Sustained release veterinary parenteral products

Bayesian estimation in veterinary pharmacology: A conceptual and practical introduction

Sophisticated mathematical and computational tools have become widespread and important in veterinary pharmacology. Although the theoretical basis and practical applications of these have been widely explored in the literature, statistical inference in the context of these models has received less attention. Optimization methods, often with frequentist statistical inference, have been predominant. In contrast, Bayesian statistics have not been widely applied, but offer both practical utility and arguably greater interpretability. Veterinary pharmacology applications are generally well supported by relevant prior information, from either existing substantive knowledge, or an understanding of study and model design. This facilitates practical implementation of Bayesian analyses that can take advantage of this knowledge. This essay will explore the specification of Bayesian models relevant to veterinary pharmacology, including demonstration of prior selection, and illustrate the capability of these models to generate practically useful statistics, including uncertainty statements, that are difficult or impossible to obtain otherwise. Case studies using simulated data will describe applications in clinical trials, pharmacodynamics, and pharmacokinetics, all including multilevel modeling. This content may serve as a suitable starting point for researchers in veterinary pharmacology and related disciplines considering Bayesian estimation for their applied work.

Review on novel targeted enzyme drug delivery systems: enzymosomes

The goal of this review is to present enzymosomes as an innovative means for site-specific drug delivery. Enzymosomes make use of an enzyme's special characteristics, such as its capacity to accelerate the reaction rate and bind to a particular substrate at a regulated rate. Enzymosomes are created when an enzyme forms a covalent linkage with a liposome or lipid vesicle surface. To construct enzymosomes with specialized activities, enzymes are linked using acylation, direct conjugation, physical adsorption, and encapsulation techniques. By reducing the negative side effects of earlier treatment techniques and exhibiting efficient medication release, these cutting-edge drug delivery systems improve long-term sickness treatments. They could be a good substitute for antiplatelet medication, gout treatment, and other traditional medicines. Recently developed supramolecular vesicular delivery systems called enzymosomes have the potential to improve drug targeting, physicochemical characteristics, and ultimately bioavailability in the pharmaceutical industry. Enzymosomes have advantages over narrow-therapeutic index pharmaceuticals as focusing on their site of action enhances both their pharmacodynamic and pharmacokinetic profiles. Additionally, it reduces changes in normal enzymatic activity, which enhances the half-life of an enzyme and accomplishes enzyme activity on specific locations.

Role of Modeling and Simulation in Preclinical and Clinical Long-Acting Injectable Drug Development

Innovations in the field of long-acting injectable drug development are increasingly being reported. More advanced in vitro and in vivo characterization can improve our understanding of the injection space and aid in describing the long-acting injectable (LAI) drug's behavior at the injection site more mechanistically. These innovations may enable unlocking the potential of employing a model-based framework in the LAI preclinical and clinical space. This review provides a brief overview of the LAI development process before delving deeper into the current status of modeling and simulation approaches in characterizing the preclinical and clinical LAI pharmacokinetics, focused on aqueous crystalline suspensions. A closer look is provided on in vitro release methods, available biopharmaceutical models and reported in vitro/in vivo correlations (IVIVCs) that may advance LAI drug development. The overview allows identifying the opportunities for use of model-informed drug development approaches and potential gaps where further research may be most warranted. Continued investment in improving our understanding of LAI PK across species through translational approaches may facilitate the future development of LAI drug products.

A Retrospective Analysis of Preclinical and Clinical Pharmacokinetics from Administration of Long-Acting Aqueous Suspensions

Administration of long-acting injectable suspensions is an increasingly common approach to increasing patient compliance and improving therapeutic efficacy through less frequent dosing. While several long-acting suspensions have recently been marketed, parameters modulating drug absorption from suspension-based formulations are not well understood. Further, methods for predicting clinical pharmacokinetic data from preclinical studies are not well established. Together, these limitations hamper compound selection, formulation design and formulation selection through heavy reliance on iterative optimization in preclinical and clinical studies. This article identifies key parameters influencing absorption from suspension-based formulations through compilation and analysis of preclinical and clinical pharmacokinetic data of seven compounds marketed as suspensions; achievable margins for predicting the clinical dose and input rate from preclinical studies as a function of the preclinical species, the clinical injection location and the intended therapeutic duration were also established.

