The blood compatibility challenge. Part 4: Surface modification for hemocompatible materials: Passive and active approaches to guide blood-material interactions

Surface modification of neurovascular stents: from bench to patient

Flow-diverting stents (FDs) for the treatment of cerebrovascular aneurysms are revolutionary. However, these devices require systemic dual antiplatelet therapy (DAPT) to reduce thromboembolic complications. Given the risk of ischemic complications as well as morbidity and contraindications associated with DAPT, demonstrating safety and efficacy for FDs either without DAPT or reducing the duration of DAPT is a priority. The former may be achieved by surface modifications that decrease device thrombogenicity, and the latter by using coatings that expedite endothelial growth. Biomimetics, commonly achieved by grafting hydrophilic and non-interacting polymers to surfaces, can mask the device surface with nature-derived coatings from circulating factors that normally activate coagulation and inflammation. One strategy is to mimic the surfaces of innocuous circulatory system components. Phosphorylcholine and glycan coatings are naturally inspired and present on the surface of all eukaryotic cell membranes. Another strategy involves linking synthetic biocompatible polymer brushes to the surface of a device that disrupts normal interaction with circulating proteins and cells. Finally, drug immobilization can also impart antithrombotic effects that counteract normal foreign body reactions in the circulatory system without systemic effects. Heparin coatings have been explored since the 1960s and used on a variety of blood contacting surfaces. This concept is now being explored for neurovascular devices. Coatings that improve endothelialization are not as clinically mature as anti-thrombogenic coatings. Coronary stents have used an anti-CD34 antibody coating to capture circulating endothelial progenitor cells on the surface, potentially accelerating endothelial integration. Similarly, coatings with CD31 analogs are being explored for neurovascular implants.

Syndecan-4 Functionalization Reduces the Thrombogenicity of Engineered Vascular Biomaterials

Blood-biomaterial compatibility is essential for tissue repair especially for endovascular biomaterials where small-diameter vessel patency and endothelium formation is crucial. To address this issue, a composite biomaterial termed PFC fabricated from poly (glycerol sebacate), silk fibroin, and collagen was used to determine if functionalization with syndecan-4 (SYN4) would reduce thrombogenesis through the action of heparan sulfate. The material termed, PFC_SYN4, has structure and composition similar to native arterial tissue and has been reported to facilitate the binding and differentiation of endothelial colony-forming cells (ECFCs). In this study, the hemocompatibility of PFC_SYN4 was evaluated and compared with non-functionalized PFC, electrospun collagen, ePTFE, and bovine pericardial patch (BPV). Ultrastructurally, platelets were less activated when cultured on PFC and PFC_SYN4 compared to collagen where extensive platelet degranulation was observed. Quantitatively, 31% and 44% fewer platelets adhered to PFC_SYN4 compared to non-functionalized PFC and collagen, respectively. Functionalization of PFC resulted in reduced levels of complement activation compared to PFC, collagen, and BPV. Whole blood clotting times indicated that PFC_SYN4 was less thrombogenic compared with PFC, collagen, and BPV. These results suggest that syndecan-4 functionalization of blood-contacting biomaterials provides a novel solution for generating a reduced thrombogenic surface.

Early-Stage Protein Adsorption Sequence on Blood-Contacting Surfaces: Answer to Vroman's Question

Plasma protein adsorption on blood-contacting surfaces is the initiating significant event and modulates the subsequent coagulation response. Despite decades of research in this area, Vroman's questions in 1986 "Who gets there first?" and "When does the next protein arrive?" remain unanswered due to the lack of detection techniques with sufficient temporal resolution. In this work, we develop a droplet microfluidic technology to detect protein adsorption sequences on six typical blood-contacting surfaces in milliseconds. Apolipoproteins (Apo) are found to be the first proteins to adsorb onto the surfaces in a plasma droplet, and the specific type of apolipoprotein depends on the surface. Apo CI is the first protein adsorbed on gold, platinum, graphene, stainless steel, and polyvinyl chloride with the adsorption time varying from 0.01 to 1 s, while Apo CIII preferentially reaches the titanium alloy surface within 1 s. Subsequent to the initial adsorption, Apo AI, AII, and other proteins continue to adsorb until albumin arrives. Thus, the adsorption sequence is revealed, and Vroman's questions are answered. Moreover, this finding demonstrates the influence of the initial protein adsorption on subsequent coagulation at the surface, and it offers new insights into the development of anticoagulant surfaces.

Enhancing thromboresistance of neurovascular nickel-titanium devices with responsive heparin hydrogel coatings

BACKGROUND

Neurointerventional devices, particularly laser-cut thin-strut stents made of self-expanding nickel-titanium alloy, are increasingly utilized for endovascular applications in intracranial arteries and dural venous sinuses. Preventing thrombosis and stroke necessitates systemic anticoagulant and antiplatelet therapies with the risk of bleeding complications. Antithrombotic coatings present a promising solution.

METHODS

In this study, we investigated the potential of hydrogels composed of four-armed poly(ethylene glycol) (starPEG) and heparin, with or without coagulation-responsive heparin release, as coatings for neurovascular devices to mitigate blood clot formation. We evaluated the feasibility and efficacy of these coatings on neurovascular devices through in vitro Chandler-Loop assays and implantation experiments in the supra-aortic arteries of rabbits.

RESULTS

Stable and coagulation-responsive starPEG-heparin hydrogel coatings exhibited antithrombotic efficacy in vitro, although with a slightly reduced thromboprotection observed in vivo. Furthermore, the hydrogel coatings demonstrated robustness against shear forces encountered during deployment and elicited only marginal humoral and cellular inflammatory responses compared with the reference standards.

CONCLUSION

Heparin hydrogel coatings offer promising benefits for enhancing the hemocompatibility of neurointerventional devices made of self-expanding nickel-titanium alloy. The variance in performance between in vitro and in vivo settings may be attributed to differences in low- and high-shear blood flow conditions inherent to these models. These models may represent the differences in venous and arterial systems. Further optimization is warranted to tailor the hydrogel coatings for improved efficacy in arterial applications.

Protein adsorption on blood-contacting surfaces: A thermodynamic perspective to guide the design of antithrombogenic polymer coatings

Blood-contacting medical devices often succumb to thrombosis, limiting their durability and safety in clinical applications. Thrombosis is fundamentally initiated by the nonspecific adsorption of proteins to the material surface, which is strongly governed by thermodynamic factors established by the nature of the interaction between the material surface, surrounding water molecules, and the protein itself. Along these lines, different surface materials (such as polymeric, metallic, ceramic, or composite) induce different entropic and enthalpic changes at the surface-protein interface, with material wettability significantly impacting this behavior. Consequently, protein adsorption on medical devices can be modulated by altering their wettability and surface energy. A plethora of polymeric coating modifications have been utilized for this purpose; hydrophobic modifications may promote or inhibit protein adsorption determined by van der Waals forces, while hydrophilic materials achieve this by mainly relying on hydrogen bonding, or unbalanced/balanced electrostatic interactions. This review offers a cohesive understanding of the thermodynamics governing these phenomena, to specifically aid in the design and selection of hemocompatible polymeric coatings for biomedical applications. STATEMENT OF SIGNIFICANCE: Blood-contacting medical devices often succumb to thrombosis, limiting their durability and safety in clinical applications. A plethora of polymeric coating modifications have been utilized for addressing this issue. This review offers a cohesive understanding of the thermodynamics governing these phenomena, to specifically aid in the design and selection of hemocompatible polymeric coatings for biomedical applications.

