Conversion of sea urchin spines to Mg-substituted tricalcium phosphate for bone implants

A natural multifunction and multiscale hierarchical matrix as a drug-eluting scaffold for biomedical applications

Sea urchin spines are biogenic single crystals of magnesium calcite that are stiff, strong, damage tolerant and light and have a bicontinuous porous structure. Here, we showed that the removal of their intraskeletal organic matrix materials did not affect the compressive mechanical properties and generated an open porosity. This matrix was able to adsorb and release oxytetracycline, a broad-spectrum antibiotic. The drug-loaded sea urchin matrix induced bacterial cell death after 4 and 8 hours of incubation of both Gram-negative E. coli and Gram-positive S. aureus strains and this process induces an inhibition of bacterial cell adhesion. In conclusion, this study shows that thermally treated sea urchin spines are a compressive resistant and lightweight matrix able to load drugs and with potential use in spine fusion, a challenging application that requires withstanding high compressive loading.

Magnesium-Rich Calcium Phosphate Derived from Tilapia Bone Has Superior Osteogenic Potential

We extracted magnesium-rich calcium phosphate bioceramics from tilapia bone using a gradient thermal treatment approach and investigated their chemical and physicochemical properties. X-ray diffraction showed that tilapia fish bone-derived hydroxyapatite (FHA) was generated through the first stage of thermal processing at 600-800 °C. Using FHA as a precursor, fish bone biphasic calcium phosphate (FBCP) was produced after the second stage of thermal processing at 900-1200 °C. The beta-tricalcium phosphate content in the FBCP increased with an increasing calcination temperature. The fact that the lattice spacing of the FHA and FBCP was smaller than that of commercial hydroxyapatite (CHA) suggests that Mg-substituted calcium phosphate was produced via the gradient thermal treatment. Both the FHA and FBCP contained considerable quantities of magnesium, with the FHA having a higher concentration. In addition, the FHA and FBCP, particularly the FBCP, degraded faster than the CHA. After one day of degradation, both the FHA and FBCP released Mg²⁺, with cumulative amounts of 4.38 mg/L and 0.58 mg/L, respectively. Furthermore, the FHA and FBCP demonstrated superior bone-like apatite formation; they are non-toxic and exhibit better osteoconductive activity than the CHA. In light of our findings, bioceramics originating from tilapia bone appear to be promising in biomedical applications such as fabricating tissue engineering scaffolds.

Strain-Induced Self-Rolling of Electrochemically Deposited Co(OH)2 Films into Organic–Inorganic Microscrolls

Strain-induced self-folding is a ubiquitous phenomenon in biology, but is rarely seen in brittle geological or synthetic inorganic materials. We here apply this concept for the preparation of three-dimensional free-standing microscrolls of cobalt hydroxide. Electrodeposition in the presence of structure-directing water-soluble polyelectrolytes interfering with solid precipitation is used to generate thin polymer/inorganic hybrid films, which undergo self-rolling upon drying. Mechanistically, we propose that heterogeneities with respect to the nanostructural motifs along the surface normal direction lead to substantial internal strain. A non-uniform response to the release of water then results in a bending motion of the two-dimensional Co(OH)2 layer accompanied by dewetting from the substrate. Pseudomorphic conversion into Co3O4 affords the possibility to generate hierarchically structured solids with inherent catalytic activity. Hence, we present an electrochemically controllable precipitation system, in which the biological concepts of organic matrix-directed mineralization and strain-induced self-rolling are combined and translated into a functional material.