Current State and Opportunities with Long-acting Injectables: Industry Perspectives from the Innovation and Quality Consortium "Long-Acting Injectables" Working Group

Long-acting injectable (LAI) formulations can provide several advantages over the more traditional oral formulation as drug product opportunities. LAI formulations can achieve sustained drug release for extended periods of time, which results in less frequent dosing requirements leading to higher patient adherence and more optimal therapeutic outcomes. This review article will provide an industry perspective on the development and associated challenges of long-acting injectable formulations. The LAIs described herein include polymer-based formulations, oil-based formulations, and crystalline drug suspensions. The review discusses manufacturing processes, including quality controls, considerations of the Active Pharmaceutical Ingredient (API), biopharmaceutical properties and clinical requirements pertaining to LAI technology selection, and characterization of LAIs through in vitro, in vivo and in silico approaches. Lastly, the article includes a discussion around the current lack of suitable compendial and biorelevant in vitro models for the evaluation of LAIs and its subsequent impact on LAI product development and approval.

Long-Acting Opioid Analgesics for Acute Pain: Pharmacokinetic Evidence Reviewed

Long-acting injectable (LAI) opioid formulations mitigate the harm profiles and management challenges associated with providing effective analgesia for animals. A single dose of a long-acting opioid analgesic can provide up to 72 h of clinically relevant pain management. Yet, few of these new drugs have been translated to products for veterinary clinics. Regulatory pathways allow accelerated drug approvals for generic and biosimilar drugs. These pathways depend on rigorous evidence for drug safety and pharmacokinetic evidence demonstrating bioequivalence between the new and the legacy drug. This report reviews the animal PK data associated with lipid and polymer-bound buprenorphine LAI formulations. Buprenorphine is a widely used veterinary opioid analgesic. Because of its safety profile and regulatory status, buprenorphine is more accessible than morphine, methadone, and fentanyl. This review of PK studies coupled with the well-established safety profile of buprenorphine suggests that the accelerated approval pathways may be available for this new family of LAI veterinary pharmaceuticals.

Effect of particle size on in vivo performances of long-acting injectable drug suspension

Herein, entecavir-3-palmitate (EV-P), an ester prodrug of entecavir (EV), was employed as a model drug, and the effect of drug particle size on in vivo pharmacokinetic profiles and local inflammatory responses, and those associations were evaluated following intramuscular (IM) injection. EV-P crystals with different median diameters (0.8, 2.3, 6.3, 15.3 and 22.6 μm) were prepared using the anti-solvent crystallization method, with analogous surface charges (-10.7 ~ -4.7 mV), and crystallinity (melting point, 160-170 °C). EV-P particles showed size-dependent in vitro dissolution profiles under sink conditions, exhibiting a high correlation between the median diameter and Hixon-Crowell's release rate constant (r² = 0.94). Following IM injection in rats (1.44 mg/kg as EV), the pharmacokinetic profile of EV exhibited marked size-dependency; 0.8 μm-sized EV-P particles about 1.6-, 3.6-, and 5.6-folds higher systemic exposure, compared to 6.3, 15.3, and 22.6 μm-sized particles, respectively. This pharmacokinetic pattern, depending on particle size, was also highly associated with histopathological responses in the injected tissue. The smaller EV-P particles (0.8 or 2.3 μm) imparted the larger inflammatory lesion after 3 days, lower infiltration of inflammatory cells, and thinner fibroblastic bands around depots after 4 weeks. Conversely, severe fibrous isolation with increasing particle size augmented the drug remaining at injection site over 4 weeks, impeding the dissolution and systemic exposure. These findings regarding the effects of formulation variable on the in vivo behaviors of long-acting injectable suspension, provide constructive knowledge toward the improved design in poorly water-soluble compounds.

