Oropharyngeal airway in children with Class III malocclusion evaluated by cone-beam computed tomography

Correlation between cone-beam computed tomographic findings and the apnea-hypopnea index in obstructive sleep apnea patients: A cross-sectional study

Purpose

The aim of this study was to explore the correlations of cone-beam computed tomographic findings with the apnea-hypopnea index in patients with obstructive sleep apnea.

Materials and Methods

Forty patients with obstructive sleep apnea were selected from the ear-nose-throat (ENT) outpatient clinic, Faculty of Medicine, Mansoura University. Cone-beam computed tomography was performed for each patient at the end of both inspiration and expiration. Polysomnography was carried out, and the apnea-hypopnea index was obtained. Linear measurements, including cross-sectional area and the SNA and SNB angles, were obtained. Four oral and maxillofacial radiologists categorized pharyngeal and retropalatal airway morphology and calculated the airway length and volume. Continuous data were tested for normality using the Kolmogorov-Smirnov test and reported as the mean and standard deviation or as the median and range. Categorical data were presented as numbers and percentages, and the significance level was set at P<0.05.

Results

The minimal value of the cross-sectional area, SNB angle, and airway morphology at the end of inspiration demonstrated a statistically significant association (P<0.05) with the apnea-hypopnea index, with excellent agreement. No statistically significant difference was found in the airway volume, other linear measurements, or retropalatal airway morphology.

Conclusion

Cone-beam computed tomographic measurements in obstructive sleep apnea patients may be used as a supplement to a novel radiographic classification corresponding to the established clinical apnea-hypopnea index classification.

Effects of adenoid hypertrophy on nasopharyngeal airway ventilation: A computational fluid dynamics study

OBJECTIVES

Adenoid hypertrophy causes impaired nasopharyngeal airways (NA) ventilation. However, it is difficult to evaluate the ventilatory conditions of NA. Therefore, this study aimed to analyze the nasopharyngeal airway resistance (NARES) based on computational fluid dynamics simulations and the nasopharyngeal airway depth (NAD) and adenoid hypertrophy grade measured on cephalometric cone-beam computed tomography images and determine the relationship between NAD and grade and NARES to ultimately assess using cephalometric measurements whether NA has airway obstruction defects.

METHODS

Cephalogram images were generated from cone-beam computed tomography data of 102 children (41 boys; mean age: 9.14 ± 1.43 years) who received orthodontic examinations at an orthodontic clinic from September 2012 to March 2023, and NAD and adenoid grade and NARES values were measured based on computational fluid dynamics analyses using a 3D NA model. Nonlinear regression analyses were used to evaluate the relationship between NARES and NAD and correlation coefficients to evaluate the relationship between grade and NARES.

RESULTS

NARES was inversely proportional to the cube of NAD (R2 = 0.786, P < 0.001), indicating a significant relationship between these variables. The resistance NARES increased substantially when the distance NAD was less than 5 mm. However, adenoid Grade 4 (75 % hypertrophy) was widely distributed.

CONCLUSIONS

These study findings demonstrate that the ventilatory conditions of NA can be determined based on a simple evaluation of cephalogram images. An NAD of less than 5 mm on cephalometric images results in NA obstruction with substantially increased airflow resistance.

Face Mask Therapy and Comprehensive Orthodontic Treatment for Skeletal Class III Malocclusion: A Case Report

Aim

This article aims to report a case of face mask therapy and comprehensive orthodontic treatment for skeletal class III malocclusion in a 16-year-old girl.

Background

Treating skeletal class III malocclusion in a growing patient is crucial, as it can help avoid the need for additional surgery. Early treatment also lessens the negative impacts of the patient's facial abnormality on their social life because surgery is only done later.

Case description

In this case report, a 14-year-old female patient presented with skeletal class III malocclusion with primary complaints of anterior crossbite. There was no relevant medical history. Face mask therapy and fixed appliance therapy were components of the treatment approach that successfully corrected the malocclusion. The total period of treatment was 20 months.

Conclusion

The treatment resulted in a harmonious face, a well-aligned smile arch, stable dental and skeletal relationships, and significant esthetic improvements, including improved facial symmetry and profile.

Significance

A growing teen who has a skeletal class III malocclusion and a maxillary deficit may be helped by a combination of face mask therapy and thorough orthodontic treatment. This case report outlines the use of the aforementioned technique to successfully treat a 14-year-old child with class III malocclusion and maxillary deficiencies.Early management of skeletal class III malocclusion in developing adolescents is vital as it can potentially eliminate the necessity for future surgical intervention, leading to improved treatment outcomes.Careful case selection, patient cooperation, and long-term stability enable a successful, stable, and esthetically pleasing treatment outcome.

How to cite this article

Le LN, Do TT, P Le KV. Face Mask Therapy and Comprehensive Orthodontic Treatment for Skeletal Class III Malocclusion: A Case Report. Int J Clin Pediatr Dent 2024;17(3):368-376.

Associations between skeletal discrepancies, breathing pattern, and upper airway obstruction in Class III malocclusions

OBJECTIVE

To verify the associations between sagittal and vertical skeletal discrepancies, changes in upper airways, and breathing pattern in children and adolescents with Angle Class III and Class III subdivision malocclusions.

METHODS

Eighty-five children and adolescents with a mean age of 9.5 ± 1.74 years were selected. Cephalometry assessed the sagittal relationship (AO-BO measurement), facial types (Ricketts VERT index), nasopharynx, and oropharynx. An otorhinolaryngologist analyzed the breathing pattern and upper airway obstruction during anamnesis, physical examination, anterior rhinoscopy, and nasofibroscopy. Medical records were also reviewed. For statistical analysis, ordinary one-way ANOVA, Kruskal-Wallis (Tukey's post-hoc), unpaired t-test, Pearson's correlation, chi-square, and Fisher's exact tests (p < 0.05) were used.

RESULTS

The nasopharyngeal cephalometric dimension and pharyngeal tonsil hypertrophy were associated, whereas the oropharyngeal cephalometric dimension and palatine tonsils hypertrophy were not. Sagittal discrepancies were associated with septum deviation, while facial type was associated with inferior turbinate and palatine tonsils hypertrophy. However, facial type was not associated with breathing pattern, septum deviation, and pharyngeal tonsils hypertrophy.

CONCLUSIONS

Sagittal discrepancies and type of malocclusion were not associated with breathing pattern and changes in upper airways, except for the severity of septum deviation and Class III malocclusions, which were associated with large sagittal discrepancies. Although the facial types analyzed presented signs of airway obstruction, the highest prevalence of inferior turbinate and palatine tonsils hypertrophy were found in patients with dolichofacial type.

Study of pharyngeal airway morphology with CBCT: Benefits of four premolar extraction orthodontic treatments

BACKGROUND AND AIM

Four premolars extractions are routine procedures for correction of malocclusion, but will inevitably lead to a reduction of tongue space, whether this will weaken the pharyngeal airway remains a controversy.