Sglavo V. Nano-Hydroxyapatite Derived from Biogenic and Bioinspired Calcium Carbonates: Synthesis and In Vitro Bioactivity

Biogenic calcium carbonates naturally contain ions that can be beneficial for bone regeneration and therefore are attractive resources for the production of bioactive calcium phosphates. In the present work, cuttlefish bones, mussel shells, chicken eggshells and bioinspired amorphous calcium carbonate were used to synthesize hydroxyapatite nano-powders which were consolidated into cylindrical pellets by uniaxial pressing and sintering 800-1100 °C. Mineralogical, structural and chemical composition were studied by SEM, XRD, inductively coupled plasma/optical emission spectroscopy (ICP/OES). The results show that the phase composition of the sintered materials depends on the Ca/P molar ratio and on the specific CaCO3 source, very likely associated with the presence of some doping elements like Mg2+ in eggshell and Sr2+ in cuttlebone. Different CaCO3 sources also resulted in variable densification and sintering temperature. Preliminary in vitro tests were carried out (by the LDH assay) and they did not reveal any cytotoxic effects, while good cell adhesion and proliferation was observed at day 1, 3 and 5 after seeding through confocal microscopy. Among the different tested materials, those derived from eggshells and sintered at 900 °C promoted the best cell adhesion pattern, while those from cuttlebone and amorphous calcium carbonate showed round-shaped cells and poorer cell-to-cell interconnection.

Constructional design of echinoid endoskeleton: main structural components and their potential for biomimetic applications

The endoskeleton of echinoderms (Deuterostomia: Echinodermata) is of mesodermal origin and consists of cells, organic components, as well as an inorganic mineral matrix. The echinoderm skeleton forms a complex lattice-system, which represents a model structure for naturally inspired engineering in terms of construction, mechanical behaviour and functional design. The sea urchin (Echinodermata: Echinoidea) endoskeleton consists of three main structural components: test, dental apparatus and accessory appendages. Although, all parts of the echinoid skeleton consist of the same basic material, their microstructure displays a great potential in meeting several mechanical needs according to a direct and clear structure-function relationship. This versatility has allowed the echinoid skeleton to adapt to different activities such as structural support, defence, feeding, burrowing and cleaning. Although, constrained by energy and resource efficiency, many of the structures found in the echinoid skeleton are optimized in terms of functional performances. Therefore, these structures can be used as role models for bio-inspired solutions in various industrial sectors such as building constructions, robotics, biomedical and material engineering. The present review provides an overview of previous mechanical and biomimetic research on the echinoid endoskeleton, describing the current state of knowledge and providing a reference for future studies.

Hydroxyapatite Biosynthesis Obtained from Sea Urchin Spines (Strongylocentrotus purpuratus): Effect of Synthesis Temperature

In this investigation, hydroxyapatite (HA) was synthesized using sea urchin spines (Strongylocentrotus purpuratus) via a precipitation and heat treatment method at three different temperatures (500, 600 and 700 °C). Biosynthesized HA was characterized to determine the vibration of functional groups, morphology, particle size, crystalline structure and chemical composition. For this, Fourier-Transform Infrared Spectroscopy with Attenuated Total Reflectance (FTIR-ATR), Scanning Electron Microscopy (SEM) coupled with Energy Dispersive X-ray Spectroscopy (EDS), X-ray Diffraction (XRD) and X-ray Photoelectron Spectroscopy (XPS) were used, respectively. The FTIR-ATR results reveal that the most defined characteristic HA bonds (O-H, P-O and C-O bonds) were better defined at higher synthesis temperatures. SEM also presented evidence that temperature has a significant effect on morphology. EDS results showed that the Ca/P ratio increased in the samples at higher temperatures. XRD analysis presented the characteristic peaks of HA, showing a lower crystallinity when the synthesis temperature increased. Finally, the XPS confirmed that the material resulting from biosynthesis was HA. Hence, according to these results, the synthesis temperature of HA has a significant effect on the characteristics of the resulting material.

