In vitro and in vivo biocompatibility and corrosion behaviour of a bioabsorbable magnesium alloy coated with octacalcium phosphate and hydroxyapatite

In vitrocellular biocompatibility andin vivodegradation behavior of calcium phosphate-coated ZK60 magnesium alloy

Calcium phosphate (Ca-P) surface coating is a simple but effective way to enhance both corrosion resistance and biocompatibility of ZK60 magnesium alloy. However, cell compatibility on different Ca-P layers coated on ZK60 alloy has seldom been investigated. In this study, the effects of type, morphology and corrosion protection of several Ca-P coatings formed at pH 6.5, 7.8 and 10.2 on cell behavior were examined by using an osteoblastic cell line MC3T3-E1. Furthermore,in vivobehavior in rabbits of the alloy coated with the optimum Ca-P layer was also studied. It was found that the surface factors governed the cell morphology and density. The coating morphology plays a dominant role in these surface factors. The sample coated at pH 7.8 showed the best cellular biocompatibility, suggesting that the hydroxyapatite (HAp) layer formed at pH 7.8 was the optimum coating. In rabbits, this optimum coating enhanced remarkably the corrosion resistance of the alloy. During implantation, the outermost crystals of the HAp coating were shortened and thinned due to the dissolution of HAp caused by the body fluid of the rabbits. It is indicated that ZK60 alloy coated at pH 7.8 can be applied as a biodegradable implant.

A comprehensive review of properties of the biocompatible thin films on biodegradable Mg alloys

Magnesium (Mg) and its alloys have attracted attention as biodegradable materials for biomedical applications owing to their mechanical properties being comparable to that of bone. Mg is a vital trace element in many enzymes and thus forms one of the essential factors for human metabolism. However, before being used in biomedical applications, the early stage or fast degradation of Mg and its alloys in the physiological environment should be controlled. The degradation of Mg alloys is a critical criterion that can be controlled by a surface modification which is an effective process for conserving their desired properties. Different coating methods have been employed to modify Mg surfaces to provide good corrosion resistance and biocompatibility. This review aims to provide information on different coatings and discuss their physical and biological properties. Finally, the current withstanding challenges have been highlighted and discussed, followed by shedding some light on future perspectives.

Comprehensive review of additively manufactured biodegradable magnesium implants for repairing bone defects from biomechanical and biodegradable perspectives

Bone defect repair is a complicated clinical problem, particularly when the defect is relatively large and the bone is unable to repair itself. Magnesium and its alloys have been introduced as versatile biomaterials to repair bone defects because of their excellent biocompatibility, osteoconductivity, bone-mimicking biomechanical features, and non-toxic and biodegradable properties. Therefore, magnesium alloys have become a popular research topic in the field of implants to treat critical bone defects. This review explores the popular Mg alloy research topics in the field of bone defects. Bibliometric analyses demonstrate that the degradation control and mechanical properties of Mg alloys are the main research focus for the treatment of bone defects. Furthermore, the additive manufacturing (AM) of Mg alloys is a promising approach for treating bone defects using implants with customized structures and functions. This work reviews the state of research on AM-Mg alloys and the current challenges in the field, mainly from the two aspects of controlling the degradation rate and the fabrication of excellent mechanical properties. First, the advantages, current progress, and challenges of the AM of Mg alloys for further application are discussed. The main mechanisms that lead to the rapid degradation of AM-Mg are then highlighted. Next, the typical methods and processing parameters of laser powder bed fusion fabrication on the degradation characteristics of Mg alloys are reviewed. The following section discusses how the above factors affect the mechanical properties of AM-Mg and the recent research progress. Finally, the current status of research on AM-Mg for bone defects is summarized, and some research directions for AM-Mg to drive the application of clinical orthopedic implants are suggested.

Improving hydroxyapatite coating ability on biodegradable metal through laser-induced hydrothermal coating in liquid precursor: Application in orthopedic implants

During the past decade, there has been extensive research toward the possibility of exploring magnesium and its alloys as biocompatible and biodegradable materials for implantable applications. Its practical medical application, however, has been limited to specific areas owing to rapid corrosion in the initial stage and the consequent complications. Surface coatings can significantly reduce the initial corrosion of Mg alloys, and several studies have been carried out to improve the adhesion strength of the coating to the surfaces of the alloys. The composition of hydroxyapatite (HAp) is very similar to that of bone tissue; it is one of the most commonly used coating materials for bone-related implants owing to favorable osseointegration post-implantation. In this study, HAp was coated on Mg using nanosecond laser coating, combining the advantages of chemical and physical treatments. Photothermal heat generated in the liquid precursor by the laser improved the adhesion of the coating through the precipitation and growth of HAp at the localized nanosecond laser focal area and increased the corrosion resistance and cell adhesion of Mg. The physical, crystallographic, and chemical bondings were analyzed to explore the mechanism through which the surface adhesion between Mg and the HAp coating layer increased. The applicability of the coating to Mg screws used for clinical devices and improvement in its corrosion property were confirmed. The liquid environment-based laser surface coating technique offers a simple and quick process that does not require any chemical ligands, and therefore, overcomes a potential obstacle in its clinical use.

Potential bioactive coating system for high-performance absorbable magnesium bone implants

Magnesium alloys are considered the most suitable absorbable metals for bone fracture fixation implants. The main challenge in absorbable magnesium alloys is their high corrosion/degradation rate that needs to be controlled. Various coatings have been applied to magnesium alloys to slow down their corrosion rates to match their corrosion rate to the regeneration rate of the bone fracture. In this review, a bioactive coating is proposed to slow down the corrosion rate of magnesium alloys and accelerate the bone fracture healing process. The main aim of the bioactive coatings is to enhance the direct attachment of living tissues and thereby facilitate osteoconduction. Hydroxyapatite, collagen type I, recombinant human bone morphogenetic proteins 2, simvastatin, zoledronate, and strontium are six bioactive agents that show high potential for developing a bioactive coating system for high-performance absorbable magnesium bone implants. In addition to coating, the substrate itself can be made bioactive by alloying magnesium with calcium, zinc, copper, and manganese that were found to promote bone regeneration.

•

Bioactive-coated magnesium implant could accelerate bone fracture healing time to match with magnesium degradation.

•

Hydroxyapatite, collagen type I, recombinant human bone morphogenetic proteins 2, simvastatin, zoledronate, and strontium are high potential bioactive coating materials.

•

The incorporation of Ca, Zn, Cu, Sr, and Mn in Mg base-metal could further enhance bone formation.

Fabrication and characterization of PHEMA–gelatin scaffold enriched with graphene oxide for bone tissue engineering

Background

Growing investigations demonstrate that graphene oxide (GO) has an undeniable impact on repairing damaged bone tissue. Moreover, it has been stated in the literatures that poly(2-hydroxyethyl methacrylate) (PHEMA) and gelatin could provide a biocompatible structure.