PATIENTS AND METHODS

Cone-beam computed tomography (CBCT) radiographs of 80 patients who completed four premolar extraction orthodontic treatments were collected and divided into three anteroposterior skeletal groups according to the ANB (angle subspinale to nasion to supramentale) value. Linear, angular, cross-sectional area, and volumetric dimensions of the pharyngeal airway were measured using Dolphin Imaging 11.9 software. One-way analysis of variance and Pearson's correlation coefficient test were performed to assess the intergroup comparisons. Treatment changes were evaluated with two-sample t-tests.

RESULTS

In intergroup comparisons, vertical linear and cross-sectional area differences were identified in S-Go/N-Me, VD1, VD1/N-Me, VD2/N-Me, AA, OAA and OMINI (p<0.05), while other measurements showed no significant differences. Angle2, the tilting degree of the pharyngeal airway, showed a positive correlation with ANB (p<0.05). As for the treatment changes, a significant increase was found in the pharyngeal airway in the Class I group (OUA p<0.05, VD1 p<0.001, VD2 p<0.05) and Class II group (VD1 p<0.001. VD2, p<0.05), and inversely, a significant decrease was found in the pharyngeal airway in the Class III group (OAA p<0.05, OMINI p<0.05, OUA p<0.05). No volumetric difference was identified. Interestingly, regarding the preoperative pharyngeal airway size, values trended to the mean value significantly.

CONCLUSION

Four premolar extraction orthodontic treatments did not affect the pharyngeal airway volume except for the vertical liner and cross-sectional area dimensions. The trend of the gold standard suggested a positive influence of four premolar extraction orthodontic treatments.

Craniofacial treatment protocol for a pediatric patient with obstructive sleep apnea and skeletal Class III malocclusion: A 13-year follow-up

This report aimed to describe the long-term effects of craniofacial growth modification treatment on sleep and breathing functions in a 7-year-old girl diagnosed with skeletal Class III malocclusion and sleep-disordered breathing. Based on the flowchart of orthodontic intervention protocol that we proposed for phenotype-based patient selection and skeletal target-based treatment selection for pediatric patients with sleep-disordered breathing, a 2-phase treatment targeting the nasomaxillary complex was performed. Posttreatment 3-dimensional changes in the skeletal structure and upper airway were evaluated in association with functional assessment using a validated pediatric sleep questionnaire and home sleep test. Esthetic improvement and obstructive sleep apnea cure were achieved without skeletal surgery. The 2-year retention records showed stable occlusion and improved facial profile with normal breathing and sleep.

Three-dimensional oropharyngeal airway changes after facemask therapy using low-dose computed tomography: a clinical trial with a retrospectively collected control group

Aims

This study aimed to evaluate the short-term oropharyngeal airway volumetric changes in growing Class III maxillary-deficient patients treated by facemask without expansion compared with untreated Class III controls, using low-dose computed tomography.

Methods

Eighteen maxillary-deficient children (9 boys, nine girls) with a mean age of 7.81 ± 0.84 years were treated with maxillary bonded bite block and facemask (FM). Pre- (T1) and post-treatment (T2) low-dose CT images were acquired. Sixteen untreated Class III patients with a mean age of 7.03 ± 0.56 years had previously two low-dose CT scans within a one year of follow-up. Volumetric and minimal cross-sectional area measurements were obtained to assess the oropharyngeal airway changes. Quantitative mean, minimum, and maximum displacement of superimposed 3D models were estimated from a point-based analysis. Paired-samples t-tests were used for the intragroup comparisons, and an independent samples t-test and the Mann–Whitney U tests were carried out for the intergroup comparisons.

Results

A statistically significant increase in the total and retropalatal volumes oropharyngeal airway volume were observed in the control group (302.23 ± 345.58 and 145.73 ± 189.22 mm³, respectively). In the FM group, statistically significant increases in the total and retropalatal volumes were observed (738.86 ± 1109.37 mm³ and 388.63 ± 491.44 mm³, respectively). However, no statistically significant differences were found between the two groups, except for the maximum part analysis which was significantly greater in the FM group (p = 0.007).

Conclusions

FM therapy appeared to have no additional effects on the oropharyngeal airway other than those induced by growth.

The role of the dentist in the diagnosis and management of pediatric obstructive sleep apnea

The objective of this article is to review the role of the dentist in the early diagnosis of pediatric obstructive sleep apnea (OSA) and to provide an in-depth review of the best evidence-based practices available to treat and/or to refer these patients for intervention.

Material and methods

A narrative review was performed using indexed data bases (PubMed, Medline, EMBASE, OVID, Scopus and Cochrane) up to year 2020, and approximately 1000 articles were reviewed. The articles included were those with the best information provided.

Results

Detailed review of the literature suggests that the role of the dentist has been redefined owing to their expertise in the orofacial region. Every patient consulting a dental practice is not merely a dental patient; he/she also requires a comprehensive medical review. The role of the dentist is pivotal in pediatric patients once diagnosed with OSA; as the patients grow, growth modification can be achieved, and future management will be easier. Initiating dental treatments during growth can benefit patients two-fold, saving them from malocclusion, and intervening in orofacial structural growth can help to avoid cumbersome treatments, such as CPAP and various surgeries. Proper diagnosis and management of systemic illnesses can prevent compromised quality of life, delays in treatment, morbidity and, in some cases, mortality.

Usefulness of Hard Palate Measurements in Predicting Airway Dimensions in Patients Referred for Cone Beam CT

Purpose:

The aim of the study was to evaluate the usefulness of hard palate measurements in predicting airway dimensions in patients referred for cone-beam CT (CBCT).

Materials and Methods:

Six hundred forty-three patients (239 males and 404 females) were examined by CBCT. Using dedicated CBCT software (Kodak CS 3D imaging version 3.8.6, Carestream, Rochester, NY, USA); different hard palate (palatal interalveolar length, palatal arch depth, maxillo-palatal arch angle, and alveolar width) and airway measurements (airway volume, minimum cross-sectional area, minimum anteroposterior distance, minimum right to left distance and airway length) were obtained and correlated using Pearson’s correlation coefficients and regression analysis.

Results:

Although the correlation between hard palate and airway measurements was weak (Pearson coefficient (r) < 0.40), there were significant (P < 0.05) additive effects for hard palate measurements in predicting airway dimensions. Maxillo-palatal arch angle was the only hard palate measurement that had no effect in predicting airway dimensions.

Conclusion:

Hard palate measurements are considered useful in predicting airway dimensions in patients referred for CBCT.

Multislice computed tomography assessment of airway patency changes in the supine position following mandibular setback surgery for mandibular prognathism: A prospective 1-year follow-up study

Objectives:

The purpose of this study was to perform a three-dimensional analysis on the pharyngeal airway of supine patients who have undergone mandibular setback surgery, using multislice computed tomography (MSCT). We also measured the respiratory disturbance index pre- and post-surgery, using a portable sleep monitor.

Materials and Methods:

The subjects included two males and nine females who were diagnosed with mandibular prognathism at Hiroshima University Hospital and were scheduled to undergo the bilateral sagittal split osteotomy. Using a CT scanner, baseline MSCT images were obtained from the subjects before surgery for morphological analysis, and then the two further scans were obtained after mandibular setback surgery. All patients were provided with at-hoeme sleep monitor to use it both at baseline and approximately 1 year after surgery.