Strength, elasticity and the limits of energy dissipation in two related sea urchin spines with biomimetic potential

The calcitic spines of the sea urchins Heterocentrotus mamillatus and H. trigonarius are promising role models for lightweight applications, bone tissue scaffolds and energy dissipating processes due to their highly porous and organized structure. Therefore, mechanical properties including Young's Modulus, strength, failure behaviour and energy dissipation efficiency have been investigated in depth with uniaxial compression experiments, 3-point bending tests and resonance frequency damping analysis. It was found that despite a very similar structure, H. trigonarius has a significantly lower porosity than H. mamillatus leading to a higher strength and Young's Moduli, but limited ability to dissipate energy. In order to show reliable energy dissipation during failure in uniaxial compression, a transition porosity of 0.55-0.6 needs to be exceeded. The most effective structure for this purpose is a homogeneous, foam-like structure confined by a thin and dense shell that increases initial strength and was found in numerous spines of H. mamillatus. Sharp porosity changes induced by dense growth layers or prominent wedges of the spines' radiating building principle act as structural weaknesses, along which large flakes can be spalled, reducing the energy dissipation efficiency considerably. The high strength and Young's Modulus at the biologically necessary high porosity levels of the spines is useful for Heterocentrotus and their construction therefore remains to be a good example of biomimetics. However, the energy dissipative failure behaviour may be regarded as a mere side effect of the structure.

Development of Phosphatized Calcium Carbonate Biominerals as Bioactive Bone Graft Substitute Materials, Part I: Incorporation of Magnesium and Strontium Ions

Synthetic materials based on calcium phosphate (CaP) are frequently used as bone graft substitutes when natural bone grafts are not available or not suitable. Chemical similarity to bone guarantees the biocompatibility of synthetic CaP materials, whereas macroporosity enables their integration into the natural bone tissue. To restore optimum mechanical performance after the grafting procedure, gradual resorption of CaP implants and simultaneous replacement by natural bone is desirable. Mg and Sr ions released from implants support osteointegration by stimulating bone formation. Furthermore, Sr ions counteract osteoporotic bone loss and reduce the probability of related fractures. The present study aimed at developing porous Ca carbonate biominerals into novel CaP-based, bioactive bone implant materials. Macroporous Ca carbonate biominerals, specifically skeletons of corals (aragonite) and sea urchins (Mg-substituted calcite), were hydrothermally converted into pseudomorphic CaP materials with their natural porosity preserved. Sr ions were introduced to the mineral replacement reactions by temporarily stabilizing them in the hydrothermal phosphate solutions as Sr-EDTA complexes. In this reaction system, Na, Mg, and Sr ions favored the formation of correspondingly substituted β-tricalcium phosphate over hydroxyapatite. Upon dissolution, the incorporated functional ions became released, endowing these CaP materials with bioactive and potentially osteoporotic properties.

Development of Phosphatized Calcium Carbonate Biominerals as Bioactive Bone Graft Substitute Materials, Part II: Functionalization with Antibacterial Silver Ions

Porous calcium phosphate (CaP) materials as bone graft substitutes can be prepared from Ca carbonate biomineral structures by hydrothermal conversion into pseudomorphic CaP scaffolds. The present study aims at furnishing such phosphatized Ca carbonate biomineral (PCCB) materials with antibacterial Ag ions in order to avoid perisurgical wound infections. Prior to this study, PCCB materials with Mg and/or Sr ions incorporated for stimulating bone formation were prepared from coral skeletons and sea urchin spines as starting materials. The porous PCCB materials were treated with aqueous solutions of Ag nitrate with concentrations of 10 or 100 mmol/L, resulting in the formation of Ag phosphate nanoparticles on the sample surfaces through a replacement reaction. The materials were characterized using scanning electron microscopy (SEM) energy-dispersive X-ray spectroscopy (EDS) and X-ray diffractometry (XRD). In contact with Ringer`s solution, the Ag phosphate nanoparticles dissolved and released Ag ions with concentrations up to 0.51 mg/L, as shown by atomic absorption spectroscopy (AAS) analyses. In tests against Pseudomonas aeruginosa and Staphylococcus aureus on agar plates, antibacterial properties were similar for both types of Ag-modified PCCB materials. Concerning the antibacterial performance, the treatment with AgNO₃ solutions with 10 mmol/L was almost as effective as with 100 mmol/L.

