Nasolacrimal stent with shape memory as an advanced alternative to silicone products

Surface Crystal and Degradability of Shape Memory Scaffold Essentialize Osteochondral Regeneration

The minimally invasive deployment of scaffolds is a key safety factor for the regeneration of cartilage and bone defects. Osteogenesis relies primarily on cell-matrix interactions, whereas chondrogenesis relies on cell-cell aggregation. Bone matrix expansion requires osteoconductive scaffold degradation. However, chondrogenic cell aggregation is promoted on the repellent scaffold surface, and minimal scaffold degradation supports the avascular nature of cartilage regeneration. Here, a material satisfying these requirements for osteochondral regeneration is developed by integrating osteoconductive hydroxyapatite (HAp) with a chondroconductive shape memory polymer (SMP). The shape memory function-derived fixity and recovery of the scaffold enabled minimally invasive deployment and expansion to fill irregular defects. The crystalline phases on the SMP surface inhibited cell aggregation by suppressing water penetration and subsequent protein adsorption. However, HAp conjugation SMP (H-SMP) enhanced surface roughness and consequent cell-matrix interactions by limiting cell aggregation using crystal peaks. After mouse subcutaneous implantation, hydrolytic H-SMP accelerated scaffold degradation compared to that by the minimal degradation observed for SMP alone for two months. H-SMP and SMP are found to promote osteogenesis and chondrogenesis, respectively, in vitro and in vivo, including the regeneration of rat osteochondral defects using the binary scaffold form, suggesting that this material is promising for osteochondral regeneration.

Biodegradable photo-crosslinked polycaprolactone/polydopamine elastomers with excellent light driven programmable shape memory and chemical degradation properties

Fabrication of biodegradable shape memory polymer with remotely controllable shape actuation is of great significance in the biomedical field but remains challenging. Herein, we present a simple strategy to fabricate a monolayer-based stretchable and mechanically robust polycaprolactone/polydopamine elastomer via efficient thiol-ene click chemistry. The resultant elastomers exhibit desirable photothermal transfer efficiency and can enable rapid temperature increase over the melting temperature of polymeric matrix, and quantitative results demonstrate that the crosslinked film exhibited excellent shape memory properties with shape fixity (Rf) and shape recovery ratios (Rr) approaching 92.3 % and 95.6 %, respectively. Combined with photo stimuli, anisotropic polymer chain relaxation of the prestretched film can generate asymmetric contractions and eventually give rise to ut out-of-plane bending actuations upon photo stimulation, meanwhile, numerical simulation reveals the interaction mechanism of light with film. Beyond this, we further demonstrate that the bending angle is correlated with the parameters of prestretch strain, film thickness as well as irradiation time, and the maximum value can reach 158° with prestretch strain of 200 % and film thickness of 0.3 mm. In particular, the bent structures could be reversibly deformed into plane state via photo-directed corresponding opposite surfaces. Remarkably, the in vitro degradation properties of the elastomers on PBS-T buffer solutions demonstrated that the degradation was composed of induction stage and acceleration stage. This work will pave way for designing biodegradable light-induced shape memory materials toward biomedical device fields and so on.

Two-electron oxidized polyphenol chemistry-inspired superhydrophilic drug-carrying coatings for the construction of multifunctional nasolacrimal duct stents

Nasolacrimal duct obstruction due to infection, inflammation, or excessive fibroblast proliferation may result in persistent tearing, intraocular inflammation, or even blindness. In this study, surface engineering techniques are applied to nasolacrimal duct stents for the first time. Based on the functioning of marine mussels, "one-pot" and "stepwise" methods were employed to construct a novel multifunctional superhydrophilic PDA/RAP coating using dopamine and rapamycin. Micron-sized rapamycin crystals combined with nano-sized polydopamine particles form a micro-nano topographical structure. Therefore, acting synergistically with in situ-generated hydrophilic groups (amino, carboxyl, and phenolic hydroxyl), they impart excellent and long-lasting superhydrophilicity to the nasolacrimal duct stent. The PDA/RAP coating effectively maintained the stability of the initial microenvironment during stent implantation by inhibiting the onset of acute inflammation and infection during the early stages of implantation. Meanwhile, the rapamycin crystals, supported by the superhydrophilic platform, exhibited a sustained-release capability that helped them to better exert their anti-inflammatory, antibacterial, and anti-fibroblast proliferative properties, ensuring conducive conditions for the rapid repair of nasolacrimal duct epithelial cells, verified by a series of experiments. In conclusion, the PDA/RAP hydrophilic coating has anti-inflammatory, antifibrotic, antibacterial, and antithrombotic properties, offering a new strategy to address restenosis following clinical nasolacrimal duct stent implantation.

