Two-visit placement of immediate dentures with the aid of digital technologies

Current applications of 3D printing in dental implantology: A scoping review mapping the evidence

OBJECTIVES

This scoping review aimed to identify the available evidence in the use of 3D printing technology in dental implantology. Due to the broad scope of the subject and its application in implantology, three main areas of focus were identified: (1) customized dental implants, (2) manufacturing workflow for surgical implant guides, and (3) related implant-supported prostheses factors, which include the metallic primary frameworks, secondary ceramic or polymer superstructures, and 3D implant analog models.

MATERIALS AND METHODS

Online databases (Medline, Cochrane, Embase, and CINAHL) were used to identify the studies published up to February 2023 in English. Two experienced reviewers performed independently the screening and selection among the 1737 studies identified. The articles evaluated the additive manufacturing (AM) technology, materials, printing, and post-processing parameters regarding dental implantology.

RESULTS

The 132 full-text studies that met the inclusion criteria were examined. Thirteen studies of customized dental implants, 22 studies about the workflow for surgical implant guides, and 30 studies of related implant-supported prostheses factors were included.

CONCLUSIONS

(1) The clinical evidence about AM titanium and zirconia implants is scarce. Early data on survival rates, osseointegration, and mechanical properties are being reported. (2) 3D printing is a proven manufacturing technology to produce surgical implant guides. Adherence to the manufacturer's instructions is crucial and the best accuracy was achieved using MultiJet printer. (3) The quality of 3D printed prosthetic structures and superstructures is improving remarkably, especially on metallic alloys. However, better marginal fit and mechanical properties can be achieved with milling technology for metals and ceramics.

Effect of layer thickness, build angle, and viscosity on the mechanical properties and manufacturing trueness of denture base resin for digital light processing

OBJECTIVES

To investigate effects of layer thickness, build angle, and viscosity on the mechanical properties and trueness of denture base resins used for digital light processing (DLP).

METHODS

Two denture base resins for DLP in different viscosity (high and low) were tested by using two manufacturing parameters:1) layer thickness (LT) (50- or 100-μm) and 2) build angle (BA) (0-, 45-, and 90-degree). disk- and bar-shaped specimens were used to evaluate hardness and flexural strength, respectively. Denture base specimens were used to examine trueness, and the deviation was calculated as the root mean square. Three-way analysis of variance (ANOVA) was conducted to determine the interaction among the three factors (viscosity, LT, and BA). Statistical significance was set at P < .05.

RESULTS

Effects of LT and BA on hardness differed according to viscosity, with significant interactions among three factors (P=.027). Regardless of LT or BA, the low-viscosity group had higher hardness than the high-viscosity group (P<.001). In terms of flexural strength, no significant interaction was detected between the factors (P=.212), however, the effects of LT and BA were significant (P=.003 and P<.001, respectively). Regarding trueness, a significant interaction was observed between viscosity and BA (P=.001). Low-viscosity group had higher trueness than high-viscosity group when the 45- and 90-degree BA were applied (P<.001).

CONCLUSIONS

LT and BA significantly affected the mechanical properties and trueness of the 3DP denture base, depending on the viscosity. For hardness and trueness, using low-viscosity resin and manufacturing with 50-μm LT and 45-degree BA are recommended.

CLINICAL SIGNIFICANCE

Resin viscosity affects the influence of LT and BA on the hardness, flexural strength, and trueness of DLP-generated denture bases. A 50-μm LT and 45-degree BA can be used with a low-viscosity resin to fabricate denture bases with higher hardness and trueness.

An analog-digital hybrid technique for immediate dentures with idealized border extensions

In patients with severe tooth mobility, conventional impression making can be challenging because of the risk of accidental tooth extraction. Digital intraoral scanning avoids such a complication but does not capture optimal border extensions for a complete denture. This clinical report presents a combined digital and analog recording technique which allows the recording of optimal vestibular border extensions without the risk of tooth extraction.

Clinical Applications of Intraoral Scanning in Removable Prosthodontics: A Literature Review

PURPOSE

This review aimed to identify the reported intraoral scanning applications in fabricating different types of removable prostheses in the field of prosthodontics.

METHODS

A comprehensive electronic search was performed using the PubMed and MEDLINE databases. This review included in vitro studies and clinical reports published between January 2013 and March 2021. The main keywords were as follows: intraoral scanning, digital impression, computerized digital impression, removable prosthesis, chairside computer-aided design/computer-assisted manufacturing, digital complete denture, digital immediate complete denture, digital interim complete denture, digital removable partial denture, digital removable overdenture, digital obturator, digital occlusal splints, and digital maxillofacial prostheses.

RESULTS

In total, 33 papers (22 clinical reports, 8 papers focused on dental techniques, and 3 clinical studies) were included in the final analysis.

CONCLUSIONS

The efficiency of using intraoral scanning in the field of removable prosthodontics was documented. However, there is a need for more clinical studies to identify intraoral scanning-usage protocols and to yield reliable and valid data.

CAD-CAM immediate to definitive complete denture transition: A digital dental technique

The present article describes a digital workflow for the fabrication of definitive complete dentures in 2 appointments by reproducing the cameo surface and tooth arrangement of computer-aided design and computer-aided manufacturing (CAD-CAM) immediate dentures. This straightforward technique, which requires limited time and effort, can be easily applied by using an intraoral scanner, a dental CAD software program, and a milling machine.