An anti-fouling wearable molecular imprinting sensor based on semi-interpenetrating network hydrogel for the detection of tryptophan in sweat

Antifouling and antimicrobial wearable electrochemical sweat sensors for accurate dopamine monitoring based on amyloid albumin composite hydrogels

Wearable electrochemical sweat sensors are potentially promising for health monitoring in a continuous and non-invasive mode with high sensitivity. However, due to the complexity of sweat composition and the growth of skin bacteria, the wearable sweat sensors may gradually lose their sensitivity or even fail over time. To deal with this issue, herein, we proposed a new strategy to construct wearable sweat sensors with antifouling and antimicrobial capabilities. Amyloid albumin hydrogels (ABSAG) were doped with two-dimensional (2D) nanomaterial MXene and CeO2 nanorods to obtain the antifouling and antimicrobial amyloid albumin composite hydrogels (ABSACG, CeO2/MXene/ABSAG), and the wearable sensors were prepared by modifying flexible screen-printed electrodes with the ABSACG. Within this sensing system, the hydrophilic ABSAG possesses strong hydration capability, and it can form a hydration layer on the electrode surface to resist biofouling in sweat. The 2D nanomaterial MXene dispersed in the hydrogel endows the hydrogel with good conductivity and electrocatalytic capability, while the doping of CeO2 nanorods further improves the electrocatalytic performance of the hydrogel and also provides excellent antimicrobial capability. The designed wearable electrochemical sensors based on the ABSACG demonstrated satisfying antifouling and antimicrobial abilities, and they were capable of detecting dopamine accurately in human sweat. It is expected that wearable sensors utilizing the antifouling and antimicrobial ABSACG may find practical applications in human body fluids analysis and health monitoring.

Label-Free Mode Based on Ferrocene/PEDOT:PSS-PPy for Molecularly Imprinted Electrochemically Ultrasensitive Detection of Amino Acids

Generally, molecularly imprinted (MIP) electrochemical sensors for amino acids operate in a "label-like" mode. That is, after an amino acid is specifically recognized by an imprinted cavity at the sensing interface, the amino acid itself provides the sensing signal for quantitative detection. However, poorly electroactive amino acids impede electron transfer at the sensing interface and require high potentials to drive the reaction; thus, more interfering reactions tend to be triggered in practical applications, causing enhanced background noise in the detection. To address these issues, a "label-free" mode of the MIP sensor based on the ferrocene (Fc)/PEDOT:PSS-polypyrrole (PPy) composite was designed for the first time. The Fc/PEDOT:PSS-PPy is drop coated on the electrode surface as a substrate, and MIP polymers with specific recognition ability are immobilized on the substrate via electrostatic adsorption. As a proof of concept, l-tyrosine (l-Tyr) was selected as a model analyte and the "label-free" mode MIP/Fc/PEDOT:PSS-PPy sensor was constructed. The limit of detection (LOD) and linearity range of the MIP/Fc/PEDOT:PSS-PPy sensor were 2.31 × 10-11 M and from 100 pM to 5 mM, respectively. Compared with the label-like mode, the LOD was three orders of magnitude lower, the linear range was increased by three orders of magnitude, and the sensitivity was improved by more than four times. This work provides a universal and effective concept for MIP electrochemical sensing of amino acids.

Development of ZrO(OH)2@HCS co-modified molecularly imprinted gel-based electrochemical sensing platform for sensitive and selective detection of tert-butylhydroquinone in foods

Herein, a novel molecularly imprinted gel (MIG)-based electrochemical sensor equipped with hydrated zirconium oxide@hollow carbon spheres (ZrO(OH)2@HCS) was developed for highly sensitive and selective detection of tert-butylhydroquinone (TBHQ) in foods. The MIG was synthesized by using L-histidine to rapidly cross-link cationic guar gum, acrylamide and TBHQ through intermolecular hydrogen bonds and electrostatic interactions at room temperature, which offered outstanding specific recognition performance for TBHQ. ZrO(OH)2@HCS possessing excellent conductivity and water dispersibility was employed for signal amplification. Under optimal conditions, the MIG-ZrO(OH)2@HCS/GCE sensor showed a wide dynamic detection range (0.025-100 μM) with a low limit of detection (6.7 nM). TBHQ recovery experiments were conducted in spiked peanut oil and milk powder, yielding excellent recoveries. Moreover, the sensor was successfully utilized to detect TBHQ levels in snowflake chicken cutlets, crispy fried pork and boneless chicken fillets, and the results were in agreement with those obtained by the high performance liquid chromatography method.

