Nitrogen and phosphorus co-doped porous carbon framework with superior electrochemical activity for naphthol isomers sensing

Graphene/metal-organic framework nano-sandwiches derived N, P-codoped porous carbon nanosheets as robust material for electrochemical analysis

Construction of novel two-dimensional porous carbon nanosheets with superior electrochemical activity is of great challenge. Here, graphene/ZIF-8 nano-sandwiches derived N, P-codoped porous carbon nanosheets (N, P-codoped PCN) was easily obtained by sequential room temperature self-assembly and high-temperature carbonization method. Relative to the widely used physically exfoliated graphene nanosheets (GN) and graphene/ZIF-8 derived N-doped porous carbon nanosheets (N-doped PCN), N, P-codoped PCN displayed larger active surface, faster electron transport ability and stronger physical adsorption ability, which can be ascribed to the dual doping effect of heteroatoms N and P. As a result, N, P-codoped PCN exhibited remarkable oxidation signal enhancement for tumor marker (8-hydroxy-2'-deoxyguanosine), analgesic and antipyretic drug (acetaminophen) and organic pesticide (benomyl). Besides, the limits of detection were measured as low as 1.58 nM, 7.50 nM and 2.10 nM with sensitivity of 270.00 μA μM-1 cm-2, 757.14 μA μM-1 cm-2 and 272.86 μA μM-1 cm-2 for 8-hydroxy-2'-deoxyguanosine, acetaminophen and benomyl, respectively. Basing on this, a novel and highly sensitive electrochemical sensing platform was developed. It is believed that the reported two-dimensional N, P-codoped PCN with unique structure and composition is highly valuable for the development of carbon-based electrochemical sensors.

Hierarchical porous loofah-like carbon with sulfhydryl functionality for electrochemical detection of trace mercury in water

Mercury is a common contaminant found in natural waters, which is highly toxic to human health. Thus, the facile and reliable monitoring of mercury in waters is of great significance. In this study, we fabricated a novel loofah-like hierarchical porous carbon with sulfhydryl functionality (S-LHC), and applied it as an ultrasensitive sensor for the electrochemical detection of mercury in water. The S-LHC was prepared through the direct pyrolysis of a triazole-rich metal-organic framework (MOF), followed by chemical modification using thioglycolic acid. The highly conductive N-doped carbon framework of S-LHC facilitated the electron transfer in mercury electrochemical sensing. Meanwhile, the open hierarchical pore structure and abundant sulfhydryl groups allowed the fast diffusion and effective enrichment of mercury ions. Consequently, the S-LHC sensor exhibited an exceptionally high sensitivity for mercury ions, with the mercury detection limit (0.36 nM) orders of magnitude lower than the regulated values in drinking water (typically 10∼30 nM). The constructed sensor also afforded good anti-interference ability and excellent stability for long-term detection of mercury in a variety of complex real water samples. The present study provides not only a facile method for mercury detection, but also a new idea for the construction of highly sensitive electrochemical sensors.

Facile synthesis of core-shell Co-MOF with hierarchical porosity for enhanced electrochemical detection of furaltadone in aquaculture water

Metal-organic frameworks (MOFs) exhibited huge application potential in electrochemical analysis field, how to facilely and effectively boost the electrochemical sensing activity of MOFs materials still face enormous challenges. In this work, core-shell Co-MOF (Co-TCA@ZIF-67) polyhedrons with hierarchical porosity was easily synthesized via simple chemical etching reaction by selecting thiocyanuric acid as the etching reagent. Benefiting from the introduction of mesopores and thiocyanuric acid/Co²⁺ complex on the surface of ZIF-67 frameworks, the property and functions of the pristine ZIF-67 was seriously tailored. Compared with the pristine ZIF-67, the as-resulted Co-TCA@ZIF-67 nanoparticles displayed greatly enhanced physical adsorption capacity and electrochemical reduction activity toward the antibiotic drug furaltadone. As a result, a novel furaltadone electrochemical sensor with high sensitivity was fabricated. The linear detection range was from 50 nM to 5 μM with sensitivity of 110.40 μA^-1 μM^-1 cm^-2 and detection limit of 12 nM. This work demonstrated chemical etching strategy is truly a facile and effective way to modify the electrochemical sensing performance of MOFs-based materials, and we believed the chemically etched MOFs materials will play a stronger role in terms of food safety and environmental conservation.

