Ratiometric dual-emission of Rhodamine-B grafted carbon dots for full-range solvent components detection

Water detection in organic solvents using a copolymer membrane immobilised with a fluorescent intramolecular charge transfer-type dye: effects of intramolecular hydrogen bonds

Numerous fluorescent dye-based optical sensors have been developed to detect water in organic solvents. However, only a few such sensors can detect water in polar solvents such as methanol or dimethyl sulfoxide, and their detection range is generally narrow. Therefore, in this study, a copolymer membrane incorporated with a pyridinium betaine dye (denoted PB1), which exhibited intramolecular charge transfer (ICT) characteristics, was developed to realise simple water detection in organic solvents. The pyridinium betaine structure, comprising intramolecular hydrogen bonds between the oxygen in the maleimide moiety and the hydrogen in the pyridinium, was vital for achieving efficient fluorescence emission. The membrane was prepared by copolymerising PB1 with the N,N-dimethyl acrylamide/acrylamide monomer on a glass plate, and the fluorescence in water-mixed organic solvents was investigated (λabs = 490 nm, λfl = 630 nm). The fluorescence intensity of the dye-immobilised membrane decreased with increasing water content of the organic solvents. The detection ranges in tetrahydrofuran, ethanol, methanol, and dimethyl sulfoxide were approximately <40, <40, <40, and <60 vol% water, respectively. In contrast, membranes based on a quaternary pyridinium dye (without intramolecular hydrogen bonds) did not detect water in methanol and dimethyl sulfoxide, although it was more sensitive than PB1 in the narrow region of low water concentration in THF. Theoretical calculations corroborated the importance of the pyridinium betaine structure in detecting water in organic solvents, with the increase in polarity and the formation of intermolecular hydrogen bonds between PB1 and water found to induce molecular rotation and fluorescence quenching.

Identification of Chinese baijiu from the same brand based on a graphene quantum dots fluorescence sensing array

The identification of Chinese baijiu is crucial to regulating the international market and maintaining legitimate rights, as the popularity, influence and awareness of baijiu are growing. A graphene quantum dot (GQD) based fluorescence sensor array is designed in this paper. Upon using only GQDs as a single sensing element, combining three different solvents improves the sensing array's detection sensitivity while simplifying material preparation and experimental detection. Adding organic substances creates intermolecular forces between the GQDs and the solvent, causing the fluorescence intensity to change. The sensor array was able to distinguish 21 types of organic matter, different ratios of quaternary mixed organic materials and 17 types of baijiu of the same brand. It also showed excellent performance in the detection of species in blind samples, with the machine learning algorithm successfully distinguishing baijiu from five other distilled spirits. The experiment provides guidance for the practical application of GQDs and provides a simple but effective reference for sensor arrays to detect baijiu.

Synthesis Strategies, Optical Mechanisms, and Applications of Dual-Emissive Carbon Dots

Tuning the optical properties of carbon dots (CDs) and figuring out the mechanisms underneath the emissive phenomena have been one of the most cutting-edge topics in the development of carbon-based nanomaterials. Dual-emissive CDs possess the intrinsic dual-emission character upon single-wavelength excitation, which significantly benefits their multi-purpose applications. Explosive exploitations of dual-emissive CDs have been reported during the past five years. Nevertheless, there is a lack of a systematic summary of the rising star nanomaterial. In this review, we summarize the synthesis strategies and optical mechanisms of the dual-emissive CDs. The applications in the areas of biosensing, bioimaging, as well as photoelectronic devices are also outlined. The last section presents the main challenges and perspectives in further promoting the development of dual-emissive CDs. By covering the most vital publications, we anticipate that the review is of referential significance for researchers in the synthesis, characterization, and application of dual-emissive CDs.

A Ratiometric Fluorescent Probe Based on RhB Functionalized Tb-MOFs for the Continuous Visual Detection of Fe3+ and AA

In this study, a red-green dual-emitting fluorescent composite (RhB@MOFs) was constructed by introducing the red-emitting organic fluorescent dye rhodamine B (RhB) into metal-organic frameworks (Tb-MOFs). The sample can be used as a ratiometric fluorescent probe, which not only avoids errors caused by instrument and environmental instability but also has multiple applications in detection. The results indicated that the RhB@MOFs exhibited a turned-off response toward Fe3+ and a turned-on response for the continuous detection of ascorbic acid (AA). This ratiometric fluorescent probe possessed high sensitivity and excellent selectivity in the continuous determination of Fe3+ and AA. It is worth mentioning that remarkable fluorescence change could be clearly observed by the naked eye under a UV lamp, which is more convenient in applications. In addition, the mechanisms of Fe3+- and AA-induced fluorescence quench and recovery are discussed in detail. This ratiometric probe displayed outstanding recognition of heavy metal ions and biomolecules, providing potential applications for water quality monitoring and biomolecule determination.

