Scavenging effect of Trolox released from brushite cements

Incorporating the Antioxidant Fullerenol into Calcium Phosphate Bone Cements Increases Cellular Osteogenesis without Compromising Physical Cement Characteristics

Herein, fullerenol (Ful), a highly water-soluble derivative of C60 fullerene with demonstrated antioxidant activity, is incorporated into calcium phosphate cements (CPCs) to enhance their osteogenic ability. CPCs with added carboxymethyl cellulose/gelatin (CMC/Gel) are doped with biocompatible Ful particles at concentrations of 0.02, 0.04, and 0.1 wt v%-1 and evaluated for Ful-mediated mechanical performance, antioxidant activity, and in vitro cellular osteogenesis. CMC/gel cements with the highest Ful concentration decrease setting times due to increased hydrogen bonding from Ful's hydroxyl groups. In vitro studies of reactive oxygen species (ROS) scavenging with CMC/gel cements demonstrate potent antioxidant activity with Ful incorporation and cement scavenging capacity is highest for 0.02 and 0.04 wt v%-1 Ful. In vitro cytotoxicity studies reveal that 0.02 and 0.04 wt v%-1 Ful cements also protect cellular viability. Finally, increase of alkaline phosphatase (ALP) activity and expression of runt-related transcription factor 2 (Runx2) in MC3T3-E1 pre-osteoblast cells treated with low-dose Ful cements demonstrate Ful-mediated osteogenic differentiation. These results strongly indicate that the osteogenic abilities of Ful-loaded cements are correlated with their antioxidant activity levels. Overall, this study demonstrates exciting potential of Fullerenol as an antioxidant and proosteogenic additive for improving the performance of calcium phosphate cements in bone reconstruction procedures.

A microfluidic-based approach to investigate the inflammatory response of macrophages to pristine and drug-loaded nanostructured hydroxyapatite

The in vitro biological characterization of biomaterials is largely based on static cell cultures. However, for highly reactive biomaterials such as calcium-deficient hydroxyapatite (CDHA), this static environment has limitations. Drastic alterations in the ionic composition of the cell culture medium can negatively affect cell behavior, which can lead to misleading results or data that is difficult to interpret. This challenge could be addressed by a microfluidics-based approach (i.e. on-chip), which offers the opportunity to provide a continuous flow of cell culture medium and a potentially more physiologically relevant microenvironment. The aim of this work was to explore microfluidic technology for its potential to characterize CDHA, particularly in the context of inflammation. Two different CDHA substrates (chemically identical, but varying in microstructure) were integrated on-chip and subsequently evaluated. We demonstrated that the on-chip environment can avoid drastic ionic alterations and increase protein sorption, which was reflected in cell studies with RAW 264.7 macrophages. The cells grown on-chip showed a high cell viability and enhanced proliferation compared to cells maintained under static conditions. Whereas no clear differences in the secretion of tumor necrosis factor alpha (TNF-α) were found, variations in cell morphology suggested a more anti-inflammatory environment on-chip. In the second part of this study, the CDHA substrates were loaded with the drug Trolox. We showed that it is possible to characterize drug release on-chip and moreover demonstrated that Trolox affects the TNF-α secretion and morphology of RAW 264.7 ​cells. Overall, these results highlight the potential of microfluidics to evaluate (bioactive) biomaterials, both in pristine form and when drug-loaded. This is of particular interest for the latter case, as it allows the biological characterization and assessment of drug release to take place under the same dynamic in vitro environment.

A practical guide for evaluating the osteoimmunomodulatory properties of biomaterials

Biomaterials offer a promising approach to repair bone defects. Whereas traditional studies predominantly focused on optimizing the osteogenic capacity of biomaterials, less focus has been on the immune response elicited by them. However, the immune and skeletal systems extensively interact, a concept which is referred to as 'osteoimmunology'. This realization has fuelled the development of biomaterials with favourable osteoimmunomodulatory (OIM) properties, aiming to modulate the immune response and to support bone regeneration, thereby affecting the success of an implant. Given the plethora of in vitro assays used to evaluate the OIM properties of biomaterials, it may be challenging to select the right methods to produce conclusive results. In this review, we aim to provide a comprehensive and practical guide for researchers interested in studying the OIM properties of biomaterials in vitro. After a concise overview of the concept of osteoimmunology, emphasis is put on the methodologies that are regularly used to evaluate the OIM properties of biomaterials. First, a description of the most commonly used cell types and cell culture media is provided. Second, typical experimental set-ups and their relevant characteristics are discussed. Third, a detailed overview of the generally used methodologies and readouts, including cell type-specific markers and time points of analysis, is given. Finally, we highlight the promise of advanced approaches, namely microarrays, bioreactors and microfluidic-based systems, and the potential that these may offer to the osteoimmunology field. STATEMENT OF SIGNIFICANCE: Osteoimmunology focuses on the connection and communication between the skeletal and immune systems. This interaction has been recognized to play an important role in the clinical success of biomaterials, which has resulted in an increasing amount of research on the osteoimmunomodulatory (OIM) properties of biomaterials. However, the amount of literature makes it challenging to extract the information needed to design experiments from beginning to end, and to compare obtained results to existing work. This article intends to serve as a guide for those aiming to learn more about the commonly used experimental approaches in the field. We cover early-stage choices, such as cell types and experimental set-ups, but also discuss specific assays, including cell markers and time points of analysis.

