Temporally targeted imaging method applied to ECG-gated computed tomography: preliminary phantom and in vivo experience

An Empirical Data Inconsistency Metric (DIM) Driven CT Image Reconstruction Method

Current computed tomography (CT) image reconstruction methods generally assume that a complete and consistent data set was acquired during data acquisition. In practice, however, the acquired data are often not consistent from one view angle to another. In this case, the application of a well-developed image reconstruction algorithm to an inconsistent data set still generates artifacts in the reconstructed images. Therefore, it is highly desirable to develop a simple method to classify the acquired data set into several consistency classes and to incorporate the data consistency information into an image reconstruction framework to simultaneously reconstruct several sub-images of the same image object according to the data consistency level of the acquired data set. In this paper, an empirical data inconsistency metric (DIM) was introduced to characterize the inconsistency level of the acquired cone beam CT projection data at each view angle caused by the polychromatic X-ray spectrum and the use of tube potential modulation. The entire acquired data set is then sorted into several subsets of view angles based upon the value of the DIM at each view angle. After data classification, the previously published algorithm, synchronized multiartifact reduction with tomographic reconstruction, was applied to simultaneously reconstruct images for these sub-images in different spectral consistency classes. Each sub-image is consistent with the subset of the projection view angles for a given range of DIM values. To validate the method, numerical simulation studies from an anthropomorphic numerical phantom, a hybrid phantom of known truth with human anatomy, and in vivo human subject data were conducted to demonstrate the practical utility of the proposed method.

Synchronized multiartifact reduction with tomographic reconstruction (SMART-RECON): A statistical model based iterative image reconstruction method to eliminate limited-view artifacts and to mitigate the temporal-average artifacts in time-resolved CT

PURPOSE

In x-ray computed tomography (CT), a violation of the Tuy data sufficiency condition leads to limited-view artifacts. In some applications, it is desirable to use data corresponding to a narrow temporal window to reconstruct images with reduced temporal-average artifacts. However, the need to reduce temporal-average artifacts in practice may result in a violation of the Tuy condition and thus undesirable limited-view artifacts. In this paper, the authors present a new iterative reconstruction method, synchronized multiartifact reduction with tomographic reconstruction (SMART-RECON), to eliminate limited-view artifacts using data acquired within an ultranarrow temporal window that severely violates the Tuy condition.

METHODS

In time-resolved contrast enhanced CT acquisitions, image contrast dynamically changes during data acquisition. Each image reconstructed from data acquired in a given temporal window represents one time frame and can be denoted as an image vector. Conventionally, each individual time frame is reconstructed independently. In this paper, all image frames are grouped into a spatial-temporal image matrix and are reconstructed together. Rather than the spatial and/or temporal smoothing regularizers commonly used in iterative image reconstruction, the nuclear norm of the spatial-temporal image matrix is used in SMART-RECON to regularize the reconstruction of all image time frames. This regularizer exploits the low-dimensional structure of the spatial-temporal image matrix to mitigate limited-view artifacts when an ultranarrow temporal window is desired in some applications to reduce temporal-average artifacts. Both numerical simulations in two dimensional image slices with known ground truth and in vivo human subject data acquired in a contrast enhanced cone beam CT exam have been used to validate the proposed SMART-RECON algorithm and to demonstrate the initial performance of the algorithm. Reconstruction errors and temporal fidelity of the reconstructed images were quantified using the relative root mean square error (rRMSE) and the universal quality index (UQI) in numerical simulations. The performance of the SMART-RECON algorithm was compared with that of the prior image constrained compressed sensing (PICCS) reconstruction quantitatively in simulations and qualitatively in human subject exam.

RESULTS

In numerical simulations, the 240(∘) short scan angular span was divided into four consecutive 60(∘) angular subsectors. SMART-RECON enables four high temporal fidelity images without limited-view artifacts. The average rRMSE is 16% and UQIs are 0.96 and 0.95 for the two local regions of interest, respectively. In contrast, the corresponding average rRMSE and UQIs are 25%, 0.78, and 0.81, respectively, for the PICCS reconstruction. Note that only one filtered backprojection image can be reconstructed from the same data set with an average rRMSE and UQIs are 45%, 0.71, and 0.79, respectively, to benchmark reconstruction accuracies. For in vivo contrast enhanced cone beam CT data acquired from a short scan angular span of 200(∘), three 66(∘) angular subsectors were used in SMART-RECON. The results demonstrated clear contrast difference in three SMART-RECON reconstructed image volumes without limited-view artifacts. In contrast, for the same angular sectors, PICCS cannot reconstruct images without limited-view artifacts and with clear contrast difference in three reconstructed image volumes.

CONCLUSIONS

In time-resolved CT, the proposed SMART-RECON method provides a new method to eliminate limited-view artifacts using data acquired in an ultranarrow temporal window, which corresponds to approximately 60(∘) angular subsectors.

Diffuse lung disease: CT of the chest with adaptive statistical iterative reconstruction technique

PURPOSE

To compare visualization of subtle normal and abnormal findings at computed tomography (CT) of the chest for diffuse lung disease with images reconstructed with filtered back projection and adaptive statistical iterative reconstruction (ASIR) techniques.

MATERIALS AND METHODS

In this HIPAA-compliant, institutional review board-approved study, 24 patients underwent 64-section multi-detector row CT of the chest for evaluation of diffuse lung disease. Scanning parameters included a pitch of 0.984:1 and 120 kVp in thin-section mode, with 2496 views per rotation compared with 984 views acquired for normal mode. The 0.625-mm-thick images were reconstructed with filtered back projection, ASIR, and ASIR high-definition (ASIR-HD) kernels. Two thoracic radiologists independently assessed the filtered back projection, ASIR, and ASIR-HD images for small anatomic details (interlobular septa, centrilobular region, and small bronchi and bronchioles), abnormal findings (reticulation, tiny nodules, altered attenuation, bronchiectasis), image quality (graded by using a six-point scale, where 1 = excellent image quality, and 5 = interpretation impossible), image noise, and artifacts. Data were tabulated for statistical testing.

RESULTS

For visualization of normal and pathologic structures, CT image series reconstructed with ASIR-HD were rated substantially better than those reconstructed with filtered back projection and ASIR (P < .001). ASIR-HD images were superior to filtered back projection images in 15 of 24 (62%) patients for visualization of normal structures and in 24 of 24 (100%) patients for pathologic findings. ASIR-HD was superior to ASIR in three of 24 (12%) images for normal anatomic findings and in seven of 24 (29%) images for pathologic evaluation. None of the images in the three groups were rated as unacceptable for noise (P < .001).

CONCLUSION

ASIR-HD reconstruction results in superior visualization of subtle and tiny anatomic structures and lesions in diffuse lung disease compared with ASIR and filtered back projection reconstructions.