Direct cell-cell communication with three-dimensional cell morphology on wrinkled microposts

Surface Deformation of Biocompatible Materials: Recent Advances in Biological Applications

The surface topography of substrates is a crucial factor that determines the interaction with biological materials in bioengineering research. Therefore, it is important to appropriately modify the surface topography according to the research purpose. Surface topography can be fabricated in various forms, such as wrinkles, creases, and ridges using surface deformation techniques, which can contribute to the performance enhancement of cell chips, organ chips, and biosensors. This review provides a comprehensive overview of the characteristics of soft, hard, and hybrid substrates used in the bioengineering field and the surface deformation techniques applied to the substrates. Furthermore, this review summarizes the cases of cell-based research and other applications, such as biosensor research, that utilize surface deformation techniques. In cell-based research, various studies have reported optimized cell behavior and differentiation through surface deformation, while, in the biosensor and biofilm fields, performance improvement cases due to surface deformation have been reported. Through these studies, we confirm the contribution of surface deformation techniques to the advancement of the bioengineering field. In the future, it is expected that the application of surface deformation techniques to the real-time interaction analysis between biological materials and dynamically deformable substrates will increase the utilization and importance of these techniques in various fields, including cell research and biosensors.

In Situ Investigation of Intercellular Signal Transduction Based on Detection of Extracellular pH and ROS by Scanning Electrochemical Microscopy

Intercellular signal transduction plays an important role in the regulation of biological activities. Herein, a Transwell chamber-based two-layer device combined with scanning electrochemical microscopy (SECM) technology has been proposed for in situ investigation of intercellular signal transduction. The cells in the device were cultured on two layers: the lower layer was for signaling cells, and the upper layer was for signal-receiving cells. The extracellular pH (pHe) and ROS (reactive oxygen species, ROSe) were in situ monitored by SECM potentiometric mode and SECM-MPSW (multipotential step waveform), respectively. When the signaling cells, including MCF-7, HeLa, and HFF cells, were electrically stimulated, the ROS release of the signal-receiving cells was promoted. By detecting the pH at the cell surface, it was found that more H⁺ generated by the signaling cells and two cell layers at a shorter distance could both cause the signal-receiving cells to release more ROS, revealing that H⁺ is one of the signaling molecules of intercellular communication. This SECM-based in situ monitoring strategy provides an effective way to investigate intercellular signal transduction and explore the corresponding mechanism.

Osteoclast formation from mouse bone marrow cells on micro/nano-scale patterned surfaces

OBJECTIVES

Osteoclasts can sense the surface topography of materials. However, it is difficult to identify the structural factors that affect osteoclast formation and its function. Furthermore, we hypothesized that the type of osteoclast precursor cells also affects osteoclastogenesis in the materials. In this study, we investigated the effects of defined micro/nanoscale patterns on osteoclastogenesis from bone marrow cells (BMCs).

METHODS

Various cyclo-olefin polymer (COP) patterns were prepared using nanoimprinting. The effects of shape, size, and height of the patterns, and the wettability of the patterned surfaces on osteoclastogenesis from BMCs were evaluated in vitro.

RESULTS

Osteoclast formation was promoted on pillars (diameter, 1 μm or 500 nm; height, 500 nm). Notably, osteoclastogenesis from BMCs was better promoted on hydrophobic pillars than on hydrophilic pillars. In contrast, decreased osteoclast formation was observed on the nanopillars (diameter, 100 nm; height, 200 nm).

CONCLUSIONS

We demonstrated the promotion of osteoclast formation from BMCs on hydrophobic pillars with diameters of 1 μm and 500 nm. Some cellular behaviors in the patterns were dependent on the type of osteoclast precursor cells. The designed patterns are useful for designing the surface of dental implants or bone replacement materials with a controllable balance between osteoblast and osteoclast activities.