Porous Microspheres as Pathogen Traps for Sepsis Therapy: Capturing Active Pathogens and Alleviating Inflammatory Reactions

Sepsis is a systemic inflammatory response syndrome caused by pathogen infection, while the current antibiotics mainly utilized in clinical practice to combat infection result in the release of pathogen-associated molecular patterns (PAMPs) in the body. Herein, we provide an innovative strategy for controlling sepsis, namely, capturing active pathogens by means of extracorporeal blood purification. Carbon nanotubes (CNTs) were modified with dimethyldiallylammonium chloride (DDA) through γ-ray irradiation-induced graft polymerization to confer a positive charge. Then, CNT-DDAs are blended with polyurethane (PU) to prepare porous microspheres using the electro-spraying method. The obtained microspheres with a pore diameter of 2 μm served as pathogen traps and are termed as PU-CNT-DDA microspheres. Even at a high flow rate of 50 mL·min-1, the capture efficiencies of the PU-CNT-DDAs for Escherichia coli and Staphylococcus aureus remained 94.7% and 98.8%, respectively. This approach circumvents pathogen lysis and mortality, significantly curtails the release of PAMPs, and hampers the production of pro-inflammatory cytokines. Therefore, hemoperfusion using porous PU-CNT-DDAs as pathogen traps to capture active pathogens and alleviate inflammation opens a new route for sepsis therapy.

Development of New Composite Materials by Modifying the Surface of Porous Hydroxyapatite Using Cucurbit[n]urils

This study represents an advancement in the field of composite material engineering, focusing on the synthesis of composite materials derived from porous hydroxyapatite via surface modification employing cucurbit[n]urils, which are highly promising macrocyclic compounds. The surface modification procedure entailed the application of cucurbit[n]urils in an aqueous medium onto the hydroxyapatite surface. A comprehensive characterization of the resulting materials was undertaken, employing analytical techniques including infrared (IR) spectroscopy and scanning electron microscopy (SEM). Subsequently, the materials were subjected to rigorous evaluation for their hemolytic effect, anti-inflammatory properties, and cytotoxicity. Remarkably, the findings revealed a notable absence of typical hemolytic effects in materials incorporating surface-bound cucurbit[n]urils. This observation underscores the potential of these modified materials as biocompatible alternatives. Notably, this discovery presents a promising avenue for the fabrication of resilient and efficient biocomposites, offering a viable alternative to conventional approaches. Furthermore, these findings hint at the prospect of employing supramolecular strategies involving encapsulated cucurbit[n]urils in analogous processes. This suggests a novel direction for further research, potentially unlocking new frontiers in material engineering through the exploitation of supramolecular interactions.

Peptide-based self-assembled monolayers (SAMs): what peptides can do for SAMs and vice versa

Self-assembled monolayers (SAMs) represent highly ordered molecular materials with versatile biochemical features and multidisciplinary applications. Research on SAMs has made much progress since the early begginings of Au substrates and alkanethiols, and numerous examples of peptide-displaying SAMs can be found in the literature. Peptides, presenting increasing structural complexity, stimuli-responsiveness, and biological relevance, represent versatile functional components in SAMs-based platforms. This review examines the major findings and progress made on the use of peptide building blocks displayed as part of SAMs with specific functions, such as selective cell adhesion, migration and differentiation, biomolecular binding, advanced biosensing, molecular electronics, antimicrobial, osteointegrative and antifouling surfaces, among others. Peptide selection and design, functionalisation strategies, as well as structural and functional characteristics from selected examples are discussed. Additionally, advanced fabrication methods for dynamic peptide spatiotemporal presentation are presented, as well as a number of characterisation techniques. All together, these features and approaches enable the preparation and use of increasingly complex peptide-based SAMs to mimic and study biological processes, and provide convergent platforms for high throughput screening discovery and validation of promising therapeutics and technologies.

Immunomodulation Using BMP-7 and IL-10 to Enhance the Mineralization Capacity of Bone Progenitor Cells in a Fracture Hematoma-Like Environment

Following biomaterial implantation, a failure to resolve inflammation during the formation of a fracture hematoma can significantly limit the biomaterial's ability to facilitate bone regeneration. This study aims to combine the immunomodulatory and osteogenic effects of BMP-7 and IL-10 with the regenerative capacity of collagen-hydroxyapatite (CHA) scaffolds to enhance in vitro mineralization in a hematoma-like environment. Incubation of CHA scaffolds with human whole blood leads to rapid adsorption of fibrinogen, significant stiffening of the scaffold, and the formation of a hematoma-like environment characterized by a limited capacity to support the infiltration of human bone progenitor cells, a significant upregulation of inflammatory cytokines and acute phase proteins, and significantly reduced osteoconductivity. CHA scaffolds functionalized with BMP-7 and IL-10 significantly downregulate the production of key inflammatory cytokines, including IL-6, IL-8, and leptin, creating a more permissive environment for mineralization, ultimately enhancing the biomaterial's osteoconductivity. In conclusion, targeting the onset of inflammation in the early phase of bone healing using BMP-7 and IL-10 functionalized CHA scaffolds is a promising approach to effectively downregulate inflammatory processes, while fostering a more permissive environment for bone regeneration.

Obtaining New Biocompatible Composite Materials with Antibacterial Properties Based on Diatomite and Biologically Active Compounds

This study aimed to create new composite materials based on diatomite-a non-organic porous compound-through its surface modification with bioactive organic compounds, both synthetic and natural. Chloramphenicol, tetrahydroxymethylglycoluril and betulin were used as modifying substances. Composite materials were obtained by covering the diatomite surface with bioactive substance compounds as a solution and material dispersion in it. The materials were characterized by IR spectroscopy, SEM and X-ray photoelectron spectroscopy. For the biocomposites, the hemolytic effect, plasma proteins' adsorption on the surface and the antibacterial activity of the obtained materials were studied. Results show that the obtained materials are promising for medicine and agriculture.

Nanotexture and crystal phase regulation for synergistic enhancement in re-endothelialization on medical pure titanium surface

Re-endothelialization has been recognized as a promising strategy to address the tissue hyperplasia and subsequent restenosis which are major complications associated with vascular implant/interventional titanium devices. However, the uncontrollable over-proliferation of smooth muscle cells (SMCs) limits the clinical application of numerous modified strategies. Herein, a novel modified strategy involving with a two-step anodic oxidation and annealing treatment was proposed to achieve rapid re-endothelialization function regulated by regular honeycomb nanotexture and specific anatase phase on the titanium surface. Theoretical calculation revealed that the presence of nanotexture reduced the polar component of surface energy, while the generation of anatase significantly enhanced the polar component and total surface energy. Meanwhile, the modified surface with regular nanotexture and anatase phase produced positive effect on the expression of CD31, VE-Cadherin and down-regulated α-SMA proteins expression, indicating excellent capacity of pro-endothelial regeneration and inhibition of SMCs proliferation and migration. One-month in vivo implantation in rabbit carotid arteries further confirmed that modified tube implant surface effectively accelerated confluent endothelial monolayer formation and promoted native-like endothelium tissue regeneration. By contrast, original titanium tube implant induced a disorganized tissue proliferation in the lumen with a high risk of restenosis. Collectively, this study opens us an alternative route to achieve the function that selectively promotes endothelial cells (ECs) growth and suppresses SMCs on the medical titanium surface, which has a great potential in facilitating re-endothelialization on the surface of blood-contacting titanium implant.

Adsorbed polymer conjugates to adaptively inhibit blood coagulation activation by medical membranes

Adaptive drug release can combat coagulation and inflammation activation at the blood-material interface with minimized side effects. For that purpose, poly(styrene-alt-maleic-anhydride) copolymers were conjugated to heparin via coagulation-responsive linker peptides and shown to tightly adsorb onto poly(ethersulfone) (PES)-surfaces from aqueous solutions as monolayers. Coagulation-responsive release of unfractionated as well as low molecular weight heparins from the respective coatings was demonstrated to be functionally beneficial in human plasma and whole blood incubation with faster release kinetics resulting in stronger anticoagulant effects. Coated poly(ethersulfone)/poly(vinylpyrrolidone) (PES/PVP) flat membranes proved the technology to offer an easy, effective and robust anticoagulant interfacial functionalization of hemodialysis membranes. In perspective, the modularity of the adaptive release system will be used for inhibiting multiple activation processes.