Ratiometric Fluorescent Detection of Ultrasound-Regulated ATP Release: An Ultrasound-Resistant Cu,N-Doped Carbon Nanosphere

Focused ultrasound, as a protocol of cancer therapy, might induce extracellular adenosine triphosphate (ATP) release, which could enhance cancer immunotherapy and be monitored as a therapeutic marker. To achieve an ATP-detecting probe resistant to ultrasound irradiation, we constructed a Cu/N-doped carbon nanosphere (CNS), which has two fluorescence (FL) emissions at 438 and 578 nm to detect ultrasound-regulated ATP release. The addition of ATP to Cu/N-doped CNS was conducted to recover the FL intensity at 438 nm, where ATP enhanced the FL intensity probably via intramolecular charge transfer (ICT) primarily and hydrogen-bond-induced emission (HBIE) secondarily. The ratiometric probe was sensitive to detect micro ATP (0.2-0.6 μM) with the limit of detection (LOD) of 0.068 μM. The detection of ultrasound-regulated ATP release by Cu,N-CNS/RhB showed that ATP release was enhanced by the long-pulsed ultrasound irradiation at 1.1 MHz (+37%, p < 0.01) and reduced by the short-pulsed ultrasound irradiation at 5 MHz (-78%, p < 0.001). Moreover, no significant difference in ATP release was detected between the control group and the dual-frequency ultrasound irradiation group (+4%). It is consistent with the results of ATP detection by the ATP-kit. Besides, all-ATP detection was developed to prove that the CNS had ultrasound-resistant properties, which means it could bear the irradiation of focused ultrasound in different patterns and detect all-ATP in real time. In the study, the ultrasound-resistant probe has the advantages of simple preparation, high specificity, low limit of detection, good biocompatibility, and cell imaging ability. It has great potential to act as a multifunctional ultrasound theranostic agent for simultaneous ultrasound therapy, ATP detection, and monitoring.

Recent Progress of Carbon Dots for Air Pollutants Detection and Photocatalytic Removal: Synthesis, Modifications, and Applications

Rapid industrialization has inevitably led to serious air pollution problems, thus it is urgent to develop detection and treatment technologies for qualitative and quantitative analysis and efficient removal of harmful pollutants. Notably, the employment of functional nanomaterials, in sensing and photocatalytic technologies, is promising to achieve efficient in situ detection and removal of gaseous pollutants. Among them, carbon dots (CDs) have shown significant potential due to their superior properties, such as controllable structures, easy surface modification, adjustable energy band, and excellent electron-transfer capacities. Moreover, their environmentally friendly preparation and efficient capture of solar energy provide a green option for sustainably addressing environmental problems. Here, recent advances in the rational design of CDs-based sensors and photocatalysts are highlighted. An overview of their applications in air pollutants detection and photocatalytic removal is presented, especially the diverse sensing and photocatalytic mechanisms of CDs are discussed. Finally, the challenges and perspectives are also provided, emphasizing the importance of synthetic mechanism investigation and rational design of structures.

Rapid determination of ethanol content based on an optical fiber-device and R6G-indicator

A rapid method for the determination of ethanol content is proposed and tested. A fluorescence detecting system, with a multimode fiber (MMF) sensing head, is employed. Rhodamine 6G (R6G) is applied as the fluorescent indicator. In the R6G aqueous solution, the molecules aggregate at high concentration, causing fluorescence quenching. Nevertheless, aggregation and quenching rarely occur in ethanol. Taking an ethanol and water mixture as the solvent, the photoluminescence (PL) intensity reflects the aggregation degree and the ethanol content. Based on this phenomenon, the contents of the ethanol-water mixture were measured through PL intensity detection. A limit of detection (LOD) at ∼0.1 vol% level was obtained in the range of 0-100%. Commercial Chinese baijiu and rubbing alcohol were tested and the results obtained were consistent with the label values. The detecting system is compact and of low-cost, and the detecting method is rapid, accurate and repeatable. There is good prospect of applications for the determination of ethanol content on-site.

Dual-Purpose Sensing Nanoprobe Based on Carbon Dots from o-Phenylenediamine: pH and Solvent Polarity Measurement

Today, the development of nanomaterials with sensing properties attracts much scientific interest because of the demand for low-cost nontoxic colloidal nanoprobes with high sensitivity and selectivity for various biomedical and environment-related applications. Carbon dots (CDs) are promising candidates for these applications as they demonstrate unique optical properties with intense emissions, biocompatibility, and ease of fabrication. Herein, we developed synthesis protocols to obtain CDs based on o-phenylenediamine with a variety of optical responses depending on additional precursors and changes in the reaction media. The obtained CDs are N-doped (N,S-doped in case of thiourea addition) less than 10 nm spherical particles with emissions observed in the 300−600 nm spectral region depending on their chemical composition. These CDs may act simultaneously as absorptive/fluorescent sensing probes for solvent polarity with ∆S/∆ENT up to 85, for ∆ENT from 0.099 to 1.0 and for pH values in the range of 3.0−8.0, thus opening an opportunity to check the pH in non-pure water or a mixture of solvents. Moreover, CDs preserve their optical properties when embedded in cellulose strips that can be used as sensing probes for fast and easy pH checks. We believe that the resulting dual-purpose sensing nano probes based on CDs will have high demand in various sensing applications.