Eco-friendly fabrication of nonenzymatic electrochemical sensor based on cobalt/polymelamine/nitrogen-doped graphitic-porous carbon nanohybrid material for glucose monitoring in human blood

The design and development of eco-friendly fabrication of cost-effective electrochemical nonenzymatic biosensors with enhanced sensitivity and selectivity are one of the emerging area in nanomaterial and analytical chemistry. In this aspect, we developed a facile fabrication of tertiary nanocomposite material based on cobalt and polymelamine/nitrogen-doped graphitic porous carbon nanohybrid composite (Co-PM-NDGPC/SPE) for the application as a nonenzymatic electrochemical sensor to quantify glucose in human blood samples. Co-PM-NDGPC/SPE nanocomposite electrode fabrication was achieved using a single-step electrodeposition method under cyclic voltammetry (CV) technique under 1 M NH₄Cl solution at 20 constitutive CV cycles (sweep rate 20 mV/s). Notably, the fabricated nonenzymatic electroactive nanocomposite material exhibited excellent electrocatalytic sensing towards the quantification of glucose in 0.1 M NaOH over a wide concentration range from 0.03 to 1.071 mM with a sensitive limit of detection 7.8 μM. Moreover, the Co-PM-NDGPC nanocomposite electrode with low charge transfer resistance (Rct∼81 Ω) and high ionic diffusion indicates excellent stability, reproducibility, and high sensitivity. The fabricated nanocomposite materials exhibit a commendable sensing response toward glucose molecules present in the blood serum samples recommends its usage in real-time applications.

Electrochemical sensing for naphthol isomers based on the in situ growth of zeolitic imidazole framework-67 on ultrathin CoAl layered double hydroxide nanosheets by a reaction-diffusion technique

It is established that ultrathin layered double hydroxide nanosheets (LDHNS) and zeolitic imidazole frameworks (ZIF) are desirable electrochemical sensing modifiers owing to their large surface area and abundant catalytic sites. Integration of them is thus an effective solution to maximize their electrocatalytic activity. Herein, a novel reaction-diffusion framework (RDF) technique is applied for the in situ growth of ZIF-67 on ultrathin CoAl-LDHNS (CoAl-LDHNS@ZIF-67). In a confined space of the agar gel matrix of RDF, the coordination reaction between organic ligands and CoAl-LDHNS without an additional Co²⁺ source achieves the controllable growth of ZIF-67 crystals through a long vertical diffusion. The prepared composite comprises both CoAl-LDHNS and ZIF-67 components with a certain ratio and provides a large surface area and amply catalytic sites, thus realizing a rapid transfer of electron and mass. The CoAl-LDHNS@ZIF-67 modified electrode is employed for the simultaneous detection of naphthol isomers by differential pulse voltammetry. Naphthol isomers display anodic reactions with a wide peak potential difference, allowing their simultaneous detection feasible. Voltammetric responses of α-naphthol and β-naphthol follow good linearity against the concentration in a wide range from 0.3 to 150 μM with limits of detection of 54 and 82 nM, respectively. The proposed sensor also demonstrates excellent selectivity, stability, reproducibility, and practicability for the simultaneous detection of naphthol isomers.

In-situ synthesis of ultrasmall Au nanoparticles on bimetallic metal-organic framework with enhanced electrochemical activity for estrone sensing

In this work, ultrasmall Au nanoparticles decorated bimetallic metal-organic framework (US Au NPs@AuZn-MOF) hybrids were facilely prepared by a sequential ion exchange and in-situ chemical reduction strategy. Numerous of Au nanoparticles with size less than 5 nm was homogeneously dispersed on the surface of the whole bimetallic AuZn-MOF polyhedrons. The integration of ultrasmall Au nanoparticles greatly enhanced the electron transfer capacity and electrochemical active surface area of the metal-organic framework host. Compared with the pristine Zn-MOF, bimetallic AuZn-MOF, the as-synthesized US Au NPs@AuZn-MOF hybrids exhibited remarkably promoted electrochemical activity toward the oxidation and sensing of endocrine-disrupting chemical (EDC) estrone. As a result, a highly sensitive electrochemical sensing platform was developed for the detection of estrone in the range of 0.05 μM-5 μM with limit of detection of 12.3 nM (S/N = 3) and sensitivity of 101.3 μA^-1 μM^-1 cm^-2. Considering the structural diversity of MOFs and superior property of ultrasmall Au nanoparticles, the strategy proposed here may open a new avenue for the design and synthesis of other high-activity nanomaterials for electrochemical sensing or other challenging fields.