Poly(lactic acid) for delivery of bioactive macromolecules

Biodegradable polyester-based nano drug delivery system in cancer chemotherapy: a review of recent progress (2021-2023)

Cancer presents a formidable threat to human health, with the majority of cases currently lacking a complete cure. Frequently, chemotherapy drugs are required to impede its progression. However, these drugs frequently suffer from drawbacks such as poor selectivity, limited water solubility, low bioavailability, and a propensity for causing organ toxicity. Consequently, a concerted effort has been made to seek improved drug delivery systems. Nano-drug delivery systems based on biodegradable polyesters have emerged as a subject of widespread interest in this pursuit. Extensive research has demonstrated their potential for offering high bioavailability, effective encapsulation, controlled release, and minimal toxicity. Notably, poly (ε-caprolactone) (PCL), poly (lactic-co-glycolic acid) (PLGA), and polylactic acid (PLA) have gained prominence as the most widely utilized options as carriers of the nano drug delivery system. This paper comprehensively reviews recent research on these materials as nano-carriers for delivering chemotherapeutic drugs, summarizing their latest advancements, acknowledging their limitations, and forecasting future research directions.

Preparation, thermal response mechanisms and biomedical applications of thermosensitive hydrogels for drug delivery

INTRODUCTION

Drug treatment is one of the main ways of coping with disease today. For the disadvantages of drug management, thermosensitive hydrogel is used as a countermeasure, which can realize the simple sustained release of drugs and the controlled release of drugs in complex physiological environments.

AREAS COVERED

This paper talks about thermosensitive hydrogels that can be used as drug carriers. The common preparation materials, material forms, thermal response mechanisms, characteristics of thermosensitive hydrogels for drug release and main disease treatment applications are reviewed.

EXPERT OPINION

When thermosensitive hydrogels are used as drug loading and delivery platforms, desired drug release patterns and release profiles can be tailored by selecting raw materials, thermal response mechanisms, and material forms. The properties of hydrogels prepared from synthetic polymers will be more stable than natural polymers. Integrating multiple thermosensitive mechanisms or different kinds of thermosensitive mechanisms on the same hydrogel is expected to realize the spatiotemporal differential delivery of multiple drugs under temperature stimulation. The industrial transformation of thermosensitive hydrogels as drug delivery platforms needs to meet some important conditions.

Promising Role of Polylactic Acid as an Ingenious Biomaterial in Scaffolds, Drug Delivery, Tissue Engineering, and Medical Implants: Research Developments, and Prospective Applications

In the present scenario, the research is now being focused on the naturally occurring polymers that can gradually replace the existing synthetic polymers for the development of bio composites having applications in medical surgeries and human implants. With promising mechanical properties and bio compatibility with human tissues, poly lactic acid (PLA) is now being viewed as a future bio material. In order to examine the applicability of PLA in human implants, the current article sheds light on the synthesis of PLA and its various copolymers used to alter its physical and mechanical properties. In the latter half, various processes used for the fabrication of biomaterials are discussed in detail. Finally, biomaterials that are currently in use in the field of biomedical (Scaffolding, drug delivery, tissue engineering, medical implants, derma, cosmetics, medical surgeries, and human implants) are represented with respective advantages in the sphere of biomaterials.

Degradation of Polylactide and Polycaprolactone as a Result of Biofilm Formation Assessed under Experimental Conditions Simulating the Oral Cavity Environment

Polylactide (PLA) and polycaprolactone (PCL) are biodegradable and bioabsorbable thermoplastic polymers considered as promising materials for oral applications. However, any abiotic surface used, especially in areas naturally colonized by microorganisms, provides a favorable interface for microbial growth and biofilm development. In this study, we investigated the biofilm formation of C. krusei and S. mutans on the surface of PLA and PCL immersed in the artificial saliva. Using microscopic (AFM, CLSM) observations and spectrometric measurements, we assessed the mass and topography of biofilm that developed on PLA and PCL surfaces. Incubated up to 56 days in specially prepared saliva and microorganisms medium, solid polymer samples were examined for surface properties (wettability, roughness, elastic modulus of the surface layer), structure (molecular weight, crystallinity), and mechanical properties (hardness, tensile strength). It has been shown that biofilm, especially S. mutans, promotes polymer degradation. Our findings indicate the need for additional antimicrobial strategies for the effective oral applications of PLA and PCL.

