Thiolated silicone oil: synthesis, gelling and mucoadhesive properties

pH-responsive in situ gelling properties of thiolated citrus high-methoxyl pectin and its potential gel mechanism

pH-responsive in situ gelling properties of thiolated citrus high-methoxyl pectin (TCHMP) were investigated in this study. The gelation capacity results revealed that the in situ gelation behavior of TCHMP only occurred when the pH value was higher than 6.25. The gel strength increased from 26.63 g to 42.77 g as the pH value increased from 7.4 to 8.9. Rheological measurements confirmed that the apparent viscosity and viscoelasticity of TCHMP were highly dependent on pH value and dialysis time. Compared with the control group, the apparent viscosity of TCHMP dialyzed in phosphate-buffered saline (PBS) of pH 8.9 for 180 min increased 695-fold. During the dialysis process of TCHMP at different pH values (7.4-8.9), the final thiol groups content decreased and the final disulfide bonds content increased with the increase in pH value. This illustrates that the mechanism of in situ gelation is mainly the oxidation of thiol-thiol groups to form disulfide bonds. These results can put forward new insights into the pH-responsive in situ gelling properties of TCHMP and provide a theoretical basis for the application of TCHMP in neutral and alkaline gel systems.

Functionalized Mesoporous Silica as Doxorubicin Carriers and Cytotoxicity Boosters

Mesoporous silica nanoparticles (MSNs) bearing methyl, thiol or glucose groups were synthesized, and their encapsulation and release behaviors for the anticancer drug Doxorubicin (Dox) were investigated in comparison with nonporous homologous materials. The chemical modification of thiol-functional silica with a double bond glucoside was completed for the first time, by green thiol-ene photoaddition. The MSNs were characterized in terms of structure (FT-IR, Raman), morphology (TEM), porosity (nitrogen sorption–desorption) and Zeta potential measurements. The physical interactions responsible for the Dox encapsulation were investigated by analytic methods and MD simulations, and were correlated with the high loading efficiency of MSNs with thiol and glucose groups. High release at pH 5 was observed in most cases, with thiol-MSN exhibiting 98.25% cumulative release in sustained profile. At pH 7.4, the glucose-MSN showed 75.4% cumulative release, while the methyl-MSN exhibited a sustained release trend. The in vitro cytotoxicity was evaluated on NDHF, MeWo and HeLa cell lines by CellTiter-Glo assay, revealing strong cytotoxic effects in all of the loaded silica at low equivalent Dox concentration and selectivity for cancer cells. Atypical applications of each MSN as intravaginal, topical or oral Dox administration route could be proposed.

Thiolated Silicone Oils as New Components of Protective Creams in the Prevention of Skin Diseases

This work investigates the possibility of using thiolated silicone oils as new components in protective creams and their impact on the efficacy of these products. Thiolated silicone oils were synthesized by amide bond formation between primary amino groups of poly17dimethylsiloxane-co-(3-aminopropyl)-methylsiloxane] and carboxylic groups of thiol ligand (3-mercaptopropionic acid) with carbodiimide as a coupling agent. To evaluate and compare the properties of these kinds of thiomers, three different emulsion o/w types were obtained. Emulsion E1 contained methyl silicone oil, E2 poly[dimethylsiloxane-co-(3-aminopropyl)-methylsiloxane], and E3 thiolated silicone oil (silicone-MPA), respectively. Physicochemical properties, including pH, conductivity, droplet size distribution, viscosity, and stability, were assessed. The efficacy of barrier creams in the prevention of occupational skin diseases depends on their mechanical and rheological properties. Thus, the method which imitates the spreadability conditions on the skin and how structure reconstruction takes places was performed. We also investigated textural profile, bioadhesion, protection against water and detergents, and water vapor permeability. Emulsion E3 was characterized by beneficial occlusion, spreadability, and adhesion properties. These features with prolonged residence time on the skin can make designed barrier creams more preferable for consumers.

Thiol- and Disulfide-Based Stimulus-Responsive Soft Materials and Self-Assembling Systems

Properties and applications of synthetic thiol- and disulfide-based materials, principally polymers, are reviewed. Emphasis is placed on soft and self-assembling materials in which interconversion of the thiol and disulfide groups initiates stimulus-responses and/or self-healing for biomedical and non-biomedical applications.

