Electrochemical enantioselective sensor for effective recognition of tryptophan isomers based on chiral polyaniline twisted nanoribbon

Applications of Nanozymes in Chiral-Molecule Recognition through Electrochemical and Ultraviolet-Visible Analysis

Chiral molecules have similar physicochemical properties, which are different in terms of physiological activities and toxicities, rendering their differentiation and recognition highly significant. Nanozymes, which are nanomaterials with inherent enzyme-like activities, have garnered significant interest owing to their high cost-effectiveness, enhanced stability, and straightforward synthesis. However, constructing nanozymes with high activity and enantioselectivity remains a significant challenge. This review briefly introduces the synthesis methods of chiral nanozymes and systematically summarizes the latest research progress in enantioselective recognition of chiral molecules based on electrochemical methods and ultraviolet-visible absorption spectroscopy. Moreover, the challenges and development trends in developing enantioselective nanozymes are discussed. It is expected that this review will provide new ideas for the design of multifunctional chiral nanozymes and broaden the application field of nanozymes.

Interindividual- and blood-correlated sweat phenylalanine multimodal analytical biochips for tracking exercise metabolism

In situ monitoring of endogenous amino acid loss through sweat can provide physiological insights into health and metabolism. However, existing amino acid biosensors are unable to quantitatively assess metabolic status during exercise and are rarely used to establish blood-sweat correlations because they only detect a single concentration indicator and disregard sweat rate. Here, we present a wearable multimodal biochip integrated with advanced electrochemical electrodes and multipurpose microfluidic channels that enables simultaneous quantification of multiple sweat indicators, including phenylalanine and chloride, as well as sweat rate. This combined measurement approach reveals a negative correlation between sweat phenylalanine levels and sweat rates among individuals, which further enables identification of individuals at high metabolic risk. By tracking phenylalanine fluctuations induced by protein intake during exercise and normalizing the concentration indicator by sweat rates to reduce interindividual variability, we demonstrate a reliable method to correlate and analyze sweat-blood phenylalanine levels for personal health monitoring.

Development of a chiral electrochemical sensor based on copper-amino acid mercaptide nanorods for enantioselective discrimination of tryptophan enantiomers

Chirality is an important property of nature and it regulates fundamental phenomena in nature and organisms. Here, we develop a chiral electrochemical sensor based on copper-amino acid mercaptide nanorods (L-CuCys NRs) to discriminate tryptophan (Trp) isomers. The chiral L-CuCys NRs are prepared in alkaline solution based on the facile coordination reaction between the sulfhydryl groups of L-Cys and copper ions. Since the stability constant (K) of L-CuCys NRs with L-Trp (752) are much higher than that of L-CuCys NRs with D-Trp (242), the cross-linking bonds between L-CuCys NRs and L-Trp are more stable than those between L-CuCys NRs and D-Trp. Consequently, this electrochemical sensor can selectively recognize the Trp isomers with an enantiomeric electrochemical difference ratio (I_L-Trp/I_D-Trp) of 3.22, and it exhibits a detection limit of 0.26 μM for L-Trp. Moreover, this electrochemical sensor can quantitatively measure Trp isomers in complex samples. Importantly, this electrochemical sensor has the characteristics of high stability, good repeatability, easy fabrication, low cost, and efficient discrimination of tryptophan (Trp) isomers.

Chiral Materials: Progress, Applications, and Prospects

Chirality is a universal phenomenon in molecular and biological systems, denoting an asymmetric configurational property where an object cannot be superimposed onto its mirror image by any kind of translation or rotation, which is ubiquitous on the scale from neutrinos to spiral galaxies. Chirality plays a very important role in the life system. Many biological molecules in the life body show chirality, such as the "codebook" of the earth's biological diversity-DNA, nucleic acid, etc. Intriguingly, living organisms hierarchically consist of homochiral building blocks, for example, l-amino acids and d-sugars with unknown reason. When molecules with chirality interact with these chiral factors, only one conformation favors the positive development of life, that is, the chiral host environment can only selectively interact with chiral molecules of one of the conformations. The differences in chiral interactions are often manifested by chiral recognition, mutual matching, and interactions with chiral molecules, which means that the stereoselectivity of chiral molecules can produce changes in pharmacodynamics and pathology. Here, the latest investigations are summarized including the construction and applications of chiral materials based on natural small molecules as chiral source, natural biomacromolecules as chiral sources, and the material synthesized by design as a chiral source.

Chiral MOFs encapsulated by polymers with poly-metallic coordination as chiral biosensors

Chiral materials have drawn the widespread attention for their its chiral recognition ability. The design and synthesis of chiral material are of importance owing to the unpredictability in controlling chirality during the synthesis process. To circumvent problems, a chiral MOF (D-His-ZIF-8) was synthesized by ligand exchange of 2-methylimidazole (Hmim) on ZIF-8 by D-histidine (D-His), which can be treated as chiral host to distinguish amino acid enantiomers. The obtained D-His-ZIF-8 can provide chiral nanochannels for amino acid guests. Meanwhile, polynary transition-metal ion (Co²⁺ and Fe³⁺) coordinating with polydopamine (PDA) wrapped on the surface of D-His-ZIF-8 can increase the active sites. The electrochemical chiral recognition behavior showed that D-His-ZIF-8@CoFe-PDA exhibited good recognition of the tryptophan enantiomer (L/D-Trp) (working potential of -0.2 V vs. Hg/HgCl₂). The LOD and LOQ of L-Trp were 0.066 mM and 0.22 mM, respectively, while the LOD and LOQ of D-Trp were 0.15 mM and 0.50 mM, respectively. Finally, the usefulness of D-His-ZIF-8@CoFe-PDA/GCE was evaluated with a recovery of 94.4-103%. The analysis of real  samples shows that D-His-ZIF-8@CoFe-PDA/GCE is a feasible sensing platform for the detection of L-Trp and D-Trp.

