Controlling gelation with sequence: Towards programmable peptide hydrogels

Divalent metal ion modulation of a simple peptide-based hydrogel: self-assembly and viscoelastic properties

Peptide self-assembly has been highly studied to understand the pathways in forming higher order structures along with the development and application of resulting hydrogel materials. Driven by noncovalent interactions, peptide hydrogels are stimuli-responsive to any addition to its gelling conditions. Here, a Phe-His based peptide, C14-FH(Trt)-OH, was synthesized and characterized with 1H NMR, FT-IR, MS, UV-vis spectroscopies and elemental analysis. Based on SEM imaging, the dipeptide conjugate was capable of forming a nanofibrous, interconnected network encapsulating buffer to produce a supramolecular hydrogel. Through the addition of Zn2+ and Cu2+, there is a clear change in the self-assembled nanostructures characterized through SEM. With this effect on self-assembly follows a change in the viscoelastic properties of the material, as determined through rheological frequency sweeps, with 2 and 3 orders of magnitude decreases in the elastic modulus G' in the presence of Zn2+ and Cu2+ respectively. This highlights the tunability of soft material properties with peptide design and self-assembly, through metal ions and Nδ-directed coordination.

Self-assembly and hydrogelation of a potential bioactive peptide derived from quinoa proteins

In this work the identification of peptides derived from quinoa proteins which could potentially self-assemble, and form hydrogels was carried out with TANGO, a statistical mechanical based algorithm that predicts β-aggregate propensity of peptides. Peptides with the highest aggregate propensity were subjected to gelling screening experiments from which the most promising bioactive peptide with sequence KIVLDSDDPLFGGF was selected. The self-assembling and hydrogelation properties of the C-terminal amidated peptide (KIVLDSDDPLFGGF-NH2) were studied. The effect of concentration, pH, and temperature on the secondary structure of the peptide were probed by circular dichroism (CD), while its nanostructure was studied by transmission electron microscopy (TEM) and small-angle neutron scattering (SANS). Results revealed the existence of random coil, α-helix, twisted β-sheet, and well-defined β-sheet secondary structures, with a range of nanostructures including elongated fibrils and bundles, whose proportion was dependant on the peptide concentration, pH, or temperature. The self-assembly of the peptide is demonstrated to follow established models of amyloid formation, which describe the unfolded peptide transiting from an α-helix-containing intermediate into β-sheet-rich protofibrils. The self-assembly is promoted at high concentrations, elevated temperatures, and pH values close to the peptide isoelectric point, and presumably mediated by hydrogen bond, hydrophobic and electrostatic interactions, and π-π interactions (from the F residue). At 15 mg/mL and pH 3.5, the peptide self-assembled and formed a self-supporting hydrogel exhibiting viscoelastic behaviour with G' (1 Hz) ~2300 Pa as determined by oscillatory rheology measurements. The study describes a straightforward method to monitor the self-assembly of plant protein derived peptides; further studies are needed to demonstrate the potential application of the formed hydrogels in food and biomedicine.

Data-mining unveils structure-property-activity correlation of viral infectivity enhancing self-assembling peptides

Gene therapy via retroviral vectors holds great promise for treating a variety of serious diseases. It requires the use of additives to boost infectivity. Amyloid-like peptide nanofibers (PNFs) were shown to efficiently enhance retroviral gene transfer. However, the underlying mode of action of these peptides remains largely unknown. Data-mining is an efficient method to systematically study structure-function relationship and unveil patterns in a database. This data-mining study elucidates the multi-scale structure-property-activity relationship of transduction enhancing peptides for retroviral gene transfer. In contrast to previous reports, we find that not the amyloid fibrils themselves, but rather µm-sized β-sheet rich aggregates enhance infectivity. Specifically, microscopic aggregation of β-sheet rich amyloid structures with a hydrophobic surface pattern and positive surface charge are identified as key material properties. We validate the reliability of the amphiphilic sequence pattern and the general applicability of the key properties by rationally creating new active sequences and identifying short amyloidal peptides from various pathogenic and functional origin. Data-mining-even for small datasets-enables the development of new efficient retroviral transduction enhancers and provides important insights into the diverse bioactivity of the functional material class of amyloids.

