Cataluminescence sensor based on Pt/NU-901 nanocomposite for rapid capture, catalysis and detection of acetone in exhaled breath

Recent progress of cataluminescence sensing based on gas-solid interfaces

Cataluminescence (CTL) has emerged as a sensing transduction principle of gas-solid interface for constructing gas sensors that present fast response, high sensitivity, and online monitoring. It has thus been widely associated with the field of chemical analysis and catalytic science. Herein, the latest developments in CTL sensors are reviewed, and the status quo of CTL-based gas sensing systems is discussed. In particular, the basic principles and sensing systems of CTL are outlined, including performance enhancement strategies for specific targets and recognition methods for multiple targets. Moreover, the important applications of CTL sensors are listed and classified, including environmental pollutant monitoring, product quality control, clinical diagnosis, and evaluation of catalyst performance. Finally, based on abundant case reports, the current conundrums of CTL sensors are summarized and their future development trends are also put forward.

Enhanced Cataluminescence Sensor Based on SiO2/MIL-53(Al) for Detecting Isobutylaldehyde

A simple, rapid, and reliable method for detecting harmful gases is urgently required in environmental security fields. In this study, a highly effective cataluminescence sensor based on SiO2/MIL-53(Al) composites was developed to detect trace isobutylaldehyde. The sensor was designed using isobutylaldehyde to generate an interesting cataluminescence phenomenon in SiO2/MIL-53(Al). Under optimized conditions, a positive linear relationship was observed between the signal intensity of the cataluminescence and isobutylaldehyde concentration. The isobutylaldehyde concentration range of 1.55-310 ppm responded well to the sensing test, with an excellent correlation coefficient of 0.9996. The minimum detectable concentration signal-to-noise ratio (S/N = 3) was found to be 0.49 ppm. In addition, the sensor was effectively utilized for analyzing trace isobutylaldehyde; the analysis resulted in recoveries ranging from 83.4% to 105%, with relative standard deviations (RSDs) of 4.8% to 9.4%. Furthermore, the mechanism of cataluminescence between SiO2/MIL-53(Al) and isobutylaldehyde was explored using GC-MS analysis and density functional theory. We expect that this cataluminescence methodology will provide an approach for the environmental monitoring of isobutylaldehyde.

Highly Selective and Fast Response/Recovery Cataluminescence Sensor Based on SnO2 for H2S Detection

In the present work, three kinds of nanosized SnO2 samples were successfully synthesized via a hydrothermal method with subsequent calcination at temperatures of 500 °C, 600 °C, and 700 °C. The morphology and structure of the as-prepared samples were characterized using X-ray diffraction, transmission electron microscopy, selected area electron diffraction, Brunauer-Emmett-Teller analysis, and X-ray photoelectron spectroscopy. The results clearly indicated that the SnO2 sample calcined at 600 °C had a higher amount of chemisorbed oxygen than the SnO2 samples calcined at 500 °C and 700 °C. Gas sensing investigations revealed that the cataluminescence (CTL) sensors based on the three SnO2 samples all exhibited high selectivity toward H2S, but the sensor based on SnO2-600 °C exhibited the highest response under the same conditions. At an operating temperature of 210 °C, the SnO2-600 °C sensor showed a good linear response to H2S in the concentration range of 20-420 ppm, with a detection limit of 8 ppm. The response and recovery times were 3.5 s/1.5 s for H2S gas within the linear range. The study on the sensing mechanism indicated that H2S was oxidized into excited states of SO2 by chemisorbed oxygen on the SnO2 surface, which was mainly responsible for CTL emission. The chemisorbed oxygen played an important role in the oxidation of H2S, and, as such, the reason for the SnO2-600 °C sensor showing the highest response could be ascribed to the highest amount of chemisorbed oxygen on its surface. The proposed SnO2-based gas sensor has great potential for the rapid monitoring of H2S.