Highly Efficient versus Null Electrochemical Enantioselective Recognition Controlled by Achiral Colinkers in Homochiral Metal-Organic Frameworks

Chiral materials capable of electrochemical enantiomeric recognition are highly desirable for many applications, but it is still very challenging to achieve high recognition efficiency for lack of the knowledge of structure-property relationships. Here, we report the completely distinct enantiomeric recognition related to slightly different achiral colinkers in isomorphic homochiral metal-organic frameworks with the same chiral linker. Cu-TBPBe, for which the achiral colinker has two pyridyl rings connected by ─CH═CH─, shows excellent enantioselectivity and sensitivity for electrochemical recognition of l-tryptophan (Trp) with a detection limit of 3.16 nM. The l-to-d ratio of differential pulse voltammetric (DPV) currents reaches 53, which is much higher than the values (2-14) reported for previous electrochemical sensors. By contrast, Cu-TBPBa, in which the achiral colinker has -CH₂-CH₂- between pyridyl rings, is incapable of discrimination between l-Trp and d-Trp. Structural and spectral analyses suggest that the achiral conjugated colinker and the chiral moieties around it cooperate to produce a chiral pocket in favor of enantioselective adsorption through multiple hydrogen-bonding and π-π stacking interactions. The work demonstrated that Cu-TBPBe can be used to fabricate reliable electrochemical sensors for ultrasensitive quantification of Trp enantiomers in racemic mixtures and in complex biological systems such as urine. The work also highlights that an achiral coligand can be of vital importance in determining enantiomeric discrimination, opening up a new avenue for the design of chiral sensing materials.

A renewable electrochemical sensor based on a self-assembled framework of chiral molecules for efficient identification of tryptophan isomers

Molecular self-assembly provides a reasonably effective strategy for the design and construction of chiral sensors. Here, Cu²⁺ was connected to β-cyclodextrin (β-CD) through coordination to synthesize Cu₂-β-CD, subsequently assembled with ammoniated chitosan-MWCNTs (NH₂-CS-MWCNTs) by the effect of coordination driver to form a chiral sensing interface Cu₂-β-CD/NH₂-CS-MWCNTs. Using the electrochemical method, the valid recognition of tryptophan (Trp) isomers was achieved on the self-assembly interface. Under the optimal experimental conditions, the developed sensor exhibited good linearity and satisfactorily renewable ability. Cu₂-β-CD/NH₂-CS-MWCNTs/GCE showed the capacity to predict the ratio of D-Trp and L-Trp in racemic mixtures and the possibility of qualitative and quantitative determination for Trp isomers. Finally, the electrochemical sensor was used to detect the Trp enantiomers in rat serum, further verifying the feasibility of the sensor in the determination of actual samples. Therefore, the electrochemical chiral sensor not only is used for the recognition of Trp enantiomers but shows great potential in practical applications.

Doped Polythiophene Chiral Electrodes as Electrochemical Biosensors

π-conducting materials such as chiral polythiophenes exhibit excellent electrochemical stability in doped and undoped states on electrode surfaces (chiral electrodes), which help tune their physical and electronic properties for a wide range of uses. To overcome the limitations of traditional surface immobilization methods, an alternative pathway for the detection of organic and bioorganic targets using chiral electrodes has been developed. Moreover, chiral electrodes have the ability to carry functionalities, which helps the immobilization and recognition of bioorganic molecules. In this review, we describe the use of polythiophenes for the design of chiral electrodes and their applications as electrochemical biosensors.

Molecular and nano structures of chiral PEDOT derivatives influence the enantiorecognition of biomolecules. In silico analysis of chiral recognition

In this study we investigated the synergistic effects of the chirality (molecular structure) and surface morphology (nanostructure) of a newly designed sensing platform for the stereoselective recognition of biomolecules. We synthesized 3,4-ethylenedioxythiophene monomers presenting an OH functional group on the side chain (EDOT-OH) with either R or S chirality and then electropolymerized them in a template-free manner to engineer poly(EDOT-OH) nanotubes and smooth films with R or S chirality. We used a quartz crystal microbalance (QCM) to examine the differential binding of fetal bovine serum, RGD peptide, insulin, and (R)- and (S)-mandelic acid (MA) on these chiral polymeric platforms. All of these biomolecules bound stereoselectively and with greater affinity toward the nanotubes than to the smooth films. The sensitive chiral recognition of (S)- and (R)-MA on the (R)-poly(EDOT-OH) nanotube surface occurred with the highest chiral discrepancy ratio of 1.80. In vitro experiments revealed a greater degree of protein deposition from MCF-7 cells on the chiral nanotube surfaces. We employed ab initio molecular dynamics simulations and density functional theory calculations to investigate the mechanism underlying the sensitive chiral recognition between the chiral sensing platforms and the chiral analyte molecules.