Design and Evaluation of Autophagy-Inducing Particles for the Treatment of Abnormal Lipid Accumulation

Autophagy is a fundamental housekeeping process by which cells degrade their components to maintain homeostasis. Defects in autophagy have been associated with aging, neurodegeneration and metabolic diseases. Non-alcoholic fatty liver diseases (NAFLDs) are characterized by hepatic fat accumulation with or without inflammation. No treatment for NAFLDs is currently available, but autophagy induction has been proposed as a promising therapeutic strategy. Here, we aimed to design autophagy-inducing particles, using the autophagy-inducing peptide (Tat-Beclin), and achieve liver targeting in vivo, taking NAFLD as a model disease. Polylactic acid (PLA) particles were prepared by nanoprecipitation without any surfactant, followed by surface peptide adsorption. The ability of Tat-Beclin nanoparticles (NP T-B) to modulate autophagy and to decrease intracellular lipid was evaluated in vitro by LC3 immunoblot and using a cellular model of steatosis, respectively. The intracellular localization of particles was evaluated by transmission electron microscopy (TEM). Finally, biodistribution of fluorescent NP T-B was evaluated in vivo using tomography in normal and obese mice. The results showed that NP T-B induce autophagy with a long-lasting and enhanced effect compared to the soluble peptide, and at a ten times lower dose. Intracellular lipid also decreased in a cellular model of NAFLD after treatment with T-B and NP T-B under the same dose conditions. Ultrastructural studies revealed that NP T-B are internalized and located in endosomal, endolysosomal and autolysosomal compartments, while in healthy and obese mice, NP T-B could accumulate for several days in the liver. Given the beneficial effects of autophagy-inducing particles in vitro, and their capacity to target the liver of normal and obese mice, NP T-B could be a promising therapeutic tool for NAFLDs, warranting further in vivo investigation.

Polylactide, Processed by a Foaming Method Using Compressed Freon R134a, for Tissue Engineering

Fabricating polymeric scaffolds using cost-effective manufacturing processes is still challenging. Gas foaming techniques using supercritical carbon dioxide (scCO₂) have attracted attention for producing synthetic polymer matrices; however, the high-pressure requirements are often a technological barrier for its widespread use. Compressed 1,1,1,2-tetrafluoroethane, known as Freon R134a, offers advantages over CO₂ in manufacturing processes in terms of lower pressure and temperature conditions and the use of low-cost equipment. Here, we report for the first time the use of Freon R134a for generating porous polymer matrices, specifically polylactide (PLA). PLA scaffolds processed with Freon R134a exhibited larger pore sizes, and total porosity, and appropriate mechanical properties compared with those achieved by scCO₂ processing. PLGA scaffolds processed with Freon R134a were highly porous and showed a relatively fragile structure. Human mesenchymal stem cells (MSCs) attached to PLA scaffolds processed with Freon R134a, and their metabolic activity increased during culturing. In addition, MSCs displayed spread morphology on the PLA scaffolds processed with Freon R134a, with a well-organized actin cytoskeleton and a dense matrix of fibronectin fibrils. Functionalization of Freon R134a-processed PLA scaffolds with protein nanoparticles, used as bioactive factors, enhanced the scaffolds' cytocompatibility. These findings indicate that gas foaming using compressed Freon R134a could represent a cost-effective and environmentally friendly fabrication technology to produce polymeric scaffolds for tissue engineering approaches.