Research progress of metal biomaterials with potential applications as cardiovascular stents and their surface treatment methods to improve biocompatibility

Facing the growing issue of cardiovascular diseases, metallic materials with higher tensile strength and fatigue resistance play an important role in treating diseases. This review lists the advantages and drawbacks of commonly used medical metallic materials for vascular stents. To avoid post-procedural threats such as thrombosis and in-stent restenosis, surface treatments, and coating methods have been used to further improve the biocompatibility of these materials. Surface treatments including laser, plasma treatment, polishing, oxidization, and fluorination can improve biocompatibility by modifying the surface charges, surface morphology, and surface properties of the material. Coating methods based on polymer coatings, carbon-based coatings, and drug-functional coatings can regulate the surface properties, and also serve as an effective barrier to the interaction of metallic biomaterial surfaces with biomolecules, which can be used to improve corrosion resistance and stability, as well as improve their biocompatibility. Biocompatibility serves as the most fundamental property of cardiovascular stents, and maintaining the excellent and stable biocompatibility of cardiovascular stent surfaces is a current research bottleneck. Few reviews have been published on metallic biomaterials as cardiovascular stents and their surface treatments. For the purpose of advancing research on cardiovascular stents, common metal biomaterials, surface treatment methods, and coating methods to improve biocompatibility and comprehensive properties of the materials are described in this review. Finally, we suggest future directions for stent development, including continuously improving the durability and stability of permanent stents, accelerating the development of biodegradable stents, and strengthening feedback to improve the safety and reliability of cardiovascular stents.

The Determination of the Biocompatibility of New Compositional Materials, including Carbamide-Containing Heterocycles of Anti-Adhesion Agents for Abdominal Surgery

Due to traumatic injuries, including those from surgical procedures, adhesions occur in over 50% of cases, necessitating exclusive surgical intervention for treatment. However, preventive measures can be implemented during abdominal organ surgeries. These measures involve creating a barrier around internal organs to forestall adhesion formation in the postoperative phase. Yet, the effectiveness of the artificial barrier relies on considerations of its biocompatibility and the avoidance of adverse effects on the body. This study explores the biocompatibility aspects, encompassing hemocompatibility, cytotoxicity, and antibacterial and antioxidant activities, as well as the adhesion of blood serum proteins and macrophages to the surface of new composite film materials. The materials, derived from the sodium salt of carboxymethylcellulose modified by glycoluril and allantoin, were investigated. The research reveals that film materials with a heterocyclic fragment exhibit biocompatibility comparable to commercially used samples in surgery. Notably, film samples developed with glycoluril outperform the effects of commercial samples in certain aspects.

A novel noble metal stent coating reduces in vitro platelet activation and acute in vivo thrombosis formation: a blinded study

Inherent to any stenting procedure is the prescription of dual antiplatelet therapy (DAPT) to reduce the platelet response. Clinical guidelines recommend 6-12 months of DAPT, depending on stent type, clinical picture and patient factors. Our hypothesis is that a nanostructured noble metal coating has the potential to reduce protein deposition and platelet activation. These effects would reduce subsequent thrombo-inflammatory reactions, potentially mitigating the need for an extensive DAPT in the acute phase. Here, a noble metal nanostructure coating on stents is investigated. Twelve pigs underwent endovascular implantation of coated and non-coated stents for paired comparisons in a blinded study design. The non-coated control stent was placed at the contralateral corresponding artery. Volumetric analysis of angiographic data, performed by a treatment blinded assessor, demonstrated a significant thrombus reduction for one of the coatings compared to control. This effect was already seen one hour after implantation. This finding was supported by in vitro data showing a significant reduction of coagulation activation in the coated group. This novel coating shows promise as an implant material addition and could potentially decrease the need for DAPT in the early phases of stent implementation.

Advanced in vitro hemocompatibility assessment of biomaterials using a new flow incubation system

Physiologically relevant in vitro hemocompatibility assessment of biomaterials remains challenging. We present a new setup that enables standardized whole blood incubation of biomedical materials under flow. A blood volume of 2 mL is recirculated over test surfaces in a custom-made parallel plate incubation system to determine the activation of hemostasis and inflammation. Controlled physiological shear rates between 125 s-1 and 1250 s-1 and minimized contact to air are combined with a natural-like pumping process. A unique feature of this setup allows tracing adhesion of blood cells to test surfaces microscopically in situ. Validation testing was performed in comparison to previously applied whole blood incubation methodologies. Experiments with the newly developed setup showed that even small obstacles to blood flow activate blood (independent of materials-induced blood activation levels); that adhesion of blood cells to biomaterials equilibrates within 5 to 10 min; that high shear rates (1250 compared to 375 s-1) induce platelet activation; and that hemolysis, platelet factor 4 (PF4) release and platelet loss - but not thrombin formation - depend on shear rate (within the range investigated, 125 to 1250 s-1).

Incorporating Anticoagulant and Antiplatelet Dual Functional Groups into Thermosetting Polymer Chain for Enhancing Antithrombogenicity

In clinical practice, high-effective antithrombosis remains a challenge for blood-contacting medical devices. Inspired by the enhanced antithrombogenicity of anticoagulant and antiplatelet combination therapy, a strategy is proposed to synthesize dual-pathway antithrombotic polymers by incorporating anticoagulant and antiplatelet dual functional groups into a single thermosetting polymer chain. The synthesized polymer shows increased antithrombogenicity in vitro, with prolonged activated partial thromboplastin time (APTT) and decreased platelet adhesion. Additionally, it downregulates the expression of coagulation- and inflammation-related factors in rabbit plasma after ex vivo arteriovenous shunt assay and maintains patency of small vascular grafts for at least 6 months without thrombosis on the luminal surface after in vivo replacement of rabbit carotid artery. This work provides a new approach to producing novel antithrombotic polymers for blood-contacting medical devices.

Surface Engineering of Central Venous Catheters via Combination of Antibacterial Endothelium-Mimicking Function and Fibrinolytic Activity for Combating Blood Stream Infection and Thrombosis

Long-term blood-contacting devices (e.g., central venous catheters, CVCs) still face the highest incidence of blood stream infection and thrombosis in clinical application. To effectively address these complications, this work reports a dual-functional surface engineering strategy for CVCs by organic integration of endothelium-mimicking and fibrinolytic functions. In this proposal, a lysine (Lys)/Cu2+ -incorporated zwitterionic polymer coating (defined as PDA/Lys/Cu-SB) is designed and robustly fabricated onto commercial CVCs using a facile two-step process. Initially, adhesive ene-functionalized dopamine is covalently reacted with Lys and simultaneously coordinated with bactericidal Cu2+ ions, leading to the deposition of a PDA/Lys/Cu coating on CVCs through mussel foot protein inspired surface chemistry. Next, zwitterionic poly(sulfobetaine methacrylate) (pSB) brushes are grafted onto the PDA/Lys/Cu coating to endow lubricant and antifouling properties. In the final PDA/Lys/Cu-SB coating, endothelium-mimicking function is achieved by combining the catalytic generation of nitric oxide from the chelated Cu2+ with antifouling pSB brushes, which led to significant prevention of thrombosis, and bacterial infection in vivo. Furthermore, the immobilized Lys with fibrinolytic activity show remarkably enhanced long-term anti-thrombogenic properties as evidenced in vivo by demonstrating the capability to lyse nascent clots. Therefore, this developed strategy provides a promising solution for long-term blood-contacting devices to combat thrombosis and infection.

