Rational designing an azo colorimetric sensor with high selectivity and sensitivity for uranium environmental monitoring

Advanced "turn-on" colorimetric uranium platform based on the enhanced nanozyme activity of a donor-acceptor structured covalent organic framework

BACKGROUND

The increasing uranium containing wastes generated during uranium mining and finishing pose a huge threat to the environment and human health, and thus robust strategies for on-site monitoring of uranium pollutant are of great significance for environmental protection around uranium tailings.

RESULTS

Herein, a facile "turn-on" colorimetric platform that can achieve uranium detection by spectrometry and naked eyes was developed based on the uranium-enhanced nanozyme activity of covalent organic framework (JUC-505). Thanks to the extended π-conjugated skeleton and donor-acceptor (D-A) structure, JUC-505 exhibited superior photo-activated nanozyme activity, which would be prohibited when the cyano group in JUC-505 skeleton was transformed to the amidoxime group. Further results elucidated that the coordination of uranium with amidoxime groups led to the electron transfer between uranium and the JUC-505-AO skeleton, and thus significantly restored the nanozymatic activity of JUC-505-AO with the subsequent remarkable color changes. Moreover, the uranium concentrations in uranium tailing wastewater detected by the present "turn-on" colorimetric method were well agreed with those by ICP-MS, demonstrating a high accuracy of the present method in real samples.

SIGNIFICANCE

The D-A structured JUC-505 with superior photocatalytic property and nanozymatic activity was applied to facilitate colorimetric detection of uranium, which displays the advantages of low detection limit, excellent selectivity, fast response and simple operation for uranium detection in real samples, and shows a great potential in on-site monitoring of uranium pollutant around uranium tailings as well as nuclear power plant.

Enhancement of CdS resistance to photocorrosion and photocatalytic removal of uranyl by complexation with N-deficient g-C3N4under aerobic conditions

The effect of oxygen on the reduction of uranyl and photocorrosion of CdS remains a pressing issue when CdS is used as a photocatalyst for the removal of uranyl in uranium-containing wastewater. In this study, composites (CdS/PCN) were prepared by designing N-deficient g-C₃N₄ composite with CdS for efficient photocatalytic reduction of uranyl under aerobic condition. Meanwhile, a series of characterizations of the CdS/PCN composites were carried out by XRD, FT-IR, XPS, EDS and UV-vis. Surprisingly, the CdS/PCN not only showed very high photocatalytic reduction activity for uranyl under aerobic condition, but also the photocorrosion of CdS by oxygen and h⁺ was inhibited. With a starting uranium (VI) concentration of 20 ppm, the uranium (VI) removal efficiency could reach 97.33% (dark: 30 min, light: 10 min). Interestingly, the removal efficiency was better in air condition than in pure nitrogen or 30% oxygen atmosphere, i.e. a proper amount of oxygen has accelerated the reduction reaction, while excess oxygen weakened the reduction. Finally, a new mechanism of reduction of uranyl by CdS/PCN photocatalyst was given under aerobic condit ions. This work presents a novel strategy for reduction of U(VI) by photocatalysis and the inhibition of photocorrosion of photocatalysts under aerobic conditions.

Threonine Phosphorylation of an Electrochemical Peptide-Based Sensor to Achieve Improved Uranyl Ion Binding Affinity