Methods

In this research, we fabricated a scaffold using freeze-drying method comprised of PHEMA and gelatin, combined with GO. The validation of the successful fabrication of the scaffolds was performed utilizing Fourier-transform infrared spectroscopy (FTIR) and X-ray diffraction assay (XRD). The microstructure of the scaffolds was observed using scanning electron microscopy (SEM). The structural properties of the scaffolds including mechanical strength, hydrophilicity, electrical conductivity, and degradation rate were also evaluated. Human bone marrow‐derived mesenchymal stem cells (hBM-MSCs) were used to evaluate the cytotoxicity of the prepared scaffolds. The osteogenic potential of the GO-containing scaffolds was studied by measuring the alkaline phosphatase (ALP) activity after 7, 14, and 21 days cell culturing.

Results

SEM assay showed a porous interconnected scaffold with approximate pore size of 50–300 μm, appropriate for bone regeneration. The increase in GO concentration from 0.25 to 0.75% w/v exhibited a significant improvement in scaffolds compressive modulus from 9.03 ± 0.36 to 42.82 ± 1.63 MPa. Conventional four-probe analysis confirmed the electrical conductivity of the scaffolds in the semiconductor range. The degradation rate of the samples appeared to be in compliance with bone healing process. The scaffolds exhibited no cytotoxicity using MTT assay against hBM-MSCs. ALP analysis indicated that the PHEMA–Gel–GO scaffolds could efficiently cause the differentiation of hBM-MSCs into osteoblasts after 21 days, even without the addition of the osteogenic differentiation medium.

Conclusion

Based on the results of this research, it can be stated that the PHEMA–Gel–GO composition is a promising platform for bone tissue engineering.

A review of current challenges and prospects of magnesium and its alloy for bone implant applications

Medical application materials must meet multiple requirements, and the designed implant must mimic the bone structure in shape and support the formation of bone tissue (osteogenesis). Magnesium (Mg) alloys, as a "smart" biodegradable material and as "the green engineering material in the twenty-first century", have become an outstanding bone implant material due to their natural degradability, smart biocompatibility, and desirable mechanical properties. Magnesium is recognised as the next generation of orthopaedic appliances and bioresorbable scaffolds. At the same time, improving the mechanical properties and corrosion resistance of magnesium alloys is an urgent challenge to promote the application of magnesium alloys. Nevertheless, the excessively quick deterioration rate generally results in premature mechanical integrity disintegration and local hydrogen build-up, resulting in restricted clinical bone restoration applicability. The condition of Mg bone implants is thoroughly examined in this study. The relevant approaches to boost the corrosion resistance, including purification, alloying treatment, surface coating, and Mg-based metal matrix composite, are comprehensively revealed. These characteristics are reviewed to assess the progress of contemporary Mg-based biocomposites and alloys for biomedical applications. The fabricating techniques for Mg bone implants also are thoroughly investigated. Notably, laser-based additive manufacturing fabricates customised forms and complicated porous structures based on its distinctive additive manufacturing conception. Because of its high laser energy density and strong controllability, it is capable of fast heating and cooling, allowing it to modify the microstructure and performance. This review paper aims to provide more insight on the present challenges and continued research on Mg bone implants, highlighting some of the most important characteristics, challenges, and strategies for improving Mg bone implants.

Simultaneous Precipitation and Electrodeposition of Hydroxyapatite Coatings at Different Temperatures on Various Metal Substrates

The coating of orthopedic and dental implants with hydroxyapatite (HA) is recognized as a method to increase their integration ability. A new metal coating method, comprising simultaneous precipitation and electrodeposition, is presented. Two studies are described: the first is related to the influence of time/temperature increase on the morpho-structural characteristics of the deposited layer on the Ti substrate, while the second study presents the characteristics of the layers deposited on different metal substrates. For comparison, specimens were obtained using the classical electrochemical deposition under the same experimental conditions. The addition of Ca to the electrolyte creates more compact and more uniform coatings, while the addition of P creates more porous layers. Only a very small quantity of crystalline HA deposited on the C55, Cu, and Ni substrates when the classic electrodeposition method was employed, while using the new approach has clearly led to a larger crystalline HA amount electrodeposited on the same types of metals. With some exceptions, the advantages of using the new method are: better crystallinity, more uniform and continuous surface, higher roughness, and potentially higher anti-corrosion capabilities.

Improving in vitro and in vivo corrosion resistance and biocompatibility of Mg-1Zn-1Sn alloys by microalloying with Sr

Magnesium (Mg) and its alloys have attracted attention as potential biodegradable materials in orthopedics due to their mechanical and physical properties, which are compatible with those of human bone. However, the effect of the mismatch between the rapid material degradation and fracture healing caused by the adverse effect of hydrogen (H2), which is generated during degradation, on surrounding bone tissue has severely restricted the application of Mg and its alloys. Thus, the development of new Mg alloys to achieve ideal degradation rates, H2 evolution and mechanical properties is necessary. Herein, a novel Mg-1Zn-1Sn-xSr (x = 0, 0.2, 0.4, and 0.6 wt%) quaternary alloy was developed, and the microstructure, mechanical properties, corrosion behavior and biocompatibility in vitro/vivo were investigated. The results demonstrated that a minor amount of strontium (Sr) (0.2 wt %) enhanced the corrosion resistance and mechanical properties of Mg-1Zn-1Sn alloy through grain refinement and second phase strengthening. Simultaneously, due to the high hydrogen overpotential of tin (Sn), the H2 release of the alloys was significantly reduced. Furthermore, Sr-containing Mg-1Zn-1Sn-based alloys significantly enhanced the viability, adhesion and spreading of MC3T3-E1 cells in vitro due to their unique biological activity and the ability to spontaneously form a network structure layer with micro/nanotopography. A low corrosion rate and improved biocompatibility were also maintained in a rat subcutaneous implantation model. However, excessive Sr (>0.2 wt %) led to a microgalvanic reaction and accelerated corrosion and H2 evolution. Considering the corrosion resistance, H2 evolution, mechanical properties and biocompatibility in vitro and in vivo, Mg-1Zn-1Sn-0.2Sr alloy has tremendous potential for clinical applications.