Synthetic and Marine-Derived Porous Scaffolds for Bone Tissue Engineering

Bone is a vascularized and connective tissue. The cortical bone is the main part responsible for the support and protection of the remaining systems and organs of the body. The trabecular spongy bone serves as the storage of ions and bone marrow. As a dynamic tissue, bone is in a constant remodelling process to adapt to the mechanical demands and to repair small lesions that may occur. Nevertheless, due to the increased incidence of bone disorders, the need for bone grafts has been growing over the past decades and the development of an ideal bone graft with optimal properties remains a clinical challenge. This review addresses the bone properties (morphology, composition, and their repair and regeneration capacity) and puts the focus on the potential strategies for developing bone repair and regeneration materials. It describes the requirements for designing a suitable scaffold material, types of materials (polymers, ceramics, and composites), and techniques to obtain the porous structures (additive manufacturing techniques like robocasting or derived from marine skeletons) for bone tissue engineering applications. Overall, the main objective of this review is to gather the knowledge on the materials and methods used for the production of scaffolds for bone tissue engineering and to highlight the potential of natural porous structures such as marine skeletons as promising alternative bone graft substitute materials without any further mineralogical changes, or after partial or total transformation into calcium phosphate.

Strength-size relationships in two porous biological materials

According to the Weibull theory for brittle materials, the mean experimental strength decreases with test specimen size. For the brittle parts of an organism this would mean that becoming larger in size results automatically in reducing strength. This unfavorable relationship was investigated for two porous, biological materials that are promising concept generators for crack deflective and energy dissipative applications in compressive overloading: the quasi-brittle coconut endocarp and the brittle spines of the sea urchin Heterocentrotus mamillatus. Segments in different volumes were prepared and tested in uniaxial compression experiments. Failure of both materials is Weibull distributed underlining that it is caused by statistically distributed flaws in the structure. However, the coconut endocarp has a much higher Weibull modulus (m = 14.1-16.5) than the spines (m = 5). The more predictable failure of the endocarp is probably attributed to a rather homogeneous microstructural design and water bound in the structure. In terms of the spines it was found that the Weibull modulus is structure dependent: More homogeneous spines feature a higher Weibull modulus than spines with a heterogeneous structure. Whereas the nearly dense endocarp exhibited, although less pronounced, the expected decrease in strength with increase in size, the spines showed a failure independently of size. This remarkable behavior may be explained with their highly porous internal structure. Small and large spines consist of struts of similar size, which constitute the porous internal structure, potentially limiting the flaw size to the size of the strut regardless of the spine size.

STATEMENT OF SIGNIFICANCE

Scaling is an important aspect of the biomimetic work process, since biological role models and structures have rarely the same size as their technical implementations. The algorithms of Weibull are a standard tool in material sciences to describe scaling effects in materials whose critical strength depends on statistically distributed flaws. The challenge is to apply this theory (developed for homogeneous, isotropic technical materials) to brittle and quasi-brittle biological materials with hierarchical structuring. This study is a first approach to verify whether the Weibull theory can be applied to the coconut endocarp and to sea urchin spines in order to model their size/volume/property-relations.

Natural calcium phosphates from fish bones and their potential biomedical applications

The treatment and recovery of bio-wastes have raised considerable attention both from the environmental and economic point of view. Every year, a remarkable amount of fish processing by-products are generated and dumped as waste from all over the world. Fish bones can serve as a raw material for the production of high value-added compounds that can be used in various sectors including agrochemical, biomedical, food and pharmaceutical industries. The calcination of fish bones results in a single phase (hydroxyapatite) or bi-phasic (hydroxyapatite-tricalcium phosphate) bioceramics depending on the processing conditions as well as the content of the fish bones. This review summarizes the literature on the production of hydroxyapatite from fish bones and discusses their potential applications in biomedical field. The effect of processing conditions on the properties of final products including Ca/P ratio, crystal structure, particle shape, particle size and biological properties are presented in the light of X-ray diffraction, scanning electron microscopy, transmission electron microscopy, thermogravimetric-differential thermal analysis, bioactivity and biocompatibility investigations.