Impact of jet pulverization and wet milling techniques on properties of aripiprazole long-acting injection and absorption mechanism research in vivo

This study aims to explore the influence of wet milling and jet pulverization on the aripiprazole microcrystalline long-acting injection. Crystal form and particle size distribution were taken as inspection indicators in vitro, and process parameters were optimized. The formulation prepared by wet milling (AMLAI-WM) was shown to undergo a slight conversion of crystal form by DSC, PXRD, TG, FT-IR and have a wider particle size distribution with D50 and Span values of 2.967 μm and 3.457 compared to the formulation fabricated by jet pulverization (AMLAI-JP) with 2.887 μm and 2.258 respectively. In addition, the in vitro release of AMLAI-WM was faster, whereby the pharmacokinetic data indicated that AMLAI-WM was absorbed more quickly within five days with AUC_0-5d of 5243.7 μg·L^-1·h and 4818.28 μg·L^-1·h, respectively. Furthermore, no statistically significant differences in C_max, t_max and AUC between AMLAI-JP and the commercial formulation (Abilify Maintena™) were found. The absorption mechanism was studied and showed a 1.4-fold later T_max after depletion of macrophages and significantly lower C_max and AUC after inhibiting angiogenesis, indicating inflammatory granuloma could facilitate drug plasma exposure. Overall, we demonstrated that jet pulverization was a good strategy for long-acting microcrystalline injection, and that the absorption behavior was affected by both particle size distribution and inflammatory granuloma.

Rational Pharmacotherapy in Infectious Diseases: Issues Related to Drug Residues in Edible Animal Tissues

Drugs are used in veterinary medicine to prevent or treat animal diseases. When rationally administered to livestock following Good Veterinary Practices (GVP), they greatly contribute to improving the production of food of animal origin. Since humans can be exposed chronically to veterinary drugs through the diet, residues in food are evaluated for effects following chronic exposures. Parameters such as an acceptable daily intake (ADI), the no-observed-adverse-effect level (NOAEL), maximum residue limits (MRLs), and the withdrawal periods (WPs) are determined for each drug used in livestock. Drug residues in food exceeding the MRLs usually appear when failing the GVP application. Different factors related either to the treated animal or to the type of drug administration, and even the type of cooking can affect the level of residues in edible tissues. Residues above the MRLs can have a diverse negative impact, mainly on the consumer's health, and favor antimicrobial resistance (AMR). Drug residue monitoring programmes are crucial to ensure that prohibited or authorized substances do not exceed MRLs. This comprehensive review article addresses different aspects of drug residues in edible tissues produced as food for human consumption and provides relevant information contributing to rational pharmacotherapy in food-producing animals.

A comparative pharmacokinetic study of a novel sustained release danofloxacin formulation and the conventional product in rabbits

Sustained release drug formulations are frequently developed to reduce dosage frequency and to improve outcomes of drug therapy. This study evaluates the pharmacokinetic (PK) parameters of a novel injectable danofloxacin (DANO) formulation in comparison with a conventional product in an animal model. A recently synthesized DANO formulation, prepared by incorporation of DANO-loaded mesoporous silica nanoparticles in liposomes and integration of liposomes in chitosan and β-glycerophosphate solution (lipogel) along with the conventional DANO product were injected subcutaneously (SC) in rabbits. Blood samples were collected at specific time points and DANO concentrations in plasma samples were measured. The PK parameters including maximum concentration (Cmax), time to reach Cmax (Tmax), area under the concentration versus time curves (AUC), area under the first moment concentration-time curve (AUMC) and mean residence time (MRT) were studied by non-compartmental analyses. The values of MRT (156.00 ± 20.00 hr), AUC (15.30 ± 3.00 µg mL^-1 per hr) and Tmax (4.70 ± 1.60 hr) for lipogel formulation were higher than those of the conventional product (8.50 ± 3.60 hr, 3.70 ± 2.00 µg mL^-1 per hr and 0.80 ± 0.26 hr, respectively). However, Cmax values for lipogel formulation (0.41 ± 0.15 µg mL^-1) were significantly lower than those of the conventional drug product (0.68 ± 0.09 µg mL^-1). It was concluded that the novel DANO lipogel effectively slowed down the drug absorption and the incorporation of liposomes in hydrogel could be a useful approach to maintain the therapeutic drug level for a longer period; however, more studies are needed in this field.