Results:

Middle and epiglottis pharyngeal space and cross-sectional area were significantly decreased immediately after setback surgery, but did not change further over the 1-year period. Mandibular setback was not associated with the development of sleep breathing disorder (SBD) during the 1-year follow-up period.

Conclusion:

We found no evidence that the reduction in the pharyngeal airway space immediately after mandibular setback surgery recovered significantly during the follow-up period, although mandibular setback was not associated with development of SBD.

The upper airway volume effects produced by Hyrax, Hybrid-Hyrax, and Keles keyless expanders: a single-centre randomized controlled trial

OBJECTIVE

To assess upper airway volume changes after rapid maxillary expansion (RME) with three different expanders.

TRIAL DESIGN

Three-arm parallel randomized clinical trial.

METHODS

Sixty-six patients, 10-16 years old, in permanent dentition, with maxillary transverse deficiency were recruited and assigned with block randomization (1:1:1 ratio) and allocation concealment to three groups of 22 patients each (Hyrax, Hybrid-Hyrax, and Keles keyless expander). The primary outcome (overall upper airway volume change) and secondary outcomes (volume changes in the nasal cavity, nasopharynx, oropharynx, and hypopharynx) were blindly assessed on the initial (T0) and final (T1, 6 months at appliance removal) cone beam computed tomography. Differences across groups were assessed with crude or adjusted for confounders (gender, age, growth stage, skeletal pattern, baseline airway volume, and amount of expansion) linear regression models.

RESULTS

Fifty-one patients were analysed (19, 19, and 13 in the Hyrax, Hybrid-Hyrax, and Keles groups). Maxillary expansion resulted in considerable increases in total airway volume in the Hybrid-Hyrax group (+5902.1 mm3) and less in the Hyrax group (+2537.9 mm3) or the Keles group (+3001.4 mm3). However, treatment-induced changes for the primary and all secondary outcomes were of small magnitude and no significant difference was seen among the three expanderes in the total airway volume in either crude or adjusted analyses (P > 0.05 in all instances). Finally, among pre-peak patients (CVM 1-3), the Hybrid-Hyrax expander was associated with significantly greater increases in total airway volume compared to the Hyrax expander (P = 0.02).

CONCLUSIONS

RME resulted in relatively small increases in total upper airway volume and its separate compartments, with mostly no statistically significant differences across the Hyrax, Hybrid-Hyrax, and Keles groups.

LIMITATIONS

Significantly greater attrition was found in the Keles group due to appliance failure. The current trial might possibly be under-powered to detect differences between groups, if such exist.

HARMS

Keles expanders blocked during activations and required substitution for completion of treatment.

PROTOCOL

The protocol was not published before trial commencement.

REGISTRATION

Australian and New Zealand Clinical Trial Registry (ACTRN12617001136392).

A consideration of factors affecting palliative oral appliance effectiveness for obstructive sleep apnea: a scoping review

STUDY OBJECTIVES

This scoping review allows physicians, researchers, and others interested in obstructive sleep apnea to consider effectiveness of oral appliances (OAs). The intent is to improve understanding of OA effectiveness by considering morphologic interaction in patients with obstructive sleep apnea.

METHODS

Morphologic and biomechanical criteria for positional alterations of the mandible assessed success rates of OA appliances. Searches of databases (Medline, PubMed, The Cochrane Library, EBSCO) using terms: OA treatment effectiveness and positive and/or negative outcome predictors. Craniofacial predictors of OAs and obstructive sleep apnea biomechanical factors of anatomical traits associated with OA effectiveness were included. Databases searched radiographic cephalometric imaging for morphology/phenotypes and apnea-hypopnea index responses. Articles were excluded if title or abstract was not relevant or a case report. If the analysis did not report mean or standard deviation for apnea-hypoxia index, it was excluded. No language, age, or sex restrictions were applied.

RESULTS

Analysis of 135 articles included in searched literature indicated alterations in musculature and pharyngeal airway structure through OA use. These alterations were individually unpredictable with wide variability 61.81% ± 12.29 (apnea-hypoxia index mean ± standard deviation). Morphologic variations as predictors were typically weak and idiosyncratic. Biomechanical factors and wide variations in the metrics of appliance application were unclear, identifying gaps in knowledge and practice of OAs.

CONCLUSIONS

An integrated basis to identify morphologic and biomechanical elements of phenotypic expressions of sleep-disordered breathing in the design and application of OAs is needed. Current knowledge is heterogeneous and shows high variability. Identification of subgroups of patients with obstructive sleep apnea responding to OAs is needed.

Evaluation of volume change in oral cavity proper before and after mandibular advancement

OBJECTIVES

To evaluate the tongue and oral cavity proper volume in pre- and post-bilateral sagittal split osteotomy (BSSO) patients, and to establish whether there was a correlation between them.

MATERIALS AND METHODS

A retrospective study that evaluated 12 patients' pre- and post-surgical computed tomography records satisfying the inclusion criteria. Borders were defined for measurement of tongue and oral cavity proper volume. The volume assessment was carried out using 3D slice software.

RESULTS

The mean difference of tongue volume was 5.7 ± 1.7 cm3, which showed high statistical significance. The mean difference of oral cavity proper volume (OCVP) was 6.9 ± 3.4 cm3 and indicated high statistical significance. A very strong positive correlation existed between pre- and post-surgical tongue volume. Positive correlation was also evident between pre and post - surgical OCVP. Medium positive correlation was noted when the difference between pre- and post-surgical tongue and OCVP were assessed.

CONCLUSIONS

There was a significant change in volume of tongue and oral cavity proper after BSSO advancement surgery. The space around the tongue, position of tongue, and maxillary and mandibular relationship influence the volume of tongue and oral cavity proper.

Evaluation of pharyngeal airway dimensions and hyoid bone position according to craniofacial growth pattern

OBJECTIVE

To compare pharyngeal airway dimensions and hyoid bone position in different craniofacial growth patterns.

METHODS

In total, 611 patients divided into 9 subgroups were compared according to malocclusion classification and vertical growth pattern, and these subgroups were compared in terms of pharyngeal airway and hyoid measurements. A two-way ANOVA test was used to compare the findings of the subgroups.

RESULTS

No significant difference was found for the pharyngeal measurements between the groups (p>0.05). The vertical airway length (PNS-Ep) was significantly shorter in the Class III malocclusion group (p<0.05) and in the hypodivergent group (p<0.05). No statistically significant difference was found between any subgroups in any measurements of the position of the hyoid bone (p>0.05).

CONCLUSION

The pharyngeal airway dimensions and hyoid bone position are similar among individuals in the sagittal direction. The vertical airway length is significantly shorter in Class III and hypodivergent individuals.

Position of the hyoid bone and its correlation with airway dimensions in different classes of skeletal malocclusion using cone-beam computed tomography

Purpose

This study investigated the position of the hyoid bone and its relationship with airway dimensions in different skeletal malocclusion classes using cone-beam computed tomography (CBCT).