Preparation of flexible bone tissue scaffold utilizing sea urchin test and collagen

Gonads of sea urchin are consumed in Japan and some countries as food and most parts including its tests are discarded as marine wastes. Therefore, utilization of them as functional materials would reduce the waste as well as encourage Japanese fishery. In this study, magnesium containing calcite granules collected from sea urchin tests were hydrothermally phosphatized and the obtained granules were identified as approximately 82% in mass of magnesium containing β-tricalcium phosphate and 18% in mass of nonstoichiometric hydroxyapatite, i.e., a biphasic calcium phosphate, maintaining the original porous network. Shape-controlled scaffolds were fabricated with the obtained biphasic calcium phosphate granules and collagen. The scaffolds showed good open porosity (83.84%) and adequate mechanical properties for handling during cell culture and subsequent operations. The MG-63 cells showed higher proliferation and osteogenic differentiation in comparison to a control material, the collagen sponge with the same size. Furthermore, cell viability assay proved that the scaffolds were not cytotoxic. These results suggest that scaffold prepared using sea urchin test derived calcium phosphate and collagen could be a potential candidate of bone void fillers for non-load bearing defects in bone reconstruction as well as scaffolds for bone tissue engineering.

Lightweight Open-Cell Scaffolds from Sea Urchin Spines with Superior Material Properties for Bone Defect Repair

Sea urchin spines (Heterocentrotus mammillatus), with a hierarchical open-cell structure similar to that of human trabecular bone and superior mechanical property (compressive strength ∼43.4 MPa) suitable for machining to shape, were explored for potential applications of bone defect repair. Finite element analyses reveal that the compressive stress concentrates along the dense growth rings and dissipates through strut structures of the stereoms, indicating that the exquisite mesostructures play an important role in high strength-to-weight ratios. The fracture strength of magnesium-substituted tricalcium phosphate (β-TCMP) scaffolds produced by hydrothermal conversion of urchin spines is about 9.3 MPa, comparable to that of human trabecular bone. New bone forms along outer surfaces of β-TCMP scaffolds after implantation in rabbit femoral defects for one month and grows into the majority of the inner open-cell spaces postoperation in three months, showing tight interface between the scaffold and regenerative bone tissue. Fusion of beagle lumbar facet joints using a Ti-6Al-4V cage and β-TCMP scaffold can be completed within seven months with obvious biodegradation of the β-TCMP scaffold, which is nearly completely degraded and replaced by newly formed bone ten months after implantation. Thus, sea urchin spines suitable for machining to shape have advantages for production of biodegradable artificial grafts for bone defect repair.

Osteogenic cell response to 3-D hydroxyapatite scaffolds developed via replication of natural marine sponges

Bone tissue engineering may provide an alternative to autograft, however scaffold optimisation is required to maximize bone ingrowth. In designing scaffolds, pore architecture is important and there is evidence that cells prefer a degree of non-uniformity. The aim of this study was to compare scaffolds derived from a natural porous marine sponge (Spongia agaricina) with unique architecture to those derived from a synthetic polyurethane foam. Hydroxyapatite scaffolds of 1 cm(3) were prepared via ceramic infiltration of a marine sponge and a polyurethane (PU) foam. Human foetal osteoblasts (hFOB) were seeded at 1 × 10(5) cells/scaffold for up to 14 days. Cytotoxicity, cell number, morphology and differentiation were investigated. PU-derived scaffolds had 84-91% porosity and 99.99% pore interconnectivity. In comparison marine sponge-derived scaffolds had 56-61% porosity and 99.9% pore interconnectivity. hFOB studies showed that a greater number of cells were found on marine sponge-derived scaffolds at than on the PU scaffold but there was no significant difference in cell differentiation. X-ray diffraction and inductively coupled plasma mass spectrometry showed that Si ions were released from the marine-derived scaffold. In summary, three dimensional porous constructs have been manufactured that support cell attachment, proliferation and differentiation but significantly more cells were seen on marine-derived scaffolds. This could be due both to the chemistry and pore architecture of the scaffolds with an additional biological stimulus from presence of Si ions. Further in vivo tests in orthotopic models are required but this marine-derived scaffold shows promise for applications in bone tissue engineering.