Polymeric-based drug delivery systems for veterinary use: State of the art

One of the challenges to the success of veterinary pharmacotherapy is the limited number of drugs and dosage forms available exclusively to this market, due to the interspecies variability of animals, such as anatomy, physiology, pharmacokinetics, and pharmacodynamics. For this reason, studies in this area have become a highlight, since they are still scarce in comparison with those on human drug use. To overcome many limitations related to the bioavailability, efficacy, and safety of pharmacotherapy in animals, especially livestock and domestic animals, polymers-based drug delivery systems are promising tools if they guarantee greater selectivity and less toxicity in dosage forms. In addition, these tools may be developed according to the great interspecies variability. To contribute to these discussions, this paper provides an updated review of the major polymer-based drug delivery systems projected for veterinary use. Traditional and innovative drug delivery systems based on polymers are presented, with an emphasis on films, microparticles, micelles, nanogels, nanoparticles, tablets, implants and hydrogel-based drug delivery systems. We discuss important concepts for the veterinarian about the mechanisms of drug release and, for the pharmacist, the advantages in the development of pharmaceutical forms for the animal population. Finally, challenges and opportunities are presented in the field of pharmaceutical dosage forms for veterinary use in response to the interests of the pharmaceutical industry.

Nano Co-Crystal Embedded Stimuli-Responsive Hydrogels: A Potential Approach to Treat HIV/AIDS

Currently, the human immunodeficiency virus (HIV) that causes acquired immunodeficiency syndrome (AIDS) can only be treated successfully, using combination antiretroviral (ARV) therapy. Lamivudine (3TC) and zidovudine (AZT), two compounds used for the treatment of HIV and prevention of disease progression to AIDS are used in such combinations. Successful therapy with 3TC and AZT requires frequent dosing that may lead to reduced adherence, resistance and consequently treatment failure. Improved toxicity profiles of 3TC and AZT were observed when combined as a nano co-crystal (NCC). The use of stimuli-responsive delivery systems provides an opportunity to overcome the challenge of frequent dosing, by controlling and/or sustaining delivery of drugs. Preliminary studies undertaken to identify a suitable composition for a stimulus-responsive in situ forming hydrogel carrier for 3TC-AZT NCC were conducted, and the gelation and erosion time were determined. A 25% w/w Pluronic® F-127 thermoresponsive hydrogel was identified as a suitable carrier as it exhibited a gelation time of 5 min and an erosion time of 7 days. NCC-loaded hydrogels were evaluated using in vitro dissolution and cytotoxicity assays. In vitro dissolution undertaken using membrane-less diffusion over 168 h revealed that 3TC and AZT release from NCC-loaded hydrogels was complete and followed zero-order kinetic processes, whereas those loaded with the micro co-crystal and physical mixture were incomplete and best described using the Korsmeyer-Peppas kinetic model. The release of AZT and 3TC from the physical mixture and MCC-loaded gel exhibited a value for n of 0.595 for AZT release from the physical mixture and 0.540 for the MCC technology, whereas the release exponent for 3TC was 0.513 for the physical mixture and 0.557 for the MCC technology indicating that diffusion and erosion controlled 3TC and AZT release. In vitro cytotoxicity assay data revealed that the addition of NCC to the thermoresponsive hydrogel resulted in an improved cell viability of 88.0% ± 5.0% when compared to the cell viability of the NCC of 76.9% ± 5.0%. The results suggest that the use of a thermoresponsive nanosuspension may have the potential to be delivered as an intramuscular injection that can subsequently increase bioavailability and permit dose reduction and/or permit use of a longer dosing frequency.