Materials and Methods

CBCT scans of 180 participants were categorized based on the A point-nasion-B point angle into class I, class II, and class III malocclusions. Eight linear and 2 angular hyoid parameters (H-C3, H-EB, H-PNS, H-Me, H-X, H-Y, H-[C3-Me], C3-Me, H-S-Ba, and H-N-S) were measured. A 3-dimensional airway model was designed to measure the minimum cross-sectional area, volume, and total and upper airway length. The mean cross-sectional area, morphology, and location of the airway were also evaluated. Data were analyzed using analysis of variance and the Pearson correlation test, with P values <0.05 indicating statistical significance.

Results

The mean airway volume differed significantly among the malocclusion classes (P<0.05). The smallest and largest volumes were noted in class II (2107.8±844.7 mm³) and class III (2826.6±2505.3 mm³), respectively. The means of most hyoid parameters (C3-Me, C3-H, H-Eb, H-Me, H-S-Ba, H-N-S, and H-PNS) differed significantly among the malocclusion classes. In all classes, H-Eb was correlated with the minimum cross-sectional area and airway morphology, and H-PNS was correlated with total airway length. A significant correlation was also noted between H-Y and total airway length in class II and III malocclusions and between H-Y and upper airway length in class I malocclusions.

Conclusion

The position of the hyoid bone was associated with airway dimensions and should be considered during orthognathic surgery due to the risk of airway obstruction.

Treatment effects of two different appliances on pharyngeal airway space in mixed dentition Malay children

BACKGROUND

Treatment of Class III malocclusion is related to redirecting the growth of mandible, which may have an impact on the pharyngeal airway.

OBJECTIVE

To evaluate and compare the treatment effect of Reverse Twin-Block (RTB) and Reverse Pull Face Mask (RPFM) on Pharyngeal Airway Space (PAS) in early and late mixed dentition Class III samples.

METHODS

Ninety-five mixed dentition Malay children with Class III malocclusion were included in this study. Data consists of 190 pre- and post-treatment lateral cephalograms of early (8-9 years) and late (10-11 years) mixed dentition Class III samples. forty-nine samples were under RTB and forty-six samples were under RPFM. Treatment changes were evaluated by McNamara airway analysis and changes in tongue and hyoid bone position.

RESULTS

Both upper and lower pharyngeal airway width were increased after treatment with RTB and RPFM ruling out the chance of airway constriction. There was also posterior positioning of the tongue and hyoid bone indicating mandibular retrusion. No significant treatment changes were found on the Pharyngeal Airway Space by the factor age, gender or type of appliance.

CONCLUSIONS

Both RTB and RPFM increased the Pharyngeal Airway Space and produced similar treatment effect. As age does not affect the treatment outcome significantly, treatment can be delayed until late mixed dentition stage.

Multislice Computed Tomography Assessment of Airway Patency Changes Associated with Mandibular Advancement Appliance Therapy in Supine Patients with Obstructive Sleep Apnea

The purpose of the present study was to measure the regional effects of the mandibular advancement appliance (MAA) on the upper airway of supine subjects with obstructive sleep apnea (OSA) using multislice computed tomography (MSCT). The subjects included 8 males and 5 females who were diagnosed with mild to moderate OSA and were referred to the Orthodontic Clinic of Hiroshima University Hospital, where they underwent MAA therapy. Using a CT scanner, baseline MSCT images were obtained from the subjects without the MAA for morphological analysis, and then the experimental images were obtained while wearing the MAA. To measure the anteroposterior diameter, width, and cross-sectional area of the oropharynx region of interest (ROI), five distance variables were first defined on each multiplanar reconstruction (MPR) image using OsiriX. Additionally, the volumes of the upper airway, bony hard tissue, and soft tissue (soft palate and tongue) in the oro-hypopharyngeal region were measured. In most of the assessed airway size variables, significant increases in the anteroposterior diameter and width were observed after MAA therapy. Regarding the upper airway cross-sectional area, all the upper airway size variables exhibited significant increases. In the volumetric analysis, a significant increase was observed in airway volume, whereas the soft tissue volume in the oro-hypopharyngeal region did not show the significant decrease after MMA therapy. However, from a different point of view, the volumes of the upper airway and soft tissue significantly increased and decreased, respectively, as demonstrated by the calculated ratio for the oro-hypopharyngeal region. We demonstrated that the proportional size of the soft tissue volume, i.e., the soft palate and tongue in the oro-hypopharyngeal region, significantly decreased during use of an MAA. This forward displacement of the soft tissue thereby increases the retroglossal airway space (except the nasopharynx) three-dimensionally.

Comparison of automatic airway analysis function of Invivo5 and Romexis software

Background

Visualization and calculation of the airway dimensions are important because an increase of airway resistance may lead to life-threatening emergencies. The visualization and calculation of the airway are possible using radiography technique with their advance software. The aim of this study was to compare and to test the reliability of the measurement of the upper airway volume and minimum area using airway analysis function in two software.

Methods

The sample consisted of 11 cone-beam computed tomography (CBCT) scans data, evaluated using the Invivo5 (Anatomage) and Romexis (version 3.8.2.R, Planmeca) software which afford image reconstruction, and airway analysis. The measurements were done twice with one week gap between the two measurements. The measurement obtained was analyzed with t-tests and intraclass correlation coefficient (ICC), with confidence intervals (CI) was set at 95%.

Results

From the analysis, the mean reading of volume and minimum area is not significantly different between Invivo5 and Romexis. Excellent intrarater reliability values were found for the both measurement on both software, with ICC values ranging from 0.940 to 0.998.

Discussion

The results suggested that both software can be used in further studies to investigate upper airway, thereby contributing to the diagnosis of upper airway obstructions.

Comparison of the effects of rapid maxillary expansion and alternate rapid maxillary expansion and constriction protocols followed by facemask therapy

Objective

The aim of this retrospective study was to evaluate and compare the changes in the pharyngeal airway (PA), maxillary sinus volume, and skeletal parameters after rapid maxillary expansion (RME) and alternate rapid maxillary expansion and constriction (Alt-RAMEC) followed by facemask (FM) therapy.

Methods

The records of 40 patients with skeletal Class III malocclusion due to maxillary retrognathism were collected, and the patients were assigned into two groups. The first group comprised 8 male and 12 female patients (mean age, 10.0 ± 1.1 years) treated using RME/FM for an average of 10 months. The second group comprised 10 male and 10 female patients (mean age, 9.64 ± 1.3 years) treated using Alt-RAMEC/FM for an average of 12 months. Cone-beam computed tomography images acquired before (T0) and after treatment (T1) were evaluated.

Results

Regarding the skeletal effects, significant differences between the groups were the increase in ANS-HRP (perpendicular distance of ANS to the horizontal reference plane, 0.99 mm, p <0.05) in the Alt-RAMEC/FM group and the decrease in PP-SN (palatal plane to Sella-Nasion plane, 0.93°, p < 0.05) in the RME/FM group. Maxillary sinus volumes increased significantly in both the groups, and the increase was statistically significantly higher in the Alt-RAMEC/FM group. Although no significant intergroup differences were observed in PA volumes, both lower (1,011.19 mm³) and total (1,601.21 mm³), PA volume increased significantly in the Alt-RAMEC/FM group.