A microfluidic approach for studying microcolonization of Escherichia coli O157:H7 on leaf trichome-mimicking surfaces under fluid shear stress

Escherichia coli O157:H7 have previously been associated with disease outbreaks associated with leafy green vegetables. However, the physical mechanisms that determine the spatial organization of bacteria onto leafy greens are still not clear. Microfluidics with embedded trichome-mimicking microposts were employed to investigate the role of shear flow and configuration of trichomes on E. coli O157:H7 microcolonization. We characterized the three-dimensional microcolonization of green fluorescent protein (GFP)-tagged E. coli O157:H7 using multiphoton fluorescence microscopy and compared their differences under static (no flow; incubated for 36 h at 37°C) and fluid shear conditions (750 nl/min for 36 h at 37°C). For micropatterned trichome arrays, we demonstrated that natural wax-mixed polydimethylsiloxane retains similar topographies and contact angles to the surface of trichome-bearing leafy greens. Our results showed that E. coli O157:H7 under fluid shear stress aligned their colonization parallel to the direction of flow. In a static condition, their colonization had no preferential alignment, with statistically similar angular distributions in all directions. In addition, depending on dimensions of the trichome arrays and flow conditions, different bacterial microcolonization patterns grew radially from initial attachment; they formed into filamentous structures and developed into bridges by surface hydrophobicity and flow-induced shear with a nutrient-rich medium. Collectively, these results demonstrate how the consequences of bacterial colonization in response to shear flow can affect pathogenic bacterial contamination of leafy greens and biofilm architectures.

Plasmon-Free Polymeric Nanowrinkled Substrates for Surface-Enhanced Raman Spectroscopy of Two-Dimensional Materials

We report plasmon-free polymeric nanowrinkled substrates for surface-enhanced Raman spectroscopy (SERS). Our simple, rapid, and cost-effective fabrication method involves depositing a poly(ethylene glycol)diacrylate (PEGDA) prepolymer solution droplet on a fully polymerized, flat PEGDA substrate, followed by drying the droplet at room conditions and plasma treatment, which polymerizes the deposited layer. The thin polymer layer buckles under axial stress during plasma treatment due to its different mechanical properties from the underlying soft substrate, creating hierarchical wrinkled patterns. We demonstrate the variation of the wrinkling wavelength with the drying polymer molecular weight and concentration (direct relations are observed). A transition between micron to nanosized wrinkles is observed at 5 v % concentration of the lower molecular-weight polymer solution (PEGDA M_n 250). The wrinkled substrates are observed to be reproducible, stable (at room conditions), and, especially, homogeneous at and below the transition regime, where nanowrinkles dominate, making them suitable candidates for SERS. As a proof-of-concept, the enhanced SERS performance of micro/nanowrinkled surfaces in detecting graphene and hexagonal boron nitride (h-BN) is illustrated. Compared to the SiO₂/Si surfaces, the wrinkled PEGDA substrates significantly enhanced the signature Raman band intensities of graphene and h-BN by a factor of 8 and 50, respectively.

High-Aspect-Ratio Nanostructured Surfaces as Biological Metamaterials

Materials patterned with high-aspect-ratio nanostructures have features on similar length scales to cellular components. These surfaces are an extreme topography on the cellular level and have become useful tools for perturbing and sensing the cellular environment. Motivation comes from the ability of high-aspect-ratio nanostructures to deliver cargoes into cells and tissues, access the intracellular environment, and control cell behavior. These structures directly perturb cells' ability to sense and respond to external forces, influencing cell fate, and enabling new mechanistic studies. Through careful design of their nanoscale structure, these systems act as biological metamaterials, eliciting unusual biological responses. While predominantly used to interface eukaryotic cells, there is growing interest in nonanimal and prokaryotic cell interfacing. Both experimental and theoretical studies have attempted to develop a mechanistic understanding for the observed behaviors, predominantly focusing on the cell-nanostructure interface. This review considers how high-aspect-ratio nanostructured surfaces are used to both stimulate and sense biological systems.