Non-doped and non-modified carbon dots with high quantum yield for the chemosensing of uric acid and living cell imaging

Detection of sulphur(II) of carbon dots synthesized from Gardenia residue

The detection of anions using carbon dots (CDs) has received less attention compared to cations. Therefore, the present study aimed to develop a fluorescence sensor based on carbon dots (CDs) capable of detecting S2- in real water samples. The CDs were successfully prepared from the residues of a traditional Chinese herb, Gardenia, which emitted green photoluminescence (PL) under ultraviolet light irradiation. The as-prepared CDs were quasi-spherical in shape and ranged in size from 10 to 30 nm. Different detailed analyses proved that the CDs had good morphology, various functional groups, high water solubility, great optical features, and excellent stability under diverse environmental conditions. The ion detection showed that only Ag+ had the strongest fluorescence quenching effect on the CDs, however, the addition of S2- could recover their fluorescence. Based on these results, an "off-on" fluorescence sensor was achieved to selectively detect the concentration of S2- in real water samples with a limit of detection (LOD) of 39 μM, which further expanded the application of residues from traditional Chinese herbal medicine.

Photosensitized covalent organic framework as a light-induced oxidase mimic for colorimetric detection of uric acid

As large numbers of people are suffering from gout, an accurate, rapid, and sensitive method for the detection of gout biomarker, uric acid, is important for its effective control, diagnosis, and therapy. Although colorimetric detection methods based on uricase have been considered, they still have limitations as they produce toxic H2O2 and are expensive and not stable. Here, a novel uricase-free colorimetric method was developed for the sensitive and selective detection of uric acid based on the light-induced oxidase-mimicking activity of a new photosensitized covalent organic framework (COF) (2,4,6-trimethylpyridine-3,5-dicarbonitrile-4-[2-(4-formylphenyl)ethynyl]benzaldehyde COF [DCTP-EDA COF]). DCTP-EDA COF has a strong ability to harvest visible light, and it could catalyze the oxidation of 1,4-dioxane, 3,3',5,5'-tetramethylbenzidine under visible light irradiation to produce obvious color changes. With the addition of uric acid, however, the significant inhibition of the oxidase-mimicking activity of DCTP-EDA COF remarkably faded the color, and thus uric acid could be colorimetrically detected in the range of 2.0-150 μM with a limit of detection of 0.62 μM (3σ/K). Moreover, the present colorimetric method exhibited high selectivity; uric acid level in serum samples was successfully determined, and the recoveries ranged from 96.5% to 105.64%, suggesting the high accuracy of the present colorimetric method, which demonstrates great promise in clinical analysis.

Asterias forbesi-Inspired SERS Substrates for Wide-Range Detection of Uric Acid

Uric acid (UA), the final metabolite of purine, is primarily excreted through urine to maintain an appropriate concentration in the bloodstream. However, any malfunction in this process can lead to complications due to either deficiency or excess amount of UA. Hence, the development of a sensor platform with a wide-range detection is crucial. To realize this, we fabricated a surface-enhanced Raman spectroscopy (SERS) substrate inspired by a type of starfish with numerous protrusions, Asterias forbesi. The Asterias forbesi-inspired SERS (AF-SERS) substrate utilized an Au@Ag nanostructure and gold nanoparticles to mimic the leg and protrusion morphology of the starfish. This substrate exhibited excellent Raman performance due to numerous hotspots, demonstrating outstanding stability, reproducibility, and repeatability. In laboratory settings, we successfully detected UA down to a concentration of 1.16 nM (limit of detection) and demonstrated selectivity against various metabolites. In the experiments designed for real-world application, the AF-SERS substrate detected a broad range of UA concentrations, covering deficiencies and excesses, in both serum and urine samples. These results underscore the potential of the developed AF-SERS substrate as a practical detection platform for UA in real-world applications.

