A porous molecularly imprinted nanofilm for selective and sensitive sensing of an anticancer drug ruxolitinib

Electrochemical Behavior of Janus Kinase Inhibitor Ruxolitinib at a Taurine-Electropolymerized Carbon Paste Electrode: Insights into Sensing Mechanisms

Ruxolitinib (RXL) is a Janus kinase inhibitor used for treating intermediate- or high-risk myelofibrosis. This study presents an electrode modified with electrochemically polymerized taurine on a carbon paste electrode via cyclic voltammetry (CV). The surface characterization of the poly(taurine)-CP electrode was evaluated by using electrochemical (electrochemical impedance spectroscopy─EIS, CV), morphological (scanning electron microscope─SEM), and spectroscopic (Fourier-transform infrared spectroscopy─FT-IR) techniques. Under optimized conditions, RXL exhibited good linearity within the 0.01-1.0 μM concentration range, with a limit of detection (LOD) of 0.005 μM. The proposed electrochemical sensor demonstrated excellent selectivity, accuracy, precision, and repeatability. Furthermore, it effectively detected RXL in human urine and pharmaceutical samples.

A molecularly imprinted polymer-based electrochemical sensor for the determination of tofacitinib

Tofacitinib citrate (TOF) is a Janus kinase-3 inhibitor used for rheumatoid arthritis treatment. In this study, a molecularly imprinted polymer (MIP)-based sensor was produced using acrylamide as the functional monomer via photopolymerization technique for the electrochemical determination of TOF. This study is the first one to explain the electrochemical determination of TOF with a highly selective MIP-based sensor. The surface characterization of the MIP-based sensor was performed with scanning electron microscopy and energy-dispersive X-ray spectroscopy methods, and it was expanded with electrochemical characterization by cyclic voltammetry and electrochemical impedance spectroscopy (EIS) methods. TOF determination was performed using differential pulse voltammetry (DPV) and EIS methods in standard solution and spiked serum sample in the linear range between 1×10^-11 M and 1×10^-10 M. Very low limit of detection and limit of quantification values were found, confirming the sensitivity of the sensor. Recovery analysis with spiked serum and tablet samples verified the sensor's accuracy and applicability using DPV and EIS methods. The selectivity of the sensor was confirmed with imprinting factor and interference studies, and the sensor performance was controlled using non-imprinted polymer for comparison at every step.

The electrochemical quantitation method for sugammadex via a molecularly imprinted polymer-based sensor

Sugammadex (SUG) is a synthetically modified γ-cyclodextrin derivative used in hospitals after surgeries to reverse the neuromuscular blockade induced by rocuronium or vecuronium. In this study, we aimed to develop the first electroanalytical quantification method for sugammadex by using molecular imprinting (MIP) via the electropolymerization (EP) technique. An EP-MIP film was formed by EP on a screen-printed gold electrode (SPAuE) and a new electrochemical sensor, EP-MIP(SUG)/SPAuE, was fabricated using the 4-aminophenol monomer with copper ions to enhance the MIP-binding site. Surface and electrochemical characterization of the EP-MIP(SUG)/SPAuE sensor have been done via scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). After screening and optimization studies were carried out to fabricate a MIP-based electrochemical sensor, the analytical performance of EP-MIP(SUG)/SPAuE and the validation parameters were tested according to the ICH guidelines. The specificity/selectivity of the developed sensor has been shown by using common interferents found in the biological fluids and also molecules having similar structures, such as α-cyclodextrin, β-cyclodextrin, and γ-cyclodextrin. As a result, a quantitative analysis method has been developed and validated by using the EP-MIP(SUG)/SPAuE sensor in the concentration range of 0.1-1.0 pM with very high sensitivity (limit of detection: 27.3 fM). The applicability of the method has been shown for bulk drug substances, pharmaceutical dosage forms, and commercial serum samples with good recovery and RSD% results. The EP-MIP(SUG)/SPAuE is the first electrochemical sensor developed for the determination of sugammadex serving the aims of simplicity, short analysis time, and low cost, and has the potential to be adapted in the future as a portable and/or wearable sensor via miniaturization.

Designing of ZnO nanoparticles oriented interface imprinted electrochemical sensor for fluoxetine detection

This study represents nanoparticle-based well-oriented recognition sites via interface imprinting, followed by selective and sensitive determination of fluoxetine (FLX). Herein, FLX was firstly immobilized onto ZnO NPs, and then polymerization was carried out with MAPA, HEMA, and EGDMA on the glassy carbon electrode via photopolymerization. After the etching of ZnO with and 10 mM HCI solution, a porous structure with recognition sites for FLX was constructed onto surface. The characterization of the electrochemical sensor was accomplished by utilizing CV, EIS, ATR-FTIR AFM, and SEM analysis. The DPV was used to determine FLX in standard solution, serum sample, and tap water. The effect of FLX concentration variation was studied using the DPV in the range of 1.0 × 10^-11 M to 1.0 × 10^-10 M with a detection limit of 2.67 × 10^-12 M. This sensor showed specific recognition toward template, and more than 90% of its original response was retained after being stored in the desiccator at R.T. for 5 days. This technique has proven to be a powerful, highly selective, and sensitive tool for the rapid detection of FLX in tap water and spike serum samples.