Promising energy transfer system between fuorine and nitrogen Co-doped graphene quantum dots and Rhodamine B for ratiometric and visual detection of doxycycline in food

A novel sensor based on dual emissive fluorescent graphene quantum dots is developed for a rapid, selective, sensitive and visual detection of doxycycline (DOX). The ratiometric fluorescent probe is designed by grafting fluorescent group (Rhodamine B, RhB) on F, N-doped graphene quantum dots (FNGQDs). In the presence of DOX, the fluorescence at 466 nm is remarkably quenched due to inner filter effect and fluorescence resonance energy transfer, whereas the peak at 592 nm is attenuated slightly due to the energy transfer in the emission peaks of FNGQDs and RhB functional group. The sensor shows good linear relationship from 0.04 to 100 µM with a low detection limit of 40 nM. Furthermore, the flexible solid-state fluorescent sensing platform is used for detecting DOX in milk, pork and water samples. Therefore, this dual-emission FGQD-RhB can be used as a high-performance fluorescent and visual sensor for food safety and environmental monitoring.

Ratiometric fluorescent sensors for nitrite detection in the environment based on carbon dot/Rhodamine B systems

A novel carbon dot/Rhodamine B-based ratiometric fluorescent probe was developed for a highly sensitivity and selective detection of nitrite (NO₂⁻). The probe showed colour changes from blue to orange under ultraviolet light in response to NO₂⁻ with a detection limit as low as 67 nM in the range of 0 to 40 μM. A ratiometric fluorescent test paper was successfully prepared using the probe solution, which demonstrated its feasibility towards a rapid and semi-quantitative detection of NO₂⁻ in real samples.

A visual ratiometric fluorescent sensor based on blue carbon dot/Rhodamine B is used to selectively detect NO₂⁻ in the environment.

Mechanisms behind multicolor tunable Near-Infrared triple emission in graphene quantum dots and ratio fluorescent probe for water detection

Developing environmental-friendly and low-cost strategies of synthesizing red-emission graphene quantum dots (R-GQDs) is a considerable challenge. Herein, we present the green and facile preparation of R-GQDs by using o-phenylenediamine (o-PD) and catechol as precursors via oxidation/polymerization and Schiff base reaction at low temperature (80 °C) for 3 hrs. Results show that the prepared R-GQDs exhibit triple fluorescence emissions, which is enabled by the introduce of different nitrogen (pyrrolic N, pyridinic N, and amino N) species on the surface of R-GQDs. Moreover, the R-GQDs are implemented to detect the moisture in different organic solvent. A highly sensitive ratiometric sensing of water in organic solvents is achieved, and the relationship between the change of fluorescence signal caused by moisture and the corresponding internal emission site is also determined. In the end, the multicolor light emissions of R-GQDs are realized by simply adjusting the polarity of surrounding solvents. And based on the solvatochromism of R-GQDs, the multicolor solid fluorescent powder and ink are prepared for illumination application. All in all, the above research work presents a novel R-GQDs for wide application in detecting and illumination.

Sensitive detection of tamsulosin hydrochloride based on dual-emission ratiometric fluorescence probe consisting of amine-carbon quantum dots and rhodamine B

In this work, amine-carbon quantum dots (CQDs)/rhodamine B (RhB) ratiometric fluorescent (RF) sensor was employed for effective and selective determination of tamsulosin hydrochloride (TMS) based on a dual-emission fluorescence system. Although the function of amine-CQDs is to transfer the specific interaction between TMS and sensor into detectable fluorescence (FL) signals, RhB as a reference unit has been employed to omit internal and external effects. The FL signal was quenched by adding the TMS at 442 nm; nevertheless, it did not change at 569 nm. The material characterization and investigation of the sensing mechanism were done. The optimization of pH, the volumetric ratio of CQDs to RhB, and interaction time parameters were carried out by the one-variable-at-a-time (OVAT) method. The quantitative analysis of the concentration of TMS for this RF sensor in a linear range of 0.446-7.083 μg mL^-1 (1.091-17.338 μM) was obtained (R² = 0.9969, n = 3) under optimum conditions. The limit of detection and quantitation values were estimated to be 0.033 μg mL^-1 (0.081 μM) and 0.109 μg mL^-1 (0.267 μM), respectively. The repeatability of intra-day and inter-day were less than one percent. This inexpensive RF probe was well applied to determine TMS in biological fluids, and acceptable achievements were obtained.