Cartilaginous constructs using primary chondrocytes from continuous expansion culture seeded in dense collagen gels

Role of Physico-Chemical and Cellular Conditions on the Bone Repair Potential of Plastically Compressed Collagen Hydrogels

Since their first description nearly 20 years ago, dense collagen hydrogels obtained by plastic compression have become popular scaffolds in tissue engineering. In particular, when seeded with dental pulp stem cells, they have demonstrated a great in vivo potential in cranial bone repair. Here, we investigated how physico-chemical and cell-seeding conditions could influence the formation and in vitro mineralization of these cellularized scaffolds. A qualitative assessment demonstrated that the gel stability before and after compression was highly sensitive to the conditions of fibrillogenesis, especially initial acid acetic and buffer concentrations. Gels with similar rheological properties but different fibrillar structures that exhibited different stabilities when used for the 3D culture of Stem cells from Human Exfoliated Deciduous teeth (SHEDs) could be prepared. Finally, in our optimal physico-chemical conditions, mineralization could be achieved only using human dental pulp stem cells (hDPSCs) at a high cell density. These results highlight the key role of fibrillogenic conditions and cell type/density on the bone repair potential of cell-laden plastically compressed collagen hydrogels.

Scaffold-Free Tracheal Engineering via a Modular Strategy Based on Cartilage and Epithelium Sheets

Tracheal defects lead to devastating problems, and practical clinical substitutes that have complex functional structures and can avoid adverse influences from exogenous bioscaffolds are lacking. Herein, a modular strategy for scaffold-free tracheal engineering is developed. A cartilage sheet (Cart-S) prepared by high-density culture is laminated and reshaped to construct a cartilage tube as the main load-bearing structure in which the chondrocytes exhibit a stable phenotype and secreted considerable cartilage-specific matrix, presenting a native-like grid arrangement. To further build a tracheal epithelial barrier, a temperature-sensitive technique is used to construct the monolayer epithelium sheet (Epi-S), in which the airway epithelial cells present integrated tight junctions, good transepithelial electrical resistance, and favorable ciliary differentiation capability. Epi-S can be integrally transferred to inner wall of cartilage tube, forming a scaffold-free complex tracheal substitute (SC-trachea). Interestingly, when Epi-S is attached to the cartilage surface, epithelium-specific gene expression is significantly enhanced. SC-trachea establishes abundant blood supply via heterotopic vascularization and then is pedicle transplanted for tracheal reconstruction, achieving 83.3% survival outcomes in rabbit models. Notably, the scaffold-free engineered trachea simultaneously satisfies sufficient mechanical properties and barrier function due to its matrix-rich cartilage structure and well-differentiated ciliated epithelium, demonstrating great clinical potential for long-segmental tracheal reconstruction.

Dedifferentiation alters chondrocyte nuclear mechanics during in vitro culture and expansion

The biophysical features of a cell can provide global insights into diverse molecular changes, especially in processes like the dedifferentiation of chondrocytes. Key biophysical markers of chondrocyte dedifferentiation include flattened cellular morphology and increased stress-fiber formation. During cartilage regeneration procedures, dedifferentiation of chondrocytes during in vitro expansion presents a critical limitation to the successful repair of cartilage tissue. Our study investigates how biophysical changes of chondrocytes during dedifferentiation influence the nuclear mechanics and gene expression of structural proteins located at the nuclear envelope. Through an experimental model of cell stretching and a detailed spatial intranuclear strain quantification, we identified that strain is amplified and the distribution of strain within the chromatin is altered under tensile loading in the dedifferentiated state. Further, using a confocal microscopy image-based finite element model and simulation of cell stretching, we found that the cell shape is the primary determinant of the strain amplification inside the chondrocyte nucleus in the dedifferentiated state. Additionally, we found that nuclear envelope proteins have lower gene expression in the dedifferentiated state. This study highlights the role of cell shape in nuclear mechanics and lays the groundwork to design biophysical strategies for the maintenance and enhancement of the chondrocyte phenotype during cell expansion with a goal of successful cartilage tissue engineering.