Microstructure, morphology and physicochemical properties of nanocomposites containing hydroxyapatite/vivianite/graphene oxide for biomedical applications

Designing a nanocomposite that accumulates biocompatibility and antimicrobial behaviour is an essential requirement for biomedical applications. Hydroxyapatite (HAP), graphene oxide, and vivianite in one ternary nanocomposite with three phases and shapes led to an increase in cell viability to 97.6% ± 4 for the osteoblast cells in vitro. The obtained nanocomposites were investigated for their structural features using X-ray diffraction, while the microstructure features were analyzed using a scanning electron microscope (SEM) and a transmission electron microscope. The analysis showed a decrease in the crystal size to 13 nm, while the HAP grains reached 30 nm. The elongated shape of vivianite reached 200 nm on SEM micrographs. The monoclinic and hexagonal crystal systems of HAP and vivianite were presented in the ternary nanocomposite. The maximum roughness peak height reached 236.1 nm for the ternary nanocomposite from 203.3 nm, while the maximum height of the roughness parameter reached 440.7 nm for the di-nanocomposite of HAP/graphene oxide from 419.7 nm. The corrosion current density reached 0.004 μA/cm² . The ferrous (Fe²⁺ ) and calcium (Ca²⁺ ) ions released were measured and confirmed. Therefore, the morphology of the nanocomposites affected bacterial activity. This was estimated as an inhibition zone and reached 14.5 ± 0.9 and 13.4 ± 1.1 mm for Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) after 24 h. The increase in viability and the antibacterial activity refer to the compatibility of the nanocomposite in different medical applications.

Enhanced Corrosion Resistance and In Vitro Biocompatibility of Mg-Zn Alloys by Carbonate Apatite Coating

B-type carbonate apatite (CAp) coatings were formed on as-cast and T4-treated Mg-xZn (x = 1, 5, and 7 wt %) alloys containing various sized Zn-rich second phase to improve the corrosion resistance and biocompatibility. The CAp coating grew uniformly on the alloys with a thickness of 1.1-1.3 μm and did not show cracks or pores on 30 μm-sized second-phase particles. The CAp coating retarded corrosion of Mg-Zn substrates for the first 3-5 days in Hanks' solution. Polarization resistance of the CAp-coated alloys was 10-90 and 1-70 times higher than the uncoated and hydroxyapatite (HAp)-coated alloys, respectively. The corrosion rate of CAp-coated alloys was greatly affected by the substrate alloys once the coatings were partly broken. The CAp-coated alloys showed 40-60 and 25-45% lower 14-day average corrosion rates than the uncoated and HAp-coated alloys, respectively, in the immersion test. The CAp coating significantly enhanced the viability of osteoblastic MC3T3-E1 cells on the Mg-Zn alloys for 72 h compared to the uncoated and HAp-coated alloys. The cell densities on CAp-coated alloys were similar for 72 h regardless of substrate alloys. Therefore, the CAp coating can be a superior coating candidate for corrosion-control and biocompatibility improvement for biodegradable Mg alloys.

Characterization and Corrosion Properties of Fluoride Conversion Coating Prepared on AZ31 Magnesium Alloy

Wrought AZ31 magnesium alloy was used as the experimental material for fluoride conversion coating preparation in Na[BF4] molten salt. Two coating temperatures, 430 °C and 450 °C, and three coating times, 0.5, 2, and 8 h, were used for the coating preparation. A scanning electron microscope and energy-dispersive X-ray spectroscopy were used for an investigation of the surface morphology and the cross-sections of the prepared coatings including chemical composition determination. The corrosion resistance of the prepared specimens was investigated in terms of the potentiodynamic tests, electrochemical impedance spectroscopy and immersion tests in the environment of simulated body fluids at 37 ± 2 °C. The increase in the coating temperature and coating time resulted in higher coatings thicknesses and better corrosion resistance. Higher coating temperature was accompanied by smaller defects uniformly distributed on the coating surface. The defects were most probably created due to the reaction of the AlxMny intermetallic phase with Na[BF4] molten salt and/or with the product of its decomposition, BF3 compound, resulting in the creation of soluble Na3[AlF6] and AlF3 compounds, which were removed from the coating during the removal of the secondary Na[MgF3] layer. The negative influence of the AlxMny intermetallic phase was correlated to the particle size and thus the size of created defects.

Effect of pH of coating solution on the adhesion strength and corrosion resistance of hydroxyapatite and octacalcium phosphate coated WE43 alloy

Hydroxyapatite (HAp) and octacalcium phosphate (OCP) layers were formed on Mg- 4mass% Y- 3mass% rare earth (WE43) alloy by a chemical solution deposition method at various pH values of pH 5.5, 6.2, 7.5, and 8.6. Adhesion strength of HAp and OCP layers was evaluated before and after immersing in a medium for 14 days by a pull-off test. The corrosion resistance of these coatings was measured by polarization tests performed in a simulated body fluid (SBF). XRD analysis demonstrated that HAp coating layers were formed at pH 7.5 and 8.6, while OCP coating layers were formed at pH 5.5 and 6.2. Adhesion test results showed that the as-coated pH7.5-HAp layer had the highest adhesion strength of 8.6 MPa, which was attributed to the very dense structure of the coating layer. The as-coated pH8.6-HAp layer showed the adhesion strength of 6.5 MPa. The adhesion strength of the as-coated pH5.5- and pH6.2-OCP layers was 3.9 and 7.1 MPa, respectively, that was governed by the thick and fragile property of the layers. After immersing in the medium for 14 days, the adhesion strength of pH7.5- and pH8.6-specimens decreased to 5.8 and 5.6 MPa, respectively. The pitting corrosion and formation of Mg(OH)₂ under the HAp layers were responsible for the decrease of adhesion strength. The polarization tests in SBF at 37 °C showed that the corrosion current density decreased with the HAp and OCP coatings, indicating the improvement of the corrosion resistance of WE43 alloy. The HAp coatings improved the corrosion resistance more efficiently than the OCP coatings.

Calcium phosphate coatings enhance biocompatibility and degradation resistance of magnesium alloy: Correlating in vitro and in vivo studies

Magnesium (Mg) and its alloys are promising biodegradable materials for orthopedic applications. However, one of the major problems is their rapid degradation rate with quick evolution of hydrogen gas. To overcome this problem, calcium phosphate (CaP) coatings have been used to improve the degradation resistance and the biocompatibility of Mg materials. This study focuses on the comparison and correlation of the in vitro and in vivo degradation and biocompatibility behaviors of these materials. A CaP coating consisting of dicalcium phosphate dihydrate (DCPD) was deposited on an AZ60 Mg alloy by the chemical conversion method. Then, the in vitro degradation testing including electrochemical and immersion tests, and in vivo implantation of the CaP coated Mg alloy were conducted to compare the degradation behaviors. Next, the in vitro cell behavior and in vivo bone tissue response were also compared on both uncoated and CaP-coated Mg samples. Data showed that the CaP coating provided the Mg alloy with significantly better biodegradation behavior and biocompatibility. The in vitro and in vivo biocompatibility tests exhibited good consistency while not the case for biodegradation. Results showed that the in vitro electrochemical test could be a quick screening tool for the biodegradation rate, while the in vitro immersion degradation rate was often 2-4 folds faster than the in vivo degradation rate.