Polymers and Biomaterials for Posterior Lamella of the Eyelid and the Lacrimal System

The application of biopolymers in the reconstruction of the posterior lamella of the eyelid and the lacrimal system marks a significant fusion of biomaterial science with clinical advancements. This review assimilates research spanning 2015 to 2023 to provide a detailed examination of the role of biopolymers in reconstructing the posterior lamella of the eyelid and the lacrimal system. It covers the anatomy and pathophysiology of eyelid structures, the challenges of reconstruction, and the nuances of surgical intervention. This article progresses to evaluate the current gold standards, alternative options, and the desirable properties of biopolymers used in these intricate procedures. It underscores the advancements in the field, from decellularized grafts and acellular matrices to innovative natural and synthetic polymers, and explores their applications in lacrimal gland tissue engineering, including the promise of 3D bioprinting technologies. This review highlights the importance of multidisciplinary collaboration between material scientists and clinicians in enhancing surgical outcomes and patient quality of life, emphasizing that such cooperation is pivotal for translating benchtop research into bedside applications. This collaborative effort is vital for restoring aesthetics and functionality for patients afflicted with disfiguring eyelid diseases, ultimately aiming to bridge the gap between innovative materials and their clinical translation.

Shape-Configurable Mesh for Hernia Repair by Synchronizing Anisotropic Body Motion

Continuous progress has been made in elucidating the relationship between material property, device design, and body function to develop surgical meshes. However, an unmet need still exists wherein the surgical mesh can handle the body motion and thereby promote the repair process. Here, the hernia mesh design and the advanced polymer properties are tailored to synchronize with the anisotropic abdominal motion through shape configuration. The thermomechanical property of shape configurable polymer enables molding of mesh shape to fit onto the abdominal structure upon temperature shift, followed by shape fixing with the release of the heat energy. The microstructural design of mesh is produced through finite element modeling to handle the abdominal motion efficiently through the anisotropic longitudinal and transverse directions. The design effects are validated through in vitro, ex vivo, and in vivo mechanical analyses using a self-configurable, body motion responsive (BMR) mesh. The regenerative function of BMR mesh leads to effective repair in a rat hernioplasty model by effectively handling the anisotropic abdomen motion. Subsequently, the device-tissue integration is promoted by promoting healthy collagen synthesis with fibroblast-to-myofibroblast differentiation. This study suggests a potential solution to promote hernia repair by fine-tuning the relationship between material property and mesh design.

Body-Shaping Membrane to Regenerate Breast Fat by Elastic Structural Holding

Tissue regeneration requires structural holding and movement support using tissue-type-specific aids such as bone casts, skin bandages, and joint protectors. Currently, an unmet need exists in aiding breast fat regeneration as the breast moves following continuous body motion by exposing the breast fat to dynamic stresses. Here, the concept of elastic structural holding is applied to develop a shape-fitting moldable membrane for breast fat regeneration ("adipoconductive") after surgical defects are made. The membrane has the following key characteristics: (a) It contains a panel of honeycomb structures, thereby efficiently handling motion stress through the entire membrane; (b) a strut is added into each honeycomb in a direction perpendicular to gravity, thereby suppressing the deformation and stress concentration upon lying and standing; and (c) thermo-responsive moldable elastomers are used to support structural holding by suppressing large deviations of movement that occur sporadically. The elastomer became moldable upon a temperature shift above T_m. The structure can then be fixed as the temperature decreases. As a result, the membrane promotes adipogenesis by activating mechanotransduction in a fat miniature model with pre-adipocyte spheroids under continuous shaking in vitro and in a subcutaneous implant placed on the motion-prone back areas of rodents in vivo.

Dilation-Responsive Microshape Programing Prevents Vascular Graft Stenosis

Shape memory materials have been successfully applied to minimally invasive implantation of medical devices. However, organ-movement-specific shape programing at a microscale level has never been demonstrated despite significant unmet needs. As vein-to-artery grafting induces vein dilation and stenosis, a polymeric self-enclosable external support (SES) is designed to wrap the vascular out-wall. Its micropores are programmed to increase sizes and interconnections upon dilation. Vessel dilation promotes venous maturation, but overdilation induces stenosis by disturbed blood flow. Therefore, the unique elastic shape-fixity of SES provides a foundation to enable a stable microscale shape transition by maintaining the vein dilation. The shape transition of micropore architecture upon dilation induces beneficial inflammation, thereby regenerating vasa vasorum and directing smooth muscle cell migration toward adventitia with the consequent muscle reinforcement of veins. This game-changer approach prevents the stenosis of vein-to-artery grafting by rescuing ischemic disorders and promoting arterial properties of veins.

Shape Memory Tube Plug for Fine-control of Intraocular Pressure by Glaucoma Devices

As a standard approach to treating glaucoma, a silicone tube device is inserted into the eye to drain water and thereby lower the intraocular pressure (IOP). However, the fixed diameter of the tube often results in too much initial water drain. Suture-sheaving of the outer tube wall also leads to random IOP drops over time. In this study, self-expansion of the inner tube diameter was achieved by inserting a shape memory tube into the silicone tube. The difference in controlling small to large IOP drops before and after tube diameter expansion was demonstrated via computational modeling, a flow pumping system, and rabbit experiments.