Anionic glycosylated polysulfone membranes for the affinity adsorption of low-density lipoprotein via click reactions

Facile Preparation of β-Cyclodextrin-Modified Polysulfone Membrane for Low-Density Lipoprotein Adsorption via Dopamine Self-Assembly and Schiff Base Reaction

A facile method for the immobilization of β-cyclodextrin on polysulfone membranes with the aim of selectively adsorbing low-density lipoprotein (LDL) was established, which is based on the self-assembly of dopamine on the membrane followed by the Schiff base reaction with mono-(6-ethanediamine-6-deoxy)-β-cyclodextrin. The surface modification processes were validated using X-ray photoelectron spectroscopy and attenuated total reflectance Fourier-transform infrared spectroscopy. Surface wettability and surface charge of the membranes were investigated through the water contact angle and zeta potential analysis. The cyclodextrin-modified polysulfone membrane (PSF-CD) showed good resistance to protein solutions, as shown by the measurement of BSA adsorption. The assessment of BSA adsorption revealed that the cyclodextrin-modified polysulfone membrane (PSF-CD) exhibited excellent resistance to protein solutions. To investigate the adsorption and desorption behaviors of the membranes in single-protein or binary-protein solutions, an enzyme-linked immunosorbent assay was employed. The results revealed that the PSF-CD possessed remarkable adsorption capacity and higher affinity for LDL in both single-protein and binary-protein solutions, rendering it a suitable material for LDL apheresis.

Albumin Nanoparticles Surface Decorated with a Tumor-Homing Peptide Help in Selective Killing of Triple-Negative Breast Cancer Cells

In this article, we describe a method of delivery of doxorubicin using a novel tumor-homing peptide-based albumin nanoparticle system to triple-negative breast cancer cells (TNBC). The absence and reduced expression of the hormone (estrogen, progesterone) and HER2 (human epidermal growth factor 2) receptors, respectively, render TNBC patients nonsusceptible to different available targeted therapies. These peptide-modified nanoparticles could be taken up by TNBC cells more effectively than their bare counterparts. The drug-loaded peptide-modified nanoparticles achieved an optimal but crucial balance between cell killing in cancerous cells and cell survival in the noncancerous ones. This appears to be because of different routes of entry and subsequent fate of the bare and peptide-modified nanoparticles in cancerous and noncancerous cells. In a TNBC mouse model, the peptide-modified system fared better than the free drug in mounting an antitumor response while not being toxic systemically.

Fabrication and Study of Dextran/Sulfonated Polysulfone Blend Membranes for Low-Density Lipoprotein Adsorption

The abnormal increase in low-density lipoprotein (LDL) in human blood is a main independent risk factor for the pathogenesis of atherosclerosis, whereas a reduced LDL level effectively lowers morbidity. It is important to develop LDL adsorption materials with high efficiency and selectivity, as well as to simplify their fabrication processes. In this paper, polysulfone (PSF), sulfonated polysulfone (SPSF), and sulfonated polysulfone/dextran (SPSF/GLU) membranes were successfully fabricated for LDL adsorption using a solution casting technique. Attenuated total reflectance Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy measurements confirmed the success of the preparation. The water contact angle decreased from 89.7 ± 3.4° (PSF) to 76.4 ± 3.2° (SPSF) and to 71.2 ± 1.9° (SPSF/GLU), respectively. BSA adsorption testing showed that the SPSF/GLU with surface enrichment of sulfonate groups and glycosyl groups possessed higher resistance to protein solution. The adsorption and desorption behaviors of the studied samples in single-protein or binary-protein solutions were systematically investigated by enzyme-linked immunosorbent assay (ELISA), The results showed that SPSF/GLU, which had excellent resistance to protein adsorption, possessed a similar adsorption capacity to that of PSF. SPSF membrane exhibited excellent selective affinity for LDL in single and binary protein solutions, suggesting potential applications in LDL removal.