Spray congealed solid lipid microparticles as a sustained release delivery system for Gonadorelin [6-D-Phe]: Production, optimization and in vitro release behavior

Sustained release lipid microparticles for a potential veterinary application were produced by the means of spray congealing using saturated triglycerides with respective surfactants. The spray congealing process was optimized using unloaded and loaded microparticles, revealing the highest impact of the spray flow on material loss. Yield could be optimized by increasing the spray flow as well as a reduction of the melt temperature from 90 to 75 °C. For the delivery system developed in this study, a release of around 15 days was targeted. The release profile was in first hand determined with the use of model substances (aspartame and tryptophan), before incorporating the decapeptide Gonadorelin [6-D-Phe]. Release could be controlled between 2 and 28 d, which was dependent on stability of microparticles upon incubation, type and concentration of emulsifier, as well as the used triglyceride. Differential scanning calorimetry and X-ray powder diffraction confirmed the crystallization behavior of C14 and C16-triglycerides in combination with various emulsifiers in different modification without impact on release.

RETROSPECTIVE EVALUATION OF A NOVEL SUSTAINED-RELEASE IVERMECTIN VARNISH FOR TREATMENT OF WOUND MYIASIS IN ZOO-HOUSED ANIMALS

Myiasis is a major disease condition in human and veterinary medicine. Domestic, free-ranging, and zoo-housed animals can be severely affected by myiasis. Depending on case severity, multiple treatment episodes may be indicated and can lead to recurrent capturing, handling stress, and anesthetics, all of which increase the risk of adverse responses (including death) individually and also in the herd. As an insecticide, ivermectin is often used for larval control. A total of 28 individual myiasis cases were retrospectively evaluated, out of which 11 cases were also treated using an ivermectin sustained-release varnish (SRV). The clinical outcome of all cases was assessed and the results suggest that the use of a topical ivermectin SRV (with or without concurrent injectable ivermectin) can reduce handling and treatments, has no adverse effects, and has minimal recurrence of the disease when compared with cases treated without it.

Design and in vivo evaluation of entecavir-3-palmitate microcrystals for subcutaneous sustained delivery

The objectives of this study were to formulate microcrystals of entecavir-3-palmiate (EV-P), a palmitic acid ester of entecavir (EV), and evaluate the influence of particle size on its pharmacokinetic behavior following subcutaneous (SC) injection. Systemic toxicity and local tolerability of the hepatitis B anti-viral suspension were further evaluated in normal rats. EV-P microcrystals possessing median diameters of 2.1, 6.3, and 12.7 µm were fabricated using anti-solvent crystallization technique with polysorbate 20 and polyethylene glycol 4000 as steric stabilizer. Dissolution rate of EV-P microcrystals was controlled by adjusting the particle size, under sink condition. Pharmacokinetic profiles of 2.1 µm-sized and 6.3 µm-sized EV-P microcrystals were quite comparable (1.44 mg/kg as EV), over 46 days in rats. The absorption rate and extent of EV after SC injection of 12.7 µm-sized microcrystals were significantly retarded, due to its slower dissolution rate in aqueous media. No single-dose systemic toxicity was observed after SC injection of high dose of EV-P microcrystal suspension (30-300 mg/kg as EV). The microcrystals were tolerable in the injected site, showing mild inflammatory responses at a dose of 30 mg/kg. Therefore, the novel microcrystal system with median particle size of below 6.3 µm is expected to be a unique long-acting system of the anti-viral agent, improving patient's compliance with chronic disease.