Ratiometric fluorescence detection of the angiotensin-converting enzyme via single-excitation and double-emission biomass-derived carbon quantum dots

Efficient and rapid detection of angiotensin-converting enzyme (ACE) activity is important for preventing hypertension and the discovery of new angiotensin-converting enzyme inhibitors (ACEI). In this work, a single-excitation and double-emission biomass-derived carbon quantum dots (CQDs) was prepared and applied for ratiometric fluorescence detection of ACE. Fresh banyan leaves were extracted with ethanol and acetone, and the extracted solution was used as the precursor to produce the carbon quantum dots (BL-CQDs) with single-excitation and double-emission properties. The synthesized BL-CQDs is about 1.7 nm, has a graphene-like structure, contains a variety of hydrophilic functional groups on the surface, and has good fluorescence properties. Its fluorescence intensity ratio (I677/I460) is linear with ACE activity in the range of 0.02-0.8 U l-1. The regression equation is△F=2.5371CACE-0.0311. The method was successfully applied to the determination of ACE activity in pig lung and human serum, and the inhibitory efficiency of the flavonoid extract and captopril tablets on ACE activity was also investigated, which can be applied to the screening of ACEI. The survival rate and fluorescence imaging of Bel-7404 cells under the condition of high concentration BL-CQDs showed BL-CQDs had low cytotoxicity and good biocompatibility. These results indicate that the BL-CQDs can be used as an excellent fluorescent probe, providing a new method for screening ACE activity and plant-derived ACEI.

Progress in optical sensors-based uric acid detection

The escalating number of patients affected by various diseases, such as gout, attributed to abnormal uric acid (UA) concentrations in body fluids, has underscored the need for rapid, efficient, highly sensitive, and stable UA detection methods and sensors. Optical sensors have garnered significant attention due to their simplicity, cost-effectiveness, and resistance to electromagnetic interference. Notably, research efforts have been directed towards UA on-site detection, enabling daily monitoring at home and facilitating rapid disease screening in the community. This review aims to systematically categorize and provide detailed descriptions of the notable achievements and emerging technologies in UA optical sensors over the past five years. The review highlights the advantages of each sensor while also identifying their limitations in on-site applications. Furthermore, recent progress in instrumentation and the application of UA on-site detection in body fluids is discussed, along with the existing challenges and prospects for future development. The review serves as an informative resource, offering technical insights and promising directions for future research in the design and application of on-site optical sensors for UA detection.

Target-triggered 'colorimetric-fluorescence' dual-signal sensing system based on the versatility of MnO2 nanosheets for rapid detection of uric acid

A simple dual-signal assay that combined colorimetric and fluorometric strategy for uric acid (UA) rapid detection was designed based on the versatility of facile synthesized MnO2 nanosheet. The oxidization of 3,3',5,5'-tetramethylbenzidine (TMB) and the fluorescence quenching of quantum dots (QDs) occurred simultaneously in the presence of MnO2 nanosheet. UA could decompose MnO2 nanosheet into Mn2+, resulting in the fluorescence recovery of QDs, along with the fading of the blue color of ox TMB. Based on the principles above, the detection of UA could be realized by the change of the dual signals (colorimetric and fluorometric). The linear range of the colorimetric mode was 5-60 μmol L-1, and the limit of detection (LOD) was 2.65 μmol L-1; the linear range of the fluorescence mode was wide at 5-120 μmol L-1, and the LOD could be as low as 1.33 μmol L-1. The method was successfully used for analyzing UA levels in human serum samples, indicating that this new dual-signal method could be applied in clinical diagnosis.