Polyester Polymeric Nanoparticles as Platforms in the Development of Novel Nanomedicines for Cancer Treatment

Many therapeutic agents have failed in their clinical development, due to the toxic effects associated with non-transformed tissues. In this context, nanotechnology has been exploited to overcome such limitations, and also improve navigation across biological barriers. Amongst the many materials used in nanomedicine, with promising properties as therapeutic carriers, the following one stands out: biodegradable and biocompatible polymers. Polymeric nanoparticles are ideal candidates for drug delivery, given the versatility of raw materials and their feasibility in large-scale production. Furthermore, polymeric nanoparticles show great potential for easy surface modifications to optimize pharmacokinetics, including the half-life in circulation and targeted tissue delivery. Herein, we provide an overview of the current applications of polymeric nanoparticles as platforms in the development of novel nanomedicines for cancer treatment. In particular, we will focus on the raw materials that are widely used for polymeric nanoparticle generation, current methods for formulation, mechanism of action, and clinical investigations.

Injectable RANKL sustained release formulations to accelerate orthodontic tooth movement

BACKGROUND

Accelerating orthodontic tooth movement (OTM) through biologically effective methods, such as increasing osteoclast-mediated alveolar resorption, could effectively shorten treatment time.

OBJECTIVE

To evaluate an injectable formulation containing receptor activator of nuclear factor kappa-B ligand (RANKL) on the OTM.

MATERIALS AND METHODS

We fabricated a RANKL formulation from 100 µl of 100 µg/ml RANKL adsorbed on 10 mg of poly(lactic acid-co-glycolic acid) microspheres embedded in a 10 wt% aqueous hydroxyethyl cellulose carrier gel. We characterized these formulations for the rate of RANKL release, and then tested for bioactivity using in vitro cell culture. In vivo OTM studies were conducted using 15 week old male Wistar rats for 14 days. We injected the RANKL formulations palatal to the left maxillary first molar and accomplished OTM with a nickel-titanium (NiTi) coil spring applying 5-8 g force. Control groups involved the application of NiTi coil spring with and without placebo formulation. The outcome measure included the distance of tooth movement, bone volume fraction, tissue density, and root volume determined with micro-computed tomography. We determined the amount of osteoclast activity using tartrate-resistant acid phosphatase (TRAP) staining.

RESULTS

These formulations were able to sustain the release of RANKL for more than 30 days, and the released RANKL showed a positive effect on mice osteoclast precursor cells (RAW 264.7). Reported injectable RANKL formulations were effective in accelerating OTM compared with other control groups, with 129.2 per cent more tooth movement than no formulation and 71.8 per cent more than placebo formulation, corresponding with a significant increase in the amount of TRAP activity. We did not observe any significant differences in root resorption between the groups.

CONCLUSION

Our study shows a significant increase in OTM with injectable formulations containing RANKL.

Growing a backbone - functional biomaterials and structures for intervertebral disc (IVD) repair and regeneration: challenges, innovations, and future directions

Back pain and associated maladies can account for an immense amount of healthcare cost and loss of productivity in the workplace. In particular, spine related injuries in the US affect upwards of 5.7 million people each year. The degenerative disc disease treatment almost always arises due to a clinical presentation of pain and/or discomfort. Preferred conservative treatment modalities include the use of non-steroidal anti-inflammatory medications, physical therapy, massage, acupuncture, chiropractic work, and dietary supplements like glucosamine and chondroitin. Artificial disc replacement, also known as total disc replacement, is a treatment alternative to spinal fusion. The goal of artificial disc prostheses is to replicate the normal biomechanics of the spine segment, thereby preventing further damage to neighboring sections. Artificial functional disc replacement through permanent metal and polymer-based components continues to evolve, but is far from recapitulating native disc structure and function, and suffers from the risk of unsuccessful tissue integration and device failure. Tissue engineering and regenerative medicine strategies combine novel material structures, bioactive factors and stem cells alone or in combination to repair and regenerate the IVD. These efforts are at very early stages and a more in-depth understanding of IVD metabolism and cellular environment will also lead to a clearer understanding of the native environment which the tissue engineering scaffold should mimic. The current review focusses on the strategies for a successful regenerative scaffold for IVD regeneration and the need for defining new materials, environments, and factors that are so finely tuned in the healthy human intervertebral disc in hopes of treating such a prevalent degenerative process.

