Convenient detection of H2S based on the photothermal effect of Au@Ag nanocubes using a handheld thermometer as readout

One-Step Synthesis of Chitosan Hydrogel as Electrochemical Chemosensor for Hydrogen Sulfide Detection in Pregnancy-Induced Hypertension Syndrome Serum Sample

Oxidative stress caused by pregnancy-induced hypertension syndrome significantly affects the health of pregnant women. Hydrogen sulfide is a typical gaseous signal molecule against oxidative stress, and it is of profound significance to develop a detection method. In this study, a stimuli-responsive hydrogel was constructed based on the coordination and bonding principle of metal ions and chitosan (CS) to realize the quantitative detection of hydrogen sulfide (H2S). The chain of CS contains a large number of amino groups and hydroxyl groups, which can form the coordination structure with Cu2+, triggering CS to form a stable hydrogel. The hydrogel can be formed within about 5 s, which has the characteristics of rapid preparation. In the presence of target H2S, the cross-linking agent Cu2+ in the hydrogel can compete out, resulting in the collapse of the hydrogel and the release of the electrochemical probe. By detecting the concentration of the released electrochemical probe, the quantitative detection of H2S can be achieved. The prepared hydrogel has a good linear relationship with the concentration of H2S from 1 μM to 60 μm. At the same time, the hydrogel has good specificity and stability, and it can be applied to the detection of H2S in serum samples.

Portable Sensor for Aflatoxin B1 Based on the Regulation of Resistance of a Microchannel Using a Multimeter as Readout

Changes in the charge density on the inner surface of the microchannel can modulate the ion concentration at the tip, thus causing changes in the resistance of the system. In this study, this property is adopted to construct a portable sensor using a multimeter and aflatoxin B1 (AFB1) is used as the model target. Initially, the cDNA/aptamer complex is modified in the microchannel. The inner microchannel surface's charge density is then altered by the recognition of the target, leading to a change in the system's resistance, which can be conveniently monitored using a multimeter. Critical parameters influencing the performance of the system are optimized. Under optimum conditions, the resistance is linearly related to the logarithm of AFB1 concentration in the range of 100 fM-10 nM and the detection limit is 46 fM (S/N = 3). The resistive measurement is separated from the recognition reaction of the target, reducing the matrix interference during the detection process. This sensor boasts high sensitivity and specificity coupled with commendable reproducibility and stability. It is applied to assay the AFB1 content successfully in an actual sample of corn. Moreover, this approach is cost-effective, user-friendly, and highly accurate.

Nanoarchitectonics of photothermal materials to enhance the sensitivity of lateral flow assays

Lateral flow assays (LFAs) are currently the most widely used point-of-care testing technique with remarkable advantages such as simple operation, rapid analysis, portability, and low cost. Traditionally, gold nanoparticles are employed as tracer element in LFAs due to their strong localised surface plasmon resonance. However, this conventional LFA technique based on colorimetric analysis is neither useful to determine critical analytes with desired sensitivity, nor can it quantify the analytes. Various signal amplification strategies have been proposed to improve the sensitivity and the quantitative determination of analytes using LFAs. One of the promising strategies is to enhance the photothermal properties of nanomaterials to generate heat after light irradiation, followed by a temperature measurement to detect and quantify the analyte concentration. Recently, it has been observed that the nanoscale architecture of materials, including size, shape, and nanoscale composition, plays a significant role in enhancing the photothermal properties of nanomaterials. In this review, we discuss the nanoarchitectonics of nanomaterials regarding enhanced photothermal properties and their application in LFAs. Initially, we discuss various important photothermal materials and their classification along with their working principle. Then, we highlight important aspects of the nanoscale architecture (i.e., size, shape, and composition) to enable maximum light-to-heat conversion efficiency. Finally, we discuss some of the recent advances in photothermal LFAs and their application in detecting analytes.