Improving In Vitro Cartilage Generation by Co-Culturing Adipose-Derived Stem Cells and Chondrocytes on an Allograft Adipose Matrix Framework

BACKGROUND

Microtia is an inherited condition that results in varying degrees of external ear deformities; the most extreme form is anotia. Effective surgical reconstruction techniques have been developed. However, these usually require multistage procedures and have other inherent disadvantages. Tissue engineering technologies offer new approaches in the field of external ear reconstruction. In this setting, chondrocytes are cultured in the laboratory with the aim of creating bioengineered cartilage matrices. However, cartilage engineering has many challenges, including difficulty in culturing sufficient chondrocytes. To overcome these hurdles, the authors propose a novel model of cartilage engineering that involves co-culturing chondrocytes and adipose-derived stem cells on an allograft adipose-derived extracellular matrix scaffold.

METHODS

Auricular chondrocytes from porcine ear were characterized. Adipose-derived stem cells were isolated and expanded from human lipoaspirate. Then, the auricular chondrocytes were cultured on the allograft adipose matrix either alone or with the adipose-derived stem cells at different ratios and examined histologically.

RESULTS

Cartilage induction was most prominent when the cells were co-cultured on the allograft adipose matrix at a ratio of 1:9 (auricular chondrocyte-to-adipose-derived stem cell ratio). Furthermore, because of the xenogeneic nature of the experiment, the authors were able to determine that the adipose-derived stem cells contributed to chondrogenesis by means of a paracrine stimulation of the chondrocytes.

CONCLUSIONS

In this situation, adipose-derived stem cells provide sufficient support to induce the formation of cartilage when the number of auricular chondrocytes available is limited. This novel model of cartilage engineering provides a setting for using the patient's own chondrocytes and adipose tissue to create a customized ear framework that could be further used for surgical reconstruction.

Mechanical properties and structure-function relationships of human chondrocyte-seeded cartilage constructs after in vitro culture

Autologous Chondrocyte Implantation (ACI) is a widely recognized method for the repair of focal cartilage defects. Despite the accepted use, problems with this technique still exist, including graft hypertrophy, damage to surrounding tissue by sutures, uneven cell distribution, and delamination. Modified ACI techniques overcome these challenges by seeding autologous chondrocytes onto a 3D scaffold and securing the graft into the defect. Many studies on these tissue engineered grafts have identified the compressive properties, but few have examined frictional and shear properties as suggested by FDA guidance. This study is the first to perform three mechanical tests (compressive, frictional, and shear) on human tissue engineered cartilage. The objective was to understand the complex mechanical behavior, function, and changes that occur with time in these constructs grown in vitro using compression, friction, and shear tests. Safranin-O histology and a DMMB assay both revealed increased sulfated glycosaminoglycan (sGAG) content in the scaffolds with increased maturity. Similarly, immunohistochemistry revealed increased lubricin localization on the construct surface. Confined compression and friction tests both revealed improved properties with increased construct maturity. Compressive properties correlated with the sGAG content, while improved friction coefficients were attributed to increased lubricin localization on the construct surfaces. In contrast, shear properties did not improve with increased culture time. This study suggests the various mechanical and biological properties of tissue engineered cartilage improve at different rates, indicating thorough mechanical evaluation of tissue engineered cartilage is critical to understanding the performance of repaired cartilage. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:2298-2306, 2017.

The Addition of Platelet-Rich Plasma to Scaffolds Used for Cartilage Repair: A Review of Human and Animal Studies

PURPOSE

To review the available literature on studies focusing on platelet-rich plasma (PRP)-enhanced scaffolds for cartilage lesion repair in animals and to analyze the clinical outcomes of similar biologically augmented cartilage regeneration techniques in humans.

METHODS

We conducted a literature search and subsequent review investigating the potential of PRP to enhance articular cartilage repair using scaffolds or bioengineered implants.

RESULTS

Of the 14 animal model studies reviewed, 10 reported positive effects with PRP whereas only 2 showed negative overall effects. The remaining 2 studies reported no significant differences, or neutral results, with the use of PRP. With the addition of PRP, the gross appearance and histologic analysis of repair cartilage were improved or no difference was seen compared with control (11 of 12 studies that looked at this). Human studies of the knee or talar dome showed improvements in clinical assessment scores as soon as 6 months after surgery. There was great variability in the method of PRP preparation, choice of scaffold, and cell source between studies.