Conclusions

The different expansion devices and protocols used with FM therapy do not seem to affect the forward movement of the maxilla and PA volumes. In contrast, the increase in maxillary sinus volume was greater in the Alt-RAMEC/FM protocol.

Reliability of upper pharyngeal airway assessment using dental CBCT: a systematic review

Background

Upper airway analysis is an often-cited use of cone beam computed tomography (CBCT) imaging in orthodontics. However, the reliability of this process in a clinical setting is largely unknown.

Objective

Our objective was to systematically review the literature to evaluate the reliability of upper pharyngeal airway assessment using dental CBCT.

Search methods

MEDLINE, EMBASE, Web of Science, and Google Scholar were searched through June 2015.

Selection criteria

Human studies that measured reliability of upper airway assessment in patients using CBCT as part of the study protocol were considered.

Data collection and analysis

The Preferred Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA) was followed. Data were collected on overall study characteristics and measurements, CBCT unit and machine settings used, and examination characteristics of the included studies. Methodological quality of the included studies was evaluated.

Results

Forty-two studies were evaluated, representing the CBCT scans of 956 patients. Studies included a wide variety of patients and CBCT machines with various scan settings. Only five studies were deemed high quality. The available evidence indicates that under specific restricted conditions there is moderate to excellent intra- and inter-examiner reliability. Airway volume demonstrated greater intra- and inter-examiner reliability than did minimum cross-sectional area. However, significant methodological limitations of the current literature, most importantly a lack of manual orientation of the images and selection of threshold sensitivity in study protocols, suggest that reliability has not been adequately established.

Conclusions

The current literature reports moderate to excellent reliability, with airway volume having higher reliability than minimum cross-sectional area. However, only limited aspects of the process of airway analysis have been evaluated, indicating that further research is required to adequately establish the reliability of upper pharyngeal airway assessment of patients using dental CBCT.

Registration

None.

Cone Beam Computed Tomography in Orthodontics

Orthodontists treat malocclusions by applying three-dimensional forces. For years, the diagnosis of this three-dimensional condition and the related treatment plan has been based on two-dimensional imaging. Lateral and anteroposterior cephalometric, panoramic, and periapical radiographs are some of the two-dimensional radiographs routinely used in orthodontics. Despite being highly beneficial in evaluating skeletal and dental relations, these radiographs fail to provide sufficient two-dimensional information in certain cases. The purpose of this compilation is to review the use of cone-beam computed tomography in orthodontics.

Evaluation of tongue volume and oral cavity capacity using cone-beam computed tomography

The aims of this study were to reveal the usefulness of a newly developed method for measuring tongue volume (TV) and oral cavity capacity (OCC) and to assess the relationship between them. The tongue was coated with a contrast agent, and the TV and OCC were determined using cone-beam computed tomography (CBCT). We enrolled 20 adults who were scheduled to undergo CBCT to evaluate the relationship of the third molar roots to the alveolar nerve before molar extraction. Each participant’s tongue was coated with a contrast agent, and CBCT of the tongue and oral cavity was performed. Using computer software, we evaluated reconstructed 3D images of the TV, oral cavity proper volume (OCPV), and OCC. The mean TV was 47.07 ± 7.08 cm³. The mean OCPV and OCC were 4.40 ± 2.78 cm³ and 51.47 ± 6.46 cm³, respectively. There was a significant correlation between TV and OCC (r = 0.920; p < 0.01) but not between TV and OCPV. The mean TV/OCC ratio was 91 ± 5%. The proposed method produced CBCT images that enabled effective measurement of TV and OCC. This simple method of measuring TV and OCC will be useful in the diagnosis on the tongues with abnormal size.

Upper airway asymmetry in skeletal Class III malocclusions with mandibular deviation

The purpose of this study was to investigate the relationship between bilateral differences of upper airway and mandibular morphologic patterns in subjects with skeletal Class III mandibular deviation. 47 skeletal Class III (ANB < 0°) adult patients with and without mandibular deviation were divided into 2 groups. Bilateral differences of minimum cross-sectional area, mean cross-sectional area, volume of subdivisions (nasopharynx, palatopharynx, glossopharynx, hypopharynx) were assessed paired t test. Stepwise linear regression analysis and Pearson correlation coefficients were computed between a significant pair of upper airway variables and a pair of mandibular deviation variables to examine the quantitative relationship between the upper airway asymmetry and mandibular deviation. The mean cross-sectional area and the volume of palatopharynx on the deviated side in mandibular deviated group was significantly smaller than non-deviated side. The asymmetry index of the palatopharyngeal volume showed significant correlations with CRA asymmetry (r = 0.49) and Ramus asymmetry (r = 0.54). However, in the glossopharyngeal and hypopharyngeal segment, the mandibular deviated group showed significant asymmetry, characterized by larger mean cross-sectional area and volume in deviated side. The asymmetry index of the glossopharyngeal volume and hypopharyngeal volume showed significant correlations with CRA asymmetry (r = 0.42), Me-s (r = 0.72) and Me-s (r = 0.67) respectively.

Relationships among nasal resistance, adenoids, tonsils, and tongue posture and maxillofacial form in Class II and Class III children

INTRODUCTION

The purpose of this study was to clarify the relationships between upper airway factors (nasal resistance, adenoids, tonsils, and tongue posture) and maxillofacial forms in Class II and III children.

METHODS

Sixty-four subjects (mean age, 9.3 years) with malocclusion were divided into Class II and Class III groups by ANB angles. Nasal resistance was calculated using computational fluid dynamics from cone-beam computed tomography data. Adenoids, tonsils, and tongue posture were evaluated in the cone-beam computed tomography images. The groups were compared using Mann-Whitney U tests and Student t tests. The Spearman rank correlations test assessed the relationships between the upper airway factors and maxillofacial form.

RESULTS

Nasal resistance of the Class II group was significantly larger than that of the Class III group (P = 0.005). Nasal resistance of the Class II group was significantly correlated with inferior tongue posture (P <0.001) and negatively correlated with intermolar width (P = 0.028). Tonsil size of the Class III group was significantly correlated with anterior tongue posture (P <0.001) and mandibular incisor anterior position (P = 0.007). Anterior tongue posture of the Class III group was significantly correlated with mandibular protrusion.

CONCLUSIONS

The relationships of upper airway factors differ between Class II and Class III children.

Herbst appliance effects on pharyngeal airway ventilation evaluated using computational fluid dynamics

OBJECTIVE

To evaluate the effect of a Herbst appliance on ventilation of the pharyngeal airway (PA) using computational fluid dynamics (CFD).

MATERIALS AND METHODS

Twenty-one Class II patients (10 boys; mean age, 11.7 years) who required Herbst therapy with edgewise treatment underwent cone-beam computed tomography (CBCT) before and after treatment. Nineteen Class I control patients (8 boys; mean age, 11.9 years) received edgewise treatment alone. The pressure and velocity of the PA were compared between the groups using CFD based on three-dimensional CBCT images of the PA.

