Cell patterning on polylactic acid through surface-tethered oligonucleotides

Recent Progress on Biodegradable Tissue Engineering Scaffolds Prepared by Thermally-Induced Phase Separation (TIPS)

Porous biodegradable scaffolds provide a physical substrate for cells allowing them to attach, proliferate and guide the formation of new tissues. A variety of techniques have been developed to fabricate tissue engineering (TE) scaffolds, among them the most relevant is the thermally-induced phase separation (TIPS). This technique has been widely used in recent years to fabricate three-dimensional (3D) TE scaffolds. Low production cost, simple experimental procedure and easy processability together with the capability to produce highly porous scaffolds with controllable architecture justify the popularity of TIPS. This paper provides a general overview of the TIPS methodology applied for the preparation of 3D porous TE scaffolds. The recent advances in the fabrication of porous scaffolds through this technique, in terms of technology and material selection, have been reviewed. In addition, how properties can be effectively modified to serve as ideal substrates for specific target cells has been specifically addressed. Additionally, examples are offered with respect to changes of TIPS procedure parameters, the combination of TIPS with other techniques and innovations in polymer or filler selection.

Versatile Cell-Specific Ligand Arrangement System onto Desired Compartments of Biodegradable Matrices for Site-Selective Cell Adhesion Using DNA Tags

A promising approach for the regeneration of tissues or organs with three-dimensional hierarchical structures is the preparation of scaffold-cell complexes that mimic these hierarchical structures. This requires an effective technique for immobilizing cell-specific ligands at arbitrarily chosen positions on matrices. Here, we report a versatile system for arranging cell-specific ligands onto desired compartments of biodegradable matrices for site-selective cell arrangement. We utilized the specific binding abilities of specific DNAs, immobilizing them as tags to arrange cell-recognition ligands at desired areas of the matrices by specific binding with cell-recognition ligand-DNA conjugates. We synthesized poly(l-lactide) (PLLA), a biodegradable polymer, with an oligo-DNA (trimer of deoxyguanosine: dG₃) attached via a poly(ethylene glycol) (PEG) spacer to generate dG₃-PEG-b-PLLA. The peptides Arg-Gly-Asp-Ser (RGDS) and Arg-Glu-Asp-Val (REDV) were chosen as cell-recognition ligands and were attached to an adapter DNA (aDNA), which can specifically bind to the dG₃ moiety through G-quadruplex formation. The obtained dG₃-PEG-b-PLLA was deposited on a small spot of the PLLA film, and the aDNA-RGDS or aDNA-REDV conjugate was added on the film to immobilize these ligands at the spot. We confirmed the specific adhesion of L929 cells (a mouse fibroblast cell line) and human umbilical vein endothelial cells (HUVECs) on the small areas coated with dG₃-PEG-b-PLLA in the presence of aDNA-RGDS and aDNA-REDV, respectively, even after applying shear stress by flowing medium across the spot. Cell-specific attachment of the target cells was effectively achieved in a spatially controlled manner. This technique has the potential for the construction of cell-scaffold complexes that mimic the hierarchical structures of natural organs and may represent a breakthrough in realizing regenerative medicine and tissue engineering of complex organs.

Pure polylysine-based foamy scaffolds and their interaction with MC3T3-E1 cells and osteogenesis

Polypeptide-derived copolymers have widely been exploited for drug/gene delivery due to their pendant functional groups and non-toxic degradation products. However, fabrication of polypeptide-based scaffolds for tissue engineering has seldom been reported. In this study, foamy poly(N _ε -benzyl formateoxycarbonyl-L-Lysine) (PZL) and poly(N _ε -benzyl formateoxycarbonyl-L-lysine-co-L-phenylalanine) (PZLP) scaffolds were successfully prepared by a combination of ring-opening polymerization of α-amino acid N-carboxyanhydride and negative porous NaCl templating approach. The physicochemical properties of these scaffolds including glass transition temperature, contact angle, compression modulus and degradation behavior were characterized. Both in vitro and in vivo biocompatibility of the scaffolds were evaluated by MC3T3-E1 cell culture and SD subcutaneous model, respectively. The results from live-dead staining, MTT and ALP activity assays indicated that PZL scaffolds were more conducive to the adhesion, proliferation and osteoblastic differentiation of MC3T3-E1 cells compared to PZLP scaffolds in the initial culture period due to their specific surface properties. While porous structure rather than surface properties of scaffolds played a decisive role in the later stage of cell culture. The results of in vivo studies including H&E, Masson's trichrome and CD34 staining further demonstrated that PZL scaffolds supported the ingrowth of microvessels than PZLP scaffolds due to their surface property difference. Collectively, PZL scaffolds displayed good biocompatibility and could be a promising candidate for tissue engineering application.

