Nitrogen and sulfur co-doping strategy to trigger the peroxidase-like and electrochemical activity of Ti3C2 nanosheets for sensitive uric acid detection

MXene-based electrochemical devices applied for healthcare applications

The initial part of the review provides an extensive overview about MXenes as novel and exciting 2D nanomaterials describing their basic physico-chemical features, methods of their synthesis, and possible interfacial modifications and techniques, which could be applied to the characterization of MXenes. Unique physico-chemical parameters of MXenes make them attractive for many practical applications, which are shortly discussed. Use of MXenes for healthcare applications is a hot scientific discipline which is discussed in detail. The article focuses on determination of low molecular weight analytes (metabolites), high molecular weight analytes (DNA/RNA and proteins), or even cells, exosomes, and viruses detected using electrochemical sensors and biosensors. Separate chapters are provided to show the potential of MXene-based devices for determination of cancer biomarkers and as wearable sensors and biosensors for monitoring of a wide range of human activities.

MXene-based nanomaterials with enzyme-like properties for biomedical applications

Recently, great progress has been made in nanozyme research due to the rapid development of nanomaterials and nanotechnology. MXene-based nanomaterials have gained considerable attention owing to their unique physicochemical properties. They have been found to have high enzyme-like properties, such as peroxidase, oxidase, catalase, and superoxide dismutase. In this mini-review, we present an overview of the recent progress in MXene-based nanozymes, with emphasis on their synthetic methods, hybridization, bio-catalytic properties, and biomedical applications. The future challenges and prospects of MXene-based nanozymes are also proposed.

Smartphone-Enabled Fluorescence and Colorimetric Platform for the On-Site Detection of Hg2+ and Cl- Based on the Au/Cu/Ti3C2 Nanosheets

Smartphone-assisted fluorescence and colorimetric methods for the on-site detection of Hg²⁺ and Cl^- were established based on the oxidase-like activity of the Au-Hg alloy on the surface of Au/Cu/Ti₃C₂ NSs. The Au nanoparticles (NPs) were constructed via in-situ growth on the surface of Cu/Ti₃C₂ NSs and characterized by different characterization techniques. After the addition of Hg²⁺, the formation of Hg-Au alloys could promote the oxidization of o-phenylenediamine (OPD) to generate a new fluorescence emission peak of 2,3-diaminopenazine (ADP) at 570 nm. Therefore, a turn-on fluorescence method for the detection of Hg²⁺ was established. As the addition of Cl^- can influence the fluorescence of ADP, the fluorescence intensity was constantly quenched to achieve the continuous quantitative detection of Cl^-. Therefore, a turn-off fluorescence method for the detection of Cl^- was established. This method had good linear ranges for the detection of Hg²⁺ and Cl^- in 8.0-200.0 nM and 5.0-350.0 µM, with a detection limit of 0.8 nM and 27 nM, respectively. Depending on the color change with the detection of Hg²⁺ and Cl^-, a convenient on-site colorimetric method for an analysis of Hg²⁺ and Cl^- was achieved by using digital images combined with smartphones (color recognizers). The digital picture sensor could analyze RGB values in concentrations of Hg²⁺ or Cl^- via a smartphone app. In summary, the proposed Au/Cu/Ti₃C₂ NSs-based method provided a novel and more comprehensive application for environmental monitoring.

Oxidase-like V2C MXene nanozyme with inherent antibacterial properties for colorimetric sensing

The microbial environment greatly affects the performance of colourimetric sensors, especially the interference of bacteria in the sample detected. This paper reports the fabrication of an antibacterial colorimetric sensor based on V₂C MXene synthesized via simple intercalation and stripping. The prepared V₂C nanosheets can mimic oxidase activity towards 3,3',5,5'-tetramethylbenzidine (TMB) oxidation without exogenously adding H₂O₂. Further mechanistic studies showed that V₂C nanosheets could effectively activate the oxygen adsorbed on their surface, which in turn causes an increase in the bond length and a decrease in the magnetic moment of oxygen through electron transfer from the nanosheet surface to O₂. The V₂C nanosheets also exhibited excellent broad-spectrum antibacterial activity through the outbreak of reactive oxygen species. Owing to its unique catalytic activity and the inherent antibacterial ability for mimicking oxidase, a colorimetric sensing platform was developed to effectively determine L-cysteine levels at a detection limit of 30.0 nM (S/N = 3). It is impressive that the detection results of L-cysteine in various complex microbial environments are also very satisfactory. This study broadens the biological use of MXene-based nanomaterials through their satisfactory enzymatic activity and provides a simple and efficient colorimetric strategy for detection techniques used in complex microbial environments.