In vitro biodegradation behavior of biodegradable hydroxyapatite coated AZ31 alloy treated at various pH values

OBJECTIVES

The aim of this study is to evaluate the effect of pH treatment on the formation of hydroxyapatite (HA) coating layer and the biodegradation rate of hydroxyapatite coated AZ31 alloy for applications in biodegradable implants.

METHODS

HA was grown on the surface of AZ31 substrate at three different pH solutions of 7.5, 9.0, and 10.5 respectively by chemical solution treatment method. The coated samples were evaluated their biodegradation behavior by immersion test in the simulated body fluid (SBF) for 14 days. The biodegradation rate of the samples during immersion test was observed by Mg²⁺ ion quantification method and measuring the increase of pH of the medium.

RESULTS

HA coatings were successfully grown on the AZ31 substrate at three different pH conditions. The sample coated at pH 7.5 showed its uniform and dense coating layer resulted in highest corrosion resistance. While the highest biodegradation rate was observed for the sample coated at pH 10.5 due to many micro-cracks formed in the HA layer. After 14 days of immersion, Mg(OH)₂ and calcium phosphate were corrosion products on the surface of the specimens coated at pH 10.5 and pH 9.0 respectively. While HA almost remained on the surface of sample coated at pH 7.5.

CONCLUSION

AZ31 alloy coated with HA at pH 7.5 has lowest biodegradation rate and become suitable for applications in biodegradable implants.

Tuning of the Mg Alloy AZ31 Anodizing Process for Biodegradable Implants

Coatings were grown on the AZ31 Mg alloy by a hard anodizing process in the hot glycerol phosphate-containing electrolyte. Anodizing conditions were optimized, maximizing corrosion resistance estimated by impedance measurements carried out in Hank's solution at 37 °C. A post anodizing annealing treatment (350 °C for 24 h) allowed us to further enhance the corrosion resistance of the coatings mainly containing magnesium phosphate according to energy-dispersive X-ray spectroscopy and Raman analyses. Gravimetric measurements revealed a hydrogen evolution rate within the limits acceptable for application of AZ31 in biomedical devices. In vitro tests demonstrated that the coatings are biocompatible with a preosteoblast cell line.

In vivo degradation and bone formation behaviors of hydroxyapatite-coated Mg alloys in rat femur

Various coatings have been developed for biodegradable Mg alloys to control the degradation speed and to improve the bone conductivity. In this study, hydroxyapatite (HAp) coatings were formed on pure Mg, Mg-0.8mass% Ca (MgCa), Mg-4mass% Y-3mass% rare earth (RE) (WE43), Mg-3mass% RE-1mass% Y (EW31) and Mg-4mass% RE (RE4) alloy rods with a chemical solution deposition method. The HAp-coated and uncoated Mg/Mg alloy rods were implanted in the femurs of rats for 3-6 months, and the corrosion suppression and bone formation abilities of the HAp coating were examined using a scanning electron microscope. The corrosion rate of WE43 was suppressed by 1/3 with the HAp coating for 6 months, and the corrosion product showed very slow dissolution. The effect of the HAp coating for pure Mg and MgCa disappeared in 1-2 months with the thinning of the rods accompanying with the obvious dissolution of the corrosion products. The effect of the HAp coating for EW31 and RE4 was not stable due to the expansion and collapse of the corrosion products. The bone formation was enhanced on the HAp layers. Eventually, the HAp coating basically suppressed the corrosion initiation and corrosion progress of Mg substrates. The magnitude of the suppression effect depended mainly on the chemical and physical stability of the corrosion products.

Biocompatibility and Immune Response of a Newly Developed Volume-Stable Magnesium-Based Barrier Membrane in Combination with a PVD Coating for Guided Bone Regeneration (GBR)

To date, there are no bioresorbable alternatives to non-resorbable and volume-stable membranes in the field of dentistry for guided bone or tissue regeneration (GBR/GTR). Even magnesium (Mg) has been shown to constitute a favorable biomaterial for the development of stabilizing structures. However, it has been described that it is necessary to prevent premature degradation to ensure both the functionality and the biocompatibility of such Mg implants. Different coating strategies have already been developed, but most of them did not provide the desired functionality. The present study analyses a new approach based on ion implantation (II) with PVD coating for the passivation of a newly developed Mg membrane for GBR/GTR procedures. To demonstrate comprehensive biocompatibility and successful passivation of the Mg membranes, untreated Mg (MG) and coated Mg (MG-Co) were investigated in vitro and in vivo. Thereby a collagen membrane with an already shown biocompatibility was used as control material. All investigations were performed according to EN ISO 10993 regulations. The in vitro results showed that both the untreated and PVD-coated membranes were not cytocompatible. However, both membrane types fulfilled the requirements for in vivo biocompatibility. Interestingly, the PVD coating did not have an influence on the gas cavity formation compared to the uncoated membrane, but it induced lower numbers of anti-inflammatory macrophages in comparison to the pure Mg membrane and the collagen membrane. In contrast, the pure Mg membrane provoked an immune response that was fully comparable to the collagen membrane. Altogether, this study shows that pure magnesium membranes represent a promising alternative compared to the nonresorbable volume-stable materials for GBR/GTR therapy.

Hollow silica reinforced magnesium nanocomposites with enhanced mechanical and biological properties with computational modeling analysis for mandibular reconstruction

The present study investigates Mg-SiO₂ nanocomposites as biodegradable implants for orthopedic and maxillofacial applications. The effect of presence and progressive addition of hollow silica nanoparticles (0.5, 1, and 1.5) vol.% on the microstructural, mechanical, degradation, and biocompatibility response of pure Mg were investigated. Results suggest that the increased addition of hollow silica nanoparticles resulted in a progressive increase in yield strength and ultimate compressive strength with Mg-1.5 vol.% SiO₂ exhibiting superior enhancement. The response of Mg-SiO₂ nanocomposites under the influence of Hanks’ balanced salt solution revealed that the synthesized composites revealed lower corrosion rates, indicating rapid dynamic passivation when compared with pure Mg. Furthermore, cell adhesion and proliferation of osteoblast cells were noticeably higher than pure Mg with the addition of 1 vol.% SiO₂ nanoparticle. The biocompatibility and the in vitro biodegradation of the Mg-SiO₂ nanocomposites were influenced by the SiO₂ content in pure Mg with Mg-0.5 vol.% SiO₂ nanocomposite exhibiting the best corrosion resistance and biocompatibility when compared with other nanocomposites. Enhancement in mechanical, corrosion, and biocompatibility characteristics of Mg-SiO₂ nanocomposites developed in this study are also compared with properties of other metallic biomaterials used in alloplastic mandibular reconstruction in a computational model.