Signal-On and Highly Sensitive Electrochemiluminescence Biosensor for Hydrogen Sulfide in Joint Fluid Based on Silver-Ion-Mediated Base Pairs and Hybridization Chain Reaction

Hydrogen sulfide (H2S) in joint fluid acts as a signal molecule to regulate joint inflammation. Direct detection of H2S in joint fluid is of great significance for the diagnosis and treatment of arthritis. However, due to the low volume of joint fluid and low H2S concentration, existing methods face the problem of the insufficient limit of detection. In this study, a highly sensitive biosensor was proposed by designing a primer probe and combining it with hybrid chain reaction (HCR) under the strong interaction between metal ions and H2S to achieve H2S detection. The primer probe containing multiple cytosine (C) sequences was fixed on a gold electrode, and the C–Ag–C hairpin structure was formed under the action of Ag+. In the presence of H2S, it can combine with Ag+ in the hairpin structure to form Ag2S, which leads to the opening of the hairpin structure and triggers the hybridization chain reaction (HCR) with another two hairpin structures (H1 and H2). A large number of double-stranded nucleic acid structures can be obtained on the electrode surface. Finally, Ru(phen)32+ can be embedded into the double chain structure to generate the electrochemiluminescence (ECL) signal. The linear response of the H2S biosensor ranged from 0.1000 to 1500 nM, and the limit of detection concentration of H2S was 0.0398 nM. The developed biosensor was successfully used to determine H2S in joint fluid.

Dual-mode immunoassay for diethylstilbestrol based on peroxidase activity and photothermal effect of black phosphorus-gold nanoparticle nanohybrids

Nanozyme-mediated 3,3',5,5'-tetramethylbenzidine (TMB) - H₂O₂ systems have spawned the establishment of multiple colorimetric sensing platforms that are effective but sometimes subject to low sensitivity. Taking temperature as the output signal, photothermal effects lead to new strategies for sensitive detection. In this paper, a colorimetric and photothermal dual-mode immunoassay for diethylstilbestrol (DES) was constructed. It is based on the oxidation reaction of TMB catalyzed by black phosphorus-gold nanoparticle (BP/Au) nanohybrids, and the kinetics as well as catalytic mechanism of the nanohybrids were investigated in detail for the first time. Herein, the nanohybrids playcatalytic and photothermal dual roles. Moreover, the one-electron oxidation product of TMB (oxidized TMB) not only acts as chromogenic agent but also an excellent NIR laser-driven photothermal agent. The temperature (ΔT/°C) was gauged by a portable digital thermometer. Through an indirect competition strategy, a simple, sensitive, and economic immunosensor was proposed. Higher DES content in the sample correlated with less BP/Au nanohybrids conjugated to the surface of ELISA microplate, a weaker color change, and a lower temperature variation when exposed to laser irradiation. This method was applied for DES determination in real samples with gratifying recovery rates, showing great promise in food safety inspection applications.

Integration of organic and inorganic photothermal probes for enhanced photothermometric sensing of silver ions

A new signal-amplified photothermometric sensor of Ag⁺ was explored based on a simple yet effective integration of inorganic and organic photothermal probes, mainly depending on the successful exploitation of a dual-signal transduction channel originating from the inherent photothermal property and the peroxidase-like activity of Prussian blue nanocubes (PB NCs).

Quantitative gold nanorods based photothermal biosensor for glucose using a thermometer as readout

To meet the increasing need for point-of-care testing (POCT), simple and portable readout strategies would be highly desirable. Thermometer with high accuracy and straightforward readout is an ideal tool for the development of new POCT methods. The exploration of new thermometer-based detection methods is of great significance. In this study, a simple biosensor for glucose based on the photothermal effect of gold nanorods using a simple thermometer as readout has been developed. In the presence of glucose oxidase, glucose can react with the dissolved oxygen to produce H₂O₂. With the help of Fe²⁺, H₂O₂ can etch gold nanorods (AuNRs) to different aspect ratios. The decrease of the aspect ratio of AuNRs leads to the blue-shift of the localized surface plasmon resonance peak, resulting in a decrease of photothermal effect in the near-infrared regions and the temperature of the system decreased. The change of the temperature has a linear relationship with the logarithm of glucose concentration in the range of 1.0-10.0 mM with a detection limit of 0.8 mM. The proposed method possesses a bias offset of -0.03 mM for glucose detection compared to the hospital method. Since many enzymatic reactions can produce H₂O₂, the principle can be modified to detect different targets by simply change of the enzyme used.