MyD88-dependent Toll-like receptor 2 signaling modulates macrophage activation on lysate-adsorbed Teflon™ AF surfaces in an in vitro biomaterial host response model

The adsorbed protein layer on an implanted biomaterial surface is known to mediate downstream cell-material interactions that drive the host response. While the adsorption of plasma-derived proteins has been studied extensively, the adsorption of damage-associated molecular patterns (DAMPs) derived from damaged cells and matrix surrounding the implant remains poorly understood. Previously, our group developed a DAMP-adsorption model in which 3T3 fibroblast lysates were used as a complex source of cell-derived DAMPs and we demonstrated that biomaterials with adsorbed lysate potently activated RAW-Blue macrophages via Toll-like receptor 2 (TLR2). In the present study, we characterized the response of mouse bone marrow derived macrophages (BMDM) from wildtype (WT), TLR2-/- and MyD88-/- mice on Teflon™ AF surfaces pre-adsorbed with 10% plasma or lysate-spiked plasma (10% w/w total protein from 3T3 fibroblast lysate) for 24 hours. WT BMDM cultured on adsorbates derived from 10% lysate in plasma had significantly higher gene and protein expression of IL-1β, IL-6, TNF-α, IL-10, RANTES/CCL5 and CXCL1/KC, compared to 10% plasma-adsorbed surfaces. Furthermore, the upregulation of pro-inflammatory cytokine and chemokine expression in the 10% lysate in plasma condition was attenuated in TLR2-/- and MyD88-/- BMDM. Proteomic analysis of the adsorbed protein layers showed that even this relatively small addition of lysate-derived proteins within plasma (10% w/w) caused a significant change to the adsorbed protein profile. The 10% plasma condition had fibrinogen, albumin, apolipoproteins, complement, and fibronectin among the top 25 most abundant proteins. While proteins layers generated from 10% lysate in plasma retained fibrinogen and fibronectin among the top 25 proteins, there was a disproportionate increase in intracellular proteins, including histones, tubulins, actins, and vimentin. Furthermore, we identified 7 DAMPs or DAMP-related proteins enriched in the 10% plasma condition (fibrinogen, apolipoproteins), compared to 39 DAMPs enriched in the 10% lysate in plasma condition, including high mobility group box 1 and histones. Together, these findings indicate that DAMPs and other intracellular proteins readily adsorb to biomaterial surfaces in competition with plasma proteins, and that adsorbed DAMPs induce an inflammatory response in adherent macrophages that is mediated by the MyD88-dependent TLR2 signaling pathway.

Pediatric pulmonary valve replacements: Clinical challenges and emerging technologies

Congenital heart diseases (CHDs) frequently impact the right ventricular outflow tract, resulting in a significant incidence of pulmonary valve replacement in the pediatric population. While contemporary pediatric pulmonary valve replacements (PPVRs) allow satisfactory patient survival, their biocompatibility and durability remain suboptimal and repeat operations are commonplace, especially for very young patients. This places enormous physical, financial, and psychological burdens on patients and their parents, highlighting an urgent clinical need for better PPVRs. An important reason for the clinical failure of PPVRs is biofouling, which instigates various adverse biological responses such as thrombosis and infection, promoting research into various antifouling chemistries that may find utility in PPVR materials. Another significant contributor is the inevitability of somatic growth in pediatric patients, causing structural discrepancies between the patient and PPVR, stimulating the development of various growth-accommodating heart valve prototypes. This review offers an interdisciplinary perspective on these challenges by exploring clinical experiences, physiological understandings, and bioengineering technologies that may contribute to device development. It thus aims to provide an insight into the design requirements of next-generation PPVRs to advance clinical outcomes and promote patient quality of life.

Strategies for surface coatings of implantable cardiac medical devices

Cardiac medical devices (CMDs) are required when the patient's cardiac capacity or activity is compromised. To guarantee its correct functionality, the building materials in the development of CMDs must focus on several fundamental properties such as strength, stiffness, rigidity, corrosion resistance, etc. The challenge is more significant because CMDs are generally built with at least one metallic and one polymeric part. However, not only the properties of the materials need to be taken into consideration. The biocompatibility of the materials represents one of the major causes of the success of CMDs in the short and long term. Otherwise, the material will lead to several problems of hemocompatibility (e.g., protein adsorption, platelet aggregation, thrombus formation, bacterial infection, and finally, the rejection of the CMDs). To enhance the hemocompatibility of selected materials, surface modification represents a suitable solution. The surface modification involves the attachment of chemical compounds or bioactive compounds to the surface of the material. These coatings interact with the blood and avoid hemocompatibility and infection issues. This work reviews two main topics: 1) the materials employed in developing CMDs and their key characteristics, and 2) the surface modifications reported in the literature, clinical trials, and those that have reached the market. With the aim of providing to the research community, considerations regarding the choice of materials for CMDs, together with the advantages and disadvantages of the surface modifications and the limitations of the studies performed.

Biomimetic, Injectable, and Self-Healing Hydrogels with Sustained Release of Ranibizumab to Treat Retinal Neovascularization

Retinal neovascularization (RNV) is a typical feature of ischemic retinal diseases that can lead to traction retinal detachment and even blindness in patients, in which the vascular endothelial cell growth factor (VEGF) plays a pivotal role. However, most anti-VEGF drugs currently used for treating RNV, such as ranibizumab, need frequent and repeated intravitreal injections due to their short intravitreal half-life, which increases the incidence of complications. Herein, a hydrogel intravitreal drug delivery system (DDS) is prepared by a dynamic Schiff base reaction between aminated hyaluronic acid and aldehyde-functionalized Pluronic 127 for sustained release of ranibizumab. The prepared hydrogel system named HP@Ran exhibits excellent injectability, self-healing ability, structural stability, cytocompatibility, and blood compatibility. According to an in vitro drug release study, the hydrogel system continuously releases the model drug bovine serum albumin for more than 56 days. Importantly, in an in vivo rabbit persistent RNV model, the HP@Ran hydrogel system continuously releases pharmacologically active ranibizumab for more than 7 weeks and also exhibits superior anti-angiogenic efficacy over ranibizumab treatment by decreasing vascular leakage and neovascularization at 12 weeks. Thus, the developed HP@Ran hydrogel system possesses great potential for intravitreal DDS for the treatment of RNV.

A functionalized biological heart valve by double bond crosslinking with enhanced biocompatibility and antithrombogenicity

With the advancement of minimally invasive interventional therapy, biological heart valves (BHVs) have been extensively used in clinics. However, BHVs are generally prone to degeneration within 10-15 years after implantation due to defects including cytotoxicity, immune response, calcification and thrombosis, which are closely related to glutaraldehyde-crosslinking. In this work, we prepared a functionalized BHV through the in situ polymerization of methacrylated porcine pericardium and 2-hydroxyethyl methacrylate to avoid and overcome the defects of glutaraldehyde-crosslinked BHVs. The functionalized BHV was proven to be stable against enzymatic degradation and compatible towards HUVECs. After implantation in rats subcutaneously, a significantly mitigated immune response and reduced calcification were observed in the functionalized BHV. With the grafting of hydrophilic 2-hydroxyethyl methacrylate polymers, the antithrombogenicity of BHV was markedly enhanced by resisting the unfavorable adhesion of blood components. Moreover, the hydrodynamics of the functionalized BHV totally conformed to ISO 5840-3 under a wide range of simulated physiological conditions. These results indicate that the functionalized BHV with enhanced biocompatibility, anticalcification property and antithrombogenicity exhibited a low risk of degeneration and should be explored for further application.

Superhydrophobic Biological Fluid-Repellent Surfaces: Mechanisms and Applications

Superhydrophobic biological fluid-repellent surfaces (SBFRSs) have attracted great attention in the treatment of blood and urine-related diseases because of their unique wettability and compatibility, which creates a new path for the development of medical apparatus and instruments, and are expected to create advances in various fields. Here, this review provides an up-to-date summary of research progress on the repellent mechanism and application of SBFRSs. The underlying physical and chemical principles for designing superhydrophobic surfaces are first introduced. Then, the dialectical influences of solid-liquid interactions between superhydrophobic surfaces and biological fluids on the wettability and compatibility are emphatically expounded. Subsequently, attention is drawn to the recent applications of SBFRSs in biomedical fields, such as surgical medical apparatus, implant materials, extracorporeal circulation devices, and biological fluid detection. Finally, the outlook and challenges in terms of employing SBFRSs are also discussed. This review is expected to provide a comprehensive guidance for the preparation of SBFRSs with compatibility and long-term superhydrophobic stability that is closely related to clinical applications.