Osteogenic Effect of a Biodegradable BMP-2 Hydrogel Injected into a Cannulated Mg Screw

Cannulated screws, containing an internal hole for inserting a guide pin, are commonly used in the management of bone fractures. Cannulated Mg screws can be biodegraded easily because their increased surface area including that of the inner hole rapidly reacts with body fluids. To delay biodegradation of cannulated Mg screws and improve bone regeneration, we developed a specific type of screw by injecting it with gelatin hydrogels [10 wt % gelatin_(gel) with 0.09 v/v % glutaraldehyde (cross-linker)] containing different concentrations (5, 10, or 25 μg/mL) of bone morphogenic proteins (BMPs). We analyzed the properties and biocompatibility of the screws with and without BMP-2 and found that the release rate of BMP-2 in the hydrogel changed proportionately with the degradation rate of the cross-linked hydrogel. Loading BMP-2 in the hydrogel resulted in sustained release of BMP-2 for 25 to 40 days or more. The degradation rate of BMP-2 hydrogels was inversely proportional to the concentration of BMP-2. The injection of the hydrogels in the cannulated screw delayed biodegradation inside of the screw by simulated body fluid. It also induced uniform corrosion and the precipitation of bioactive compounds onto the surface of the screw. In addition, osteoblast proliferation was very active near the BMP-2 hydrogels, depending on the BMP-2 concentration. The BMP-2 in the hydrogel improved cell differentiation. The cannulated screw injected with 10 μL/mL BMP-2 hydrogel prevented implant biodegradation and enhanced osteoconduction and osteointegration inside and outside the screw. In addition, the properties of BMP-2-loaded hydrogels can be changed by controlling the amount of the cross-linker and protein, which could be useful for tissue regeneration in other fields.

An in vitro and in vivo comparison of Mg(OH)2-, MgF2- and HA-coated Mg in degradation and osteointegration

Magnesium hydroxide (Mg(OH)₂), magnesium fluoride (MgF₂), and hydroxyapatite (HA) films on Mg are widely studied owing to their easy preparation and favorable corrosion protection. Nevertheless, the most suitable film with the best performance for biomedical applications between the three films remains unknown. Therefore, the performance of the three coatings from in vitro to in vivo must be systematically investigated. In this study, Mg(OH)₂, MgF₂, and HA films were fabricated on pure Mg. Electrochemical analysis and the hydrogen evolution test suggested that the HA film showed the best in vitro corrosion resistance, followed by MgF₂ and Mg(OH)₂ films. In vitro cell culture indicated that the extract of the MgF₂-coated sample was most beneficial for the osteogenic differentiation of MC3T3-E1 cells and the vascularization of human umbilical vein endothelial cells (HUVECs), which might be ascribed to the existence of the F element in the film. The result of this subcutaneous implantation showed that the HA film exhibited the best in vivo corrosion resistance and induced the lightest inflammatory response. Femoral implantation data revealed that the HA film exhibited the best osseointegration. Furthermore, the major organs and blood indicators of all of the tested rats were normal in 8 weeks. In summary, though the in vitro biological performance of the MgF₂ film was the best among the three films, the HA film showed the best in vivo performance, suggesting that it is a more promising modification method for orthopedic applications.

Osteoclast and osteoblast responsive carbonate apatite coatings for biodegradable magnesium alloys

Corrosion-control coatings which can enhance bone formation and be completely replaced by bone are attractive for biodegradable Mg alloys. Carbonate apatite (CAp) and hydroxyapatite (HAp) coatings were formed on Mg-4 wt% Y-3 wt% rare earth (WE43) alloy as a corrosion-control and bioabsorbable coating in the coating solution with various concentrations of NaHCO₃. The incorporation of carbonate group in apatite structure was examined using X-ray diffraction and Fourier transform infrared spectroscopy. Rat osteoclast precursor and MC3T3-E1 osteoblast cells were cultured on the CAp- and HAp-coated WE43 to examine the osteoclastic resorption and the alkaline phosphatase (ALP) activity, respectively. Mg ions in the used medium were quantified to examine the corrosion-control ability. The NaHCO₃ addition in the solution resulted in the formation of B-type CAp in which the phosphate group of apatite structure was substituted with the carbonate group. The osteoclastic resorption was observed only for the CAp coatings as the cracking of the coatings and the corrosion of substrate WE43 strongly localized under osteoclast cell bodies. The CAp and HAp coatings significantly enhanced the ALP activity of osteoblasts. The CAp-coated WE43 specimens showed 1/5 smaller amount of Mg ion release than the uncoated WE43 on the first day of culturing osteoblasts. For the subsequent 22 days, the Mg ion release was reduced to 1/2 by the CAp coatings. In the presence of osteoclasts, the CAp coatings showed slightly lower corrosion protectiveness than the HAp coating. It was demonstrated that the CAp coatings can be a bioabsorbable and corrosion-control coating for biodegradable Mg alloys.

Bio-inspired biomaterial Mg-Zn-Ca: a review of the main mechanical and biological properties of Mg-based alloys

The toxicity of alloying elements in magnesium alloys used for biomedical purposes is an interesting and innovative subject, due to the great technological advances that would result from their application in medical devices (MDs) in traumatology. Recently promising results have been published regarding the rates of degradation and mechanical integrity that can support Mg alloys; this has led to an interest in understanding the toxicological features of these emerging biomaterials. The growing interest of different segments of the MD market has increased the determination of different research groups to clarify the behavior of alloying elements in vivo. This review covers the influence of the alloying elements on the body, the toxicity of the elements in Mg-Zn-Ca, as well as the mechanical properties, degradation, processes of obtaining the alloy, medical approaches and future perspectives on the use of the Mg in the manufacture of MDs for various medical applications.

A Review of In-Vivo and In-Vitro Real-Time Corrosion Monitoring Systems of Biodegradable Metal Implants

In current modern medicine, biodegradable metal implants are still considered a work-in-progress between the collaborations of both scientists and engineers. As of now, one of the obstacles to this development is monitoring the corrosion rate of the implant. When a biodegradable metal implant (made of Mg, Zn, etc.) is introduced into the harsh environment of the human body, corrosion naturally occurs, causing metal ions to be released which may result in undesired health effects. The released products of the corroding implant can be used to monitor the implant condition. This paper discusses the current real-time corrosion monitoring systems (i.e., electrochemical-, microsensor-, and microdialysis-based) in-vivo and in-vitro. It is acknowledged that the progress in this sector still requires extensive research in order to obtain a desirable monitoring system and it is hoped that this review paper contributes to the research.

