The fate of donor osteocytes in fine particulate bone powders during repair of bone defects in experimental rats

3D bioprinted autologous bone particle scaffolds for cranioplasty promote bone regeneration with both implanted and native BMSCs

Although autologous bone (AB) grafting is considered to be the gold standard for cranioplasty, unresolved problems remain, such as surgical-site infections and bone flap absorption. In this study, an AB scaffold was constructed via three-dimensional (3D) bedside-bioprinting technology and used for cranioplasty. To simulate the skull structure, a polycaprolactone shell was designed as an external lamina, and 3D-printed AB and a bone marrow-derived mesenchymal stem cell (BMSC) hydrogel was used to mimic cancellous bone for bone regeneration. Ourin vitroresults showed that the scaffold exhibited excellent cellular affinity and promoted osteogenic differentiation of BMSCs in both two-dimensional and 3D culture systems. The scaffold was implanted in beagle dog cranial defects for up to 9 months, and the scaffold promoted new bone and osteoid formation. Furtherin vivostudies indicated that transplanted BMSCs differentiated into vascular endothelium, cartilage, and bone tissues, whereas native BMSCs were recruited into the defect. The results of this study provide a method for bedside bioprinting of a cranioplasty scaffold for bone regeneration, which opens up another window for clinical applications of 3D printing in the future.

Using a mixture of local bone dust and morselized bone as graft materials in single- and double-level ACDF

Background

Using a cage filled with local bone in anterior cervical discectomy and fusion (ACDF) can eliminate morbidities associated with autograft harvest from the iliac crest while achieving high fusion rates. However, there is still no consensus regarding the methods for using local bone grafts. This retrospective study was performed to compare the clinical and radiological outcomes of using a mixture of bone dust and morselized bone versus morselized bone alone in ACDF.

Methods

A retrospective study of 228 patients affected by cervical degenerative disease who had undergone single- or double-level ACDF between January 2014 and June 2018 was performed. Nanohydroxyapatite/polyamide-66 (n-HA/PA66) combined with morselized bone was used in 111 patients (group A: single-level ACDF in 51 patients and double-level ACDF in 60 patients), whereas the n-HA/PA66 cage combined with a mixture of bone dust and morselized bone was used in 117 patients (group B: single-level ACDF in 58 patients and double-level ACDF in 59 patients). The fusion rate, extent of cage subsidence, fusion segmental height (FSH), C2-7 lordosis, segmental sagittal alignment (SSA), 10-point visual analog scale (VAS) score, and Neck Disability Index (NDI) were compared between the two groups.

Results

The VAS score and NDI were significantly reduced after the operation in group A and group B. At the final follow-up, the fusion rate was 90.2 % (46/51) and 94.8 % (55/58) in patients treated with single-level ACDF in group A and group B, respectively (p > 0.05). In patients treated with double-level ACDF, bone fusion was achieved in 52 patients (86.7 %) in group A and 55 patients (93.2 %) in group B (p > 0.05). The fusion rate of single- and double-level ACDF was higher in patients in group B than those in group A at the 3-month, 6-month and 12-month follow-ups (p < 0.05). The extent of cage subsidence after single- and double-level ACDF was lower in patients in group B (1.5 ± 0.5 mm and 2.3 ± 0.8 mm, respectively) than in those in group A (1.8 ± 0.7 mm and 2.9 ± 1.4 mm, respectively) (p < 0.05). There was no significant difference between the two groups in the C2-7 lordosis, FSH, SSA, VAS score, or NDI before or after the operation (p > 0.05).

Conclusions

Using a mixture of local bone dust and morselized bone as cage-filling materials yielded comparably good clinical outcomes as using morselized bone alone in single- and double-level ACDF. However, the mixture graft of bone dust and morselized bone was more beneficial in promoting early fusion and reducing cage subsidence.

Autogenous bone particles combined with platelet-rich plasma can stimulate bone regeneration in rabbits

Long-term bone defects are a key clinical problem. Autogenous bone graft remains the gold standard for the treatment of these defects; however, improving the osteogenic properties and reducing the amount of autogenous bone is challenging. Autologous platelet-rich plasma (PRP) has been widely considered for treatment, due to its potentially beneficial effect on bone regeneration and vascularization. The aim of the present study was to explore the effects of autogenous bone particles combined with PRP on repairing segmental bone defects in rabbits. Briefly, a critical-size diaphyseal radius defect was established in 45 New Zealand White rabbits. Animals were randomly divided into four groups, according to the different implants: Group A, empty bone defect; group B, PRP; group C, autogenous bone particles + bone mesenchymal stem cells (BMSCs) on the left radius; group D, autogenous bone particles + PRP + BMSCs on the right radius. Bone samples were collected and further analyzed using X-ray, histology and histomorphometry 4, 8 and 12 weeks post-surgery. In addition, the effect of PRP on cell proliferation was detected by Cell Counting Kit-8 and the concentrations of growth factors (GFs), transforming GF (TGF)-β1 and platelet-derived GF (PDGF), in PRP were verified by ELISA. X-ray, histology and histomorphometry data revealed that the fraction area of the newly formed bone was larger in group D. In addition, PRP could improve cell proliferation, osteogenic differentiation and the release of GFs, TGF-β1 and PDGF-AB. In conclusion, these findings indicated that an autogenous bone particle + PRP + BMSC scaffold may be used as a potential treatment strategy for segmental defects in humans.