Mechanisms for Reduced Fibrin Clot Formation on Liquid-Infused Surfaces

Biomedical devices are prone to blood clot formation (thrombosis), and liquid-infused surfaces (LIS) are effective in reducing the thrombotic response. However, the mechanisms that underpin this performance, and in particular the role of the lubricant, are not well understood. In this work, it is investigated whether the mechanism of LIS action is related to i) inhibition of factor XII (FXII) activation and the contact pathway; ii) reduced fibrin density of clots formed on surfaces; iii) increased mobility of proteins or cells on the surface due to the interfacial flow of the lubricant. The chosen LIS is covalently tethered, nanostructured layers of perfluorocarbons, infused with thin films of medical-grade perfluorodecalin (tethered-liquid perfluorocarbon), prepared with chemical vapor deposition previously optimized to retain lubricant under flow. Results show that in the absence of external flow, interfacial mobility is inherently higher at the liquid-blood interface, making it a key contributor to the low thrombogenicity of LIS, as FXII activity and fibrin density are equivalent at the interface. The findings of this study advance the understanding of the anti-thrombotic behavior of LIS-coated biomedical devices for future coating design. More broadly, enhanced interfacial mobility may be an important, underexplored mechanism for the anti-fouling behavior of surface coatings.

The path to a hemocompatible cardiovascular implant: Advances and challenges of current endothelialization strategies

Cardiovascular (CV) implants are still associated with thrombogenicity due to insufficient hemocompatibility. Endothelialization of their luminal surface is a promising strategy to increase their hemocompatibility. In this review, we provide a collection of research studies and review articles aiming to summarize the recent efforts on surface modifications of CV implants, including stents, grafts, valves, and ventricular assist devises. We focus in particular on the implementation of micrometer or nanoscale surface modifications, physical characteristics of known biomaterials (such as wetness and stiffness), and surface morphological features (such as gratings, fibers, pores, and pits). We also review how biomechanical signals originating from the endothelial cell for surface interaction can be directed by topography engineering approaches toward the survival of the endothelium and its long-term adaptation. Finally, we summarize the regulatory and economic challenges that may prevent clinical implementation of endothelialized CV implants.

Anti-Fouling Surfaces for Extracorporeal Membrane Oxygenation by Surface Grafting of Hydrophilic Sulfoxide Polymers

Non-thrombogenic surfaces for extracorporeal membrane oxygenation (ECMO) devices are important to increase their duration of usage and to enable long-term life support. However, the contact of blood with the hydrophobic synthetic ECMO membrane materials such as poly(4-methyl-1-pentene) (PMP) can activate the coagulation cascade, causing thrombosis and a series of consequent complications during ECMO operation. Targeting this problem, we proposed to graft highly hydrophilic sulfoxide polymer brushes onto the PMP surfaces via gamma ray irradiation-initiated polymerization to improve the hemocompatibility of the membrane. Through this chemical modification, the surface of the PMP film is altered from hydrophobic to hydrophilic. The extent of plasma protein adsorption and platelet adhesion, the prerequisite mediators of the coagulation cascade and thrombus formation, are drastically reduced compared with those of the unmodified PMP film. Therefore, the method provides a facile approach to modify PMP materials with excellent antifouling properties and improved hemocompatibility demanded by the applications in ECMO and other blood-contacting medical devices.

Investigation of heparin-loaded poly(ethylene glycol)-based hydrogels as anti-thrombogenic surface coatings for extracorporeal membrane oxygenation

Extracorporeal membrane oxygenation (ECMO), a critical life-sustaining tool, faces significant challenges for the maintenance of normal haemostasis due to the large volume of circulating blood continuously in contact with artificial surfaces, hyperoxia and excessive shear stresses of the extracorporeal circuit. From a biomaterials perspective, it has been hypothesised that drug eluting coatings composed of haemocompatible hydrogels loaded with an anticoagulant drug could potentially enhance the haemocompatibility of the circuit. Poly(ethylene glycol) (PEG) has been well established as a biocompatible and anti-fouling material with wide biomedical application. Unfractionated heparin is the most commonly used anticoagulant for ECMO. In the present study, the feasibility of using heparin-loaded PEG-based hydrogels as anti-thrombogenic surface coatings for ECMO was investigated. The hydrogels were synthesised by photopolymerisation using poly(ethylene glycol) diacrylate (PEGDA) as the crosslinking monomer and poly(ethylene glycol) methacrylate (PEGMA) as the hydrophilic monomer, with heparin loaded into the pre-gel solution. Factors which could affect the release of heparin were investigated, including the ratio of PEGDA/PEGMA, water content, loading level of heparin and the flow of fluid past the hydrogel. Our results showed that increased crosslinker content and decreased water content led to slower heparin release. The hydrogels with water contents of 60 wt% and 70 wt% could achieve a sustained heparin release by adjusting the ratio of PEGDA/PEGMA. The anticoagulation efficacy of the released heparin was evaluated by measuring the activated clotting time of whole blood. The hydrogels with desirable heparin release profiles were prepared onto poly(4-methyl-1-pentene) (PMP) films with the same chemical composition as the PMP ECMO membranes. The coatings showed sustained heparin release with a cumulative release of 70-80% after 7 days. Haemocompatibility tests demonstrated that PEG hydrogel coatings significantly reduced platelet adhesion and prolonged plasma recalcification time. These results suggest that heparin-loaded PEG hydrogels are potential anti-thrombogenic coatings for ECMO.

Improving hemocompatibility of artificial lungs by click conjugation of glycoengineered endothelial cells onto blood-contacting surfaces

Artificial lungs, also known as oxygenators, allow adequate oxygenation of the blood in patients with severe respiratory failure and enable patient survival. However, the insufficient hemocompatibility of the current of artificial lungs hampers their long-term use. Therefore, in this study, a novel strategy was developed to efficiently endothelialize blood-contacting surfaces to improve their hemocompatibility. Hollow fiber membranes (HFMs) were functionalized with dibenzylcyclooctyne (DBCO), and endothelial cells were glycoengineered for covalent conjugation to DBCO by a copper-free click reaction. Metabolic glycoengineering using azidoacetylmannosamine-tetraacylated (Ac₄ManNAz) resulted in highly efficient functionalization of endothelial cells with azide (N₃) molecules on the cell surface without negative impact on cell viability. After 48 h, significantly improved endothelialization was detected on the HFM surfaces functionalized with DBCO compared to unmodified HFMs. Endothelial cells were responsive to inflammatory stimulus and expressed adhesion-promoting molecules (E-selectin, VCAM-1, and ICAM-1). Furthermore, the hemocompatibility of HFMs was analyzed by dynamic incubation with fresh human blood. DBCO-coated and uncoated HFMs showed a comparable hemocompatibility, but the endothelialization of HFMs significantly reduced the activation of blood coagulation and platelets. Interestingly, the incubation of endothelialized HFMs with human blood further reduced the expression of E-selectin and VCAM-1 in endothelial cells. In this study, a highly efficient, cell-compatible method for endothelialization of artificial lungs was established. This click chemistry-based method can be also applied for the endothelialization of other artificial surfaces for tissue engineering and regenerative medicine applications.

Vitamin E (Alpha-Tocopherol) Metabolism and Nutrition in Chronic Kidney Disease

Vitamin E (alpha-tocopherol) is an essential micronutrient and fat-soluble antioxidant with proposed role in protecting tissues from uncontrolled lipid peroxidation. This vitamin has also important protein function and gene modulation effects. The metabolism of vitamin E depends on hepatic binding proteins that selectively retain food alpha-tocopherol for incorporation into nascent VLDL and tissue distribution together with esterified cholesterol and triglycerides. Chronic kidney disease (CKD) is a condition of oxidative stress and increased lipid peroxidation, that are associated with alterations of alpha-tocopherol metabolism and function. Specific changes have been reported for the levels of its enzymatic metabolites, including both short-chain and long-chain metabolites, the latter being endowed with regulatory functions on enzymatic and gene expression processes important for the metabolism of lipids and xenobiotics detoxification, as well as for the control of immune and inflammatory processes. Vitamin E therapy has been investigated in CKD using both oral vitamin E protocols and vitamin E-coated hemodialyzers, showing promising results in the secondary prevention of cardiovascular disease, as well as of immune and hematological complications. These therapeutic approaches are reviewed in the present article, together with a narrative excursus on the main findings indicating CKD as a condition of relative deficiency and impaired metabolism of vitamin E.