Fabrication and characterization of silk fibroin coating on APTES pretreated Mg-Zn-Ca alloy

To delay the degradation of magnesium alloys, silk fibroin as a natural organic polymer coating was fabricated on a 3-amino-propyltriethoxysilane (APTES) pretreated Mg-Zn-Ca alloy. APTES pretreatment coated the surface of magnesium alloys with amino groups, which can bond with functional groups in silk fibroin to form a compact coating/substrate interface. The influences of the APTES concentration and drying temperature on the coating adhesion and interface were investigated to explore the optimal parameters in the fabrication process. The nanoporous silk fibroin films completely covered the APTES pretreated Mg-Zn-Ca surface, which reached a thickness of ~7 μm. The chemical states for the coated Mg-Zn-Ca alloy were compared to those of the bare Mg-Zn-Ca alloy and the APTES pretreated Mg-Zn-Ca alloy to illustrate the coating mechanism. During in vitro degradation and electrochemical measurements in simulated body fluid (SBF), the samples with the silk fibroin coating showed remarkably improved corrosion resistance and a slower degradation rate compared to those of the bare samples, suggesting that the silk fibroin coating was an effective protection coating for the substrates and can delay the degradation of magnesium alloys. Moreover, a model for the in vitro degradation was proposed. In vitro cell experiments confirmed the excellent biocompatibility of silk fibroin coated Mg-Zn-Ca structure.

Enhanced osteoinductivity and corrosion resistance of dopamine/gelatin/rhBMP-2-coated β-TCP/Mg-Zn orthopedic implants: An in vitro and in vivo study

Magnesium-based biomaterials are attracting increasingly more attention for orthopedic applications based on their appropriate mechanical properties, biodegradability, and favorable biocompatibility. However, the high corrosion rate of these materials remains to be addressed. In this study, porous β-Ca3(PO4)2/Mg-Zn (β-TCP/Mg-Zn) composites were fabricated via a powder metallurgy method. The β-TCP/Mg-Zn composites with 6% porosity exhibited optimal mechanical properties, and thus, they were selected for surface modification. A novel dopamine/gelatin/recombinant human bone morphogenetic protein-2 (rhBMP-2) coating with demonstrated stability was prepared to further improve the corrosion resistance of the composite and enhance early osteoinductivity. The homogeneously coated β-TCP/Mg-Zn composite showed significantly improved corrosion resistance according to electrochemical and immersion tests. In addition, extracts from the dopamine/gelatin/rhBMP-2-coated β-TCP/Mg-Zn composite not only facilitated cell proliferation but also significantly enhanced the osteogenic differentiation of Sprague-Dawley rat bone marrow-derived mesenchymal stem cells in vitro. Furthermore, in vivo experiments were performed to evaluate the biodegradation, histocompatibility, and osteoinductive potential of the coated composite. No obvious pathological changes in the vital visceral organs were observed after implantation, and radiography and hematoxylin-eosin staining showed strong promotion of new bone formation, matched composite degradation and bone regeneration rates, and complete absorption of the released hydrogen gas. Collectively, these results indicate that the dopamine/gelatin/rhBMP-2-coated β-TCP/Mg-Zn composite offers improved corrosion resistance, favorable biocompatibility, and enhanced osteoinductive potential for use in the fabrication of orthopedic implants.

Effect of Hydrothermal (Sr)-Hydroxyapatite Coatings on the Corrosion Resistance and Mg2+ Ion Release to Enhance Osteoblastic Cell Responses of AZ91D Alloy

The biomedical applications of Mg-based alloys are limited by their rapid corrosion rate in the body fluid. In this study, the hydrothermal synthesis is employed to produce protective bioactive hydroxyapatite coating (HAC) and strontium-substituted hydroxyapatite coating (Sr-HAC) to further enhance the corrosion resistance and in vitro biocompatibility of biodegradable AZ91D Mg alloy in physiological environments. For comparison, the brucite Mg(OH)₂ prepared by the alkaline pre-treatment is designated as a control group. Experimental evidences of XRD and XPS analysis confirm that Sr²⁺ ions can be incorporated into HA crystal structure. It is noted that the hydrothermally synthesized Sr-HAC conversion coating composed of a specific surface topography with the nanoscaled flake-like fine crystallites is constructed on the AZ91D Mg alloy. The hydrophilicity of Mg substrate is effectively enhanced with the decrease in static contact angles after performing alkaline and hydrothermal treatments. Potentiodynamic polarization measurements reveal that the nanostructured Sr-HAC-coated specimens exhibit superior corrosion resistance than HAC and alkaline pre-treated Mg(OH)₂. Moreover, immersion tests demonstrate that Sr-HAC provides favorable long-term stability for the Mg alloy with decreasing concentration of released Mg²⁺ ions in the SBF and the reduced corrosion rate during the immersion length of 30 days. The cells cultured on Sr-HAC specimens exhibit higher viability than those on the alkaline-pre-treated Mg(OH)₂ and HAC specimens. The Sr-substituted HA coating with a nanostructured surface topography can help to stimulate the cell viability of osteoblastic cells.

Enhanced corrosion resistance and bioactivity of Mg alloy modified by Zn-doped nanowhisker hydroxyapatite coatings

In this work, Zn is doped into a hydroxyapatite coating on the surface of ZK60 magnesium alloys using a one-pot hydrothermal method to obtain a corrosion-resistant implant with abilities of osteogenic differentiation and bacterial inhibition. With the addition of Zn, the morphology changes with a nanowhisker structure appearing on the coating. Electrochemical measurements show that the nanowhisker hydroxyapatite coating provides a high corrosion resistance. Compared with hydroxyapatite coating, the nanowhisker coating not only effectively inhibits bacteria, but also promotes the adhesion and differentiation of rat bone marrow mesenchymal stem cells at appropriate Zn concentrations. In conclusion, a novel nanowhisker structure prepared by a single variable Zn doping can significantly improve the corrosion resistance and biological activity of hydroxyapatite coatings.

In Vitro Corrosion and Cell Response of Hydroxyapatite Coated Mg Matrix in Situ Composites for Biodegradable Material Applications

In this study, hydroxyapatite (HAp) coated Mg matrix composites were fabricated for biodegradable implant applications. Spark plasma sintering was employed to fabricate the Mg-10 wt% ZnO composite substrates. HAp was coated on the surface of the sintered composites and pure Mg by a chemical solution treatment. SEM and optical micrographs of coated samples showed that HAp grew homogeneously and formed a layer on the entire surface of both pure sintered Mg and Mg composites. The immersion and polarization test results demonstrated that the HAp coating significantly improved the corrosion resistance of the sintered composites. While the HAp coating layer is not effective in the improvement of the pure Mg substrate, cell culture test results revealed that the HAp coating improved cell adhesion and proliferation on the composites effectively through 72 h, while no cell could survive on the uncoated composites after 72 h. In addition, the corrosion tests and cell culture test results indicated that the composite with longer sintering time has better corrosion resistance and cell viability than those of the composite with shorter sintering time. The findings suggested that the HAp-coated Mg-10 wt% ZnO-2.5 h + 10 min composite is a high-potential candidate for biodegradable implant applications.