Development of a Convenient In Vitro Gel Diffusion Model for Predicting the In Vivo Performance of Subcutaneous Parenteral Formulations of Large and Small Molecules

Parenteral delivery remains a compelling drug delivery route for both large- and small-molecule drugs and can bypass issues encountered with oral absorption. For injectable drug products, there is a strong patient preference for subcutaneous administration due to its convenience over intravenous infusion. However, in subcutaneous injection, in contrast to intravenous administration, the formulation is in contact with an extracellular matrix environment that behaves more like a gel than a fluid. This can impact the expected performance of a formulation. Since typical bulk fluid dissolution studies do not accurately simulate the subcutaneous environment, improved in vitro models to help better predict the behavior of the formulation are critical. Herein, we detail the development of a new model system consisting of a more physiologically relevant gel phase to simulate the rate of drug release and diffusion from a subcutaneous injection site using agarose hydrogels as a tissue mimic. This is coupled with continuous real-time data collection to accurately monitor drug diffusion. We show how this in vitro model can be used as an in vivo performance differentiator for different formulations of both large and small molecules. Thus, this model system can be used to improve optimization and understanding of new parenteral drug formulations in a rapid and convenient manner.

Modeling the Time Course of the Tissue Responses to Intramuscular Long-acting Paliperidone Palmitate Nano-/Microcrystals and Polystyrene Microspheres in the Rat

Long-acting injectable (LAI) drug suspensions consist of drug nano-/microcrystals suspended in an aqueous vehicle and enable prolonged therapeutic drug exposure up to several months. The examination of injection site reactions (ISRs) to the intramuscular (IM) injection of LAI suspensions is relevant not only from a safety perspective but also for the understanding of the pharmacokinetics. The aim of this study was to perform a multilevel temporal characterization of the local and lymphatic histopathological/immunological alterations triggered by the IM injection of an LAI paliperidone palmitate suspension and an analog polystyrene suspension in rats and identify critical time points and parameters with regard to the host response. The ISRs showed a moderate to marked chronic granulomatous inflammation, which was mediated by multiple cyto-/chemokines, including interleukin-1β, monocyte Chemoattractant Protein-1, and vascular endothelial growth factor. Lymphatic uptake and lymph node retention of nano-/microparticles were observed, but the contribution to the drug absorption was negligible. A simple image analysis procedure and empirical model were proposed for the accurate evaluation of the depot geometry, cell infiltration, and vascularization. This study was designed as a reference for the evaluation and comparison of future LAIs and to support the mechanistic modeling of the formulation–physiology interplay regulating the drug absorption from LAIs.

In vitro-in vivo correlation for complex non-oral drug products: Where do we stand?

In vitro–in vivo correlation (IVIVC) is a predictive mathematical model describing the relationship between an in vitro property and a relevant in vivo response of drug products. Since the U.S. Food and Drug Administration (FDA) published a regulatory guidance on the development, evaluation, and applications of IVIVC for extended release (ER) oral dosage forms in 1997, IVIVC has been one of the most important issues in the field of pharmaceutics. However, even with the aid of the FDA IVIVC Guidance, only very limited Abbreviated New Drug Application (ANDA) submission for ER oral drug products included adequate IVIVC data to enable the completion of bioequivalence (BE) review within first review cycle. Establishing an IVIVC for non-oral dosage forms has remained extremely challenging due to their complex nature and the lack of in vitro release methods that are capable of mimicking in vivo drug release conditions. This review presents a general overview of recent advances in the development of IVIVC for complex non-oral dosage forms (such as parenteral polymeric microspheres/implants, and transdermal formulations), and briefly summarizes the knowledge gained over the past two decades. Lastly this review discusses possible directions for future development of IVIVC for complex non-oral dosage forms.

Design and characterisation of a polyethylene oxide matrix with the potential use as a teat insert for prevention/treatment of bovine mastitis

This manuscript reports (for the first time) on antibiotic-free polymeric inserts for the prevention and/or treatment of bovine mastitis. Polyethylene oxide (PEO)-based inserts were prepared using different concentrations of various hydrophilic polymers and water-soluble and water-insoluble drug-release-modifying excipients. A simple and scalable melt-extrusion method was employed to prepare the inserts. The prepared inserts were characterised for their dimension, rheological and mechanical properties. The in vitro release of a model bacteriostatic drug (salicylic acid) from the prepared inserts was studied to demonstrate the effectiveness and reproducibility of the melt-extrusion manufacturing method. Further, the in vitro stability of the inserts was evaluated using gel permeation chromatography (GPC) to monitor any change in molecular weight under real-time and accelerated storage conditions. The investigated inserts were stable at accelerated storage conditions over a period of 6 months. PEO inserts have the potential to serve a dual purpose, act as a physical barrier against pathogens invading the teat canal of cows and possibly control the release of a drug.

