Exploitation of o-benzoyl benzoic acid as an efficient electroactive material for selective determination of Cr (III) ions in pharmaceutical samples and industrial waste water using carbon sensor

MIL-88B(Fe)-NH2: an amine-functionalized metal-organic framework for application in a sensitive electrochemical sensor for Cd2+, Pb2+, and Cu2+ ion detection

We propose here an electrochemical platform for multi-heavy metal ion detection in water based on MIL-88B(Fe)-NH₂, an amine-functioned metal-organic framework (MOF) for modifying the surface of a glassy carbon electrode (GCE). Herein, MIL-88B(Fe)-NH₂ with abundant functionalized amine groups can play the role of capture sites for the enrichment of metal ions before electrochemical oxidation sensing. MIL-88B(Fe)-NH₂ was synthesized under optimized conditions through a solvothermal method and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transition electron microscopy (TEM), Fourier-transform infrared spectroscopy (FT-IR), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) techniques. MIL-88B(Fe)-NH₂ was then drop-casted on GCE to electrochemically determine the Cd²⁺, Pb²⁺ and Cu²⁺ ion concentrations by differential pulse voltammetry (DPV). The electrochemical sensor exhibits excellent electrochemical performance toward Cd²⁺, Pb²⁺ and Cu²⁺ ions in the large linear ranges of 0.025-1.000 μM, 0.3-10.0 μM and 0.6-10.0 μM with limits of detection that are 2.0 × 10^-10 M, 1.92 × 10^-7 M and 3.81 × 10^-7 M, respectively. The fabricated sensor also shows high reliability and good selectivity. This MIL-88B(Fe)-NH₂ application strategy is promising for the evaluation of various heavy metal ions in water.

Recent advances in perovskite oxides for non-enzymatic electrochemical sensors: A review

Non-enzymatic electrochemical sensors with significant advantages of high sensitivity, long-term stability, and excellent reproducibility, are one promising technology to solve many challenges, such as the detection of toxic substances and viruses. Among various materials, perovskite oxides have become a promising candidate for use in non-enzymatic electrochemical sensors because of their low cost, flexible structure, and high intrinsic catalytic activity. A comprehensive overview of the recent advances in perovskite oxides for non-enzymatic electrochemical sensors is provided, which includes the synthesis methods of nanostructured perovskites and the electrocatalytic mechanisms of perovskite catalysts. The better sensing performance of perovskite oxides is mainly due to the lattice O vacancies and superoxide oxygen ions (O₂^2-/O^-), which are generated by the transfer of lattice oxygen to adsorbed -OH and have performed excellent properties suitable for electrooxidation of analytes. However, the limited electron transfer kinetics, stability, and selectivity of perovskite oxides alone make perovskite oxides far from ready for scientific development. Therefore, composites of perovskite oxides with other materials like graphitic carbon, metals, metal compounds, conducting organics, and biomolecules are summarized. Furthermore, a brief section describing the future challenges and the corresponding recommendation is presented in this review.

A comparative study on selectivity and sensitivity of new chromium and copper electrodes

4-Methylcoumarin-7-yloxy-N-phenyl acetamide and 4-methylcoumarin-7-yloxy-N-4-nitrophenyl acetamide were synthesized and used as new ionophores in the carbon paste matrix to produce two novel potentiometric modified electrodes. The selectivity of the electrode changed from copper (II) to chromium (III) with the addition of a nitro group to the phenyl ring of the ionophore. The ionophores’ tendency to ions was confirmed by UV–visible spectrophotometry. Both electrodes were modified by multi-walled carbon nanotubes (MWCNTs) as an excellent modifier of carbon paste electrode (CPE). The best sensor response in the case of copper (II) selective CPE was obtained by 5% ionophore, 65% graphite powder, 5% MWCNT, and 25% paraffin oil. In addition, in the case of chromium (III) selective CPE, these conditions are 20% ionophore, 50% graphite powder, 5% MWCNT, and 25% paraffin oil. The copper (II) selective CPE showed a Nernstian slope of 32.15 mV/decade within the concentration range of 1.0 × 10^–10–1.0 × 10^–1 mol L⁻¹, while chromium (III) selective CPE showed a Nernstian slope of 19.28 mV/decade over the concentration range of 1.0 × 10^–10–7.0 × 10^–3 mol L⁻¹. The electrodes have short response time of less than 5 s and were used successfully to determine copper (II) in wastewater and to speciation of chromium (III) and chromium (VI).

Exploitation of 2D Cu-MOF nanosheets as a unique electroactive material for ultrasensitive Cu(II) ion estimation in various real samples

Herein, hybrid carbon sensor has been developed with graphite sheets as a matrix, tricresyl phosphate (TCP) as a plasticizer and nanosheets of 2D Cu-MOF (metal-organic framework) as an electroactive material for the ultrasensitive Cu(II) ion detection in various real samples. Where, the present study proves the efficiency of 2D Cu-MOF as a promising sensing material for the development of Cu(II) ion selective carbon sensor. The developed 2D Cu-MOF nanosheets based sensor containing 2D Cu-MOF: TCP: graphite in the ratio of 2.67: 30.54: 66.79 (% wt/wt) displayed unique Nernstian behavior over two linearity ranges of 1.0 × 10^-11-1.0 × 10^-9 and 1.0 × 10^-5-1.0 × 10^-1 mol L^-1 with slopes of 29.5 ± 0.25 and 29.6 ± 0.13 mV decade^-1, respectively. The fabricated carbon sensor achieved a widely pH independency, fast response time and superior thermal stability with highly selective and ultrasensitive performance. Moreover, It has been efficiently applied for the Cu(II) ion potentiometric estimation in human hair, sesames seeds, two different tea infusions and tap water real samples.

Enhanced Adsorption of Rhodamine B on Modified Oil-Based Drill Cutting Ash: Characterization, Adsorption Kinetics, and Adsorption Isotherm

In this paper, phosphoric acid (H₃PO₄), hydrochloric acid (HCl), and hydrogen peroxide (H₂O₂) were employed for the modification of oil-based drill cutting ash (OBDCA) for the first time. The adsorption of rhodamine B (RhB) on modified oil-based drill cutting ash (MOBDCA) in an aqueous medium was investigated. H₂O₂-modified OBDCA had the optimal adsorption efficiency for RhB. The physical and chemical properties of MOBDCA were analyzed using X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), ζ-potential, N₂ adsorption-desorption isotherm, and pore size distribution. The effect of the pH value (3-11), reaction time (10-720 min), and initial RhB concentration (10-200 mg/L) on RhB adsorption was discussed. The adsorption kinetics highly fitted with the pseudo-second-order model (R ² > 0.99), which indicated that the adsorption process was dominated by chemisorption. The adsorption isotherm fitted well with the Langmuir and Freundlich models (R ² > 0.97), which indicated the monolayer adsorption process and the heterogeneous adsorption process, respectively. The theoretic adsorption capacity (50 mg/g) for RhB was achieved by H₂O₂-modified OBDCA. This paper provides a promising method of resource utilization of OBDCA to treat organic pollutants.