Preparation and performance evaluation of electrospun poly(3-hydroxybutyrate) composite scaffolds as a potential hard tissue engineering application

In the present study, poly(3-hydroxybutyrate)-based composite scaffolds were prepared with multi-walled carbon nanotubes and hydroxyapatite nanoparticles for hard tissue engineering applications by electrospinning. All the prepared scaffolds showed connective porous structure, which were suitable for cell proliferation and migration. The mechanical properties of the poly(3-hydroxybutyrate) scaffold were improved by 0.5% of carbon nanotube addition, whereas the addition of hydroxyapatite nanoparticles up to 10% had an insignificant effect in tensile strength. However, scanning electron microscopy and MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay results suggested that the mesenchymal stem cells attachment and their metabolic activities on the surface of the poly(3-hydroxybutyrate) scaffolds with hydroxyapatite were enhanced compared to poly(3-hydroxybutyrate) scaffolds. In addition, after 6 weeks of in vivo biocompatibility results in a model of rat indicated better tissue reactions for the scaffolds that contained hydroxyapatite. Overall, poly(3-hydroxybutyrate) composite scaffolds with 10% hydroxyapatite and 0.5% carbon nanotube showed optimal performances for the potential scaffold for hard tissue engineering application.

Magnesium matrix nanocomposites for orthopedic applications: A review from mechanical, corrosion, and biological perspectives

Magnesium (Mg) and some of its alloys have attracted extensive interests for biomedical applications as they exhibit biodegradability and low elastic modulus that is closer to natural bones than the currently used metallic implant materials such as titanium (Ti) and its alloys, stainless steels, and cobalt-chromium (Co-Cr) alloys. However, the rapid degradation of Mg alloys and loss of their mechanical integrity before sufficient bone healing impede their clinical application. Our literature review shows that magnesium matrix nanocomposites (MMNCs) reinforced with nanoparticles possess enhanced strength, high corrosion resistance, and good biocompatibility. This article provides a detailed analysis of the effects of nanoparticle reinforcements on the mechanical properties, corrosion behavior, and biocompatibility of MMNCs as promising biodegradable implant materials. The governing equations to quantitatively predict the mechanical properties and underlying synergistic strengthening mechanisms in MMNCs are elucidated. The potential, recent advances, challenges and future research directions in relation to nanoparticles reinforced MMNCs are highlighted. STATEMENT OF SIGNIFICANCE: Critically reviewing magnesium metal matrix nanocomposites (MMNCs) for the biomedical application. Clear definitions of strengthening mechanisms using reinforcement particle in the magnesium matrix, as there were controversial in governing equations of strengthening parameters. Providing better understanding of the effect of particle size, volume fraction, interfacial bonding, and uniform dispersion of reinforcement particles on MMNCs.

Adsorption of Serum Albumin onto Octacalcium Phosphate in Supersaturated Solutions Regarding Calcium Phosphate Phases

Octacalcium phosphate (OCP) has been shown to enhance new bone formation, coupled with its own biodegradation, through osteoblasts and osteoclast-like cell activities concomitant with de novo hydroxyapatite (HA) formation and serum protein accumulation on its surface. However, the nature of the chemical environment surrounding OCP and how it affects its metabolism and regulates protein accumulation is unknown. The present study examined how the degree of supersaturation (DS) affects the bovine serum albumin (BSA) adsorption onto OCP in 150 mM Tris-HCl buffer at 37 °C and pH 7.4, by changing the Ca²⁺ ion concentration. The amount of BSA adsorbed onto OCP increased as the DS increased. In addition, the amount of newly formed calcium phosphate, which could be OCP, was increased, not only by increases in DS, but also at lower equilibrium concentrations of BSA. The increased adsorption capacity of BSA was likely related to the formation of calcium phosphate on the adsorbed OCP. Together the results suggested that the formation of new calcium phosphate crystals is dependent on both the DS value and the adsorbate protein concentration, which may control serum protein accumulation on the OCP surface in vivo.

Osteogenic and pH stimuli-responsive self-healing coating on biomedical Mg-1Ca alloy

Various coatings have been used to slow down the corrosion rate of biomedical magnesium alloys. However, these coatings usually act only as passive barriers. It is much more desirable to endow such coatings with active, biocorrosion-responsive self-repairing capacity. In the present work, a self-healing coating system (denoted as "silk-PA") was constructed in the form of a sandwich architecture of fluoride precoating (bottom), silk-phytic acid (PA) coating (middle), and silk fibroin coating (top). Here, PA was loaded in the middle coating as a corrosion inhibitor by harnessing its strong chelating ability toward dissolving Mg²⁺ and Ca²⁺ ions. The self-healing property was evaluated by scratch and SVET tests, and the corrosion resistance was evaluated by in vitro immersion and electrochemical measurements. The results showed that the silk-PA manifested intriguing self-healing capacity with pH responsiveness, hence profiting the corrosion resistance of the Mg-1Ca alloy. The biocompatibility and osteogenic activity of the coating system were further evaluated using MC3T3-E1 cells, and it demonstrated favorable responses in multiple cellular behaviors, i.e., adherence, spreading, proliferation, and differentiation. These findings open new opportunities in the study of self-healing coatings for protection against corrosion in biomedical Mg alloys. STATEMENT OF SIGNIFICANCE: In the present study, a self-healing coating system with pH stimuli-responsiveness and osteogenic activity was fabricated on Mg-1Ca alloy by integrating a silk fibroin barrier coating, a silk fibrin/phytic acid composite coating, and a fluoride precoating. This coating system demonstrated interesting self-healing ability as compared to traditional surface modification layers. Furthermore, the self-healing ability enhanced the corrosion resistance of biomedical magnesium alloys, while effective compositions of the coating system endowed the substrate with osteogenic activity. This work provides some new insights into smart surface modification for biomedical Mg alloys.