Improvement of the wound healing properties of hydrogels with N-acetylcysteine through their modification with methacrylate-containing polymers

Hydrogels with antioxidant activity have shown to significantly improve the standard of care, because they promote efficient wound healing, i.e. regeneration. N-Acetylcysteine (NAC) is an antioxidant amino acid derivative that promotes complete tissue restoration. However, NAC has anticoagulant properties that may also hinder blood coagulation, which is crucial for hydrogels for wound healing applications. To take advantage of the regenerative activity of NAC while avoiding hampering the hemostasis stage during wound healing, we modified gelatin-NAC with the methacrylate-containing polymers 2-hydroxyethyl methacrylate (H) and poly(ethylene glycol) methyl ether methacrylate (P) to produce Gel-HP-NAC. These hydrogels clotted more blood and faster than Gel and Gel-NAC hydrogels, while maintaining fluid absorption properties adequate to promote wound healing. Similarly, there were more viable human skin fibroblasts after 10 days cultured in Gel-HP-NAC compared with Gel and Gel-NAC. A mouse full-thickness skin wound model demonstrated that Gel-HP-NAC hydrogels improved the wound healing process as compared to the untreated group as proved by the increased wound closure rates and re-epithelialization. Histology of the biopsied tissues indicated more organized collagen deposits on the wounds treated with either Gel-HP-NAC or Gel-NAC than untreated wounds. Our results show that modification of NAC-containing hydrogels through methacrylate-containing polymers improved their wound healing properties, including blood-clotting, and demonstrate the potential of Gel-HP-NAC hydrogels for wound treatment and tissue regeneration.

Linearolactone and Kaempferol Disrupt the Actin Cytoskeleton in Entamoeba histolytica: Inhibition of Amoebic Liver Abscess Development

Linearolactone (1) and kaempferol (2) have amebicidal activity in in vitro studies. The type of cell death induced by 1 and 2 and their effects on the virulence of E. histolytica were analyzed by transmission and confocal electron microscopy, reactive oxygen species (ROS) production, and apoptosis, detected by flow cytometry with dichlorofluorescein 2',7'-diacetate and annexin-V binding, respectively, and confirmed by TUNEL. The interaction of 1 and 2 with actin was analyzed by docking, and the in vivo amoebicidal activity was established with the Mesocricetus auratus model; amebic liver abscess (ALA) development was evaluated by magnetic resonance (MR) and validated post mortem. In vitro, compounds 1 and 2 caused chromatin condensation, intracellular ROS, and loss of actin structures. Coupling analysis showed that they bind to the allosteric and catalytic sites of actin with binding energies of -11.30 and -8.45 kcal/mol, respectively. Treatments with 1 and 2 induced a decrease in ALA formation without toxic effects on the liver and kidney. Thus, compound 1, but not 2, was able to induce apoptosis-like effects in E. histolytica trophozoites by intracellular production of ROS that affected the actin cytoskeleton structuration. In vivo, compound 1 was more active than compound 2 to reduce the development of ALA.

Biocompatibility assessment of cyclic olefin copolymers: Impact of two additives on cytotoxicity, oxidative stress, inflammatory reactions, and hemocompatibility

This work reports the biocompatibility evaluation of cyclic olefin copolymers (COC) as candidates for implantable medical devices. The focus was to establish the influence of two major additives (antioxidant and lubricant) on the overall biocompatibility. The cytotoxicity was evaluated according to ISO 10993-5 guidelines using L929 fibroblasts, HUVEC, and THP-1-derived macrophages. Oxidative stress (ROS, GSH/GSSG, and SOD analysis) and pro-inflammatory cytokines (Il-6 and TNF-α secretion) were quantified using THP-1 cells in direct contact with films. Hemocompatibility was assessed through haemolysis testing, dynamic blood coagulation, platelet adhesion, and activation (membranous P-selectin expression). Results show that the different types of COC have successfully passed the in vitro biocompatibility tests. The presence of antioxidant induces however a slight decrease in ROS production in correlation with a high SOD activity and a modification in blood coagulation profile probably linked to antioxidant recrystallization phenomenon on the surface of COC. The lubricant presence reduced haemolysis, fibrinogen adhesion, and platelet activation. Surface nanotopography of COC highlights different types of needles and globules according to the present additive. Those primary results indicate that COC are promising biomaterial. However, additives influenced some biological parameters pointing out the necessity of a global approach of risk analysis for biocompatibility evaluation. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 3333-3349, 2017.