Biocompatibility of Surface-Modified Membranes for Chronic Hemodialysis Therapy

Hemodialysis is a life-sustaining therapy for millions of people worldwide. However, despite considerable technical and scientific improvements, results are still not fully satisfactory in terms of morbidity and mortality. The membrane contained in the hemodialyzer is undoubtedly the main determinant of the success and quality of hemodialysis therapy. Membrane properties influence solute removal and the interactions with blood components that define the membrane’s biocompatibility. Bioincompatibility is considered a potential contributor to several uremic complications. Thus, the development of more biocompatible polymers used as hemodialyzer membrane is of utmost importance for improving results and clinical patient outcomes. Many different surface-modified membranes for hemodialysis have been manufactured over recent years by varying approaches in the attempt to minimize blood incompatibility. Their main characteristics and clinical results in hemodialysis patients were reviewed in the present article.

Construction of Mussel-Inspired Dopamine-Zn2+ Coating on Titanium Oxide Nanotubes to Improve Hemocompatibility, Cytocompatibility, and Antibacterial Activity

Zinc ions (Zn2+) are a highly potent bioactive factor with a broad spectrum of physiological functions. In situ continuous and controllable release of Zn2+ from the biomaterials can effectively improve the biocompatibility and antibacterial activity. In the present study, inspired by the adhesion and protein cross-linking in the mussel byssus, with the aim of improving the biocompatibility of titanium, a cost-effective one-step metal-catecholamine assembly strategy was developed to prepare a biomimetic dopamine-Zn2+ (DA-Zn2+) coating by immersing the titanium oxide nanotube (TNT) arrays on the titanium surface prepared by anodic oxidation into an aqueous solution containing dopamine (DA) and zinc ions (Zn2+). The DA-Zn2+ coatings with the different zinc contents exhibited excellent hydrophilicity. Due to the continuous release of zinc ions from the DA-Zn2+ coating, the coated titanium oxide nanotubes displayed excellent hemocompatibility characterized by platelet adhesion and activation and hemolysis assay. Moreover, the DA-Zn2+-coated samples exhibited an excellent ability to enhance endothelial cell (EC) adhesion and proliferation. In addition, the DA-Zn2+ coating can also enhance the antibacterial activity of the nanotubes. Therefore, long-term in situ Zn2+-releasing coating of the present study could serve as the bio-surfaces for long-term prevention of thrombosis, improvement of cytocompatibility to endothelial cells, and antibacterial activity. Due to the easy operation and strong binding ability of the polydopamine on various complicated shapes, the method of the present study can be further applied to other blood contact biomaterials or implantable medical devices to improve the biocompatibility.

A thrombin-triggered self-regulating anticoagulant strategy combined with anti-inflammatory capacity for blood-contacting implants

Interrelated coagulation and inflammation are impediments to endothelialization, a prerequisite for the long-term function of cardiovascular materials. Here, we proposed a self-regulating anticoagulant coating strategy combined with anti-inflammatory capacity, which consisted of thrombin-responsive nanogels with anticoagulant and anti-inflammatory components. As an anticoagulant, rivaroxaban was encapsulated in nanogels cross-linked by thrombin-cleavable peptide and released upon the trigger of environmental thrombin, blocking the further coagulation cascade. The superoxide dismutase mimetic Tempol imparted the antioxidant property. Polyphenol epigallocatechin gallate (EGCG), in addition to its anti-inflammatory function in synergy with Tempol, also acted as a weak cross-linker to stabilize the coating. The effectiveness and versatility of this coating were validated using two typical cardiovascular devices as models, biological valves and vascular stents. It was demonstrated that the coating worked as a precise strategy to resist coagulation and inflammation, escorted reendothelialization on the cardiovascular devices, and provided a new perspective for designing endothelium-like functional coatings.

Fabrication and Hemocompatibility Evaluation of a Robust Honeycomb Nanostructure on Medical Pure Titanium Surface

Thrombosis induced by blood-contacting medical devices is still a major clinical problem, resulting in some serious complications such as infarction, irreversible tissue damage, and even death. Therefore, seeking an effective and safe surface modification approach to improve the hemocompatibility of the material is still urgent. In this research, a novel and facile approach was proposed to fabricate a robust honeycomb nanostructure on medical pure titanium surface by two-step anodic oxidation, which effectively enhanced the physicochemical performance and hemocompatibility of the material. Especially, the honeycomb nanostructure that underwent annealing treatment at 500 °C (HN-Ti-500 °C) presented significant performance to suppress the coagulation cascade in the in vitro tests, the reason mainly ascribed to an overall repulsive interaction between the protein molecule related to thrombosis and material surface based on an extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory analysis. Furthermore, a vessel stent fabricated by HN-Ti-500 °C was implanted into the left carotid artery of rabbits for 1 month. The antithrombotic mechanism and biocompatibility of the modified surface were further verified. The results presented that no thrombus generated and adhered onto the inner surface of the modified stent, and no obvious disorder hyperplasia and inflammation were observed in the intima tissue of the vessel at the implantation site, which indicated that the modified surface could effectively decrease the risk of in-stent restenosis and thrombosis. This work offers a promising strategy for surface modification of blood-contacting medical titanium material to address the clinical complications associated with restenosis and thrombosis.

Advanced Strategies to Thwart Foreign Body Response to Implantable Devices

Mitigating the foreign body response (FBR) to implantable medical devices (IMDs) is critical for successful long‐term clinical deployment. The FBR is an inevitable immunological reaction to IMDs, resulting in inflammation and subsequent fibrotic encapsulation. Excessive fibrosis may impair IMDs function, eventually necessitating retrieval or replacement for continued therapy. Therefore, understanding the implant design parameters and their degree of influence on FBR is pivotal to effective and long lasting IMDs. This review gives an overview of FBR as well as anti‐FBR strategies. Furthermore, we highlight recent advances in biomimetic approaches to resist FBR, focusing on their characteristics and potential biomedical applications.

Using Graphene-Based Materials for Stiff and Strong Poly(ethylene glycol) Hydrogels

Blood-contacting devices are increasingly important for the management of cardiovascular diseases. Poly(ethylene glycol) (PEG) hydrogels represent one of the most explored hydrogels to date. However, they are mechanically weak, which prevents their use in load-bearing biomedical applications (e.g., vascular grafts, cardiac valves). Graphene and its derivatives, which have outstanding mechanical properties, a very high specific surface area, and good compatibility with many polymer matrices, are promising candidates to solve this challenge. In this work, we propose the use of graphene-based materials as nanofillers for mechanical reinforcement of PEG hydrogels, and we obtain composites that are stiffer and stronger than, and as anti-adhesive as, neat PEG hydrogels. Results show that single-layer and few-layer graphene oxide can strengthen PEG hydrogels, increasing their stiffness up to 6-fold and their strength 14-fold upon incorporation of 4% w/v (40 mg/mL) graphene oxide. The composites are cytocompatible and remain anti-adhesive towards endothelial cells, human platelets and Staphylococcus aureus, similar to neat hydrogels. To the best of our knowledge, this is the first work to report such an increase of the tensile properties of PEG hydrogels using graphene-based materials as fillers. This work paves the way for the exploitation of PEG hydrogels as a backbone material for load-bearing applications.

Engineering immunomodulatory and osteoinductive implant surfaces via mussel adhesion-mediated ion coordination and molecular clicking

Immune response and new tissue formation are important aspects of tissue repair. However, only a single aspect is generally considered in previous biomedical interventions, and the synergistic effect is unclear. Here, a dual-effect coating with immobilized immunomodulatory metal ions (e.g., Zn²⁺) and osteoinductive growth factors (e.g., BMP-2 peptide) is designed via mussel adhesion-mediated ion coordination and molecular clicking strategy. Compared to the bare TiO₂ group, Zn²⁺ can increase M2 macrophage recruitment by up to 92.5% in vivo and upregulate the expression of M2 cytokine IL-10 by 84.5%; while the dual-effect of Zn²⁺ and BMP-2 peptide can increase M2 macrophages recruitment by up to 124.7% in vivo and upregulate the expression of M2 cytokine IL-10 by 171%. These benefits eventually significantly enhance bone-implant mechanical fixation (203.3 N) and new bone ingrowth (82.1%) compared to the bare TiO₂ (98.6 N and 45.1%, respectively). Taken together, the dual-effect coating can be utilized to synergistically modulate the osteoimmune microenvironment at the bone-implant interface, enhancing bone regeneration for successful implantation.