Silk fibroin film-coated MgZnCa alloy with enhanced in vitro and in vivo performance prepared using surface activation

Magnesium and its alloys have generated considerable interest as one of the most promising biodegradable metals for biomedical bone implants. However, the enormous challenges are to improve their rapid corrosion excessively as well as to endow them with biocompatibility and biosafety. Herein, we introduce a natural silk fibroin protein coating to control the corrosion resistance and enhance the biocompatibility of MgZnCa alloy. To obtain a robust and reliable coated structure, different surface-activation processes are employed to increase the available functional groups on MgZnCa surfaces before coating. Compared to oxygen plasma activation, our unique vacuum ultraviolet-ozone (VUV/O₃) activation method is effective in realizing uniform silk fibroin films as a protective barrier on MgZnCa alloy surfaces, and the nanoscratch test verified the superior adhesion strength of the silk fibroin-coated magnesium alloy structure. Long-term immersion results combined with electrochemical tests showed the preferable in vitro anticorrosion behavior and a low degradation rate of coated Mg alloy (1/8 times that of uncoated Mg alloy). Cell adhesion and cytotoxicity tests demonstrated that silk fibroin-coated MgZnCa presented improved biocompatibility with bone marrow mesenchymal stem cells. An animal study involving silk fibroin-coated MgZnCa implanted on one side of a rabbit spine for 180 days showed remarkably improved in vivo corrosion resistance, with 1/18 times the degradation rate of uncoated MgZnCa. These results not only comprehensively confirmed the validity of the VUV/O₃-activation method as a coating strategy but also implied the tremendous potential of the modified Mg alloy for application as a degradable biomedical implant material. STATEMENT OF SIGNIFICANCE: MgZnCa alloy is a promising material in clinical implantation. Silk fibroin (SF) is a natural organic material with biocompatibility and biodegradability. To date, the combination of SF and MgZnCa alloy has exhibited considerable prospects for orthopedic applications. The realization of a direct coating is an enormous challenge because strong chemical bonds cannot be easily formed between organic and inorganic materials. To solve this bottleneck, we proposed a unique vacuum ultraviolet-ozone (VUV/O₃) surface-activation method for the first time to modify the Mg alloy surface before SF coating, which significantly enhanced both in vitro and in vivo performance, such as superior biocompatibility and remarkably improved corrosion resistance of magnesium alloys (∼1/18 the in vivo degradation rate of uncoated MgZnCa).

In-Vivo Corrosion Characterization and Assessment of Absorbable Metal Implants

Absorbable metals have been introduced as materials to fabricate temporary medical implants. Iron, magnesium and zinc have been considered as major base elements of such metals. The metallurgical characterization and in-vitro corrosion assessment of these metals have been covered by the new ASTM standards F3160 and F3268. However, the in-vivo corrosion characterization and assessment of absorbable metal implants are not yet well established. The corrosion of metals in the in-vivo environment leads to metal ion release and corrosion product formation that may cause excessive toxicity. The aim of this work is to introduce the techniques to assess absorbable metal implants and their in-vivo corrosion behavior. This contains the existing approaches, e.g., implant retrieval and histological analysis, ultrasonography and radiography, and the new techniques for real-time in-vivo corrosion monitoring.

In vitro and in vivo analysis of the biodegradable behavior of a magnesium alloy for biomedical applications

The present study was designed to investigate the biodegradation behavior of Mg alloy plates in the maxillofacial region. For in vitro analysis, the plates were immersed in saline solution and simulated body fluid. For in vivo, the plates were implanted into the tibia, head, back, abdominal cavity, and femur and assessed at 1, 2, and 4 weeks after implantation. After implantation, the plate volumes and the formed insoluble salt were measured via micro-computed tomography. SEM/EDX analysis of the insoluble salt and histological analysis of the surrounding tissues were performed. The volume loss of plates in the in vitro groups was higher than that in the in vivo groups. The volume loss was fastest in the abdomen, followed by the head, back, tibia, and femur. There were no statistically significant differences in the insoluble salt volume of the all implanted sites. The corrosion of the Mg alloy will be affected to the surrounding tissue responses. The material for the plate should be selected based on the characteristic that Mg alloys are decomposed relatively easily in the maxillofacial region.

The current trends of Mg alloys in biomedical applications-A review

Magnesium (Mg) has emerged as an ideal alternative to the permanent implant materials owing to its enhanced properties such as biodegradation, better mechanical strengths than polymeric biodegradable materials and biocompatibility. It has been under investigation as an implant material both in cardiovascular and orthopedic applications. The use of Mg as an implant material reduces the risk of long-term incompatible interaction of implant with tissues and eliminates the second surgical procedure to remove the implant, thus minimizes the complications. The hurdle in the extensive use of Mg implants is its fast degradation rate, which consequently reduces the mechanical strength to support the implant site. Alloy development, surface treatment, and design modification of implants are the routes that can lead to the improved corrosion resistance of Mg implants and extensive research is going on in all three directions. In this review, the recent trends in the alloying and surface treatment of Mg have been discussed in detail. Additionally, the recent progress in the use of computational models to analyze Mg bioimplants has been given special consideration. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 1970-1996, 2019.

Initial Stages of AZ31B Magnesium Alloy Degradation in Ringer′s Solution: Interpretation of EIS, Mass Loss, Hydrogen Evolution Data and Scanning Electron Microscopy Observations

The initial stages of corrosion of AZ31B magnesium alloy, immersed in Ringer′s solution at 37 °C body temperature for four days, have been evaluated by independent gravimetric and chemical methods and through electrochemical impedance spectroscopy (EIS) measurements. The corrosion current densities estimated by hydrogen evolution are in good agreement with the time-integrated reciprocal charge transfer resistance values estimated by EIS. The change in the inductive behavior has been correlated with difference in the chemical composition of corrosion layers. At the shorter immersion of 2 days, EDS analysis of cross section of the uniform corrosion layer detected Cl and Al elements, perhaps as formed aluminum oxychlorides salts.

Nanostructure coated AZ31 magnesium cylindrical mesh cage for potential long bone segmental defect repair applications

This current study is aimed towards the fabrication of AZ31 magnesium cylindrical mesh cage implant with circular holes for orthopedic applications. This mesh cage is coated with nanocomposite material containing polycaprolactone (PCL), pluronic F127 and nano hydroxyapatite (nHA) by electrospinning process. Morphology and composition were analyzed by various characterization techniques. Controlled degradation and weight loss of the nanocomposite coated samples in 28 days were observed when compared with uncoated samples in SBF (simulated body fluid). The nanocomposite coated material was not cytotoxic to MG63 osteosarcoma cells. The cell viability, morphology, ALP activity, calcium mineralization and collagen deposition were also better on this when compared to uncoated. Smooth and randomly deposited nanofibers on the mesh cage was observed and the contact angle indicated that the surface is hydrophilic with (initial contact angle of 55 ± 1° and after 10 s 0°) when compared to PCL (99°) coated surface. 2-5 fold higher mRNA expression levels of osteogenic genes namely ALP, BMP2, COL1 and RUNX2 was observed with nanocomposite coated scaffolds than uncoated and PCL coated samples in 14 days. These results indicate the potential use of the nanocomposite coated AZ31 cylindrical mesh cage for segmental bone defect repair and can be used as a degradable implant for orthopedic applications.