Preparation of a newly formulated long-acting ceftiofur hydrochloride suspension and evaluation of its pharmacokinetics in pigs

A new long-acting ceftiofur hydrochloride preparation was formulated and its physical properties, stability, and pharmacokinetics were investigated in this study. The prepared ceftiofur hydrochloride suspension demonstrated a milk white consistency, was easy to re-disperse and was stable in light, heat and humidity stability tests. Its other physical properties such as flowability, syringeability, settling volume ratio, particle size and distribution were perfectly consistent with the standard of Ministry of Agriculture of the People's Republic of China. After intramuscular administration of a single dose in swine (5 mg/kg B.W.), the drug concentration-time data in plasma were well fitted using the two-compartment open model. Compared with the ceftiofur hydrochloride preparation (EXCENEL) from Pfizer, the peak concentration (C(max)) in plasma was decreased by 2.34 times (P < 0.001), the half-life of elimination phase (T(1/2beta)) was 1.65 times longer (P < 0.001), and the therapeutic level of ceftiofur above the lowest effective plasma concentration of 0.2 microg/mL (T > 0.2) was prolonged from 87.20 h to 135.36 h (P < 0.001). The ceftiofur hydrochloride suspension prepared in this study provides therapeutically effective plasma concentrations for a longer duration, which make it more effective and more convenient to use in the treatment of respiratory diseases that require the maintenance of therapeutic plasma concentrations over a long duration.

Role of in vitro release models in formulation development and quality control of parenteral depots

This review article provides an assessment of advantages/limitations of the use of current in vitro release models to predict in vivo performance of parenteral sustained release products (injectable depots). As highlighted, key characteristics influencing the in vivo drug fate may vary with the route of administration and the type of sustained release formulation. To this end, an account is given on three representative injection sites (intramuscular, subcutaneous and intra-articular) as well as on in vitro release mechanism(s) of drugs from five commonly investigated depot principles (suspensions, microspheres, hydrogels, lipophilic solutions, and liposomes/other nano-size formulations). Current in vitro release models are, to a different extent, able to mimic the rate, transport and equilibrium processes that the drug substance may experience in the environment of the administration site. Their utility for the purpose of quality control including in vitro-in vivo correlations and formulation design is discussed.

Drug delivery systems in domestic animal species

Delivery of biologically active agents to animals is often perceived to be the poor relation of human drug delivery. Yet this field has a long and successful history of species-specific device and formulation development, ranging from simple approaches and devices used in production animals to more sophisticated formulations and approaches for a wide range of species. While several technologies using biodegradable polymers have been successfully marketed in a range of veterinary and human products, the transfer of delivery technologies has not been similarly applied across species. This may be due to a combination of specific technical requirements for use of devices in different species, inter-species pharmacokinetic, pharmacodynamic and physiological differences, and distinct market drivers for drug classes used in companion and food-producing animals. This chapter reviews selected commercialised and research-based parenteral and non-parenteral veterinary drug delivery technologies in selected domestic species. Emphasis is also placed on the impact of endogenous drug transporters on drug distribution characteristics in different species. In vitro models used to investigate carrier-dependent transport are reviewed. Species-specific expression of transporters in several tissues can account for inter-animal or inter-species pharmacokinetic variability, lack of predictability of drug efficacy, and potential drug-drug interactions.