Mechanism of Amyloid Gel Formation by Several Short Amyloidogenic Peptides

Under certain conditions, many proteins/peptides are capable of self-assembly into various supramolecular formations: fibrils, films, amyloid gels. Such formations can be associated with pathological phenomena, for example, with various neurodegenerative diseases in humans (Alzheimer’s, Parkinson’s and others), or perform various functions in the body, both in humans and in representatives of other domains of life. Recently, more and more data have appeared confirming the ability of many known and, probably, not yet studied proteins/peptides, to self-assemble into quaternary structures. Fibrils, biofilms and amyloid gels are promising objects for the developing field of research of nanobiotechnology. To develop methods for obtaining nanobiomaterials with desired properties, it is necessary to study the mechanism of such structure formation, as well as the influence of various factors on this process. In this work, we present the results of a study of the structure of biogels formed by four 10-membered amyloidogenic peptides: the VDSWNVLVAG peptide (AspNB) and its analogue VESWNVLVAG (GluNB), which are amyloidogenic fragments of the glucantransferase Bgl2p protein from a yeast cell wall, and amyloidogenic peptides Aβ(31–40), Aβ(33–42) from the Aβ(1–42) peptide. Based on the analysis of the data, we propose a possible mechanism for the formation of amyloid gels with these peptides.

Amyloids as Building Blocks for Macroscopic Functional Materials: Designs, Applications and Challenges

Amyloids are self-assembled protein aggregates that take cross-β fibrillar morphology. Although some amyloid proteins are best known for their association with Alzheimer’s and Parkinson’s disease, many other amyloids are found across diverse organisms, from bacteria to humans, and they play vital functional roles. The rigidity, chemical stability, high aspect ratio, and sequence programmability of amyloid fibrils have made them attractive candidates for functional materials with applications in environmental sciences, material engineering, and translational medicines. This review focuses on recent advances in fabricating various types of macroscopic functional amyloid materials. We discuss different design strategies for the fabrication of amyloid hydrogels, high-strength materials, composite materials, responsive materials, extracellular matrix mimics, conductive materials, and catalytic materials.

Oral delivery of self-assembling bioactive peptides to target gastrointestinal tract disease

Peptides are known for their diverse bioactivities including antioxidant, antimicrobial, and anticancer activity, all three of which are potentially useful in treating colon-associated diseases. Beside their capability to stimulate positive health effects once released in the body, peptides are able to form useful nanostructures such as hydrogels. Combining peptide bioactivity and peptide gel-forming potentials can create interesting systems that can be used for oral delivery. This combination, acting as a two-in-one system, has the potential to avoid the need for delicate entrapment of a drug or natural bioactive compound. We here review the context and research progress, to date, in this area.

Aligned Assembly in a 2-D Gel of a Water-Soluble Peptide

We demonstrate the assembly of a compact, gel-like Langmuir-Blodgett film of rods formed by self-assembly of a β-sheet-forming water-soluble peptide, Ac-IKHLSVN-NH₂, at the surface of aqueous electrolytes. We characterize surface pressure hysteresis and demonstrate shear stiffening of the surface caused by area cycling, which we interpret as due to rearrangement and alignment of the rods. We show strong effects of the electrolyte on the assembly of the elementary rods, which can be related to the Hofmeister series and interpreted by effects on the interaction energies mediated by ions and water. Formation of β-sheet structures and assembly of these into surface-segregated semicrystalline gels was strongly promoted by ammonium sulfate electrolyte. With ammonium sulfate electrolyte as subphase for Langmuir-Blodgett film deposition, shear stiffening by surface area cycling resulted in very compact films on transfer to a substrate.

Tuning hydrogel properties with sequence-defined, non-natural peptoid crosslinkers

The native extracellular matrix (ECM) is composed of hierarchically structured biopolymers containing precise monomer sequences and chain shapes to yield bioactivity. Recapitulating this structure in synthetic hydrogels is of particular interest for tissue engineering and in vitro disease models to accurately mimic biological microenvironments. However, despite extensive research on hydrogels, it remains a challenge to recapitulate the hierarchical structure of native ECM with completely synthetic hydrogel platforms. Toward this end, this work presents a synthetic hydrogel system using commercially available poly(ethylene glycol) macromers with sequence-defined poly(N-substituted glycines) (peptoids) as crosslinkers. We demonstrate that bulk hydrogel mechanics, specifically as shear storage modulus, can be controlled by altering peptoid sequence and structure. Notably, the helical peptoid sequence investigated here increases the storage modulus of the resulting hydrogels with increasing helical content and chain length, in a fashion similar to helical peptide-crosslinked hydrogels. In addition, the resulting hydrogels are shown to be hydrolytically and enzymatically stable due to the N-substituted peptidomimetic backbone of the crosslinkers. We further demonstrate the potential utility of these peptoid-crosslinked hydrogels as a viable cell culture platform using seeded human dermal fibroblasts in comparison to peptide-crosslinked hydrogels as a control. Taken together, our system offers a strategy toward ECM mimics that replicate the hierarchy of biological matrices with completely synthetic, sequence-defined molecules.