RESULTS

The change in oropharyngeal airway velocity in the Herbst group (1.95 m/s) was significantly larger than that in the control group (0.67 m/s). Similarly, the decrease in laryngopharyngeal airway velocity in the Herbst group (1.37 m/s) was significantly larger than that in the control group (0.57 m/s).

CONCLUSION

The Herbst appliance improves ventilation of the oropharyngeal and laryngopharyngeal airways. These results may provide a useful assessment of obstructive sleep apnea treatment during growth.

Three-Dimensional Evaluation of the Upper Airway in Children of Skeletal Class III

The present study was aimed to investigate the relationship of the upper airway size and craniofacial structures in 3 dimensions in growing children of skeletal Class III. Forty-seven children (19 boys and 28 girls, 9.6 ± 1.3 years of age, range 8.0-12.4 years) were selected. Twenty-three children with normal vertical development were divided into groups of insufficient maxilla and overdeveloped mandible for the airway comparison between different sagittal skeletal patterns. Thirty-two children with the same sagittal development were divided into groups of low angle, normal angle, and high angle for the comparison between different vertical skeletal developments. The upper airway and craniofacial structures were measured in cone beam computed tomography images using DOLPHIN 11.7 software. Mann-Whitney U test and Kruskal-Wallis test were used to analyze the airway differences between groups. Spearman correlated analysis was done between the upper airway size and the craniofacial pattern in the transverse dimension. The results showed that the nasopharynx was the only affected airway part between groups of insufficient maxilla and overdeveloped mandible (P <0.05). The high angle group showed smaller upper airway compared with the groups of normal angle and low angle (P <0.05). The skeletal transverse dimension was correlated with the height of velopharynx, hypopharynx, and total airway with small gender differences.

Changes in Upper Airway Volume Following Orthognathic Surgery

Reduced volume of the internal skeletal dimensions of the face is 1 of the main causes of obstructive sleep apnea, and attention to patients' airways is necessary when planning orthognathic treatment. This study aims to describe changes in upper airway volume following virtually planned orthognathic surgery.A retrospective pilot study was designed with 30 randomly selected patients (10 men and 20 women, aged 23.1 ± 6.8 years, molar-relations: 15 neutral, 8 distal, and 7 mesial). Cone-beam computed tomography scans were performed before surgery and 1 week following surgery. The authors did total upper airway volume measurements and obtained 1-mm slices at vertical levels in the velo-, oro-, and hypopharynx and at the smallest visible cross-section.Measurements before and after surgery were compared using Student t test.After orthognathic surgery, the minimum cross-sectional area at the vertical level increased from 83 mm ± 33 before surgery to 102 mm ± 36 after surgery (P = 0.019). In patients with neutral and distal occlusions, the minimum cross-sectional slice volume increased in 87% but in only 57% with mesial occlusion.The present findings suggest that orthognathic surgery increases upper airway volume parameters, but a few patients have continued impairment of the airways following orthognathic surgery. Further studies are needed to confirm an individual surgical planning approach that potentially could bring the minimum cross sectional area out of the risk zone.

Risk factors for small pharyngeal airway dimensions in preorthodontic children: A three-dimensional study

OBJECTIVE

To analyze which parameters, gathered from standard orthodontic diagnostic material, were most relevant for identifying small pharyngeal airway dimensions in preorthodontic children.

MATERIALS AND METHODS

The sample was composed of 105 cone beam computed tomography scans of healthy preorthodontic children (44 boys, 61 girls; mean age, 10.7 ± 2.4 years). Airway volume and minimal cross-sectional area were three-dimensionally assessed. Cephalometric features and skeletal maturity were assessed on generated two-dimensional cephalograms. Associations were analyzed and adjusted for age, gender, and skeletal maturity by multiple regression analyses.

RESULTS

Airway volume and minimal cross-sectional area were significantly smaller in prepubertal children (P < .001, P < .05, respectively) and positively associated with age (P < .001, P < .01, respectively). After adjustment of age, skeletal maturity and gender significant associations were found between pharyngeal airway dimensions and craniofacial morphology. Airway volume was positively associated with maxillary and mandibular width (P < .01; P < .001, respectively) and anterior face height (P < .05; P < .05, respectively). Minimal cross-sectional area was positively associated with maxillary and mandibular width (P < .01; P < .001, respectively) and negatively associated with sagittal jaw relationship (AnPg, P < .05). Mandibular width and age were the most relevant factors for airway volume (r² = 0.36). Mandibular width and sagittal jaw relationship were the most relevant factors for minimal cross-sectional area (r² = 0.16).

CONCLUSION

Pharyngeal airway dimensions were significantly associated with age, skeletal maturity, and craniofacial morphology in all three planes. Children with a reduced mandibular width and increased sagittal jaw relationship are particularly at risk of having small pharyngeal airway dimensions.

Determination of size-specific exposure settings in dental cone-beam CT

OBJECTIVES

To estimate the possible reduction of tube output as a function of head size in dental cone-beam computed tomography (CBCT).

METHODS

A 16 cm PMMA phantom, containing a central and six peripheral columns filled with PMMA, was used to represent an average adult male head. The phantom was scanned using CBCT, with 0-6 peripheral columns having been removed in order to simulate varying head sizes. For five kV settings (70-90 kV), the mAs required to reach a predetermined image noise level was determined, and corresponding radiation doses were derived. Results were expressed as a function of head size, age, and gender, based on growth reference charts.

RESULTS

The use of 90 kV consistently resulted in the largest relative dose reduction. A potential mAs reduction ranging from 7 % to 50 % was seen for the different simulated head sizes, showing an exponential relation between head size and mAs. An optimized exposure protocol based on head circumference or age/gender is proposed.

CONCLUSIONS

A considerable dose reduction, through reduction of the mAs rather than the kV, is possible for small-sized patients in CBCT, including children and females. Size-specific exposure protocols should be clinically implemented.

KEY POINTS

• Fixed exposure settings in CBCT results in overexposure for smaller patients • For children, considerable dose reduction is possible without compromising image quality • A reduction in mAs is more dose-efficient than a kV reduction • An optimized exposure protocol was proposed based on phantom measurements • This protocol should be validated in a clinical setting.

The Oropharyngeal Airway in Young Adults with Skeletal Class II and Class III Deformities: A 3-D Morphometric Analysis

Objectives

1) To determine the accuracy and reliability of an automated anthropometric measurement software for the oropharyngeal airway and 2) To compare the anthropometric dimensions of the oropharyngeal airway in skeletal class II and III deformity patients.

Methods

Cone-beam CT (CBCT) scans of 62 patients with skeletal class II or III deformities were used for this study. Volumetric, linear and surface area measurements retroglossal (RG) and retropalatal (RP) compartments of the oropharyngeal airway was measured with the 3dMDVultus software. Accuracy of automated anthropometric pharyngeal airway measurements was assessed using an airway phantom.