A new spectrophotometric method for uric acid detection based on copper doped mimic peroxidase

Cascade reactions catalyzed by natural uricase and mimic peroxidase (MPOD) have been applied for uric acid (UA) detection. However, the optimal catalytic activity of MPOD is mostly in acidic conditions (pH 2-5), mismatching the optimal catalytic alkaline environment of uricase. In this paper, using CuSO₄ and urea as raw materials, a MPOD with high catalytic activity in alkaline environment was synthesized by hydrothermal method. Then, based on coupling reaction of uricase/UA/MPOD/guaiacol (GA) system, a novel spectrophotometric method was established to detect 5-60 μmol/L UA (limit of detection = 3.14 μmol/L (S/N = 3)) and accurately quantified serum UA (275.6 ± 39.9 μmol/L, n = 5) with 95-105% of standard addition recovery. The results were consistent with commercial UA kit (p > 0.05). The MPOD could replace natural POD to reduce the cost of UA detection due to simple preparation and cheap raw materials, and is expected to achieve the specific detection of some substances, like glucose and cholesterol, combined with glucose oxidase and cholesterol oxidase.

2D MXene-Based Biosensing: A Review

MXene emerged as decent 2D material and has been exploited for numerous applications in the last decade. The remunerations of the ideal metallic conductivity, optical absorbance, mechanical stability, higher heterogeneous electron transfer rate, and good redox capability have made MXene a potential candidate for biosensing applications. The hydrophilic nature, biocompatibility, antifouling, and anti-toxicity properties have opened avenues for MXene to perform in vitro and in vivo analysis. In this review, the concept, operating principle, detailed mechanism, and characteristic properties are comprehensively assessed and compiled along with breakthroughs in MXene fabrication and conjugation strategies for the development of unique electrochemical and optical biosensors. Further, the current challenges are summarized and suggested future aspects. This review article is believed to shed some light on the development of MXene for biosensing and will open new opportunities for the future advanced translational application of MXene bioassays.

MXene-Based Composites as Nanozymes in Biomedicine: A Perspective

MXene-based nanozymes have garnered considerable attention because of their potential environmental and biomedical applications. These materials encompass alluring and manageable catalytic performances and physicochemical features, which make them suitable as (bio)sensors with high selectivity/sensitivity and efficiency. MXene-based structures with suitable electrical conductivity, biocompatibility, large surface area, optical/magnetic properties, and thermal/mechanical features can be applied in designing innovative nanozymes with area-dependent electrocatalytic performances. Despite the advances made, there is still a long way to deploy MXene-based nanozymes, especially in medical and healthcare applications; limitations pertaining the peroxidase-like activity and sensitivity/selectivity may restrict further practical applications of pristine MXenes. Thus, developing an efficient surface engineering tactic is still required to fabricate multifunctional MXene-based nanozymes with excellent activity. To obtain MXene-based nanozymes with unique physicochemical features and high stability, some crucial steps such as hybridization and modification ought to be performed. Notably, (nano)toxicological and long-term biosafety analyses along with clinical translation studies still need to be comprehensively addressed. Although very limited reports exist pertaining to the biomedical potentials of MXene-based nanozymes, the future explorations should transition toward the extensive research and detailed analyses to realize additional potentials of these structures in biomedicine with a focus on clinical and industrial aspects. In this perspective, therapeutic, diagnostic, and theranostic applications of MXene-based nanozymes are deliberated with a focus on future perspectives toward more successful clinical translational studies. The current state-of-the-art biomedical advances in the use of MXene-based nanozymes, as well as their developmental challenges and future prospects are also highlighted. In view of the fascinating properties of MXene-based nanozymes, these materials can open significant new opportunities in the future of bio- and nanomedicine.

Colorimetric determination of biothiols based on peroxidase-mimicking Ag nanoparticles decorated Ti3C2 nanosheets

Ag nanoparticle-decorated Ti₃C₂ nanosheets (AgNPs@Ti₃C₂ NSs) were facilely synthesized via a self-reduction approach, in which Ti₃C₂ NSs acted as both reductant and supporter. The AgNPs@Ti₃C₂ NS nanocomposite exhibited excellent peroxidase-like activity with o-phenylenediamine (OPD) and H₂O₂ as substrates. The catalytic behavior followed the typical Michaelis-Menten kinetics; Michaelis constant (K_m) and maximum initial velocity (V_max) for OPD were 0.263 mM and 43.2 × 10^-8 M^-1 s, indicating high affinity and high catalytic efficiency towards OPD. The catalytic mechanism was revealed to be an accelerated electron transfer process. Based on the inhibition effect on the peroxidase-like activity of AgNPs@Ti₃C₂ NSs, a simple, fast, and sensitive colorimetric method for detection of low-weight biothiols (cysteine (Cys), homocysteine (Hcy), and glutathione (GSH)) was developed by measuring the absorbance at 425 nm. The colorimetric method displayed wide linear range (50 nM to 50 μM for Cys, 10 nM to 250 μM for Hcy, 10 nM to 50 μM for GSH), low limit of detection (48.5 nM for Cys, 5.5 nM for Hcy, 7.0 nM for GSH), and good selectivity and short assay time (3 min). Moreover, the feasibility of this colorimetric sensor was demonstrated by accurately determining Cys in diluted human serum samples; good recovery (95.9-101.0%) and low relative standard deviations (2.8-4.9%) were obtained, showing great promise for point-of-care test in clinical samples.