Low Molecular Weight Supramolecular Hydrogels for Sustained and Localized In Vivo Drug Delivery

Supramolecular hydrogels are emerging as next-generation alternatives to synthetic polymers for drug delivery applications. Self-assembling peptides are a promising class of supramolecular gelator for in vivo drug delivery that have been slow to be adopted despite advantages in biocompatibility due to the relatively high cost of producing synthetic peptide hydrogels compared to synthetic polymer gels. Herein we describe the development and use of inexpensive low molecular weight cationic derivatives of phenylalanine (Phe) as injectable hydrogels for in vivo delivery of an anti-inflammatory drug, diclofenac, for pain mitigation in a mouse model. N-Fluorenylmethoxycarbonyl phenylalanine (Fmoc-Phe) derivatives were modified at the carboxylic acid with diaminopropane (DAP) to provide Fmoc-Phe-DAP molecules that spontaneously and rapidly self-assemble in aqueous solutions upon addition of physiologically relevant sodium chloride concentrations to give hydrogels. When self-assembly occurs in the presence of diclofenac, the drug molecule is efficiently encapsulated within the hydrogel network. These hydrogels exhibit robust shear-thinning behavior, mechanical stability, and drug release profiles to enable application as injectable hydrogels for in vivo drug delivery. Delivery of diclofenac in vivo was demonstrated by a localized injection of an Fmoc-F⁵-Phe-DAP/diclofenac hydrogel into the ankle joint of mice with induced ankle injury and associated inflammation-induced pain. Remediation of pain in the ankle joint was observed immediately after initial injection and was sustained for a period of nearly two weeks while diclofenac controls remediated pain for less than one day. This data demonstrates the promise of these supramolecular hydrogels as inexpensive next-generation materials for sustained and localized drug delivery in vivo.

Hydrogel and Organogel Formation by Hierarchical Self-Assembly of Cyclic Peptides Nanotubes

Breaking away from the linear structure of previously reported peptide-based gelators, this study reports the first example of gel formation based on the use of cyclic peptides made of alternating d- and l-amino acids, known to self-assemble in solution to form long nanotubes. Herein, a library of cyclic peptides was systemically studied for their gelation properties in various solvents, uncovering key parameters driving both organogel and hydrogel formation. The hierarchical nature of the self-assembly process in water was characterised by a combination of electron microscopy imaging and small-angle X-ray scattering, revealing a porous network of entangled nanofibres composed by the aggregation of several cyclic peptide nanotubes. Rheology measurements then confirmed the formation of soft hydrogels.

Phenylalanine and derivatives as versatile low-molecular-weight gelators: design, structure and tailored function

Phenylalanine (Phe) is an essential amino acid classified as neutral and nonpolar due to the hydrophobic nature of the benzyl side chain.

Modulating Supramolecular Peptide Hydrogel Viscoelasticity Using Biomolecular Recognition

Self-assembled peptide-based hydrogels are emerging materials that have been exploited for wound healing, drug delivery, tissue engineering, and other applications. In comparison to synthetic polymer hydrogels, supramolecular peptide-based gels have advantages in biocompatibility, biodegradability, and ease of synthesis and modification. Modification of the emergent viscoelasticity of peptide hydrogels in a stimulus responsive fashion is a longstanding goal in the development of next-generation materials. In an effort to selectively modulate hydrogel viscoelasticity, we report herein a method to enhance the elasticity of β-sheet peptide hydrogels using specific molecular recognition events between functionalized hydrogel fibrils and biomolecules. Two distinct biomolecular recognition strategies are demonstrated: oligonucleotide Watson-Crick duplex formation between peptide nucleic acid (PNA) modified fibrils with a bridging oligonucleotide and protein-ligand recognition between mannose modified fibrils with concanavalin A. These methods to modulate hydrogel elasticity should be broadly adaptable in the context of these materials to a wide variety of molecular recognition partners.

Calcitonin-Loaded Thermosensitive Hydrogel for Long-Term Antiosteopenia Therapy

Effective antiosteopenia therapy can be achieved by designing long-term protein/peptide drug delivery systems for bone trabecula restoration. Here we show that a complex of salmon calcitonin and oxidized calcium alginate (sCT-OCA) was prepared and loaded into a thermosensitive copolymer hydrogel for long-term antiosteopenia treatment. The triblock copolymer, poly(d,l-lactic acid-co-glycolic acid)-b-poly(ethylene glycol)-b-poly(d,l-lactic acid-co-glycolic acid) (PLGA-PEG-PLGA) exhibited sol-gel transition at body temperature. The sustained release of sCT from the in situ gelling system was determined by both the degradation of the hydrogel and the decomposition of the sCT-OCA complex. This system showed sustained effects in reducing serum calcium and bone trabecula reconstruction in the treatment of glucocorticoid-induced osteopenia in rats for approximately 30 days after a single subcutaneous injection, which may shed light on antiosteopenia therapy in the future.

MALDI-imaging enables direct observation of kinetic and thermodynamic products of mixed peptide fiber assembly

The first use of MALDI-imaging, as a snapshot tool to characterize multicomponent self-assembling peptide fibers.