A semi-covalent molecularly imprinted electrochemical sensor for rapid and selective detection of tiotropium bromide

Tiotropium bromide (TIO) is a long-acting bronchodilator used in the treatment of chronic obstructive pulmonary disease (COPD) and asthma. Specifically, it is used to prevent patients from worsening breathing difficulties. In this study, a new TIO-imprinted electrochemical sensor was designed to detect TIO in serum and pharmaceutical samples. Methacryloyl-L-histidine-cobalt(II) [MAH-Co(II)] has been used as a metal-chelating monomer for synthesizing selective molecularly imprinted polymer (MIP). MIP film has been developed on glassy carbon electrodes using MAH-Co(II) as the functional monomer, 2-hydroxyethyl methacrylate (HEMA) as the basic monomer, and ethylene glycol dimethacrylate (EGDMA) as the cross-linker in the photopolymerization method. The surface characterization of the developed MAH-Co(II)@MIP/GCE electrochemical sensor was done using scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). Also, the electrochemical behavior of the sensor was provided by differential pulse voltammetry (DPV), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS) techniques. Under optimized experimental conditions, the linearity range was in the range of 10-100 fM, and the limit of detection (LOD) and limit of quantitation (LOQ) values were calculated as 2.73 fM and 9.75 fM, respectively. The MAH-Co(II)@MIP/GCE sensor was used to precisely determine TIO in capsule and commercial serum samples. The results demonstrated that the MIP could specifically recognize TIO compared to structurally related drugs and could be reliably applied to the direct determination of drugs from real samples.

Electrochemistry as a Powerful Tool for Investigations of Antineoplastic Agents: A Comprehensive Review

Cancer is most frequently treated with antineoplastic agents (ANAs) that are hazardous to patients undergoing chemotherapy and the healthcare workers who handle ANAs in the course of their duties. All aspects related to hazardous oncological drugs illustrate that the monitoring of ANAs is essential to minimize the risks associated with these drugs. Among all analytical techniques used to test ANAs, electrochemistry holds an important position. This review, for the first time, comprehensively describes the progress done in electrochemistry of ANAs by means of a variety of bare or modified (bio)sensors over the last four decades (in the period of 1982-2021). Attention is paid not only to the development of electrochemical sensing protocols of ANAs in various biological, environmental, and pharmaceutical matrices but also to achievements of electrochemical techniques in the examination of the interactions of ANAs with deoxyribonucleic acid (DNA), carcinogenic cells, biomimetic membranes, peptides, and enzymes. Other aspects, including the enantiopurity studies, differentiation between single-stranded and double-stranded DNA without using any label or tag, studies on ANAs degradation, and their pharmacokinetics, by means of electrochemical techniques are also commented. Finally, concluding remarks that underline the existence of a significant niche for the basic electrochemical research that should be filled in the future are presented.

Kill two birds with one stone: Selective and fast removal and sensitive determination of oxytetracycline using surface molecularly imprinted polymer based on ionic liquid and ATRP polymerization

Oxytetracycline (OTC) residue in food and environment has potential threats to ecosystem and human health, thus its sensitive monitoring and effective elimination are very important. In this work, a new molecularly imprinted polymer (MIP) composite was prepared through atom transfer radical polymerization by using OTC as template, gold nanoparticles modified carbon nanospheres (Au-CNS) as supporter, ionic liquids (IL) as functional monomer and cross-linking agent. The obtained MIP-IL@Au-CNS composite was characterized by Fourier transform infrared absorption spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy and transmission electron microscopy. It displayed high imprinting factor (5.50) and adsorption capacity (56.7 mg g^-1), and could achieved the adsorption equilibrium in short time (about 15 min). Results also illustrated that the adsorption process basically conformed to the quasi-second-order kinetic model and Freundlich model, and MIP-IL@Au-CNS could be recycled at least 5 times. Furthermore, a sensitive OTC electrochemical sensor was developed by combining MIP-IL@Au-CNS with IL-modified carbon nanocomposites (IL@N-rGO-MWCNT). The resulting sensor demonstrated a linear response to OTC in the wide range of 0.02-20 μM, and the detection limit was down to 5 nM. It also had the advantages of high selectivity, fast elution/regeneration and simple construction procedure. The sensor had been applied to the detection of real samples, and acceptable recovery (96.4%-106%) and RSD (3.2%-6.2%) were obtained. This work expands the application of IL-based MIP in pollutant monitoring and enriching.

A sensitive and selective electrochemical sensor based on molecularly imprinted polymer for the assay of teriflunomide

In this work, pyrrole-histidine has been designed, synthesized and, used as a novel functional monomer to fabricate a molecularly imprinted electrochemical sensor for the selective and sensitive detection of teriflunomide (TER). The molecularly imprinted thin film of electrochemical sensor was constructed by directly electropolymerization of co-polymer of pyrrole-histidine (PyHis) with pyrrole in the presence of a template, TER, on a glassy carbon electrode (GCE). After electropolymerization, the structure and morphology of the fabricated MIP sensor were characterized by Fourier-transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM) and its electrochemical parameters such as cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS). The poly (pyrrole-co-pyrrole-histidine) [Poly (Py-co-PyHis)]@MIP/GCE sensor have a linear TER concentration in the of 0.1-1.0 pM with a low detection limit of 11.38 fM. The present strategy for electrochemical sensor have been also showed excellent recovery in synthetic serum samples and tablet dosage form with the recoveries 97.56% and 100.35%, respectively. The developed [Poly (Py-co-PyHis)]@MIP/GCE sensor exhibited an excellent electrochemical response for TER due to the synergistic effect of conducting polymer and molecularly imprinting techniques.