Results

The software was found to be reasonably accurate for measuring dimensions of air passages. The total oropharyngeal volume was significantly greater in the skeletal class III deformity group (16.7 ± 9.04 mm³) compared with class II subjects (11.87 ± 4.01 mm³). The average surface area of both the RG and RP compartments were significantly larger in the class III deformity group. The most constricted area in the RG and RP airway was significantly larger in individuals with skeletal class III deformity. The anterior-posterior (AP) length of this constriction was significantly greater in skeletal class III individuals in both compartments, whereas the width of the constriction was not significantly different between the two groups in both compartments. The RP compartment was larger but less uniform than the RG compartment in both skeletal deformities.

Conclusion

Significant differences were observed in morphological characteristics of the oropharyngeal airway in individuals with skeletal class II and III deformities. This information may be valuable for surgeons in orthognathic treatment planning, especially for mandibular setback surgery that might compromise the oropharyngeal patency.

Three-Dimensional Evaluation of the Upper Airway Morphological Changes in Growing Patients with Skeletal Class III Malocclusion Treated by Protraction Headgear and Rapid Palatal Expansion: A Comparative Research

Objective

The aim of this study was to evaluate the morphological changes of upper airway after protraction headgear and rapid maxillary expansion (PE) treatment in growing patients with Class III malocclusion and maxillary skeletal deficiency compared with untreated Class III patients by cone-beam computed tomography (CBCT).

Methods

Thirty growing patients who have completed PE therapy were included in PE group. The control group (n = 30) was selected from the growing untreated patients with the same diagnosis. The CBCT scans of the pre-treatment (T1) and post-treatment (T2) of PE group and the control group were collected. Reconstruction and registration of the 3D models of T1 and T2 were completed. By comparing the data obtained from T1, T2 and control group, the morphological changes of the upper airway during the PE treatment were evaluated.

Results

Comparing with the data from T1 group, the subspinale (A) of maxilla and the upper incisor (UI) of the T2 group were moved in the anterior direction. The gnathion (Gn) of mandible was moved in the posterior-inferior direction. The displacement of the hyoid bone as well as the length and width of dental arch showed significant difference. The volume and mean cross-sectional area of nasopharynx, velopharynx and glossopharynx region showed significant difference. The largest anteroposterior/the largest lateral (AP/LR) ratios of the velopharynx and glossopharynx were increased, but the AP/LR ratio of the hypopharynx was decreased. In addition, the length and width of the maxillary dental arch, the displacement of the hyoid bone, the volume of nasopharynx and velopharynx, and the AP/LR ratio of the hypopharynx and velopharynx showed significant difference between the data from control and T2 group.

Conclusion

The PE treatment of Class Ⅲ malocclusion with maxillary skeletal hypoplasia leads to a significant increase in the volume of nasopharynx and velopharynx.

A comparative study of the pharyngeal airway space, measured with cone beam computed tomography, between patients with different craniofacial morphologies

PURPOSE

The present study aims to determine any existing association between airway dimensions, measured with cone beam computed tomography (CBCT), and the different patient craniofacial morphologies.

MATERIAL AND METHODS

Sixty CBCT (Dental Picasso Master 3D) images, from patients treated at the Orthodontics Master at Valencia University were selected. The program InVivoDental 5.1 was used to visualize sections, analyze three-dimensional images, and perform airway measurements in the three planes of the space. Intra- and interobserver error methods were recorded. After that, measurements at three different levels of the airway (upper, medium, lower) were taken, in both the anteroposterior and transversal directions of the airway space. The area (mm(2)) of the airway space at the three levels was also measured.

RESULTS

In the anteroposterior airway measurements, there were differences between the measurements by level. The magnitude of these differences depended on the skeletal pattern of the individual. In the transversal airway measurements and in the area airway measurements, there were no differences according to the skeletal pattern. However, in the transversal direction, measurements in the lower level were significantly higher than in the superior level in all cases. When measuring the area, significantly higher measurements in the upper level were recorded. The homogeneity between medium and lower levels decreased gradually from class I to class III subjects.

CONCLUSIONS

No statistically significant results were observed that related the anteroposterior and vertical skeletal craniofacial morphology with airway dimensions, although some specific associations have been detected for certain airway levels or for pattern combinations.

Comparative analysis of upper airway volume with lateral cephalograms and cone-beam computed tomography

INTRODUCTION

In this study, we aimed to evaluate the adenoidal nasopharyngeal ratio (ANR) on lateral cephalograms by assessing upper airway volumes using cone-beam computed tomography (CBCT) images as the validation method.

METHODS

Fifty-five patients were included in the study, and it was essential that the lateral cephalograms and CBCT images taken at their examinations were not more than 1 week apart. There were 32 subjects in group A (age ≤15 years) and 23 subjects in group B (age >15 years). The ANR was measured on the lateral cephalograms. The area and volumetric measurements of the nasopharynx and the total upper airway were obtained from CBCT images. Repeated measurements of the ANR and airway volume were performed on 10 subjects by 2 observers.

RESULTS

Group A had a higher correlation (r = -0.78) between the ANR and the nasopharynx volume than did group B (r = -0.57). The ANR had a weak correlation with the total upper airway volume (group A, r = -0.48; group B, r = -0.32). Both measurements made on lateral cephalograms and CBCT were highly reproducible in terms of intraobserver and interobserver agreement.

CONCLUSIONS

Based on our results, the measurement of the ANR on lateral cephalograms can be used as an initial screening method to estimate the nasopharynx volumes of younger patients (age ≤15 years).

[The effect of orthodontic treatment on the change of oropharynx features in patients with dentoalveolar anomalies and nasopharyngeal tonsil hypertrophy]

The paper presents the results of comprehensive survey and orthodontic treatment of 40 children with dentoalveolar anomalies and nasopharyngeal tonsil hypertrophy aged 7-9 years. The linear parameters obtained by cone beam CT and TWH in the lateral projection were analyzed. The study revealed changes, indicating that the presence of nasopharyngeal tonsil hypertrophy, leads to pathology of the dental system and estimated the efficiency of muscle training and combined use of functional devices and elastopositioner «Corrector» for the treatment of anomalies of dentition and the formation of physiological occlusion in the process of permanent teeth eruption.

Three-dimensional upper-airway assessment in patients with bronchial asthma

OBJECTIVE

To assess the upper airway (UAW) total volume (TV), the nasopharyngeal narrowest area (NNA), and the oropharyngeal narrowest area (ONA) in patients with bronchial asthma.

MATERIALS AND METHODS

The sample consisted of 52 patients divided into two groups: the control group (n  =  26; mean age  =  14.85 years), which consisted of patients not suffering from bronchial asthma; and the asthmatic group (n  =  26; mean age  =  16.65 years), which consisted of patients with bronchial asthma. To assess UAW-related variables (TV, NNA, and ONA), cone-beam computed tomography scans of the patients were evaluated by means of the Dolphin Imaging software 11.5. All measurements were repeated after 30 days, and the results were submitted to reliability tests by means of the intraclass correlation coefficient and the Bland-Altman agreement test. The values obtained for TV, NNA, and ONA for each group were compared by using Student's t-test for independent samples (5% level of significance).