Imine bond formation as a tool for incorporation of amikacin in self-emulsifying drug delivery systems (SEDDS)

AIM

The aim was to develop a self-emulsifying drug delivery system (SEDDS) for amikacin via imine bond formation with hydrophobic aldehydes.

METHODS

Trans-2, cis-6-nonadienal, trans-cinnamaldehyde, citral and benzaldehyde were conjugated to amikacin at pH 8.5. Based on results of precipitation efficiency, Fourier-transform infrared spectroscopy (FTIR) and NMR analysis, amikacin-trans-cinnamaldehyde conjugates were further characterized regarding log P_{octanol/water} via HPLC. The release of amikacin from the amikacin-trans-cinnamaldehyde conjugates was examined through in vitro incubation with bovine serum albumin (BSA). SEDDS containing the amikacin-trans-cinnamaldehyde conjugates were tested regarding mean droplet size (MDS), polydispersity index (PDI), log D_{SEDDS/release medium} and cell viability.

RESULTS

Trans-cinnamaldehyde formed the most hydrophobic conjugates with amikacin whereas benzaldehyde did not form hydrophobic conjugates at all. Imine bond formation was confirmed by FTIR and NMR analysis. The highest increase in log P was achieved for the amikacin-trans-cinnamaldehyde conjugate in a molar ratio of 1:5, shifting from -8.58 up to 1.59. Incubation of this conjugate with BSA led to the formation of BSA-trans-cinnamaldehyde releasing in turn amikacin. SEDDS based on Capmul MCM, Cremophor EL and propylene glycol containing the conjugate demonstrated a MDS of 61.4 nm and PDI of 0.265. Log D_{SEDDS/release medium} was calculated to be 3.38. Cell viability studies showed very good tolerability of conjugate loaded SEDDS in concentrations of 0.1% - 0.5%.

CONCLUSION

Imine bond formation of amikacin with trans-cinnamaldehyde and the incorporation of the resulting conjugate into SEDDS represents a promising strategy for oral delivery of amikacin.

Thiolated polymers: Bioinspired polymers utilizing one of the most important bridging structures in nature

Thiolated polymers designated "thiomers" are obtained by covalent attachment of thiol functionalities on the polymeric backbone of polymers. In 1998 these polymers were first described as mucoadhesive and in situ gelling compounds forming disulfide bonds with cysteine-rich substructures of mucus glycoproteins and crosslinking through inter- and intrachain disulfide bond formation. In the following, it was shown that thiomers are able to form disulfides with keratins and membrane-associated proteins exhibiting also cysteine-rich substructures. Furthermore, permeation enhancing, enzyme inhibiting and efflux pump inhibiting properties were demonstrated. Because of these capabilities thiomers are promising tools for drug delivery guaranteeing a strongly prolonged residence time as well as sustained release on mucosal membranes. Apart from that, thiomers are used as drugs per se. In particular, for treatment of dry eye syndrome various thiolated polymers are in development and a first product has already reached the market. Within this review an overview about the thiomer-technology and its potential for different applications is provided discussing especially the outcome of studies in non-rodent animal models and that of numerous clinical trials. Moreover, an overview on product developments is given.

The thiolated chitosan: Synthesis, gelling and antibacterial capability

Chitosan-1-(mercaptomethyl)-cyclopropane acetic acid (CS-MCA) copolymer was synthesized by amino linkage. The obtained copolymer was characterized by FTIR, ¹H NMR, XRD, TGA and SEM. Porous and reticulate morphologies were found on the CS-MCA surface. The effects of pH on the rheological properties of CS-MCA were investigated. On the one hand, the apparent viscosity of CS-MCA indicated a shear-thinning behavior. The graft of MCA enhanced the moduli and the maximum elastic properties were observed at pH = 7.00. The addition of dithiothreitol reduced the viscosity and modulus of CS-MCA hydrogel, and the gelation time, temperature and frequency were obtained in dynamic oscillatory tests. The antibacterial effect of CS-MCA against E. coli was investigated for the inhibition zone and bacterial growth curve. These results showed that CS-MCA had better antibacterial ability than chitosan without modification. Therefore, the rheological behavior and functional activities can be applied for the hydrocolloid gels in food and pharmaceutical applications.