CONCLUSIONS

PRP-augmented scaffolds have been shown to be beneficial in the articular cartilage repair process in animals and humans based on macroscopic, histologic, and biochemical analysis and based on clinical outcome scores, respectively. Comparison between studies is difficult because there is great variability in PRP preparation and administration.

LEVEL OF EVIDENCE

Level IV, systematic review of Level III and IV studies.

3D-Printed ABS and PLA Scaffolds for Cartilage and Nucleus Pulposus Tissue Regeneration

Painful degeneration of soft tissues accounts for high socioeconomic costs. Tissue engineering aims to provide biomimetics recapitulating native tissues. Biocompatible thermoplastics for 3D printing can generate high-resolution structures resembling tissue extracellular matrix. Large-pore 3D-printed acrylonitrile butadiene styrene (ABS) and polylactic acid (PLA) scaffolds were compared for cell ingrowth, viability, and tissue generation. Primary articular chondrocytes and nucleus pulposus (NP) cells were cultured on ABS and PLA scaffolds for three weeks. Both cell types proliferated well, showed high viability, and produced ample amounts of proteoglycan and collagen type II on both scaffolds. NP generated more matrix than chondrocytes; however, no difference was observed between scaffold types. Mechanical testing revealed sustained scaffold stability. This study demonstrates that chondrocytes and NP cells can proliferate on both ABS and PLA scaffolds printed with a simplistic, inexpensive desktop 3D printer. Moreover, NP cells produced more proteoglycan than chondrocytes, irrespective of thermoplastic type, indicating that cells maintain individual phenotype over the three-week culture period. Future scaffold designs covering larger pore sizes and better mimicking native tissue structure combined with more flexible or resorbable materials may provide implantable constructs with the proper structure, function, and cellularity necessary for potential cartilage and disc tissue repair in vivo.

Chondrocytes behaviors within type I collagen microspheres and bulk hydrogels: an in vitro study

Cell niche, which is considered to be critical to the proliferation and differentiation of cells, is one of the most important aspects for the design and development of ideal scaffolds in tissue engineering.

Low-frequency high-magnitude mechanical strain of articular chondrocytes activates p38 MAPK and induces phenotypic changes associated with osteoarthritis and pain

Osteoarthritis (OA) is a debilitating joint disorder resulting from an incompletely understood combination of mechanical, biological, and biochemical processes. OA is often accompanied by inflammation and pain, whereby cytokines associated with chronic OA can up-regulate expression of neurotrophic factors such as nerve growth factor (NGF). Several studies suggest a role for cytokines and NGF in OA pain, however the effects of changing mechanical properties in OA tissue on chondrocyte metabolism remain unclear. Here, we used high-extension silicone rubber membranes to examine if high mechanical strain (HMS) of primary articular chondrocytes increases inflammatory gene expression and promotes neurotrophic factor release. HMS cultured chondrocytes displayed up-regulated NGF, TNFα and ADAMTS4 gene expression while decreasing TLR2 expression, as compared to static controls. HMS culture increased p38 MAPK activity compared to static controls. Conditioned medium from HMS dynamic cultures, but not static cultures, induced significant neurite sprouting in PC12 cells. The increased neurite sprouting was accompanied by consistent increases in PC12 cell death. Low-frequency high-magnitude mechanical strain of primary articular chondrocytes in vitro drives factor secretion associated with degenerative joint disease and joint pain. This study provides evidence for a direct link between cellular strain, secretory factors, neo-innervation, and pain in OA pathology.

Serum- and growth-factor-free three-dimensional culture system supports cartilage tissue formation by promoting collagen synthesis via Sox9-Col2a1 interaction

OBJECTIVE

One of the factors preventing clinical application of regenerative medicine to degenerative cartilage diseases is a suitable source of cells. Chondrocytes, the only cell type of cartilage, grown in vitro under culture conditions to expand cell numbers lose their phenotype along with the ability to generate hyaline cartilaginous tissue. In this study we determine that a serum- and growth-factor-free three-dimensional (3D) culture system restores the ability of the passaged chondrocytes to form cartilage tissue in vitro, a process that involves sox9.