A Review of Synthesis Methods, Properties and Use of Hydroxyapatite as a Substitute of Bone

In recent years, a significant achievement has been made in developing biomaterials, in particular the design of bioceramics, from natural sources for various biomedical applications. In this review, we discuss the fundamentals of structure, function and characteristics of human bone, its calcium and phosphate composition, role and importance of bioceramics for bone repairing or regeneration. This review also outlines various isolation techniques and the application of novel marine-derived hydroxyapatite (HA) and tri-calcium phosphate (TCP) for biocomposites engineering, and their potentials for bone substitute and bone regeneration.

Evolving marine biomimetics for regenerative dentistry

New products that help make human tissue and organ regeneration more effective are in high demand and include materials, structures and substrates that drive cell-to-tissue transformations, orchestrate anatomical assembly and tissue integration with biology. Marine organisms are exemplary bioresources that have extensive possibilities in supporting and facilitating development of human tissue substitutes. Such organisms represent a deep and diverse reserve of materials, substrates and structures that can facilitate tissue reconstruction within lab-based cultures. The reason is that they possess sophisticated structures, architectures and biomaterial designs that are still difficult to replicate using synthetic processes, so far. These products offer tantalizing pre-made options that are versatile, adaptable and have many functions for current tissue engineers seeking fresh solutions to the deficiencies in existing dental biomaterials, which lack the intrinsic elements of biofunctioning, structural and mechanical design to regenerate anatomically correct dental tissues both in the culture dish and in vivo.

MC3T3-E1 proliferation and differentiation on biphasic mixtures of Mg substituted β-tricalcium phosphate and amorphous calcium phosphate

A low temperature aqueous approach was used to synthesize nanocrystalline, high surface area Mg(2+) substituted β-tricalcium phosphate (β-TCMP) to assess its potential use as a synthetic bone graft substitute. X-ray diffraction indicated that β-TCMP was the predominant crystalline phase formed. However, thermal analysis revealed the presence of a secondary amorphous phase which increased with increasing Mg(2+) concentration. Further analysis by Rietveld refinement indicated that the level of ionic substitution of Ca(2+) by Mg(2+) was significantly lower than the amount of Mg(2+) measured using elemental analysis, confirming the formation of a Mg(2+) rich secondary amorphous phase. MC3T3-E1 proliferation on substrates prepared using β-TCMP was assessed using the MTT assay. In comparison to commercially available β-TCP, increased proliferation was observed on samples prepared with 50% Mg, despite elevated Mg(2+) and PO4(3-) concentrations in culture media. Alkaline phosphatase (ALP) activity and qRT-PCR were used to study the effect of varying Mg(2+) substitution on osteogenic differentiation. Cells cultured on β-TCMP substrates prepared with increased Mg(2+) concentrations expressed significantly increased levels of ALP activity and osteogenic genes such as, osteocalcin, collagen-1, and Runx2, in comparison to those cultured on commercially available β-TCP.