Bio-inspired dual-functional phospholipid-poly(acrylic acid) brushes grafted porous poly(vinyl alcohol) beads for selective adsorption of low-density lipoprotein

Elevated levels of low-density lipoproteins (LDL) are recognized as a crucial indicator of hyperlipidemia (HLP) and lowering of LDL levels represents an effective clinical treatment strategy. Inspired by the conjugation of phospholipid monolayers and the lipid content of the LDL particle, the current study describes the preparation of an innovative hemoperfusion adsorbent. The adsorbent was prepared by attachment of phosphatidyl ethanolamine to poly(acrylic acid) modified poly(vinyl alcohol-co-triallyl isocyanurate) beads (PVA@PAA-PE). The interaction between LDL and adsorbent mimics the lipoprotein microemulsion present in the blood and thus promotes efficient binding with high affinity. In vitro adsorption using serum from patients with HLP revealed that the LDL adsorption of PVA@PAA-PE was 4.44 times higher than that of controls and the removal rate of LDL using PVA@PAA-PE was about twice as high as that of the anti-atherogenic high-density lipoprotein (HDL). In vivo whole blood perfusion demonstrated the superior affinity of PVA@PAA-PE for LDL since LDL concentration was significantly reduced from 10.71 ± 2.36 mmol L^-1 to 6.21 ± 1.45 mmol L^-1, while the HDL level was not severely reduced (from 0.98 ± 0.12 mmol L^-1 to 0.56 ± 0.15 mmol L^-1). Additionally, PVA@PAA-PE exhibited excellent hemocompatibility and low cytotoxicity. Therefore, PVA@PAA-PE is a potential adsorbent for whole blood perfusion to treat hyperlipidemia.

Polymer Membrane with Glycosylated Surface by a Chemo-Enzymatic Strategy for Protein Affinity Adsorption

Membranes with glycosylated surfaces are naturally biomimetic and not only have excellent surface hydrophilicity and biocompatibility, but have a specific recognition to target biomacromolecules due to the unique chemo-biological properties of their surface carbohydrates; however, they cannot be easily chemically produced on large scales due to the complex preparation process. This manuscript describes the fabrication of a polypropylene membrane with a glycosylated surface by a chemo-enzymatic strategy. First, hydroxyl (OH) groups were introduced onto the surface of microporous polypropylene membrane (MPPM) by UV-induced grafting polymerization of oligo(ethylene glycol) methacrylate (OEGMA). Then, glycosylation of the OH groups with galactose moieties was achieved via an enzymatic transglycosylation by β-galactosidase (Gal) recombinanted from E. coli. The fabricated glycosylated membrane showed surprisingly specific affinity adsorption to lectin ricinus communis agglutinin (RCA120). The chemo-enzymatic route is easy and green, and it would be expected to have wide applications for large-scale preparation of polymer membranes with glycosylated surfaces.

Chondroitin-analogue decorated magnetic nanoparticles via a click reaction for selective adsorption of low-density lipoprotein

Chondroitin-analogue polymers are synthesized to anchor on Fe₃O₄ nanoparticle surfaces to achieve efficient, selective and reusable adsorption of low-density lipoprotein.

Improvement on the extraction efficiency of low density lipoprotein in an ionic liquid microemulsion

A novel microemulsion is developed at room temperature with 30 µL of sodium alginate sulfate (SAS, 0.02 mol/L), 0.005 g bis (2-ethylhexyl) succinate sulfonate (AOT) and 270 µL of 1-butyl-3-methylimidazolium hexafluorophosphate (BmimPF₆) ionic liquid as aqueous phase, surfactant and IL phase, respectively. The SAS/AOT/BmimPF₆ microemulsion significantly improves the extraction efficiency for low density lipoprotein (LDL). 96% LDL in a 300 µL of PBS is selectively extracted into a same volume of microemulsion, with respect to those of 67%, 76% and 85% by BmimPF₆, H₂O/AOT/BmimPF₆ microemulsion and sodium alginate (SA)/AOT/BmimPF₆ microemulsion. LDL in the SAS/AOT/BmimPF₆ microemulsion is distributed both in BmimPF₆ via hydrophobic interaction and in the "pools" of the microemulsion via electrostatic interaction with AOT and specific interaction between LDL with SAS. 83% of LDL in the microemulsion can be readily back extracted into an aqueous phase with 0.8% (m/v) of sodium dodecyl sulfate (SDS) as stripping reagent. For practical applications, LDL in human serum is selectively extracted with the microemulsion, as demonstrated by enzyme linked immunosorbent assay (ELISA) and sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE).

