Electrochemical characterization of cast Ti-Hf binary alloys

Mixed oxide nanotubes in nanomedicine: A dead-end or a bridge to the future?

Nanomedicine has seen a significant rise in the development of new research tools and clinically functional devices. In this regard, significant advances and new commercial applications are expected in the pharmaceutical and orthopedic industries. For advanced orthopedic implant technologies, appropriate nanoscale surface modifications are highly effective strategies and are widely studied in the literature for improving implant performance. It is well-established that implants with nanotubular surfaces show a drastic improvement in new bone creation and gene expression compared to implants without nanotopography. Nevertheless, the scientific and clinical understanding of mixed oxide nanotubes (MONs) and their potential applications, especially in biomedical applications are still in the early stages of development. This review aims to establish a credible platform for the current and future roles of MONs in nanomedicine, particularly in advanced orthopedic implants. We first introduce the concept of MONs and then discuss the preparation strategies. This is followed by a review of the recent advancement of MONs in biomedical applications, including mineralization abilities, biocompatibility, antibacterial activity, cell culture, and animal testing, as well as clinical possibilities. To conclude, we propose that the combination of nanotubular surface modification with incorporating sensor allows clinicians to precisely record patient data as a critical contributor to evidence-based medicine.

Design of high-ductile medium entropy alloys for dental implants

Developing new materials with high strength and ductility, low modulus and high biocompatibility is a continuing demand in the field of surgical implants. Inspired by the high-entropy design philosophy, two medium entropy alloys (MEAs), i.e. equiatomic TiZrHf and equi-weight Ti₄₀Zr₂₀Hf₁₀Nb₂₀Ta₁₀ were designed and their mechanical properties and biocompatibility were assessed. Both the single-phase hexagonal close-packed (HCP) structured TiZrHf alloy and the single-phase body-centered cubic (BCC) structured Ti₄₀Zr₂₀Hf₁₀Nb₂₀Ta₁₀ alloy show high strength-ductility combinations close to commercial Ti-6Al-4V wrought alloy and remarkably lower young's modulus than commercial pure titanium (CP-Ti) and Ti-6Al-4V. From the aspects of adhesion, proliferation, toxicity and related gene expression of human gingival fibroblasts (HGFs), the Ti₄₀Zr₂₀Hf₁₀Nb₂₀Ta₁₀ alloy exhibits distinctively better biocompatibility than that of CP-Ti while the TiZrHf shows only slightly better biocompatibility as compared with CP-Ti. These results indicate that these two ductile MEAs are potential candidates for dental application.

Electronic Origin of α″ to β Phase Transformation in Ti-Nb-Based Thin Films upon Hf Microalloying

We present results on thin Ti-Nb-based films containing Hf at various concentrations grown by magnetron sputtering. The films exhibit α" patterns at Hf concentrations up to 11 at.%, while at 16 at.% Hf, the β-phase emerges as a stable structure. These findings were consolidated by ab initio calculations, according to which the α"-β transformation is manifested in the calculation of the electronic band energies for Hf contents between 11 and 18 at.%. It turns out that the β-phase transition originates from the Hf 5d contributions at the Fermi level and the Hf 6s hybridizations at low energies in the electronic density of states. Bonding-anti-bonding first neighbor features existing in the shifted plane destabilize the α″-phase, especially at high Hf concentrations, while the covalent-like features in the first neighborhood stabilize the corresponding plane of the β-phase. Thin films measurements and bulk total energy calculations agree that the lattice constants of both α″ and β phases increase upon Hf substitution. These results are important for the understanding of β-Ti-based alloys formation mechanisms and can be used for the design of suitable biocompatible materials.