A novel tissue-engineered bone graft composed of silicon-substituted calcium phosphate, autogenous fine particulate bone powder and BMSCs promotes posterolateral spinal fusion in rabbits

Background

Autogenous bone graft is the gold standard bone grafting substrate available in spinal fusion because of its osteoconductive, osteogenic, and osteoinductive properties. However, several shortcomings including bleeding, infection, chronic pain, and nerve injury are known to be associated with the procedure. Bone tissue engineering has emerged as an alternative therapeutic strategy for bone grafts. New materials have been developed and tested that can substitute for the autogenous bone grafts used in the spinal fusion. The purpose of this study is to evaluate the role of a novel tissue-engineered bone graft with silicon-substituted calcium phosphate (Si-CaP), autogenous fine particulate bone powder (AFPBP), and bone marrow mesenchymal stem cells (BMSCs) using a rabbit posterolateral lumbar fusion model based on bone tissue engineering principles. The application of this graft can represent a novel choice for autogenous bone to reduce the amount of autogenous bone and promote spinal fusion.

Methods

BMSCs from New Zealand white rabbits were isolated and cultured in vitro. Then, BMSCs were marked by the cell tracker chloromethyl-benzamidodialkylcarbocyanine (CM-Dil). A total of 96 New Zealand White rabbits were randomly divided into four groups: (a) AFPBP, (b) Si-CaP, (c) Si-CaP/AFPBP, (d) Si-CaP/AFPBP/BMSCs.The rabbits underwent bilateral posterolateral spine arthrodesis of the L5-L6 intertransverse processes using different grafts. Spinal fusion and bone formation were evaluated at 4, 8, and 12 weeks after surgery by manual palpation, radiology, micro-computed tomography (micro-CT), histology, and scanning electronic microscopy (SEM).

Results

The rate of fusion by manual palpation was higher in the Si-CaP/AFPBP/BMSCs group than the other groups at 8 weeks. The fusion rates in the Si-CaP/AFPBP/BMSCs and the AFPBP groups both reached 100%, which was higher than the Si-CaP/AFPBP group (62.5%) (P ​> ​0.05) and Si-CaP group (37.5%) (P ​< ​0.05) at 12 weeks. New bone formation was observed in all groups after implantation by radiology and micro-CT. The radiographic and CT scores increased in all groups from 4 to 12 weeks, indicating a time-dependent osteogenetic process. The Si-CaP/AFPBP/BMSCs group showed a larger amount of newly formed bone than the Si-CaP/AFPBP and Si-CaP groups at 12 weeks. Bone formation in the Si-CaP/AFPBP/BMSCs group was similar to the AFPBP group. Histology showed that new bone formation continued and increased along with the degradation and absorption of Si-CaP and AFPBP from 4 to 12 weeks in the Si-CaP, Si-CaP/AFPBP, and Si-CaP/AFPBP/BMSCs groups. At 4 weeks, a higher proportion of bone was detected in the AFPBP group (23.49%) compared with the Si-CaP/AFPBP/BMSCs group (14.66%, P ​< ​0.05). In the Si-CaP/AFPBP/BMSCs group at 8 weeks, the area percentage of new bone formation was 28.56%, which was less than the AFPBP group (33.21%, P ​< ​0.05). No difference in bone volume was observed between the Si-CaP/AFPBP/BMSCs group (44.39%) and AFPBP group (45.06%) at 12 weeks (P ​> ​0.05). At 12 weeks, new trabecular were visible in the Si-CaP/AFPBP/BMSCs group by SEM. CM-Dil-positive cells were observed at all stages. Compared with histological images, BMSCs participate in various stages of osteogenesis by transforming into osteoblasts, chondrocytes, and osteocytes.

Conclusion

This study demonstrated for the first time that Si-CaP/AFPBP/BMSCs is a novel tissue-engineered bone graft with excellent bioactivity, biocompatibility, and biodegradability. The graft could reduce the amount of autogenous bone and promote spinal fusion in a rabbit posterolateral lumbar fusion model, representing a novel alternative to autogenous bone.

The Translational potential of this article

The translational potential of this article lies in that this graft will be a novel spinal fusion graft with great potential for clinical applications.

The influence of broach design on bone friction and osseodensification in total hip arthroplasty

BACKGROUND

The process of cavity preparation by broaching has an impact on the primary stability of uncemented hip stems and on the periprosthetic fracture risk. Osseodensifying broaches may increase primary stability, but have the potential to raise cortex strains and facilitate fracture. The aim of this study was to determine the influence of broach design on the forces acting during broaching, on the microstructure of the broached bone bed and the amount and depth of osseodensification.