Biopolymer Substrates in Buccal Drug Delivery: Current Status and Future Trend

BACKGROUND

This paper provides a critical review of biopolymer-based substrates, especially the cellulose derivatives, for their application in buccal drug delivery. Drug delivery to the buccal mucous has the benefits of immobile muscle, abundant vascularization and rapid recovery, but not all the drugs can be administered through the buccal mucosa (e.g., macromolecular drugs), due to the low bioavailability caused by their large molecular size. This shortfall inspired the rapid development of drug-compounding technologies and the corresponding usage of biopolymer substrates.

METHODS

Cellulose derivatives have been extensively developed for drug manufacturing to facilitate its delivery. We engaged in structured research of cellulose-based drug compounding technologies. We summarized the characteristic cellulose derivatives which have been used as the biocompatible substrates in buccal delivery systems. The discussion of potential use of the rapidly-developed nanocellulose (NC) is also notable in this paper.

RESULTS

Seventy-eight papers were referenced in this perspective paper with the majority (sixty-five) published later than 2010. Forty-seven papers defined the buccal drug delivery systems and their substrates. Fifteen papers outlined the properties and applications of cellulose derivatives. Nanocellulose was introduced as a leading edge of nanomaterial with sixteen papers highlighted its adaptability in drug compounding for buccal delivery.

CONCLUSION

The findings of this perspective paper proposed the potential use of cellulose derivatives, the typical kind of biopolymers, in the buccal drug delivery system for promoting the bioavailability of macromolecular drugs. Nanocellulose (NC) in particular was proposed as an innovative bio-binder/carrier for the controlled-release of drugs in buccal system.

Ruthenium-initiated polymerization of lactide: a route to remarkable cellular uptake for photodynamic therapy of cancer

Ruthenium complexes have attracted a lot of attention as potential photosensitizers (PSs) for photodynamic therapy (PDT). However, some of these PSs are unsuitable for PDT applications due to their low cellular uptake, which is possibly the consequence of their relatively low degree of lipophilicity, which prevents them from penetrating into tumor cells. Here, we report the simple one-pot synthesis of ruthenium-containing nanoconjugates from a non-cell-penetrating, non-phototoxic ruthenium(ii) polypyridyl complex (RuOH), by a drug-initiated ring-opening polymerization of lactide through the formation of a zinc initiator. These conjugates were then formulated into nanoparticles by nanoprecipitation and characterized by means of nuclear magnetic resonance spectroscopy (NMR), matrix-assisted laser desorption/ionization – time of flight mass spectrometry (MALDI-TOF MS) and dynamic light scattering (DLS). Finally, their photo-therapeutic activity (λ_exc = 480 nm, 3.21 J cm⁻²) in cancerous human cervical carcinoma (HeLa) and non-cancerous retinal pigment epithelium (RPE-1) cells was tested alongside that of RuOH and their cellular uptake in HeLa cells was assessed by confocal microscopy and inductively coupled plasma – mass spectrometry (ICP-MS). All nanoparticles showed improved photophysical properties including luminescence and singlet oxygen generation, enhanced cellular uptake and, capitalizing on this, an improved photo-toxicity. Overall, this study demonstrates how it is possible to transform a non-phototoxic PDT PS into an active PS using an easy, versatile polymerization technique.

This study shows the transformation of a non-phototoxic PDT photosensitizer into an active photosensitizer using an easy, versatile and generalizable one-pot ruthenium-initiated polymerization technique.

Functional polymeric nerve guidance conduits and drug delivery strategies for peripheral nerve repair and regeneration

Peripheral nerve injuries can be extremely debilitating, resulting in sensory and motor loss-of-function. Endogenous repair is limited to non-severe injuries in which transection of nerves necessitates surgical intervention. Traditional treatment approaches include the use of biological grafts and alternative engineering approaches have made progress. The current article serves as a comprehensive, in-depth perspective on peripheral nerve regeneration, particularly nerve guidance conduits and drug delivery strategies. A detailed background of peripheral nerve injury and repair pathology, and an in-depth look into augmented nerve regeneration, nerve guidance conduits, and drug delivery strategies provide a state-of-the-art perspective on the field.