Selenium- and Tellurium-Based Antioxidants for Modulating Inflammation and Effects on Osteoblastic Activity

Increased oxidative stress plays a significant role in the etiology of bone diseases. Heightened levels of H₂O₂ disrupt bone homeostasis, leading to greater bone resorption than bone formation. Organochalcogen compounds could act as free radical trapping agents or glutathione peroxidase mimetics, reducing oxidative stress in inflammatory diseases. In this report, we synthesized and screened a library of organoselenium and organotellurium compounds for hydrogen peroxide scavenging activity, using macrophagic cell lines RAW264.7 and THP-1, as well as human mono- and poly-nuclear cells. These cells were stimulated to release H₂O₂, using phorbol 12-myristate 13-acetate, with and without organochalogens. Released H₂O₂ was then measured using a chemiluminescent assay over a period of 2 h. The screening identified an organoselenium compound which scavenged H₂O₂ more effectively than the vitamin E analog, Trolox. We also found that this organoselenium compound protected MC3T3 cells against H₂O₂-induced toxicity, whereas Trolox did not. The organoselenium compound exhibited no cytotoxicity to the cells and had no deleterious effects on cell proliferation, viability, or alkaline phosphatase activity. The rapidity of H₂O₂ scavenging and protection suggests that the mechanism of protection is due to the direct scavenging of extracellular H₂O₂. This compound is a promising modulators of inflammation and could potentially treat diseases involving high levels of oxidative stress.

Molecular level interactions in brushite-aminoacids composites

The interaction of aminoacids (Glycine, Proline, Lysine) with brushite based bone cements has been investigated by several techniques (FTIR spectroscopy, Thermogravimetry-TG, Scanning Electron Microscopy-SEM, mechanical properties studies), with the aim to elucidate the properties of the resulting composite materials and the interaction occurring at molecular level between the inorganic matrix and the organic moieties. Brushite phase is predominantly obtained also in the presence of aminoacids added during preparation of the bone cement. Focusing on Glycine incorporation, the presence of a fraction of bulk Glycine, weakly interacting with the inorganic matrix, together with Glycine specifically interacting with adsorption sites can be envisaged, as pointed out by FT IR and thermogravimetric data. In detail, FT-IR data evidenced changes in shape and position of bands associated to stretching modes of the carboxylic groups in Glycine structure, which can be explained by the coordination of these functional groups with the Ca ions in the matrix. Heating this composite at controlled temperature results in the detection of a condensation products, either cyclic condensation product, either dipeptide. Diffuse and not specific H-bonding seems to be the main form of interaction of Proline and Lysine with brushite. Due to the coordination with Ca ions here described, Glycine can act as retardant during brushite preparation, allowing good workability of the resulting composite.

Simvastatin and zinc synergistically enhance osteoblasts activity and decrease the acute response of inflammatory cells

Several ceramic biomaterials have been suggested as promising alternatives to autologous bone to replace or restore bone after trauma or disease. The osteoinductive potential of most scaffolds is often rather low by themselves and for this reason growth factors or drugs have been supplemented to these synthetic materials. Although some growth factors show good osteoinductive potential their drawback is their high cost and potential severe side effects. In this work the combination of the well-known drug simvastatin (SVA) and the inorganic element Zinc (Zn) is suggested as a potential additive to bone grafts in order to increase their bone regeneration/formation. MC3T3-E1 cells were cultured with Zn (10 and 25 µM) and SVA (0.25 and 0.4 µM) for 10 days to evaluate proliferation and differentiation, and for 22 days to evaluate secretion of calcium deposits. The combination of Zn (10 µM) and SVA (0.25 µM) significantly enhanced cell differentiation and mineralization in a synergetic manner. In addition, the release of reactive oxygen species (ROS) from primary human monocytes in contact with the same concentrations of Zn and SVA was evaluated by chemiluminescence. The combination of the additives decreased the release of ROS, although Zn and SVA separately caused opposite effects. This work shows that a new combination of additives can be used to increase the osteoinductive capacity of porous bioceramics.

Biodegradable Materials for Bone Repair and Tissue Engineering Applications

This review discusses and summarizes the recent developments and advances in the use of biodegradable materials for bone repair purposes. The choice between using degradable and non-degradable devices for orthopedic and maxillofacial applications must be carefully weighed. Traditional biodegradable devices for osteosynthesis have been successful in low or mild load bearing applications. However, continuing research and recent developments in the field of material science has resulted in development of biomaterials with improved strength and mechanical properties. For this purpose, biodegradable materials, including polymers, ceramics and magnesium alloys have attracted much attention for osteologic repair and applications. The next generation of biodegradable materials would benefit from recent knowledge gained regarding cell material interactions, with better control of interfacing between the material and the surrounding bone tissue. The next generations of biodegradable materials for bone repair and regeneration applications require better control of interfacing between the material and the surrounding bone tissue. Also, the mechanical properties and degradation/resorption profiles of these materials require further improvement to broaden their use and achieve better clinical results.