Entirely S-Protected Thiolated Silicone: A Novel Hydrophobic Mucoadhesive and Skin Adhesive

The aim of this study was the synthesis and evaluation of an entirely S-protected thiolated silicone as novel hydrophobic mucoadhesive and skin adhesive. 2-[(2-Amino-2-carboxyethyl)disulfanyl]nicotinic acid was covalently attached to a poly(dimethylsiloxane)-graft-polyacrylate via amide bond formation. Adhesive properties were determined via the rotating cylinder method and tensile studies on porcine small intestinal mucosa besides on porcine abdominal skin. Rheological characteristics were evaluated on a cone-plate rheometer. The S-protected thiolated silicone exhibited 128 ± 18 μmol immobilized 2-mercaptonicotinic acid per gram of polymer and showed a 5.9-fold extended time of mucosal adhesion compared with the unmodified silicone on the rotating cylinder. With a 2.3-fold higher maximum detachment force and a 1.7-fold higher total work of adhesion tested on porcine small intestinal mucosa, the S-protected thiolated silicone is superior to the unmodified silicone. Furthermore, using porcine abdominal skin, a 2.4-fold higher maximum detachment force and a 4.4-fold higher total work of adhesion obtained for the S-protected thiolated silicone outlines the preferentially adhesion to skin. Triggered by N-acetyl-L-cysteine liberated thiol groups form interchain and intrachain disulfide bonds within the polymer (6.7% m/v) causing a 23.0-fold increase in dynamic viscosity (ƞ). In parallel, the elastic modulus (G') and the viscous modulus (G") increased 39.2-fold and 8.1-fold, respectively.

Evaluation of modified hyaluronic acid in terms of rheology, enzymatic degradation and mucoadhesion

PURPOSE

This study aimed to investigate the properties of modified hyaluronic acid in terms of rheological properties, enzymatic degradation and mucoadhesiveness.

METHODS

Hyaluronic acid (HA) was chemically modified with sulfhydryl ligand cysteine ethyl ester (C) in order to immobilize sulfhydryl groups on the polymeric backbone. MTT assay was performed to evaluate the safety of hyaluronic acid-cysteine ethyl ester (HAC). Rheological and enzymatic degradation studies were accomplished by preparing hydrogels of HA and HAC, respectively. HA served as control. Enzymes such as lysozyme, amylase and hyaluronidase were chosen to perform degradation studies. To study mucoadhesiveness, hydrogels of HA and HAC, respectively, were mixed with mucus and evaluated by rheology.

RESULTS

MTT assay indicated no toxicity at all. The rheological assay showed 2.2-fold increase in gelling properties in case of HAC in comparison to HA. Furthermore, it could be shown that HAC was degraded by amylase to a lesser extent of 11.5-fold than HA. After 2 h, HA showed a higher degradation by lysozyme with 67.97% than HAC. Adhesion studies exhibited a 2.17-fold higher mucoadhesion of HAC with mucus compared to HA.

CONCLUSION

These results will open the door for high efficient drug delivery systems based on hydrogels for mucosal application.

Synthesis and characterization of thiolated hexanoyl glycol chitosan as a mucoadhesive thermogelling polymer

BACKGROUND

Mucoadhesive polymers, which may increase the contact time between the polymer and the tissue, have been widely investigated for pharmaceutical formulations. In this study, we developed a new polysaccharide-based mucoadhesive polymer with thermogelling properties.

METHODS

Hexanoyl glycol chitosan (HGC), a new thermogelling polymer, was synthesized by the chemical modification of glycol chitosan using hexanoic anhydride. The HGC was further modified to include thiol groups to improve the mucoadhesive property of thermogelling HGC. The degree of thiolation of the thiolated HGCs (SH-HGCs) was controlled in the range of 5-10% by adjusting the feed molar ratio. The structure of the chemically modified polymers was characterized by 1H NMR and ATR-FTIR. The sol-gel transition, mucoadhesiveness, and biocompatibility of the polymers were determined by a tube inverting method, rheological measurements, and in vitro cytotoxicity tests, respectively.