Osteogenic activity of silver-loaded coral hydroxyapatite and its investigation in vivo

In this study, the scaffolds based on mineralized silver-loaded coral hydroxyapatites (SLCHAs) were developed for bone regeneration in the radius of rabbit with a 15-mm infective segmental defect model for the first time. The SLCHAs were achieved by surface adsorption and ion-exchange reaction between Ca(2+) of coral hydroxyapatite (CHA) and Ag(+) of silver nitrate with different concentration at room temperature. Release experiment in vitro, X-ray diffraction and scanning electron microscopy equipped with energy-dispersive X-ray spectrometer were applied to exhibit that the scaffold showed some features of natural bone both in main component and hierarchical microstructure. The three-dimensional porous scaffold materials imitate the microstructure of cancellous bone. Mouse embryonic pre-osteoblast cells (MC3T3-E1) were used to investigate the cytocompatibility of SLCHAs, CHA and pure coral. Cell activity were studied with alkaline phosphataseenzyme assay after 2, 4, 6 days of incubation. It was no statistically significant differences in cell activity on the scaffolds of Ag(+)(13.6 μg/mL)/CHA, Ag(+)(1.7 μg/mL)/CHA, CHA and pure coral. The results indicated that the lower silver concentration has little effect on cell activity. In the implantation test, the infective segmental defect repaired with SLCHAs was healed up after 10 weeks after surgery, and the implanted composites were almost substituted by new bone tissue, which were very comparable with the scaffold based on mineralized CHA. It could be concluded that the SLCHAs contained with appropriate silver ionic content could act as biocidal agents and maintain the advantages of mineralized CHA or coral, while avoiding potential bacteria-dangers and toxical heavy-metal reaction. All the above results showed that the SLCHAs with anti-infective would be as a promising scaffold material, which whould be widely applied into the clinical for bone regeneration.

CHARACTERIZATION OF NANO-HYDROXYAPATITE SYNTHESIZED FROM SEA SHELLS THROUGH WET CHEMICAL METHOD

Nano-hydroxyapatite (HA) was synthesized by a wet chemical reaction using powdered sea shells ( CaO ) as starting material which was converted to calcium hydroxide ( Ca(OH) 2) and subsequently reacted with phosphoric acid (H3PO4) . Initially raw sea shells ( CaCO3 ) were thermally converted to amorphous calcium oxide by heat treatment. Two sets of experiments were done; in the first experiment, HA powder was dried in an electric furnace and in the second experiment, the reactants were irradiated in a domestic microwave oven followed by microwave drying. In each set of experiments, the concentrations of the reactants were decreased gradually. HA was synthesized by slow addition of phosphoric acid (H3PO4) in to calcium hydroxide ( Ca(OH) 2) maintaining the pH of the solution at 10 to avoid the formation of calcium deficient apatites. In both the experiments, Ca:P ratio of 1.67 was maintained for the reagents. The synthesized samples showed X-ray diffraction (XRD) patterns corresponding to hydroxyapatite. The wet chemical process with furnace drying resulted in HA particles of size 7–34 nm, whereas microwave irradiated process yielded HA particles of size 34–102 nm as evidenced from XRD analyses. The above experimental work done by wet chemical synthesis to produce HA powder from sea shells is a simple processing method at room temperature. Microwave irradiation leads to uniform crystallite sizes as evident from this study, at differing concentrations of the reactants and is a comparatively easy method to synthesize HA. The high resolution scanning electron microscopy (HRSEM)/transmission electron microscopic (TEM) analyses revealed the characteristic rod-shaped nanoparticles of HA for the present study.

A New Natural Biomaterial: Sheep Dentine Derived Hydroxyapatite

Hydroxyapatite (HA) is a particularly attractive material for bone and tooth implants since it does not only closely resemble human tooth and bone mineral but it has also biologically proven to be compatible with these tissues. The applications of pure HA are restricted to non load bearing implants due to the poor mechanical properties of HA. Biomaterials of synthetic HA are highly reliable but the synthesis of HA is often complicate and expensive. Bioceramics of naturally derived biological apatites are more economic. Aim of the present work is to introduce sheep teeth dentine HA material as an alternative source of bioactive biomaterials for grafting purposes. The work was started with such a way that extracted sheep teeth were cleaned. The teeth were calcinated at 850°C in air. It was seen that enamel matter was easily separated from dentine after calcination. The collected dentine parts were crushed and ball milled. The powder was pressed between hardened steel dies to produce samples suitable for compression and microhardness tests. The obtained powder compacts were sintered at different temperatures, specifically 1000, 1100, 1200, and 1300°C in air. Results of microhardness and compression strength (along with the statistical analysis of these results) as well as those of SEM and XRD analyses are presented. In the literature, there is very little information about the mechanical properties of dentine and enamel matter derived from sheep, bovine and human. The highest compression strength value in the present study was measured around 146 MPa (from human dentine derived HA the highest value was almost 60 MPa after sintering at 1300°C). The best microhardness in the present study was found as nearly 125 HV. The results of this study showed that the HA material produced from sheep tooth dentine can be qualified as a promising source of HA needed to produce bioactive ceramics.