A journey through the emergence of nanomedicines with poly(alkylcyanoacrylate) based nanoparticles

Starting in the late 1970s, the pioneering work of Patrick Couvreur gave birth to the first biodegradable nanoparticles composed of a biodegradable synthetic polymer. These nanoparticles, made of poly(alkylcyanoacrylate) (PACA), were the first synthetic polymer-based nanoparticulate drug carriers undergoing a phase III clinical trial so far. Analyzing the journey from the birth of PACA nanoparticles to their clinical evaluation, this paper highlights their remarkable adaptability to bypass various drug delivery challenges found on the way. At present, PACA nanoparticles include a wide range of nanoparticles that can associate drugs of different chemical nature and can be administered in vivo by different routes. The most recent technologies giving the nanoparticles customised functions could also be implemented on this family of nanoparticles. Through different examples, this paper discusses the seminal role of the PACA nanoparticles' family in the development of nanomedicines.

Aligned microchannel polymer-nanotube composites for peripheral nerve regeneration: Small molecule drug delivery

Peripheral nerve injury accounts for roughly 2.8% of all trauma patients with an annual cost of 7 billion USD in the U.S. alone. Current treatment options rely on surgical intervention with the use of an autograft, despite associated shortcomings. Engineered nerve guidance conduits, stem cell therapies, and transient electrical stimulation have reported to increase speeds of functional recovery. As an alternative to the conduction effects of electrical stimulation, we have designed and optimized a nerve guidance conduit with aligned microchannels for the sustained release of a small molecule drug that promotes nerve impulse conduction. A biodegradable chitosan structure reinforced with drug-loaded halloysite nanotubes (HNT) was formed into a foam-like conduit with interconnected, longitudinally-aligned pores with an average pore size of 59.3 ± 14.2 μm. The aligned composite with HNTs produced anisotropic mechanical behavior with a Young's modulus of 0.33 ± 0.1 MPa, very similar to that of native peripheral nerve. This manuscript reports on the sustained delivery of 4-Aminopyridine (4AP, molecular weight 94.1146 g/mol), a potassium-channel blocker as a growth factor alternative to enhance the rate of nerve regeneration. The conduit formulation released a total of 30 ± 2% of the encapsulated 4AP in the first 7 days. Human Schwann cells showed elevated expression of key proteins such as nerve growth factor, myelin protein zero, and brain derived neurotrophic factor in a 4AP dose dependent manner. Preliminary in vivo studies in a critical-sized sciatic nerve defect in Wistar rats confirmed conduit suturability and strength to withstand ambulatory forces over 4 weeks of their implantation. Histological evaluations suggest conduit biocompatibility and Schwann cell infiltration and organization within the conduit and lumen. These nerve guidance conduits and 4AP sustained delivery may serve as an attractive strategy for nerve repair and regeneration.

Preparation and optimization of poly (lactic acid) nanoparticles loaded with fisetin to improve anti-cancer therapy

Fisetin is a natural flavonoid with promising antitumor activity, whereas its clinical application is limited by its hydrophobic property. In this study, we aimed to load fisetin into poly(lactic acid) (PLA) nanoparticles to increase fisetin's solubility and therapeutic efficacy. Based on spontaneous emulsification solvent diffusion (SESD) method, the formulation of PLA nanoparticles was optimized by two successive experimental designs. One-factor-at-a-time variation experiments were first applied to investigate the effects of four process variables on three responses, including drug encapsulation efficiency, average particles size and cumulative drug release ratio, followed by determining the possible ranges of these variables. Subsequently, the combinations of four variables at best levels were evaluated using a Taguchi orthogonal array design with regard to the same three responses. Eventually, the nanoparticle prepared by optimized procedure showed a narrow size distribution around 226.85 ± 4.78 nm with a high encapsulation efficiency of 90.35%. The incorporation of fisetin in nanoparticles was subsequently confirmed by FT-IR and DSC spectroscopy. Furthermore, cytotoxicity assay against HCT116 colon cancer cells in vitro and antitumor test in a xenograft 4T1 breast cancer model in vivo demonstrated that the antitumor effect of drug-loaded nanoparticles was superior to that of free drug solution.

