery (95.4-111.1%) and good repeatability with RSD from 2.9 to 11.8% for the 200 mL water sample. The linearity range, limits of detection (LODs), and limits of quantification (LOQs) were 0.5-200 μg L^-1 (chlortetracycline) and 0.1-200 μg L^-1 (other TCs), 12.0-74.1 ng L^-1, and 40.1-247 ng L^-1, respectively. More importantly, the high enrichment factors in a range of 204 (chlortetracycline) to 276 (demeclocycline) indicate that a small amount of dynamic sorbents (only 10 mg) give full play to extraction attributing to the reciprocating movement, especially for trace analysis and continuous extraction, which is significant for water samples from sea, river and domestic waste.