Immune response and new tissue formation are important aspects of tissue repair but often only one aspect is considered in biomedical interventions. Here, the authors report on the use of a mussel-like surface coating to immobilize immune modulating metal ions and growth factors and demonstrated improved in vivo outcomes.

Blood-incompatibility in haemodialysis: alleviating inflammation and effects of coagulation

Blood-incompatibility is an inevitability of all blood-contacting device applications and therapies, including haemodialysis (HD). Blood leaving the environment of blood vessels and the protection of the endothelium is confronted with several stimuli of the extracorporeal circuit (ECC), triggering the activation of blood cells and various biochemical pathways of plasma. Prevention of blood coagulation, a major obstacle that needed to be overcome to make HD possible, remains an issue to contend with. While anticoagulation (mainly with heparin) successfully prevents clotting within the ECC to allow removal of uraemic toxins across the dialysis membrane wall, it is far from ideal, triggering heparin-induced thrombocytopenia in some instances. Soluble fibrin can form even in the presence of heparin and depending on the constitution of the patient and activation of platelets, could result in physical clots within the ECC (e.g. bubble trap chamber) and, together with other plasma and coagulation proteins, result in increased adsorption of proteins on the membrane surface. The buildup of this secondary membrane layer impairs the transport properties of the membrane to reduce the clearance of uraemic toxins. Activation of complement system-dependent immune response pathways leads to leukopenia, formation of platelet–neutrophil complexes and expression of tissue factor contributing to thrombotic processes and a procoagulant state, respectively. Complement activation also promotes recruitment and activation of leukocytes resulting in oxidative burst and release of pro-inflammatory cytokines and chemokines, thereby worsening the elevated underlying inflammation and oxidative stress condition of chronic kidney disease patients. Restricting all forms of blood-incompatibility, including potential contamination of dialysis fluid with endotoxins leading to inflammation, during HD therapies is thus still a major target towards more blood-compatible and safer dialysis to improve patient outcomes. We describe the mechanisms of various activation pathways during the interaction between blood and components of the ECC and describe approaches to mitigate the effects of these adverse interactions. The opportunities to develop improved dialysis membranes as well as implementation strategies with less potential for undesired biological reactions are discussed.

Reduced thrombogenicity of surface-treated Nitinol implants steered by altered protein adsorption

Blood-contacting medical implants made of Nitinol and other titanium alloys, such as neurovascular flow diverters and peripheral stents, have the disadvantage of being highly thrombogenic. This makes the use of systemic (dual) anti-platelet/anticoagulant therapies inevitable with related risks of device thrombosis, bleeding and other complications. Meeting the urgent clinical demand for a less thrombogenic Nitinol surface, we describe here a simple treatment of standard, commercially available Nitinol that renders its surface ultra-hydrophilic and functionalized with phosphate ions. The efficacy of this treatment was assessed by comparing standard and surface-treated Nitinol disks and braids, equivalent to flow diverters. Static and dynamic (Chandler loop) blood incubation tests showed a drastic reduction of thrombus formation on treated devices. Surface chemistry and proteomic analysis indicated a key role of phosphate and calcium ions in steering blood protein adsorption and avoiding coagulation cascade activation and platelet adhesion. A good endothelialization of the surface confirmed the biocompatibility of the treated surface. STATEMENT OF SIGNIFICANCE: Titanium alloys such as Nitinol are biocompatible and show favorable mechanical properties, which led to their widespread use in medical implants. However, in contact with blood their surface triggers the activation of the intrinsic coagulation cascade, which may result in catastrophic thrombotic events. The presented results showed that a phosphate functionalization of the titanium oxide surface suppresses the activation of both coagulation cascade and platelets, avoiding the subsequent formation of a blood clot. This novel approach has therefore a great potential for mitigating the risks associated to either thrombosis or bleeding complications (due to systemic anticoagulation) in patients with cardiovascular implants.

Control of Blood Coagulation by Hemocompatible Material Surfaces-A Review

Hemocompatibility of biomaterials in contact with the blood of patients is a prerequisite for the short- and long-term applications of medical devices such as cardiovascular stents, artificial heart valves, ventricular assist devices, catheters, blood linings and extracorporeal devices such as artificial kidneys (hemodialysis), extracorporeal membrane oxygenation (ECMO) and cardiopulmonary bypass. Although lower blood compatibility of materials and devices can be handled with systemic anticoagulation, its side effects, such as an increased bleeding risk, make materials that have a better hemocompatibility highly desirable, particularly in long-term applications. This review provides a short overview on the basic mechanisms of blood coagulation including plasmatic coagulation and blood platelets, as well as the activation of the complement system. Furthermore, a survey on concepts for tailoring the blood response of biomaterials to improve the hemocompatibility of medical devices is given which covers different approaches that either inhibit interaction of material surfaces with blood components completely or control the response of the coagulation system, blood platelets and leukocytes.

Biocompatibility pathways and mechanisms for bioactive materials: The bioactivity zone

This essay analyzes the scientific evidence that forms the basis of bioactive materials, covering the fundamental understanding of bioactivity phenomena and correlation with the mechanisms of biocompatibility of biomaterials. This is a detailed assessment of performance in areas such as bone-induction, cell adhesion, immunomodulation, thrombogenicity and antimicrobial behavior. Bioactivity is the modulation of biological activity by characteristics of the interfacial region that incorporates the material surface and the immediate local host tissue. Although the term ‘bioactive material’ is widely used and has a well understood general meaning, it would be useful now to concentrate on this interfacial region, considered as ‘the bioactivity zone’. Bioactivity phenomena are either due to topographical/micromechanical characteristics, or to biologically active species that are presented in the bioactivity zone. Examples of topographical/micromechanical effects are the modulation of the osteoblast – osteoclast balance, nanotopographical regulation of cell adhesion, and bactericidal nanostructures. Regulation of bioactivity by biologically active species include their influence, especially of metal ions, on signaling pathways in bone formation, the role of cell adhesion molecules and bioactive peptides in cell attachment, macrophage polarization by immunoregulatory molecules and antimicrobial peptides. While much experimental data exists to demonstrate the potential of such phenomena, there are considerable barriers to their effective clinical translation. This essay shows that there is solid scientific evidence of the existence of bioactivity mechanisms that are associated with some types of biomaterials, especially when the material is modified in a manner designed to specifically induce that activity.

The scientific principles and technological determinants of haemodialysis membranes

In most biological or industrial (including medical) separation processes, a membrane is a semipermeable barrier that allows or achieves selective transport between given compartments. In haemodialysis (HD), the semipermeable membrane is in a tubular geometry in the form of miniscule pipes (hollow fibres) and separation processes between compartments involve a complex array of scientific principles and factors that influence the quality of therapy a patient receives. Several conditions need to be met to accomplish the selective and desired removal of substances from blood in the inner cavity (lumen) of the hollow fibres and across the membrane wall into the larger open space surrounding each fibre. Current HD membranes have evolved and improved beyond measure from the experimental membranes available in the early developmental periods of dialysis. Today, the key functional determinants of dialysis membranes have been identified both in terms of their potential to remove uraemic retention solutes (termed ‘uraemic toxins’) as well subsidiary criteria they must additionally fulfill to avoid undesirable patient reactions or to ensure safety. The production of hundreds of millions of kilometres of hollow fibre membranes is truly a technological achievement to marvel, particularly in ensuring that the fibre dimensions of wall thickness and inner lumen diameter and controlled porosity—all so vital to core solute removal and detoxification functions of dialysis—are maintained for every centimetre length of the fragile fibres. Production of membranes will increase in parallel with the increase in the number of chronic kidney disease (CKD) patients expected to require HD therapies in the future. The provision of high-quality care entails detailed consideration of all aspects of dialysis membranes, as quality cannot in any way be compromised for the life-sustaining—like the natural membranes within all living organisms—function artificial dialysis membranes serve.