Review: Bioengineering approach for the repair and regeneration of peripheral nerve

Complex craniofacial surgeries of damaged tissues have several limitations, which present complications and challenges when trying to replicate facial function and structure. Traditional treatment techniques have shown suitable nerve function regeneration with various drawbacks. As technology continues to advance, new methods have been explored in order to regenerate damaged nerves in an effort to more efficiently and effectively regain original function and structure. This article will summarize recent bioengineering strategies involving biodegradable composite scaffolds, bioactive factors, and external stimuli alone or in combination to support peripheral nerve regeneration. Particular emphasis is made on the contributions of growth factors and electrical stimulation on the regenerative process.

•

Craniofacial nerve repair surgeries have limitations and often result in insufficient restoration of facial function.

•

Nerve repair strategies for critical defects have often resulted in failure to re-establish sufficient nerve function.

•

Biochemical molecules promote tissue regeneration by differentiation of recruited cells to mature neuronal fates.

•

Electrical stimulation promotes regeneration of axons and provide signals for native cells to differentiate.

Sonochemistry-Assembled Stimuli-Responsive Polymer Microcapsules for Drug Delivery

Stimuli-responsive polymer microcapsules (PMs) fabricated by the sonochemical method have emerged for developing useful drug delivery systems, and the latest developments are mainly focusing on the synthetic strategies and properties such as structure, size, stability, loading capacity, drug delivery, and release. There, the primary attribution of sonochemistry is to offer a simple and practical approach for the preparation of PMs. Structure, size, stability, and properties of PMs are designed mainly according to synthetic materials, implementation schemes, or specific demands. Numerous functionalities of PMs based on different stimuli are demonstrated: targeting motion in a magnetic field or adhering to the living cells with sensitive sites through molecular recognition, and stimuli-triggered release including enzymatic catalysis, chemical reaction as well as physical or mechanical process. The current review discusses the basic principles and mechanisms of stimuli effects, and describes the progress in the application such as targeted drug systems and controlled drug systems, and also gives an outlook on the future challenges and opportunities for drug delivery and theranostics.

Spiral Layer-by-Layer Micro-Nanostructured Scaffolds for Bone Tissue Engineering

This Article reports the fabrication and characterization of composite micro-nanostructured spiral scaffolds functionalized with nanofibers and hydroxyapatite (HA) for bone regeneration. The spiral poly(lactic acid-co-glycolic acid) (PLGA) porous microstructure was coated with sparsely spaced PLGA nanofibers and HA to enhance surface area and bioactivity. Polyelectrolyte-based HA coating in a layer-by-layer (LBL) fashion allowed 10-70 μM Ca²⁺/mm² incorporation. These scaffolds provided a controlled release of Ca²⁺ ions up to 60 days with varied release kinetics accounting up to 10-50 μg. Spiral scaffolds supported superior adhesion, proliferation, and osteogenic differentiation of rat bone marrow stromal cells (MSCs) as compared to controls microstructures. Spiral micro-nanostructures supported homogeneous tissue ingrowth and resulted in bone-island formation in the center of the scaffold as early as 3 weeks in a rabbit ulnar bone defect model. In contrast, control cylindrical scaffolds showed tissue ingrowth only at the surface because of limitations in scaffold transport features.