METHODS

Bovine articular chondrocytes were passaged twice to allow for cell number expansion (P2) and cultured at high density on 3D collagen-type-II-coated membranes in high glucose content media supplemented with insulin and dexamethasone (SF3D). The cells were characterized after monolayer expansion and following 3D culture by flow cytometry, gene expression, and histology. The early changes in signaling transduction pathways during redifferentiation were characterized.

RESULTS

The P2 cells showed a progenitor-like antigen profile of 99% CD44(+) and 40% CD105(+) and a gene expression profile suggestive of interzone cells. P2 in SF3D expressed chondrogenic genes and accumulated extracellular matrix. Downregulating insulin receptor (IR) with HNMPA-(AM3) or the PI-3/AKT kinase pathway (activated by insulin treatment) with Wortmannin inhibited collagen synthesis. HNMPA-(AM3) reduced expression of Col2, Col11, and IR genes as well as Sox6 and -9. Co-immunoprecipitation and chromatin immunoprecipitation analyses of HNMPA-(AM3)-treated cells showed binding of the coactivators Sox6 and Med12 with Sox9 but reduced Sox9-Col2a1 binding.

CONCLUSIONS

We describe a novel culture method that allows for increase in the number of chondrocytes and promotes hyaline-like cartilage tissue formation in part by insulin-mediated Sox9-Col2a1 binding. The suitability of the tissue generated via this approach for use in joint repair needs to be examined in vivo.

Extracellular matrix production in vitro in cartilage tissue engineering

Cartilage tissue engineering is arising as a technique for the repair of cartilage lesions in clinical applications. However, fibrocartilage formation weakened the mechanical functions of the articular, which compromises the clinical outcomes. Due to the low proliferation ability, dedifferentiation property and low production of cartilage-specific extracellular matrix (ECM) of the chondrocytes, the cartilage synthesis in vitro has been one of the major limitations for obtaining high-quality engineered cartilage constructs. This review discusses cells, biomaterial scaffolds and stimulating factors that can facilitate the cartilage-specific ECM production and accumulation in the in vitro culture system. Special emphasis has been put on the factors that affect the production of ECM macromolecules such as collagen type II and proteoglycans in the review, aiming at providing new strategies to improve the quality of tissue-engineered cartilage.

High mechanical strain of primary intervertebral disc cells promotes secretion of inflammatory factors associated with disc degeneration and pain

Introduction

Excessive mechanical loading of intervertebral discs (IVDs) is thought to alter matrix properties and influence disc cell metabolism, contributing to degenerative disc disease and development of discogenic pain. However, little is known about how mechanical strain induces these changes. This study investigated the cellular and molecular changes as well as which inflammatory receptors and cytokines were upregulated in human intervertebral disc cells exposed to high mechanical strain (HMS) at low frequency. The impact of these metabolic changes on neuronal differentiation was also explored to determine a role in the development of disc degeneration and discogenic pain.

Methods

Isolated human annulus fibrosus (AF) and nucleus pulposus (NP) cells were exposed to HMS (20% cyclical stretch at 0.001 Hz) on high-extension silicone rubber dishes coupled to a mechanical stretching apparatus and compared to static control cultures. Gene expression of Toll-like receptors (TLRs), neuronal growth factor (NGF) and tumour necrosis factor α (TNFα) was assessed. Collected conditioned media were analysed for cytokine content and applied to rat pheocromocytoma PC12 cells for neuronal differentiation assessment.

Results

HMS caused upregulation of TLR2, TLR4, NGF and TNFα gene expression in IVD cells. Medium from HMS cultures contained elevated levels of growth-related oncogene, interleukin 6 (IL-6), IL-8, IL-15, monocyte chemoattractant protein 1 (MCP-1), MCP-3, monokine induced by γ interferon, transforming growth factor β1, TNFα and NGF. Exposure of PC12 cells to HMS-conditioned media resulted in both increased neurite sprouting and cell death.

Conclusions

HMS culture of IVD cells in vitro drives cytokine and inflammatory responses associated with degenerative disc disease and low-back pain. This study provides evidence for a direct link between cellular strain, secretory factors, neoinnervation and potential degeneration and discogenic pain in vivo.