METHODS

Broach models representing compaction, blunt extraction and sharp extraction broaches, were used for quasi-static simulation of femoral cavity preparation on bovine trabecular bone cuboids. Broaching forces were measured and micro-computed tomography scans performed prior and after testing. Friction coefficients during broaching, bone densification parameters and size of the debris particles pushed into the bone were determined.

FINDINGS

Friction coefficients during sharp extraction exceeded those during compaction and blunt extraction broaching (by 38% and 37%, P < .001). Total bone densification was enhanced for compaction and blunt extraction compared to sharp extraction broaching (increase of 121% and 117%, P = .005), resulting from higher densification depths for compaction (P = .001) and higher maximum densification for blunt extraction broaching (P = .008), with the latter producing fewer large particles than compaction broaching (P = .005).

INTERPRETATION

Higher friction coefficients indicate a decreased periprosthetic fracture risk with sharp extraction broaches for equal implantation forces. The blunt extraction and compaction designs investigated densified the bone to a similar extent. Blunt extraction broaching may support better osseointegration due to smaller bone debris particles.

Autogenous bone particle/titanium fiber composites for bone regeneration in a rabbit radius critical-size defect model

PURPOSE

To explore the effects of autogenous bone particle/titanium fiber composites on repairing segmental bone defects in rabbits.

MATERIALS AND METHODS

A model of bilateral radial bone defect was established in 36 New Zealand white rabbits which were randomly divided into 3 groups according to filling materials used for bilaterally defect treatment: in group C, 9 animal bone defect areas were prepared into simple bilateral radius bone defect (empty sham) as the control group; 27 rabbits were used in groups ABP and ABP-Ti. In group ABP, left defects were simply implanted with autogenous bone particles; meanwhile, group ABP-Ti animals had right defects implanted with autogenous bone particle/titanium fiber composites. Animals were sacrificed at 4, 8, and 12 weeks, respectively, after operation.

RESULTS

Micro-CT showed that group C could not complete bone regeneration. Bone volume to tissue volume values in group ABP-Ti were better than group ABP. From histology and histomorphometry Groups ABP and ABP-Ti achieved bone repair, the bone formation of group ABP-Ti was better. The mechanical strength of group ABP-Ti was superior to that of other groups.

CONCLUSIONS

These results confirmed the effectiveness of autologous bone particle/titanium fiber composites for promoting bone regeneration and mechanical strength.

Development and performance analysis of Si-CaP/fine particulate bone powder combined grafts for bone regeneration

Background

Although autogenous bone grafts as well as several bone graft substitute material have been used for some time, there is high demand for more efficient and less costly bone-substitute materials. Silicon-substituted calcium phosphates (Si-CaP) and fine particulate bone powder (FPBP) preparations have been previously shown to individually possess many of the required features of a bone graft substitute scaffold. However, when applied individually, these two materials fall short of an ideal substitute material. We investigated a new concept of combining Si-CaP with FPBP for improved performance in bone-repair.

Methods

We assessed Si-CaP/FPBP combined grafts in vitro, by measuring changes in pH, weight loss, water absorption and compressive strength over time.

Results

Si-CaP/FPBP combined grafts was found to produce conditions of alkaline pH levels compared to FPBP, and scaffold surface morphology conducive to bone cell adhesion, proliferation, differentiation, tissue growth and transport of nutrients, while maintaining elasticity and mechanical strength and degradation at a rate closer to osteogenesis.

Conclusion

Si-CaP/FPBP combined grafts was found to be superior to any of the two components individually.

A comparison of osteocyte bioactivity in fine particulate bone powder grafts vs larger bone grafts in a rat bone repair model

The osteogenic potential for bone grafts is based on numbers and activities of cells that survive transplantation. In this study, we compared the bioactivity of osteocytes in 300-500 μm fine particulate bone powder grafts to 2 mm larger bone grafts in a rat radial defect model. Expression levels of bone morphogenetic protein-2 (BMP-2), transforming growth factor-beta 1 (TGF-β1), alkaline phosphatase (ALP), and collagen I were semi-quantified by both immunohistochemistry and RT-PCR at days 1 and 4, as well as weeks 1, 2, 4, 6 and 10 post-transplantation. Within two weeks post-transplantation, more cells stained positively for BMP-2, TGF-β1, ALP, and collagen I within the bone grafts and in the surrounding tissues in the group transplanted with the fine particulate bone powder grafts than in those with larger bone grafts (P<0.05). The mRNA levels of all four markers in the group transplanted with fine particulate bone powder graft peaked earlier and were expressed more highly than in the larger bone graft group, suggesting that fine particulate bone powder grafts provide more viable and active osteocytes to accelerate bone defect healing than larger bone grafts.