Carbon quantum dot fluorescent probe for labeling and imaging of stellate cell on liver frozen section below freezing point

The targeted labeling imaging of stellate cells on liver frozen section by immunofluorescence is a very promising visualization technique to study the distribution of stellate cells in the liver. In this study, water soluble carbon quantum dots that can emit blue, green and yellow fluorescence are synthesized by the hydrothermal method, and their sizes are 3.2, 3.7, and 4.3 nm, respectively. The three carbon quantum dots have good fluorescence stability, and the quantum yields are 36.1%, 26.3% and 21%, respectively. When the mass fraction of KCl in the blue carbon quantum dot dispersion system is 13%, it still maintains the liquid state at -30 °C. The final fluorescent probe is obtained after the carbon quantum dots are coupled with the secondary antibody, spectral characterizations confirm that the conjugate probe still maintains protein immunoactivity and has good stability. Cell experiments prove that the probe has good biocompatibility, the rabbit anti-mouse Desmin antibody is used as the primary antibody, the results of cellular immunofluorescence imaging and flow cytometry show that the probe can specifically label hepatic stellate cell at -20 °C. The results of liver frozen section experiments show that hepatic stellate cell can be specifically targeted and labeled by the fluorescent probe. This labeling technology provides an important technical means for elucidating the structure and function of the liver at the cellular level, exploring the liver pathological change, and designing and developing drug.

Activated cascade effect for dual-mode ratiometric and smartphone-assisted visual detection of curcumin and F- based on nitrogen-doped carbon dots

The growing persistence of harmful ion or drug molecular residues has always been considered as a matter of concern due to its importance in biological and environmental processes, which requires taking measures to maintain environmental health sustainably and effectively. Inspired by the multi-system and visual quantitative detection of nitrogen-doped carbon dots (N-CDs), we develop a novel cascade nano-system based on dual emission carbon dots for on-site visual quantitative detection of curcumin and fluoride ion (F^-). Herein, tris (hydroxymethyl) aminomethane (Tris) and m-dihydroxybenzene (m-DHB) are elected as reaction precursors to synthesize dual-emission N-CDs by a one-step hydrothermal method. The obtained N-CDs exhibit dual emission peaks at 426 nm (blue) and 528 nm (green) with quantum yields of 53 % and 71 %, respectively. Then, trace curcumin and F^- intelligent off-on-off sensing probe is formed by taking advantage of the activated cascade effect. As for the occurrence of inner filter effect (IFE) and fluorescence resonance energy transfer (FRET), the green fluorescence of N-CDs quenches remarkably, called as OFF initial state. Then the curcumin-F^- complex leads to the hypochromatic shift of the absorption band from 532 to 430 nm, which activates the green fluorescence of N-CDs, named as ON state. Meanwhile, the blue fluorescence of N-CDs is quenched due to the FRET, called as OFF terminal state. This system shows good linear relationships from 0 to 35 μM and 0 to 40 μM with low detection limits of 29 nM and 42 nM for curcumin and F^- ratiometric detection, respectively. Moreover, a smartphone-assisted analyzer is developed for on-site quantitative detection. Furthermore, we design a logic gate for logistics information storage, which proves the possibility of a logic gate based on N-CDs in practical application. Thus, our work will provide an effective strategy for environmental quantitative monitoring and information storage encryption.

The fabrication of N-doped carbon dots by methionine and their utility in sensing Cu2+ in real water

Copper ions (Cu²⁺) are ubiquitous in the ecosystem and cause serious environmental pollution, posing a threat to human health. Therefore, sensitive detection of Cu²⁺ is urgently needed. Herein, we employed a solvothermal method to prepare blue-emitting carbon dots (Met-CDs) using formamide (FA) and methionine (Met) as precursors, with a high quantum yield (QY) of 38%. Based on the good optical stability of Met-CDs and selective quenching by Cu²⁺, a sensitive probe using Met-CDs for the detection of Cu²⁺ in water was successfully designed. Within the linear range of 0.15-2 μM, the limit of detection (LOD) was determined to be as low as 47.7 nM, enabling the quantitative detection of Cu²⁺. Moreover, the recovery data of the spiked analysis of lake/river water samples were also satisfactory and verified the feasibility of the probe by the analysis of Cu²⁺ in natural conditions.

Fabrication of nitrogen-enriched carbon dots with green fluorescence for enzyme-free detection of uric acid

Based on the fact that UA directly quenched the green fluorescence of NCDs prepared at RT, a non-invasive sensor was developed.