Wearable biosensors in cardiovascular disease

This review provides a comprehensive overview of the latest advancements in wearable biosensors, emphasizing their applications in cardiovascular disease monitoring. Initially, the key sensing signals and biomarkers crucial for cardiovascular health, such as electrocardiogram, phonocardiography, pulse wave velocity, blood pressure, and specific biomarkers, are highlighted. Following this, advanced sensing techniques for cardiovascular disease monitoring are examined, including wearable electrophysiology devices, optical fibers, electrochemical sensors, and implantable cardiac devices. The review also delves into hydrogel-based wearable electrochemical biosensors, which detect biomarkers in sweat, interstitial fluids, saliva, and tears. Further attention is given to flexible electronics-based biosensors, including resistive, capacitive, and piezoelectric force sensors, as well as resistive and pyroelectric temperature sensors, flexible biochemical sensors, and sensor arrays. Moreover, the discussion extends to polymer-based wearable sensors, focusing on innovations in contact lens, textile-type, patch-type, and tattoo-type sensors. Finally, the review addresses the challenges associated with recent wearable biosensing technologies and explores future perspectives, highlighting potential groundbreaking avenues for transforming wearable sensing devices into advanced diagnostic tools with multifunctional capabilities for cardiovascular disease monitoring and other healthcare applications.

The Unprecedented Biodegradable Polyzwitterion: A Removal-Free Patch for Accelerating Infected Diabetic Wound Healing

Zwitterionic polymers have emerged as an important class of biomaterials to construct wound dressings and antifouling coatings over the past decade due to their excellent hydrophilicity. However, all the reported zwitterionic polymers as wound dressings are nondegradable because of noncleavable carbon─carbon bonding backbones, and must be removed periodically after treatment to avoid hypoxia in the wound, thus leading to potential secondary injury. In this work, a biodegradable polyzwitterion patch is fabricated for the first time by ring-opening polymerization of carboxybetaine dithiolane (CBDS), which is self-crosslinked via inter-amide hydrogen bonds and zwitterionic dipole-dipole interactions on the side chains. The unprecedented polyCBDS (PCBDS) patch demonstrates enough ductility owing to the intermolecular physical interactions to fully cover irregular wounds, also showing excellent biodegradability and antifouling performance resulted from the existence of disulfide bonds and carboxybetaine groups. Besides, the PCBDS degradation-induced released CBDS owns potent antioxidant and antibacterial activities. This PCBDS patch is used as a diabetic wound dressing, inhibiting bacterial adhesion on the external surface, and its degradation products can exactly kill bacteria and scavenge excessive reactive oxygen species (ROS) at the wound site to regulate local microenvironment, including regulation of cytokine express and macrophage polarization, accelerating infected diabetic wound repair, and also avoiding the potential secondary injury.

Recent Advances in Conductive Polymers-Based Electrochemical Sensors for Biomedical and Environmental Applications

Electrochemical sensors play a pivotal role in various fields, such as biomedicine and environmental detection, due to their exceptional sensitivity, selectivity, stability, rapid response time, user-friendly operation, and ease of miniaturization and integration. In addition to the research conducted in the application field, significant focus is placed on the selection and optimization of electrode interface materials for electrochemical sensors. The detection performance of these sensors can be significantly enhanced by modifying the interface of either inorganic metal electrodes or printed electrodes. Among numerous available modification materials, conductive polymers (CPs) possess not only excellent conductivity exhibited by inorganic conductors but also unique three-dimensional structural characteristics inherent to polymers. This distinctive combination allows CPs to increase active sites during the detection process while providing channels for rapid ion transmission and facilitating efficient electron transfer during reaction processes. This review article primarily highlights recent research progress concerning CPs as an ideal choice for modifying electrochemical sensors owing to their remarkable features that make them well-suited for biomedical and environmental applications.

A stretchable wearable sensor with dual working electrodes for reliable detection of uric acid in sweat

Wearable sweat sensors with stretch capabilities and robust performances are desired for continuous monitoring of human health, and it remains a challenge for sweat sensors to detect targets reliably in both static and dynamic states. Herein, a flexible sweat sensor was created using a cost-effective approach involving the utilization of three-dimensional graphene foam and polydimethylsiloxane (PDMS). The flexible electrochemical sensor was fabricated based on PDMS and Pt/Pd nanoparticles modified 3D graphene foam for the detection of uric acid in sweat. Pt/Pd nanoparticles were electrodeposited on the graphene foam to markedly enhance the electrocatalytic activity for uric acid detection. The graphene foam with excellent electrical property and high porosity, and PDMS with an ideal mechanical property endow the sensing device with high stretchability (tolerable strain up to 110 %), high sensitivity (0.87 μA μM-1 cm-2), and stability (remaining unchanged for more than 5000 cycles) for daily wear. To eliminate possible interferences, the wearable sensor was designed with dual working electrodes, and their response difference ensured reliable and accurate detection of targets. This strategy of constructing sweat sensors with dual working electrodes based on the flexible composite material represents a promising way for the development of robust wearable sensing devices.