Critical factors influencing the in vivo performance of long-acting lipophilic solutions--impact on in vitro release method design

Parenteral long-acting lipophilic solutions have been used for decades and might in the future be used in the design of depots with tailored delivery characteristics. The present review highlights major factors influencing the in vivo performance of lipophilic solutions. Furthermore, an account is given of the characteristics of employed in vitro release methods with a focus on the "state" of sink condition, the stirring conditions, and the oil-water interfacial area. Finally, the capability of in vitro release data to predict the in vivo performance of drug substances administrated in the form of lipophilic solutions is discussed. It is suggested that as long as the major rate-limiting in vivo release mechanism is governed by the drug partitioning between the oil vehicle and the tissue fluid, the use of in vitro release testing in quality control appears to be realistic. With increasing lipophilicity of the drug substances and longer duration of action, the in vivo drug release process may become more complex. As discussed, practical analytical problems together with the inability of release methods to mimic two or more concomitant in vivo events may constitute severe impediments for establishment of in vitro in vivo correlations.

A comparison between pre-operative carprofen and a long-acting sufentanil formulation for analgesia after ovariohysterectomy in dogs

OBJECTIVE

To assess the analgesic efficacy and adverse effects of a novel, long-acting sufentanil preparation in dogs undergoing ovariohysterectomy (OHE).

STUDY DESIGN

Blinded, positively controlled, randomized field trial with four parallel treatment groups.

ANIMALS

Eighty client owned dogs undergoing elective OHE randomly allocated into four treatment groups (each n = 20).

MATERIALS AND METHODS

Three groups received intramuscular (IM) sufentanil (at 10, 15 and 25 microg kg(-1), respectively) and the control group received subcutaneous (SC) carprofen 4 mg kg(-1) SC plus acepromazine 0.05 mg kg(-1) IM as pre-anaesthetic medication. OHE was performed under thiopental/halothane anaesthesia. Visual Analogue Scale (VAS) scores for pain and sedation were awarded and mechanical nociceptive thresholds were measured at the wound and hock before surgery and up to 24 hours after tracheal extubation. Serum cortisol was measured before surgery, during surgery and up to 24 hours after tracheal extubation. Animals with inadequate post-operative analgesia were given rescue medication.

RESULTS

In the carprofen group, VAS pain scores were significantly higher, wound tenderness was greater and requirement for rescue analgesia was more than in the sufentanil-treated groups. Sufentanil produced dose dependent analgesia and sedation. All treatment groups showed similar patterns of change for cortisol concentrations. Use of the sufentanil preparation was associated with a relatively high incidence of adverse events.

CONCLUSIONS

The long-acting preparation of sufentanil provided excellent post-operative analgesia that was significantly better than that provided by carprofen. However, use of this formulation, in the anaesthetic technique used in the study, resulted in a relatively high incidence of adverse effects.

CLINICAL RELEVANCE

Full mu (MOP) opioid agonists provide significantly better post-operative analgesia than nonsteroidal anti-inflammatory drugs after moderately painful surgery. However, the widely recognized adverse effects of opioids may preclude the use of these agents.

Clinical efficacy and plasma concentrations of two formulations of buparvaquone in cattle infected with East Coast fever (Theileria parva infection)

East Coast fever, caused by the protozoan parasite Theileria parva, kills about 600,000 cattle annually in Africa. The hydroxynaphthoquinone compound buparvaquone (BPQ) is curative. Sixteen calves were infected with T. parva. On manifestation of disease symptoms, eight were injected with the original (pioneer) BPQ product and eight with a test product containing BPQ. All 16 calves were cured by one injection of 2.5 mg BPQ/kg bodyweight. The concentration of BPQ in blood plasma was monitored by HPLC. The mean observed C(max) of BPQ was 0.229 and 0.253 microg/mL of plasma, the mean observed time to reach this concentration (T(max)) was 2.62 and 2.12 h and the AUC (area under curve) was 4.785 and 4.156 microg h/mL, respectively, for the pioneer and test product. Considerable variations occurred in the plasma concentration of BPQ within each group. They showed no relationship with either clinical or parasitological parameters following treatment.