Biomaterial Wettability Affects Fibrin Clot Structure and Fibrinolysis

Thrombosis on blood-contacting medical devices can cause patient fatalities through device failure and unstable thrombi causing embolism. The effect of material wettability on fibrin network formation, structure, and stability is poorly understood. Under static conditions, fibrin fiber network volume and density increase in clots formed on hydrophilic compared to hydrophobic polystyrene surfaces. This correlates with reduced plasma clotting time and increased factor XIIa (FXIIa) activity. These structural differences are consistent up to 50 µm away from the material surface and are FXIIa dependent. Fibrin forms fibers immediately at the material interface on hydrophilic surfaces but are incompletely formed in the first 5 µm above hydrophobic surfaces. Additionally, fibrin clots on hydrophobic surfaces have increased susceptibility to fibrinolysis compared to clots formed on hydrophilic surfaces. Under low-flow conditions, clots are still denser on hydrophilic surfaces, but only 5 µm above the surface, showing the combined effect of the surface wettability and coagulation factor dilution with low flow. Overall, wettability affects fibrin fiber formation at material interfaces, which leads to differences in bulk fibrin clot density and susceptibility to fibrinolysis. These findings have implications for thrombus formed in stagnant or low-flow regions of medical devices and the design of nonthrombogenic materials.

Biomimetic silk biomaterials: Perlecan-functionalized silk fibroin for use in blood-contacting devices

Blood compatible materials are required for the development of therapeutic and diagnostic blood contacting devices as blood-material interactions are a key factor dictating device functionality. In this work, we explored biofunctionalization of silk biomaterials with a recombinantly expressed domain V of the human basement membrane proteoglycan perlecan (rDV) towards the development of blood compatible surfaces. Perlecan and rDV are of interest in vascular device development as they uniquely support endothelial cell, while inhibiting smooth muscle cell and platelet interactions. rDV was covalently immobilized on silk biomaterials using plasma immersion ion implantation (PIII), a new method of immobilizing proteins on silk biomaterials that does not rely on modification of specific amino acids in the silk protein chain, and compared to physisorbed and carbodiimide immobilized rDV. Untreated and treated silk biomaterials were examined for interactions with blood components with varying degrees of complexity, including isolated platelets, platelet rich plasma, blood plasma, and whole blood, both under agitated and flow conditions. rDV-biofunctionalized silk biomaterials were shown to be blood compatible in terms of platelet and whole blood interactions and the PIII treatment was shown to be an effective and efficient means of covalently immobilizing rDV in its bioactive form. These biomimetic silk biomaterials are a promising platform toward development of silk-based blood-contacting devices for therapeutic, diagnostic, and research applications. STATEMENT OF SIGNIFICANCE: Blood compatible materials are required for the development of therapeutic and diagnostic blood contacting devices as blood-material interactions are a key factor dictating device functionality. In this work, we explored biofunctionalization of silk biomaterials with a recombinantly expressed domain V (rDV) of the human basement membrane proteoglycan perlecan towards the development of blood compatible surfaces. Perlecan and rDV are of interest in vascular device development as they uniquely support endothelial cell, while inhibiting smooth muscle cell and platelet interactions. rDV was covalently immobilized on silk biomaterials using plasma immersion ion implantation (PIII), a new method of immobilizing proteins on silk biomaterials that does not rely on modification of specific amino acids in the silk protein chain. These biomimetic silk biomaterials are a promising platform toward development of silk-based blood-contacting devices for therapeutic, diagnostic, and research applications.

Anti-thrombogenic Surface Coatings for Extracorporeal Membrane Oxygenation: A Narrative Review

Extracorporeal membrane oxygenation (ECMO) is used in critical care to manage patients with severe respiratory and cardiac failure. ECMO brings blood from a critically ill patient into contact with a non-endothelialized circuit which can cause clotting and bleeding simultaneously in this population. Continuous systemic anticoagulation is needed during ECMO. The membrane oxygenator, which is a critical component of the extracorporeal circuit, is prone to significant thrombus formation due to its large surface area and areas of low, turbulent, and stagnant flow. Various surface coatings, including but not limited to heparin, albumin, poly(ethylene glycol), phosphorylcholine, and poly(2-methoxyethyl acrylate), have been developed to reduce thrombus formation during ECMO. The present work provides an up-to-date overview of anti-thrombogenic surface coatings for ECMO, including both commercial coatings and those under development. The focus is placed on the coatings being developed for oxygenators. Overall, zwitterionic polymer coatings, nitric oxide (NO)-releasing coatings, and lubricant-infused coatings have attracted more attention than other coatings and showed some improvement in in vitro and in vivo anti-thrombogenic effects. However, most studies lacked standard hemocompatibility assessment and comparison studies with current clinically used coatings, either heparin coatings or nonheparin coatings. Moreover, this review identifies that further investigation on the thrombo-resistance, stability and durability of coatings under rated flow conditions and the effects of coatings on the function of oxygenators (pressure drop and gas transfer) are needed. Therefore, extensive further development is required before these new coatings can be used in the clinic.

Bioresponsive starPEG-heparin hydrogel coatings on vascular stents for enhanced hemocompatibility

Hydrogel coatings can improve the biocompatibility of medical devices. However, stable surface bonding and homogeneity of hydrogel coatings are often challenging. This study exploits the benefits of biohybrid hydrogels of crosslinked four-armed poly(ethylene glycol) and heparin to enhance the hemocompatibility of cobalt‑chromium (CoCr) vascular stents. A bonding layer of dual silane and poly(ethylene-alt-maleic anhydride) (PEMA) treatment was applied to the stent to provide covalent immobilization and hydrophilicity for the homogeneous spreading of the hydrogel. A spray coating technology was used to distribute the aqueous solution of the reactive hydrogel precursors onto the sub-millimeter struts of the stents, where the solution polymerized to a homogeneous hydrogel film. The coating was mechanically stable on the stent after ethanol dehydration, and the stents could be stored in a dry state. The homogeneity and stability of the coating during stent expansion were verified. Quasistatic and dynamic whole blood incubation experiments showed substantial suppression of the pro-coagulant and inflammatory activity of the bare metal by the coating. Translation of the technology to industrial coating devices and future surface modification of stents with anti-inflammatory hydrogels are discussed.

A tailored extracellular matrix (ECM) - Mimetic coating for cardiovascular stents by stepwise assembly of hyaluronic acid and recombinant human type III collagen

Collagen, a central component of the extracellular matrix (ECM), has been widely applied in tissue engineering, among others, for wound healing or bone and nerve regeneration. However, the inherent thrombogenic properties of collagen hinder the application in blood-contacting devices. Herein, a brand-new recombinant human type III collagen (hCOLIII) was explored that does not present binding sites for platelets while retaining the affinity for endothelial cells. The hCOLIII together with hyaluronic acid (HA) were deposited on the substrates via layer-by-layer assembly to form an ECM-mimetic multilayer coating. In vitro platelet adhesion and ex vivo blood circulation tests demonstrated prominent thromboprotective properties for the hCOLIII-based ECM-mimetic coating. In addition, the coating effectively guided the vascular cell fate by supporting the proliferation of endothelial cells and inhibiting the proliferation of smooth muscle cells by differentiating them to a more contractile phenotype. A polylactic acid (PLA) stent coated with hCOLIII-based ECM-mimetic coating was implanted in the abdominal aorta of rabbits to investigate the healing of the neointima. The enhanced endothelialization, suppressed inflammatory response, inhibition of excessive neointimal hyperplasia, and the superior thromboprotection strongly indicated the prospect of the hCOLIII-based ECM-mimetic coating as a tailored blood-contacting material for cardiovascular stents.