RESULTS

The aqueous solution (4 wt%) of HGC with approximately 33% substitution showed a sol-gel transition temperature of approximately 41 °C. SH-HGCs demonstrated lower sol-gel transition temperatures (34 ± 1 and 31 ± 1 °С) compared to that of HGC due to the introduction of thiol groups. Rheological studies of aqueous mixture solutions of SH-HGCs and mucin showed that SH-HGCs had stronger mucoadhesiveness than HGC due to the interaction between the thiol groups of SH-HGCs and mucin. Additionally, we confirmed that the thermogelling properties might improve the mucoadhesive force of polymers. Several in vitro cytotoxicity tests showed that SH-HGCs showed little toxicity at concentrations of 0.1-1.0 wt%, indicating good biocompatibility of the polymers.

CONCLUSIONS

The resultant thiolated hexanoyl glycol chitosans may play a crucial role in mucoadhesive applications in biomedical areas.

Anhydrous thiomers: Strategy for enhanced mucoadhesion

AIM

The aim of this study was to evaluate the impact of the absence of water during the synthesis of thiolated poly(acrylic acid) (PAA) on its mucoadhesive properties. Previously, thiolation of hydrophilic polymers was performed in aqueous media, where (poly)acrylates undergo a conformational transition to form an entangled network of polymer chains stabilized by neutralization. The impact of chain entanglement, porosity and degree of functionalization of anhydrous precipitated polymers on their mucoadhesive characteristics were therefore evaluated in comparison to the equivalent products synthesized in water and dried by lyophilization.

METHODS

Anhydrous synthesis and purification procedures were designed for the thiolation and entire preactivation of PAA by means of immobilization of l-cysteine (PAA-Cys) and 2-mercaptonicotinic acid (PAA-Cys-MNA), respectively. The obtained conjugates were characterized chemically and for their particle size. Differences in mucoadhesive properties were determined by means of the residence time as well as tensile strength of polymer test disks on porcine small intestinal mucosa.

RESULTS

Anhydrous products revealed a 4.2-fold higher amount of immobilized free thiol moieties for PAA-Cys and a 3.1-fold higher quantity of 2-mercaptonicotinic acid for PAA-Cys-MNA. The impact of particle size of anhydrous products on their mucoadhesive properties was negligible. In comparison to the corresponding aqueous products a 2.5-fold increase in residence time for PAA-Cys and 21.2-fold increase for PAA-Cys-MNA was achieved and in agreement with these results, the improvement in the total work of adhesion was 2.9-fold for PAA-Cys and 5.1-fold for PAA-Cys-MNA.

CONCLUSION

According to these findings, anhydrous synthesis conditions seem to be a promising tool for improved modification rates and moreover enhanced mucoadhesive properties of hydrophilic polymers.

Chitosan-Stabilized Self-Assembled Fluorescent Gold Nanoclusters for Cell Imaging and Biodistribution in Vivo

Biocompatible, near-infrared luminescent gold nanoclusters were synthesized in situ using as-prepared chitosan grafted with N-acetyl-l-cysteine (NAC-CS). The fluorescent gold nanoclusters coated with chitosan-N-acetyl-l-cysteine (AuNCs@NAC-CS) were aggregated by multiple ultrasmall gold nanoclusters closing with each other, with strong fluorescence emission at 680 nm upon excitation at 360 nm. AuNCs@NAC-CS did not display any appreciable cytotoxicity on cells even at a concentration of 1.0 mg mL^-1. AuNCs@NAC-CS were more insensitive to H₂O₂ and trypsin compared with fluorescent gold nanoclusters coated with Albumin Bovine V (AuNCs@BSA), which make them have long time imaging in HeLa cells. Furthermore, the obvious fluorescence signal of AuNCs@NAC-CS appeared in the liver and kidney of the normal mice after 6 h injection. And the fluorescence intensity decreased after that because of the highly efficient clearance characteristics of ultrasmall nanoparticles. These findings demonstrated that AuNCs@NAC-CS possessed good fluorescence, low cytotoxicity, and low sensitivity to some content of cells, allowing imaging of the living cells.