A mussel-inspired approach towards heparin-immobilized cellulose gel beads for selective removal of low density lipoprotein from whole blood

In this study, we report a mussel-inspired approach to fabricate heparin-immobilized cellulose (HeTaCe) gel beads with self-anticoagulative and biocompatible properties which can selectively remove low density lipoprotein (LDL) from whole blood directly. First, a phase inversion technique was applied to prepare cellulose gel beads. Then the as-prepared gel beads were dipped into a mixed solution of heparin and tannic acid in phosphate buffered saline (PBS, pH 8.5) to obtain HeTaCe gel beads. Blood compatibility experiments indicated that the HeTaCe gel beads could suppress complement activation as well as contact activation and prolong the clotting times to the upper detect limits (activated partial thromboplastin time >600 s and thrombin time >180 s) of the automated blood coagulation analyzer. An ideal adsorption capacity of LDL in vitro was achieved by the HeTaCe gel beads with an amount of 79.1 mg/g. Besides, dynamic column adsorption test further demonstrated a selective adsorption of LDL without a significant reduction of high density lipoprotein (HDL) in a simulative hemoperfusion system. It is believed that the HeTaCe gel beads will be quite appealing to future clinical practice aiming at lowering LDL and improving the outcomes of patients with high cardiovascular risk.

Selective and Regenerable Surface Based on β-Cyclodextrin for Low-Density Lipoprotein Adsorption

Cyclodextrins (CDs) are a family of cyclic oligosaccharides, whose unique hydrophilic outer surface and lipophilic central cavity facilitate the formation of inclusion complexes with various biomolecules, such as cholesterol and phospholipids, via multi-interactions. Low-density lipoprotein (LDL) is the main carrier of cholesterol in bloodstream and is associated with the progression of atherosclerosis. The surface of LDL is composed of a shell of phospholipids monolayer containing most of the free unesterified cholesterol as well as the single copy of apolipoprotein B-100. To date, various LDL adsorbents have been fabricated to interact with the biomolecules on LDL surface. Owing to its elegant structure, CD is considered to be a promising choice for preparation of more economical and effective LDL-adsorbing materials. Therefore, in this study, interaction between β-CD and LDL in solution was investigated by dynamic light scattering, circular dichroism, and ultraviolet spectroscopy. Further, a supramolecular surface based on β-CD was simply prepared by self-assembled monolayer on gold surface. The effect of hydrogen bond and the cavity of β-CD on the interaction between β-CD and LDL was particularly explored by surface plasmon resonance (SPR) analysis. The SPR results showed that such β-CD-modified surface exhibited good selectivity and could be largely regenerated by sodium dodecyl sulfate wash. This study may extend the understanding of the interaction between LDL and LDL adsorbent or the design and development of more efficient and lower-cost LDL adsorbents in the future.

Effect of bilayer charge on lipoprotein lipid exchange

Lipoproteins play a key role in the onset and development of atherosclerosis, the formation of lipid plaques at blood vessel walls. The plaque formation, as well as subsequent calcification, involves not only endothelial cells but also connective tissue, and is closely related to a wide range of cardiovascular syndromes, that together constitute the number one cause of death in the Western World. High (HDL) and low (LDL) density lipoproteins are of particular interest in relation to atherosclerosis, due to their protective and harmful effects, respectively. In an effort to elucidate the molecular mechanisms underlying this, and to identify factors determining lipid deposition and exchange at lipid membranes, we here employ neutron reflection (NR) and quartz crystal microbalance with dissipation (QCM-D) to study the effect of membrane charge on lipoprotein deposition and lipid exchange. Dimyristoylphosphatidylcholine (DMPC) bilayers containing varying amounts of negatively charged dimyristoylphosphatidylserine (DMPS) were used to vary membrane charge. It was found that the amount of hydrogenous material deposited from either HDL or LDL to the bilayer depends only weakly on membrane charge density. In contrast, increasing membrane charge resulted in an increase in the amount of lipids removed from the supported lipid bilayer, an effect particularly pronounced for LDL. The latter effects are in line with previously reported observations on atherosclerotic plaque prone regions of long-term hyperlipidaemia and type 2 diabetic patients, and may also provide some molecular clues into the relation between oxidative stress and atherosclerosis.