RESULTS

The results showed that the groups were matched concerning gender, cephalometric characteristics, and type of malocclusion. The asthmatic group had significantly lower TV (P  =  .01) and ONA (P  =  .007) than the control group. However, no significant difference was observed for NNA between the groups (P  =  .54).

CONCLUSIONS

Bronchial asthma may be a determining factor for the reduction of UAW dimensions, as patients with asthma showed significant reductions in TV and ONA dimensions.

Comparison of reliability of lateral cephalogram and computed tomography for assessment of airway space

BACKGROUND AND AIMS

The oropharyngeal (OP) and nasopharyngeal structures seems to play roles in the development of the dentofacial complex. Soft palate as a part of nasopharyngeal and OP apparatus has an important role in phonation, deglutition and respiration. The aim of this study was to find whether any correlation exists between the three types of malocclusion and airway space using lateral cephalogram and computed tomography (CT) and to compare its reliability. To obtain important information on the morphology of the soft palate on lateral cephalogram and to determine its etiopathogenesis in obstructive sleep apnea (OSA).

MATERIALS AND METHODS

Lateral cephalogram of 45 subjects were used to measure the pharyngeal airway. The subjects were divided into three groups (each group included 15 subjects) according to ANB angle: Class I (ANB angle 2-4°), Class II (ANB angle > 4°), Class III (ANB angle ≤ 2°).

RESULTS

The result showed a significant reduction in pharyngeal airway in ANB Class II. Type I soft palate, leaf-shape was found in maximum subjects. The volume of airway size showed higher statistical significance with the greater coefficient of variation on CT in relation to corresponding cephalometric airway area.

CONCLUSION

The sagittal skeletal pattern is a contributory factor in variations in the upper airway dimensions. The measurements acquired from both the modalities are reliable and reproducible, but CT gives the better assessment of cross-sectional dimensions of airway space. Morphology of the soft palate can be used as references for etiological research of OSA.

The influence of craniofacial morphology on the upper airway dimensions

Objective: 

To evaluate the influence of craniofacial morphology on the upper airway dimensions in healthy adult subjects.

Materials and Methods: 

The records of 276 healthy 17- to 27-year-old patients were extracted from the cone-beam computed tomography image database of the Institute of Stomatology, Riga Stradins University. Dolphin 11.7 software was used to evaluate craniofacial anatomy and semiautomatic segmentation of the upper airway. Measurements of oropharyngeal airway volume (OPV), minimal cross-sectional area (CSAmin), and nasopharyngeal airway volume (NPV) were obtained. The presence of adenoid tissues was recorded. Associations between variables were analyzed by Spearman's correlation coefficients, and multivariate linear regression analysis was used to identify factors that had a possible influence on upper airway dimensions.

Results: 

The following factors were identified as influencing the variability of NPV (23%): SNA angle, gender, and presence of adenoids. Statistically significant, although weak, correlations were found between SNB angle and OPV (r  =  0.144, P &lt; .05) and CSAmin (r  =  0.182, P &lt; .01).

Conclusion: 

The results suggest that craniofacial morphology alone does not have a significant influence on upper airway dimensions.

The effect of rapid maxillary expansion on pharyngeal airway pressure during inspiration evaluated using computational fluid dynamics

INTRODUCTION

Recent evidence suggests that rapid maxillary expansion (RME) is an effective treatment of obstructive sleep apnea syndrome (OSAS) in children with maxillary constriction. Nonetheless, the effect of RME on pharyngeal airway pressure during inspiration is not clear. The purpose of this retrospective study was to evaluate changes induced by the RME in ventilation conditions using computational fluid dynamics.

METHODS

Twenty-five subjects (14 boys, 11 girls; mean age 9.7 years) who required RME had cone-beam computed tomography (CBCT) images taken before and after the RME. The CBCT data were used to reconstruct 3-dimensional shapes of nasal and pharyngeal airways. Measurement of airflow pressure was simulated using computational fluid dynamics for calculating nasal resistance during exhalation. This value was used to assess maximal negative pressure in the pharyngeal airway during inspiration.

RESULTS

Nasal resistance after RME, 0.137 Pa/(cm(3)/s), was significantly lower than that before RME, 0.496 Pa/(cm(3)/s), and the maximal negative pressure in the pharyngeal airway during inspiration was smaller after RME (-48.66 Pa) than before (-124.96 Pa).

CONCLUSION

Pharyngeal airway pressure during inspiration is decreased with the reduction of nasal resistance by the RME. This mechanism may contribute to the alleviation of OSAS in children.

The relationship of vertical skeletofacial morphology to oropharyngeal airway shape using cone beam computed tomography: possible implications for airway restriction

OBJECTIVE

To determine if the shape of the oropharyngeal airway is related to the vertical morphology of the skeletofacial complex, including the hyoid bone.

MATERIALS AND METHODS

Cone beam computed tomography scans from 50 pretreatment adult orthodontic records were used to obtain skeletal and airway measurements. Linear regression statistics were used to compare soft tissue variables to hard tissue predictor variables.

RESULTS

Transverse airway widening was significantly increased when the distance between the hyoid and vertebrae was reduced; when the three-dimensional (3D) facial axis angle decreased (became more vertical); when the 3D mandibular plane angle increased; when the width of the hyoid increased, or when the calculated length of the geniohyoid decreased.

CONCLUSIONS

A laterally elliptical airway-found when the face is more vertical and when the hyoid is closer to the cervical vertebrae-is hypothetically more resistant to collapse. Patients with a retrognathic, skeletal deep bite and a rounded oropharynx should be identified and corrected early to prevent potential airway problems.

Role of mandibular displacement and airway size in improving breathing after rapid maxillary expansion

BACKGROUND

Oral breathing and maxillary deficiency are often associated with steep mandibular plane angle, and retrognathic mandible compared with the faces of healthy controls. Some studies suggested that after rapid maxillary expansion, improvement in nasal breathing and repositioning of mandible with transitory increasing of facial height and, in some cases, spontaneous forward repositioning might occur. The above-mentioned mandibular effects could contribute to enlarge oropharynx volume with repositioning of tongue and soft palate with an improvement of upper airway volume after treatment. The aim of this study was to investigate by cone beam computed tomography the role of oropharyngeal volume and mandibular position changes after rapid maxillary expansion in patients showing improved breathing pattern confirmed by polysomnography exam.

METHODS

The final sample of this retrospective study comprised 14 Caucasian patients (mean age 7.6 years) who undergone rapid maxillary expansion with Haas-type expander banded on second deciduous upper molars. Cone beam computed tomography scans and polysomnography exams were collected before placing the appliance (T0) and after 12 months (T1). Mandibular landmarks localization and airway semiautomatic segmentation on cone beam computed tomography scans allowed airway volume computing and measurements.

RESULTS

No significant differences were found between oropharyngeal airway changes and mandibular displacement after rapid maxillary expansion in growing patients.

CONCLUSIONS

The suggested improvement in upper airway and breathing after rapid maxillary expansion should be further related to different compartments of airway such as rhinopharynx and nasal cavity.