Development, in vitro and in vivo evaluation of a self-emulsifying drug delivery system (SEDDS) for oral enoxaparin administration

AIM

The aim of this study was to develop SEDDS for oral enoxaparin administration and evaluate it in vitro and in vivo.

METHODS

The emulsifying properties of SEDDS composed of long chain lipids (LC-SEDDS), medium chain lipids (MC-SEDDS), short chain lipids (SC-SEDDS) and no lipids (NL-SEDDS) were evaluated. Thereafter, enoxaparin was incorporated via hydrophobic ion pairing in the chosen SEDDS, which were evaluated regarding their mucus permeating properties, stability towards pancreatic lipase, drug release profile and cytotoxicity. Finally, in vivo performance of SEDDS was evaluated.

RESULTS

The average droplet size of chosen LC-SEDDS, MC-SEDDS and NL-SEDDS ranged between 30 and 40nm. MC-SEEDS containing 30% Captex 8000, 30% Capmul MCM, 30% Cremophor EL and 10% propylene glycol and NL-SEDDS containing 31.5% Labrafil 1944, 22.5% Capmul PG-8, 9% propylene glycol, 27% Cremophor EL and 10% DMSO exhibited 2-fold higher mucus diffusion than LC-SEDDS and were therefore chosen for further studies. The enoxaparin-dodecylamine complex (ENOX/DOA) was incorporated in a payload of 2% (w/w) into MC-SEDDS and NL-SEDDS. After 90min 97% of MC-SEDDS and 5% of NL-SEDDS were degraded by pancreatic lipase. Both MC-SEDDS and NL-SEDDS showed sustained in vitro enoxaparin release. Furthermore, orally administrated MC-SEDDS and NL-SEDDS yielded an absolute enoxaparin bioavailability of 2.02% and 2.25%, respectively.

CONCLUSION

According to the abovementioned findings, SEDDS could be considered as a potential oral LMWH delivery system.

Mucus permeating thiolated self-emulsifying drug delivery systems

CONTEXT

Mucus represents a critical obstacle for self-emulsifying drug delivery systems (SEDDS) targeting the epithelial membrane site.

OBJECTIVE

The aim of the study was the development of a novel SEDDS to overcome the mucus barrier.

MATERIALS AND METHODS

Two novel conjugates N-dodecyl-4-mercaptobutanimidamide (thiobutylamidine-dodecylamine, TBA-D) and 2-mercapto-N-octylacetamide (thioglycolicacid-octylamine, TGA-O) were synthesized, incorporated into SEDDS and analyzed for stability, cytotoxicity and physico-chemical characteristics using dynamic light scattering. Mucus interaction studies were performed using in vitro assays based on multiple particle tracking, rotational silicone tubes and rheology.

RESULTS AND DISCUSSION

TBA-D was synthesized using dodecylamine and iminothiolane as thiol precursor (yield=55 ± 5%). TGA-O was obtained via crosslinking of octylamine with SATA ((2,5-dioxopyrrolidin-1-yl) 2-acetylsulfanylacetate) (yield=70 ± 6%). The chemical structure of target compounds was confirmed via NMR analysis. The thiol-conjugates were incorporated in an amount of 3% (m/m) into SEDDS (Cremophor EL 30%, Capmul MCM 30%, Captex 355 30% and propylene glycol 10%), namely thiolated SEDDS leading to a droplet size around 50 nm and zeta potential close to 0 mV. Thiolated SEDDS with an effective diffusion coefficient 〈Deff〉 of up to 0.871 ± 0.122 cm(2) s(-1) × 10(-9) were obtained. Rotational silicone studies show increased permeation of the thiolated SEDDS A in comparison with unthiolated control. Rheological studies confirmed the mucolytic activity of the thiol-conjugates which differed only by 3% from DTT (dithiothreitol) serving as positive control.

CONCLUSION

Low molecular weight thiol-conjugates were identified to improve the mucus permeation, leading to highly efficient mucus permeating SEDDS, which were superior to conventional SEDDS and might thus be a new carrier for lipophilic drug delivery.