Simple method for preparation of nanostructurally organized spines of sand dollar Scaphechinus mirabilis (Agassiz, 1863)

Unique skeletal formations of marine invertebrates, including representatives of Echinodermata, have the unique potential to serve as templates for bio-inspired materials chemistry, biomimetics, and materials science. The sand dollar Scaphechinus mirabilis (Agassiz, 1983) is widely distributed in the northwest of the Pacific Ocean from southern Japan to the Aleutian Islands. This animal is the main source of naphtochinone-based substances. These compounds have recently drawn medical attention for their use as cardiological and ophthalmological drugs. Unfortunately, after extraction of the naphtochinones, the residual skeletons and spines of the sand dollars were usually discarded. Here, we report the first method for the preparation of nanostructurally organized spines of S. mirabilis, using a simple enzymatic and hydrogen peroxide-based treatment. Application of this method opens the way for development of non-wasteful environmentally clean technology of sand dollars as well-known industrial marine invertebrates.

Mg2+ substituted calcium phosphate nano particles synthesis for non viral gene delivery application

Gene therapy provides a unique approach to medicine as it can be adapted towards the treatment of both inherited and acquired diseases. Recently, calcium phosphate vectors as a new generation of the non viral gene delivery nano carriers have been studied because of their biocompatibility and DNA condensation and gene transfer ability. Substituting cations, like magnesium, affects physical and chemical properties of calcium phosphate nano particles. In this study, Mg(2+) substituted calcium phosphate nano particles have been prepared using the simple sol gel method. X-ray diffraction analysis, Fourier transform infra red spectroscopy, transmission electron microscopy, specific surface area analysis, zeta potential measurement and ion release evaluation were used for characterization of the samples. It was concluded that presence of Mg ions decrease particle size and crystallinity of the samples and increase positive surface charge as well as beta tricalcium phosphate fraction in chemical composition of calcium phosphate. These properties result in increasing the DNA condensation ability, specific surface area and dissolution rate of the samples which make them suitable particles for gene delivery application.

Preparation, characterization and mechanical performance of dense beta-TCP ceramics with/without magnesium substitution

Beta-tricalcium phosphate (beta-TCP) powder was prepared by a two-step process: wet precipitation of apatitic tricalcium phosphate [Ca(9)(HPO(4))(PO(4))(5)(OH)] (beta-TCP 'precursor') and calcination of the precursor at 800 degrees C for 3 h to produce beta-TCP. Magnesium-substituted tricalcium phosphate (beta-TCMP) was produced by adding Mg(NO(3))(2) . 6H(2)O into Ca(NO(3))(2) solution as Mg(2+) source before the precipitation step. The transition temperature from beta-TCP to alpha-TCP increases with the increase of Mg(2+) content in beta-TCMP. beta-TCMP with 3 mol.% Mg(2+) has beta-TCP to alpha-TCP transition temperature above 1,300 degrees C. Dense beta-TCMP (3 mol.% Mg(2+)) ceramics ( approximately 99.4% relative density) were produced by pressing the green bodies at 100 MPa and further sintering at 1,250 degrees C for 2 h. The average compressive strength of dense beta-TCP ceramics sintered at 1,100 degrees C is approximately 540 MPa, while that of beta-TCMP (3 mol.% Mg(2+)) ceramics is approximately 430 MPa.