Conductive nanofibrous composite scaffolds based on in-situ formed polyaniline nanoparticle and polylactide for bone regeneration

Conducting polymers and biodegradable polylactide (PLA) scaffolds are both promising biomaterials applied in bone tissue engineering. It is necessary to develop a composite scaffold combining their properties of osteogenic differentiation promotion and three-dimension matrix. To conquer the problem of poor processability of conductive polymers, we use a novel in-situ polymerization/thermal induced phase separation (TIPS) method to fabricate conductive nanofibrous PLA scaffolds with well-distributed polyaniline (PANI) nano-structures. The simple preparation technique provides the possibility to scale-up production of these conductive nanofibrous composite scaffolds. The scaffold structure and content of in-situ formed polyaniline nanoparticles was thoroughly characterized with ¹H NMR, FT-IR, XPS, TGA, SEM and UV-vis, and the conductivity/electrochemical properties of the composite scaffolds were controlled with varied feed ratios of aniline to PLA. Meanwhile, the good cytocompatibility of these composite scaffolds was evaluated by culturing bone marrow derived mesenchymal stem cells (BMSCs) on them. The effect of conductive nanofibrous scaffolds on osteogenic differentiation was studied with expression levels of alkaline phosphatase (Alp), osteocalcin (Ocn) and runt-related transcription factor 2 (Runx2) during the culture of BMSCs for three weeks. The calcium mineralization of BMSCs is determined by alizarin red staining. These results indicated that a moderate content of PANI in the conductive nanofibrous scaffolds significantly promoted osteogenic differentiation of BMSCs for engineering bone tissues.

Mesenchymal stem cells growth and proliferation enhancement using PLA vs PCL based nanofibrous scaffolds

Electrospinning of polymers is the most commonly used technique for nanofiber fabrication. polylactic acid (PLA) and polycaprolactone (PCL) have been shown to be ideal for nanofiber preparation in various biomedical applications, due to characteristics such as biodegradablity and their ability to promote the cell growth, similar to native tissues. The aim of this study was to develop biocompatible and biodegradable PLA and PCL-based nanofibrous scaffolds for enhancing stem cell growth and proliferation. The scaffolds were prepared by electrospinning, and their physicochemical properties were studied using Fourier Transform Infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and X-ray diffraction (XRD). The surface morphology of the developed scaffolds was determined using scanning electron microscopy (SEM). Mesenchymal stem cells (MSCs), derived from both adipose tissue and bone marrow, were seeded onto the prepared nanofibrous scaffolds. The effect of scaffold type, and structural characteristics on survival and proliferation of MSCs were evaluated. Our results show that after full physicochemical characterization of PCL and PLA nanofibrous scaffolds both were safe and non-toxic to the evaluated cells and both scaffolds supported cell attachment and proliferation of bone marrow and adipose tissue-derived MSCs.

Cell surface engineering to control cellular interactions

Cell surface composition determines all interactions of the cell with is environment, thus cell functions such as adhesion, migration and cell-cell interactions are likely to be controlled by engineering and manipulating cell membrane. Cell membranes present a rich repertoire of molecules, therefore a versatile ground for modification. However the complex and dynamic nature of the cell surface is also a major challenge for cell surface engineering that should also involve strategies compatible with cell viability. Cell surface engineering by selective chemical reactions or by the introduction of exogenous targeting ligands can be powerful tools for engineering novel interactions and control cell function. In addition to chemical conjugation and modification of functional groups, ligands of interest to modify the surface of cells include recombinant proteins, liposomes or nanoparticles. Here, we review recent efforts to perform changes to cell surface composition. We focus on the engineering of the cell surface with biological, chemical or physical methods to modulate cell functions and control cell-cell and cell-microenvironment interactions. Potential applications of cell surface engineering are also stated.