Biodegradable Polymeric Injectable Implants for Long-Term Delivery of Contraceptive Drugs

Development of injectable, long-lasting, contraceptive drug delivery formulations and implants are highly desired to avoid unplanned pregnancies while improving patient compliance and reducing adverse side effects and treatment costs. The present study reports on the fabrication and characterization of two levonorgestrel (LNG) microsphere injectable formulations. Poly(ε-caprolactone) (PCL) with 12.5% and 24% (w/w) LNG were fabricated into microspheres, measuring 300±125 μm, via the oil-in-water (o/w) emulsion solvent evaporation technique. Formulations showed sustained drug release up to 120 days. FTIR, XRD, DSC, and TGA confirmed the absence of LNG chemical interaction with PCL as well as its molecular level distribution. The in vitro release of LNG was calculated to be Fickian diffusion controlled and properly characterized. The inclusion of multiple elevated release temperatures allowed for the application of the Arrhenius model to calculate drug release constants and representative sampling intervals, demonstrating the use of elevated temperatures for accelerated-time drug release studies.

Bioactive polymeric formulations for wound healing

Ricinoleic acid (RA) has potential to promote wound healing because of its analgesic and anti-inflammatory properties. This study investigates the synthesis and characterization of RA liposomes infused in a hydrogel for topical application. Lecithin liposomes containing RA were prepared and incorporated into a chitosan solution and were subsequently cross-linked with dialdehyde β-cyclodextrin (Di-β-CD). Chitosan/Di-β-CD concentrations and reaction temperatures were varied to alter gelation time, water content, and mechanical properties of the hydrogel in an effort to obtain a wide range of RA release profiles. Hydrogel cross-linking was confirmed by spectroscopy, and liposome and carrier hydrogel morphology via microscopy. Chitosan, Di-β-CD, and liposome concentrations within the formulation affected the extent of matrix swelling, mechanical strength, and pore and overall morphology. Higher cross-linking density of the hydrogel led to lower water uptake and slower release rate of RA. Optimized formulations resulted in a burst release of RA followed by a steady release pattern accounting for 80% of the encapsulated RA over a period of 48 hours. However, RA concentrations above 0.1 mg/mL were found to be cytotoxic to fibroblast cultures in vitro because of the oily nature of RA. These formulations promoted wound healing when used to treat full thickness skin wounds (2 cm²) in Wister male rats. The wound contraction rates were significantly higher compared to a commercially available topical cream after a time period of 21 days. Histopathological analysis of the RA-liposomal chitosan hydrogel group showed that the epidermis, dermis, and subcutaneous skin layers displayed an accelerated yet normal healing compared to control group.

Polymeric 3D Printed Structures for Soft-Tissue Engineering

3D printing, or rapid prototyping, is a fabrication technique that is used for various engineering applications with advantages such as mass production and fine tuning of spatial-dimensional properties. Recently, this fabrication method has been adopted for tissue engineering applications due to its ability to finely tune porosity and create precise, uniform, and repeatable structures. This review aims to introduce 3D printing applications in soft tissue engineering and regenerative medicine including state-of-the-art scaffolds and key future challenges. Furthermore, 3D printing of individual cells, an evolution of traditional 3D printing technology which represents a cutting-edge technique for the creation of cell seeded scaffolds in vitro, is discussed. Key advances demonstrate the advantages of 3D printing, while also highlighting potential shortcomings to improve upon. It is clear that as 3D printing technology continues to develop, it will serve as a truly revolutionary means for fabrication of structures and materials for regenerative applications.

Nanomedicines for dysfunctional macrophage-associated diseases

Macrophages play vital functions in host inflammatory reaction, tissue repair, homeostasis and immunity. Dysfunctional macrophages have significant pathophysiological impacts on diseases such as cancer, inflammatory diseases (rheumatoid arthritis and inflammatory bowel disease), metabolic diseases (atherosclerosis, diabetes and obesity) and major infections like human immunodeficiency virus infection. In view of this common etiology in these diseases, targeting the recruitment, activation and regulation of dysfunctional macrophages represents a promising therapeutic strategy. With the advancement of nanotechnology, development of nanomedicines to efficiently target dysfunctional macrophages can strengthen the effectiveness of therapeutics and improve clinical outcomes. This review discusses the specific roles of dysfunctional macrophages in various diseases and summarizes the latest advances in nanomedicine-based therapeutics and theranostics for treating diseases associated with dysfunctional macrophages.