Mechanical and physicochemical characterization along with biological interactions of a new Ti25Nb21Hf alloy for bone tissue engineering

Nowadays, one of the main challenges in metal implants for bone substitution is the achievement of an elastic modulus close to that of human cortical bone as well as to provide an adequate interaction with the surrounding tissue avoiding in vivo foreign body reaction. From this perspective, a new Ti-based alloy has been developed with Nb and Hf as alloying elements which are known as non-toxic and with good corrosion properties. The microstructure, mechanical behaviour and the physicochemical properties of this novel titanium alloy have been studied. Relationship of surface chemistry and surface electric charge with protein adsorption and cell adhesion has been evaluated due to its role for understanding the mechanism of biological interactions with tissues. The Ti25Nb21Hf alloy presented a lower elastic modulus than commercial alloys with a superior ultimate strength and yield strength than CP-Ti and very close to Ti6Al4V. It also exhibited good corrosion resistance. Furthermore, the results revealed that it had no cytotoxic effect on rat mesenchymal stem cells and allowed protein adsorption and cell adhesion. The experimental results make this alloy a promising material for bone substitution or for biomedical devices.

Microstructure, mechanical properties, castability and in vitro biocompatibility of Ti-Bi alloys developed for dental applications

In this study, the microstructure, mechanical properties, castability, electrochemical behaviors, cytotoxicity and hemocompatibility of Ti-Bi alloys with pure Ti as control were systematically investigated to assess their potential applications in the dental field. The experimental results showed that, except for the Ti-20Bi alloy, the microstructure of all other Ti-Bi alloys exhibit single α-Ti phase, while Ti-20Bi alloy is consisted of mainly α-Ti phase and a small amount of BiTi2 and BiTi3 phases. The tensile strength, hardness and wear resistance of Ti-Bi alloys were demonstrated to be improved monotonically with the increase of Bi content. The castability test showed that Ti-2Bi alloy increased the castability of pure Ti by 11.7%. The studied Ti-Bi alloys showed better corrosion resistance than pure Ti in both AS (artificial saliva) and ASFL (AS containing 0.2% NaF and 0.3% lactic acid) solutions. The concentrations of both Ti ion and Bi ion released from Ti-Bi alloys are extremely low in AS, ASF (AS containing 0.2% NaF) and ASL (AS containing 0.3% lactic acid) solutions. However, in ASFL solution, a large number of Ti and Bi ions are released. In addition, Ti-Bi alloys produced no significant deleterious effect to L929 cells and MG63 cells, similar to pure Ti, indicating a good in vitro biocompatibility. Besides, both L929 and MG63 cells perform excellent cell adhesion ability on Ti-Bi alloys. The hemolysis test exhibited that Ti-Bi alloys have an ultra-low hemolysis percentage below 1% and are considered nonhemolytic. To sum up, the Ti-2Bi alloy exhibits the optimal comprehensive performance and has great potential for dental applications.

Interaction between mesenchymal stem cells and Ti-30Ta alloy after surface treatment

In this study, in vitro cytocompatibility was investigated in the Ti-30Ta alloy after two kinds of surfaces treatments: alkaline and biomimetic treatment. Each condition was evaluated by scanning electron microscopy/energy-dispersive X-ray spectroscopy. Cellular adhesion, viability, protein expression, morphology, and differentiation were evaluated with Bone marrow stromal cells (MSCs) to investigate the short and long-term cellular response by fluorescence microscope imaging and colorimetric assays techniques. Two treatments exhibited similar results with respect to total protein content and enzyme activity as compared with alloy without treatment. However, it was observed improved of the biomineralization, bone matrix formation, enzyme activity, and MSCs functionality after biomimetic treatment. These results indicate that the biomimetic surface treatment has a high potential for enhanced osseointegration.

Ti-Ge binary alloy system developed as potential dental materials

As-cast Ti-xGe (x = 2, 5, 10, 20 wt %) binary alloys were produced in this work, and various experiments were carried out to investigate the microstructure, mechanical properties, in vitro electrochemical and immersion corrosion behaviors as well as cytotoxicity with as-cast pure Ti as control, aiming to study the feasibility of Ti-xGe alloy system as potential dental materials. The microstructure of Ti-xGe alloys changes from single α-Ti phase to α-Ti + Ti(5)Ge(3) precipitation phase with the increase of Ge content. Mechanical tests show that Ti-5Ge alloy has the best comprehensive mechanical properties. The corrosion behavior of Ti-xGe alloys in artificial saliva with different NaF and lactic acid addition at 37°C indicates that Ti-2Ge and Ti-5Ge alloys show better corrosion resistance to fluorine-containing solution. The cytotoxicity test indicates that Ti-xGe alloy extracts show no obvious reduction of cell viability to L-929 fibroblasts and MG-63 osteosarcoma cells, similar to pure Ti which is generally acknowledged to be biocompatible. Considering all these results, Ti-2Ge and Ti-5Ge alloys possess the optimal comprehensive performance and might be used as potential dental materials.