We have successfully designed a uranyl ion (U(VI)-specific peptide and used it in the fabrication of an electrochemical sensor. The 12-amino acid peptide sequence, (n) DKDGDGYIpTAAE (c), originates from calmodulin, a Ca(II)-binding protein, and contains a phosphothreonine that enhances the sequence's affinity for U(VI) over Ca(II). The sensing mechanism of this U(VI) sensor is similar to other electrochemical peptide-based sensors, which relies on the change in the flexibility of the peptide probe upon interacting with the target. The sensor was systematically characterized using alternating current voltammetry (ACV) and cyclic voltammetry. Its limit of detection was 50 nM, which is lower than the United States Environmental Protection Agency maximum contaminant level for uranium. The signal saturation time was ~40 min. In addition, it showed minimal cross-reactivity when tested against nine different metal ions, including Ca(II), Mg(II), Pb(II), Hg(II), Cu(II), Fe(II), Zn(II), Cd(II), and Cr(VI). Its reusability and ability to function in diluted aquifer and drinking water samples were further confirmed and validated. The response of the sensor fabricated with the same peptide sequence but with a nonphosphorylated threonine was also analyzed, substantiating the positive effects of threonine phosphorylation on U(VI) binding. This study places emphasis on strategic utilization of non-standard amino acids in the design of metal ion-chelating peptides, which will further diversify the types of peptide recognition elements available for metal ion sensing applications.

Naked-eye colorimetric and turn-on fluorescent Schiff base sensor for cyanide and aluminum (III) detection in food samples and cell imaging applications

A new efficient Schiff base sensor SB3 for fluorescent and colorimetric "naked-eye" "turn-on" sensing of cyanide anion (CN^-) with excellent sensitivity and selectivity was developed. The 4,4'-(perfluoropropane-2,2-diyl)bisphenol group and two phenyl groups were covalently linked by two C = N bonds to extend the conjugation length. The four hydroxyl groups can improve the water solubility of the SB3 sensor. The SB3 sensor exhibited high specificity towards CN^- by interrupting its intramolecular charge transfer, resulting in a color change and remarkable "turn-on" green fluorescence emission. The sensing mechanism is caused by the nucleophilic addition of CN- toward imine groups of the SB3 sensor, leading to breaks of the conjugation, fluorescent spectral changes, and color change. It was confirmed by ¹H NMR titration and Mass spectra. The detection limits for CN^- and Al³⁺obtained by fluorescence spectrum are 0.80 µM and 0.25 µM, respectively. The SB3 sensor can act as an efficient chemical sensor for detecting the CN^- and Al³⁺ ions under common environmental and physiological conditions (pH 5-12). Besides, the sensor can also detect CN^- in food materials (such as sprouting potatoes and cassava flour) and imaging CN^-in living cells with strong "turn-on" fluorescence at 490 nm. SB3 is an excellent CN^- sensor that exhibits some advantages, including easy synthesis, distinct fluorescence and color change, high selectivity, low detection limit, and good anti-interference ability to analyze solution and food samples, together with fluorescence cell imaging.

Facile Construction of Covalent Organic Framework Nanozyme for Colorimetric Detection of Uranium

2D covalent organic frameworks (2D COFs) have been recognized as a novel class of photoactive materials owing to their extended π-electron conjugation and high chemical stabilities. Herein, a new covalent organic framework (Tph-BDP) is facilely synthesized by using a porphyrin derivative and an organic dye BODIPY derivative (5,5-difluoro-2,8-diformyl-1,3,7,9-tetramethyl-10-phenyl-5H-dipyrrolo[1,2-c:2',1'-f][1,3,2]diazabori-nin-4-ium-5-uide) as monomers for the first time, and their unique photosensitive properties endow them excellent simulated oxidase activity under 635 nm laser irradiation that can catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB). Further findings demonstrate that the presence of uranium (UO₂²⁺ ) can coordinate with imines of the oxidation products of TMB, thus modulating the charge transfer process of the colored products accompanied with intensive aggregation and remarkable color fading. This research provides a preparation strategy for COFs with excellent photocatalytic properties and nanozyme activity, and broadens the applications of the simple colorimetric methods for sensitive and selective radionuclide detection.

An indolino-spironaphthooxazine probe for colorimetric detection of ferric ions in drinking water

The sensing performance of a novel indolino-spironaphthooxazine derivative (SPNO), 6′(3,4-dihydroisoquinolin-2(1H)-yl)-3,3-dimethyl-1-phenethylspiro[indoline-2,3′-naphtho[2,1-b][1,4]oxazine], was investigated for rapid colorimetric detection of ferric ions (Fe³⁺) in drinking water.