Detection of trace antimony by vanadium (IV) ion assisted photochemical vapor generation with inductively coupled plasma mass spectrometry measurement

Detecting antimony(III) on-site using novel gel-based techniques: Colorimetric diffusive equilibrium in thin films for two-dimensional imaging and surface-enhanced Raman scattering for sensitive quantification

Antimony (Sb) pollution has raised increasing public concerns and its rapid on-site screening is central for the risk assessment. Herein, we proposed two gel-based methods based on colorimetric diffusive equilibrium in thin films (DET) and surface-enhanced Raman scattering (SERS), for two-dimensional imaging and sensitive detection of Sb(III) by revisiting the phenylfluorone (PhF) complexation reaction. PhF was well dispersed in the polyvinyl alcohol (PVA) hydrogel and reacted with Sb(III) in the DET gel to form a strong PhF-Sb(III) complex. The distribution of Sb(III) was easily visualized at a submillimeter resolution using computer imaging densitometry, with a detection limit (LOD) of ∼100 nmol L-1. Field application in the Sb mine area reveals limited dissolved Sb(III) penetrating the redox barrier below the sediment-water interface by 20 mm in rivers and tailing pond sediments. To improve the detection sensitivity and apply the principle to trace Sb quantification, a SERS platform was established by anchoring PhF on the hydrogel-stabilized Ag nanoparticles via C-O-Ag bonding to specifically detect Raman-inactive Sb(III). Benefiting from the high SERS activity of PhF and enrichment ability of hydrogel, Sb(III) was quantified with a LOD of 1.2-10.7 nmol L-1 depending on the sample volume. The coexisting ions at a 100-fold higher concentration than Sb(III) resulted in only 3.3-10.4 % variation in SERS intensity, indicating a negligible interference on the SERS platform. The platform exhibited a RSD of 6.6-13.1 % and acceptable recoveries for various environmental matrices, highlighting its promise in on-site application.

Design and synthesis of pyrene-based probes and their fluorescent detection of Sb(III)

A series of pyrene-based fluorescent (FL) probes for Sb(III) were designed and synthesized. All of them exhibited luminescence by pyrene excimers in the mixture of DMSO and water and showed enhanced emission with the addition of Sb(III). By comparing their FL response to Sb(III), the effects of intramolecular hydrogen bond, inductive effect, and steric effect were investigated. Meanwhile, the FL enhancement factor of the best performing probe reached 10.28 and the detection limit was calculated to be 0.0535 mg/L, indicating that it might be used as a potential candidate for the treatment of Sb(III) in printing and dyeing wastewater.

Sensitive Determination of Arsenic by Photochemical Vapor Generation with Inductively Coupled Plasma Mass Spectrometry: Synergistic Effect from Antimony and Cadmium

A novel method for the determination of trace arsenic (As) by photochemical vapor generation (PVG) with inductively coupled plasma mass spectrometry measurement was developed in this study. The synergistic effect from antimony (Sb) and cadmium (Cd) was found for the photochemical reduction of As for the first time. Effective photochemical reduction of As was obtained in the system containing 10% (v/v) acetic acid, 5.0 mg L-1 Sb(III), and 20.0 mg L-1 Cd(II) with 100 s UV irradiation. Analytical sensitivity of As(III) was comparable with that of As(V) under the tested conditions, making direct determination of total As feasible. Compared to the pneumatic nebulization method, analytical sensitivity of the developed method was enhanced about 50 folds. The PVG efficiency was estimated up to be 99 ± 3%. The limit of detection (LOD) (3σ) was found to be 2.1 ng L-1 for As, which was improved about 30-fold compared to that using direct sample introduction solution nebulization. Considering the sample dilution prior to analysis (usually one-fold), the LOD was actually enhanced about 15 folds. The relative standard deviations of seven replicate measurements of 1.0 μg L-1 As(III) and As (V) standard solutions were 2.3 and 2.9% for As(III) and As(V), respectively. The proposed method was successfully applied for the detection of As in certified reference materials of sediments (GBW07303a and GBW07305a), as well as three water samples. The mechanism of the PVG system was investigated by using gas chromatography mass spectrometry, electron paramagnetic resonance, and X-ray photoelectron spectroscopy. (CH3)3As along with (CH3)3Sb were synthesized under UV irradiation. Besides, volatile species of Cd were also found. The result obtained in this study is useful for developing efficient "sensitizers" in PVG and understanding the transformation of As in the presence of hydride/cold vapor forming elements in the photochemical process.

Sensitive Silver-Enhanced Microplate Apta-Enzyme Assay of Sb3+ Ions in Drinking and Natural Waters

The toxic effects of antimony pose risks to human health. Therefore, simple analytical techniques for its widescale monitoring in water sources are in demand. In this study, a sensitive microplate apta-enzyme assay for Sb3+ detection was developed. The biotinylated aptamer A10 was hybridized with its complementary biotinylated oligonucleotide T10 and then immobilized on the surface of polysterene microplate wells. Streptavidin labeled with horseradish peroxidase (HRP) bound to the biotin of a complementary complex and transformed the 3,3',5,5'-tetramethylbenzidine substrate, generating an optical signal. Sb3+ presenting in the sample bounded to an A10 aptamer, thus releasing T10, preventing streptavidin-HRP binding and, as a result, reducing the optical signal. This effect allowed for the detection of Sb3+ with a working range from 0.09 to 2.3 µg/mL and detection limit of 42 ng/mL. It was established that the presence of Ag+ at the stage of A10/T10 complex formation promoted dehybridization of the aptamer A10 and the formation of the A10/Sb3+ complex. The working range of the Ag+-enhanced microplate apta-enzyme assay for Sb3+ was determined to be 8-135 ng/mL, with a detection limit of 1.9 ng/mL. The proposed enhanced approach demonstrated excellent selectivity against other cations/anions, and its practical applicability was confirmed through an analysis of drinking and spring water samples with recoveries of Sb3+ in the range of 109.0-126.2% and 99.6-106.1%, respectively.