Corrosion characteristics of anodized Ti-(10-40wt%)Hf alloys for metallic biomaterials use

The effect of anodizing on corrosion resistance of Ti-xHf alloys has been investigated. Ti-xHf alloys were prepared and anodized at 120, 170 and 220 V in 1 M H(3)PO(4) solution, and crystallized at 300 and 500°C. Corrosion experiments were carried out using a potentiostat in 0.15 M NaCl solution at 36.5 ± 1°C. The Ti-xHf alloys exhibited the α' and anatase phases. The pore size on the anodized surface increases as the applied voltage is increased, whereas the pore size decreases as the Hf content is increased. The anodized Ti-xHf alloys exhibited better corrosion resistance than non-anodized Ti-xHf alloys.

Corrosion behaviour of β-Ti20Mo alloy in artificial saliva

To evaluate the potential of β-Ti20Mo alloy as a dental material, we tested its corrosion behaviour in artificial saliva in comparison to that of cp-Ti. Open-circuit potential (E(OC)), potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) were used as electrochemical methods to characterize the corrosion behaviour of Ti20Mo alloy and cp-Ti, respectively. Corrosion current and passive current densities obtained from the polarization curves showed low values indicating a typical passive behaviour for Ti20Mo alloy. The EIS technique enabled us to study the nature of the passive film formed on the binary Ti20Mo alloy at various imposed potentials. The Bode phase spectra obtained for Ti20Mo alloy in artificial saliva exhibited two-time constants at higher potential (0.5 V, 1.0 V), indicating a two-layer structure. According to our experimental measurements, Ti20Mo alloy appears to possess superior corrosion resistance to that of cp-Ti in artificial saliva.

Comparative corrosion study of Ti-Ta alloys for dental applications

Besides other important material features, the corrosion parameters and corrosion products are responsible for limiting the biocompatibility of metallic materials, and can produce undesirable reactions in implant-adjacent and/or more distant tissues. Titanium and some of its alloys are known as being the most biocompatible metallic materials due to their high strength, low modulus, high corrosion resistance in biological media, etc. More recently, Ti-Ta alloys have been developed, and these are expected to become more promising candidates for biomedical and dental applications than commercially pure Ti, Ti-6Al-4V or Ti-6Al-7Nb alloy. The corrosion behavior of the studied Ti-Ta alloys with Ta contents of 30, 40, 50 and 60 wt.% together with the currently used Ti-6Al-7Nb alloy were investigated for dental applications. All alloys were tested by open-circuit potential measurement, linear polarization, potentiodynamic polarization, coulometric zone analysis and electrochemical impedance spectroscopy performed in artificial saliva with different pH, acid lactic and fluoride contents. The passive behavior for all the titanium alloys is observed for artificial saliva, acidified saliva (9.8 gl(-1) lactic acid, pH 2.5) and for fluoridated saliva (1.0 gl(-1) F(-), pH 8). A decrease in corrosion resistance and less protective passive oxide films are observed for all titanium alloys in fluoridated acidified saliva (9.8 gl(-1) lactic acid, 1.0 gl(-1) F(-), pH 2.5) in regard to other electrochemical media used within this work. It is worthy of note that the most important decrease was found for Ti-6Al-7Nb alloy. These conclusions are confirmed by all the electrochemical tests undertaken. However, the results confirm that the corrosion resistance of the studied Ti-Ta alloys in all saliva is better or similar to that of Ti-6Al-7Nb alloy, suggesting that the Ti-Ta alloys have potential for dental applications.